INSTALLATION AND OPERATING INSTRUCTION,
Automatic Transfer Switch
OTM_C_21D
‘Automatic Transfer switel
SC
3407TM_C_21D rev. B.Table of contents
003-004
005-008
009-012
013-016
017
018-020
021-022
023
024
symbols & Terms
Product overview
Quick start
Interface and Settings
Technical data
Installation
Optional accessories
Maintenance and common troubleshooting
AppendixAUTOMATIC TRANSFER SWITCH, OTM_C_21D
Symbols & Terms
A
AN
@
A
Risk of Electric shock: Warns about a situation where ahazardous voltage may cause
physical injury to a person or damage to equipment.
General warning: Warns about a situation where something other than electrical
equipment may cause physical injury to a person or damage to equipment.
cautios
: Provides important information or warns about a situation that mayhave a
detrimental effect on equipment
Information: Provides important information about the equipment
Explanations of abreviations and terms
‘oTM_c_2iD ‘Automatic transfer switch, the type name
LINE-Switeh | Power supply line, e.g. the primary ine
LN2-Swaiteh Power supply line, e.g. the secondary line used in emergency cases
EMERG OFF Used to drive the automatic transfer switch transfers to the “O” position when
(fire control system) receiving EMRG OFF signal
AUTO ‘Automatic mode
Remote test A sequence to test the functionality of the automatic transfer switch
Ts Switching delay
Tes Back switching delay
ov Adjustable overvoltage threshold
w Adjustable undervoltage threshold
‘Table 1 Explanations of abbreviations and terms