Professional Documents
Culture Documents
TUTORIAL MOVE 2009.1: 3D Model Construction From Surface Geological Data
TUTORIAL MOVE 2009.1: 3D Model Construction From Surface Geological Data
Contact: fabrizio.berra@unimi.it
This tutorial derives from the experience of a group of MSc theses at the Università degli Studi di
Milano, Dipartimento di Scienze della Terrra “A. Desio” in the frame of the Field Mapping Initiative of
Midland Valley Exploration Ltd, Glasgow. The described procedure have been followed to obtain 3D
models from surface geological data.
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
DTM IMPORT
File: adf
Module 4D MOVE: file Æ insert dataÆ choose the gis data-vector files format
File: shp
Module 4DMOVE: file Æ insert dataÆ choose the gis data-vector files format
in file type Æ open Æselect import as object Æ next Æ if you insert attributes in the GIS
database, you can import them directly in Move: you can read the attributes selecting the
column of the attribute table (e.g. you can attribute different colours to the limits according
to the attribute “NAME OF THE COLUMN” (i.e. ”BASE OF”) if you stored it in the GIS:
in preview select use attribute to colour object and select the attribute “NAME OF THE
COLUMN”)
NB With this procedure is the program itself that match automatically the colours with the
limits; to change the colours select Colour table.
Æ load
1.2 FIELD (DIP) DATA IMPORT
The data table must be composed of at least 4 columns: X, Y, DIP, DIP AZIMUTH.
To obtain X &Y coordinates from ESRI GIS you can use this 2 different ways:
Arc View:
Create two new columns called X and Y in the attribute table Æ select Calculate Æ
Write:
Shape.getX in the X column
Shape.getY in the Y column
Arc Map:
2
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
Create two new columns called X and Y in the attribute table Æ right click on the column
headingÆ Calculate geometry Æ Property, choose X or Y
EXCEL: open dbf file related to the shp saved in GIS Æ save as “delimited tabulation txt”
in 2D MOVE: file Æ insert Æ ASCII file Æ choose dip data, select elevation and choose
3D as type Æ in the same window click on data type delimited Æ click on set (open the
table) Æ give the names: X, Y, DIP, DIP AZIMUTH to the right column Æ right click on
the column heading Æ Ok Æ Ok
File: mve
When opened, a green slicer plane and a red arrow normal to the plane appear in the main
graphic window. The slicer plane can be oriented either by adjusting the azimuth and dip of
the normal or by snapping the plane to a map EW or NS orientation.
In the window:
Reference point: translate the slicer plane from the point of intersection between the normal
and the slicer plane;
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
Application mode: toggle between cross section contour and slicer mode
Chop plan: controls range of contours (Auto give the same interval as the kilometrical grid
Manual: you can choose the interval value (if you want to built only one section this value
must be 0).
ÆApply. Click the right below arrow to visualize the sections and save in mve format or
export them in 2DMove (in this way you have to save them in 2d move!).
File: mve
The section is visualized as a black line. Right click on it and select fit section trace Æa red
line will appear superimposed on the black one. In this way the line became a section.
To visualize the topographic profile you should click on the line with the right click and
select view section.
2D Move: click right on the section Æ collect intersections; the software visualize the cross
(intersection between section and limits) on the profile.
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
projection toolbox opens:
In Projection: specify the way you want to project the field (dip) data (es. along strike,
along dip); select section trace that you want and click add.
In Auto options: specify field (dip) data. In distance: insert the widest ( maximum) distance
of the values to be projected on the section. Finally click apply in auto options.
After this job you can visualize the topographic profile, the dip data and intersections at the
same time. Then you can print the sections.
File: mve
The geological cross sections have been drawn on paper, starting from the profiles produced
in 2DMove and collecting/projecting data on them. The manual drawing on paper resulted
to be the most precise way to produce precise geological cross sections.
Select use set scale (1:) and insert the scale in the X and Y fields.
File: TIFF (from ArcMap click on export image and save as TIFF)
3D MOVE: file Æ load image, insert the edge coordinates (from Arc Map) to fit the image
in the right position; properties: select DTM Æ the georeferenziate imagine will be
projected on the topography.
Draw sections by hands; scan them and import them in the software.
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
1.12 IMPORT OF THE HAND-DRAWN GEOLOGICAL CROSS SECTIONS
File: (JPEG)
in position select world and insert the edge coordinates of the image Æ apply.
file: mve
Clicking right on the line editing you can add or remove nodes (Add Node, Remove Node).
in Bed Height insert the thickness in meters of the bed you are creating;
select Construct Above if you want to create the line above the reference one,
otherwise select Construct Below.
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
Select Interactive Mode Æ Create;
you can define the angle between the reference line and the one to be created:
Select Create at Angle and insert the value in degrees (°) ÆCreate.
Template Line is the line to be restored to the reference line or to a certain high
(insert the high in the field Elevation); select the line Æ Add;
insert the other lines to be restored together with the Template Line in Other Objects
Æ Add;
File: mve
Select the lines you want to construct the surface with Æ Collect in Template Beds Æ click
Create Surface
• Tools Æ Rugosity Filter (select the surface Æ click Collect Æ select the options
Rugosity wavelength or density to smooth the surface; you can choose the smoothing
percentage changing the value of Interpolation parameter % Æ Apply.
• To cut surfaces: Mode Æ Cutting Surfaces; Options Æ Cut Surface using Surface;
select the surface to be cut Æ click Collect in Collect surface to be cut; select the
“blade” surface Æ click Pick in Surface Æ Apply. You can cut surfaces also using
the tool Mode Æ Separating Surfaces .
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009
• To extend surfaces: Mode Æ Extending surface; Options Æ Snap Surfaces to
Surface; select the surface to be extended Æ click Collect in Collect the surfaces to
snap; select the reference surface Æ click Pick in Surface Æ Apply. With the option
Extend Surface to UTM boundary you can also extend surfaces to the edge of the
grid.
You can extend surfaces also with the tool Create Æ Snap to Surface: select the surface to
be extended Æ click Pick in Surface to Snap; select the reference surface Æ click Collect in
Target Surfaces.
To join surfaces: Edit Æ Group; the surfaces belonging to the same group can be joined:
Edit Æ Fuse Patches.
Create Æ Project Surface From Line; select the Source Line (the line from which you want
to project the surface) and click on Collect. Insert the projection direction value (Azimuth)
and the angle to the horizontal value (Dip) Æ Apply.
In this way you can construct vertical surfaces with which you can cut lines to obtain
smaller surfaces:
Select the lines to be cut and click on Collect; select the surface (created with Project
Surface From Line) and click Pick Æ Apply.
Università degli Studi di Milano ‐ Midland Valley Field Mapping Initiative – October 2009