Professional Documents
Culture Documents
Manitou Telescopic
Mt-X 1033 mining
Torque Converter SACHS Fuse board & main harness Ultimate Fuse Board protection system
Number of gears (forward/reverse) 4/4 Wiring and other electrical Ultimate Wiring protection system
components (standard in Australia MDG15, option other
Front & Rear axles / Differential DANA / Limited slip country)
front rigid - rear oscillating
Exhaust
Drive Wheels permanent 4 wheel drive in accordance with EPA CTM 022 1995, MANITOU Safe Exhaust System - purifier &
Tyres 400/80-24 EPA CTM 030 1997, UNI EN 126719:2013, diluter
UNI EN 13284-1:2003, including variable reduce exposure to toxic gas: -85% (volume)
optional NOKIAN 12.00-20 Armor Gard Mine
engine rpm cycles to simulate real -50% (mass) -60% (temperature)
Max. travel speed 27 kph working environment.
(may vary according to applicable regulations)
Exhaust protection Exhaust lines & muffler insulation blanket
Steering mode 4 wheel steer - 3 steering modes
(standard in Australia MDG15, option other
Uphill/downhill safe operating grade up to 1:4 (25%) country)
Laden drawbar pull 9100 daN Fire prevention & control
Towable mass on trailer Extinguisher(s) 2x 9 kg Powder
with no braking 1500 kg Prevention Engine Compartment Fire Prevention System
(standard in Australia MDG15, option other
with independent braking 3000 kg country)
with assisted braking (hydraulic or 6000 kg
pneumatic)
Mt-X 1033 mining
A (mm) 1200
B (mm) 2690
Ergonomics, access, visibility C (mm) 1513
LED Lights & Cameras 360° Visibility Safety System D1 (mm) 5081
D2 (mm) 4050
Work lights LED 3200 lux (2x front 2x rear 2x boom)
E (mm) 6192
Cameras blind spots on right hand side and rear F (mm) 1846
Other fwd/rev directionnal lights, rear light on when rev F1 (mm) 1846
G (mm) 455
Markings, Signs, Labelling warning & danger, controls & pre-op, refelctive hi-visibility,
access & maintenance point G1 (mm) 440
G2 (mm) 440
Isolation points & miscellaneous
G3 (mm) 220
Emergency stops cabin x1 - External x2 I (mm) 789
T (mm) 3640
Fuel 120 l
U1 (mm) 2300
Noise and vibration U2 (mm) 2550
V2 (mm) 3800
Vibration to whole hand/arm <2.5 m/s2
V3 (mm) 4200
Vibration on driver’s body 1.015 m/s2 W (mm) 2250
W2 (mm) 1132
Weight (not Access version) 7525 kg Unladen (with forks)
Y (°) 11,9
Z (°) 113,7
Mt-X 1033 mining
2500kg
9 40° 9 D
D
8 8 C
C
7 7
30° B B
30°
6
A 6 A
2900kg
2900kg
2000kg
2500kg
20°
1500kg
2000kg
4 20°
4
1200kg
1500kg
800kg
1200kg
600kg
3
10°
400kg
800kg
2 10°
100kg
1
1
0°
0m 0°
B A 0m D C B A
-5° D C 0.6m E
E
-1 -0.5
7 6 5 4 3 2 1 0m 7 6 5 4 3 2 1 0m 0.6m
7.3
5.15
4.4
2.34
1.9
1.66
7.25
5.2
4.45
3.8
3.35
1.62
Machine on tyres with PC 30/40/50 Machine on Stabilizer with PC 30/40/50
(Norm EN1459-B) (Norm EN1459-B)
11 11
10.08 64.2°
10 10
60° 60°
9.73 61°
9 9
50° 50°
8 45° 8
40° 40°
7 7
6 6
30° 30°
3000KG
5 5
2500KG
2500KG
2000KG
1600KG
1200KG
2000KG
1600KG
4 20° 4
800KG
20°
600KG
400KG
1200KG
200KG
100KG
3 3
800KG
0KG
600KG
10° 10°
2 2
1 1
0° 0°
0 0
-4,8°
-1 -1
8 7 6 5 4 3 2 1 0m 8 7 6 5 4 3 2 1 0m
7.06
5.95
5.45
4.93
4.05
3.45
2.85
2.30
1.90
1.45
1.39
6.95
6.25
4.70
3.60
3.20
1.34
5.30
4.00
Mt-X 1033 mining
11 11
61°
10.08 64.2°
10 10 E
60° E 60°
9.73
9 9 D
50° D 50°
8 45° 8 C
C
40° 40°
7 7 B
B
6 6 A
A
30° 30°
3000KG
5 5
2500KG
2500KG
2000KG
1600KG
1200KG
2000KG
4 20° 4 20°
800KG
1600KG
600KG
400KG
1200KG
200KG
100KG
3
0KG
800KG
600KG
10° 2 10°
2
1 1
0° 0°
0 0
-4.8°
-1 -1
8 7 6 5 4 3 2 1 0m 8 7 6 5.30 5 4 3 2 1 0m
4.70
4.00
3.60
3.20
6.95
6.25
1.34
7.06
5.95
5.45
4.93
4.05
3.45
2.85
2.30
1.90
1.45
1.39
10 9.9010
40°
9,50 40°
9 9
8 8
30° 7 30° 7
6 6
0kg 0kg
5 5
20° 20° 4.5
4.5
2000kg
4 4
1500kg
2000KG
3 3
1500KG
10°
1000KG
10°
1000kg
500kg
500KG
2 2
200KG
100kg
1 1
0°
0°
0m 0m
-2.5°
-5° 0,6m
0.6m
-1 -1
7 6 5 4 3 2 1 0m 7 6 5 4 3 2 1 0m
7.60 6.75 4.60
5.10 2.55
3.15 2.10 7.55 5.45
Mt-X 1033 mining
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right
to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ
from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are
provided for information only.
MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
FT174EN_A_0919_MTX1033_Mn