Professional Documents
Culture Documents
Simba M4 C-ITH
Technical specification
www.atlascopco.com
M4 C-ITH
M4 C-ITH
Production drilling rig with pneumatic in the hole hammer, ITH, for
deep straight holes. The Rig Control System (RCS) provides ef-
ficient and high precision long hole drilling, and also ensures an
ergonomic working environment and longer consumable life. Ring
drilling with parallel holes upwards/downwards up to 3 m apart.
Hole diameter 95–178 mm.
Standard features
»Rock drill »»Control system
• Pneumatic in the hole hammer, ITH (hammer not • Rig Control System (RCS)
supplied with rig) • Automation level: ABC Basic
• Rotation unit DHR 48H • Angle reading instrument
• Rotation Pressure Controlled feed (RPCF)
»»Drilling unit • Pre-set parameters for different drilling conditions
• Hold-back pressure control
• Mechnized rod handling system
• Feed with hydraulic two-stage cylinder
• Front- and rear-mounted stingers »»Carrier
• Breakout table for guidance during collaring and • Mine-adapted carrier with articulated steering and
as support during rod handling four-wheel drive
• Low-emission, turbo-charged diesel engine
»»Positioning unit
• Tilt, rotation, pendulum arm and slide table »»General
• Accurate, smooth and proportional movements • Trolley-mounted operator panel
• Mine-adapted, sturdy components • FOPS-approved protective roof
• Electrical cable reel
• Working lights on tripods and protective roof
Simba M4 C-ITH
Specifications
ROTATION UNIT »»Electrical system
DHR 48H56 DHR 48H68
• Total installed power......................................................63 kW
• Main motors...................................................................55 kW
Length with fixed adapter 534 mm 534 mm • Voltage....................................................................400–690 V
Length with floating adapter 888 mm 888 mm • Frequency. ................................................................50–60 Hz
Torque, max. 3,900 Nm 5,100 Nm
• Starting method.................................... star/delta (400–690 V)
• Electronic overload protection for electric motors
Rotation speed 0–107 rpm 0–68 rpm
• Digital volt/amperage meter in electric cabinet
Adapter floating API 3’’ Reg Box API 3’’ Reg Box • Phase sequence indicator
Weight 164 kg 164 kg • Earth fault indicator
• Battery charger
• Transformer. ...................................................................8 kVA
FEED
• Halogen working lights, mounted on roof.............. 2x1,000 W
BMH 200-series BMH 235 BMH 236 • Cable reel
Specifications
DRILL STEEL
Rock drill Hole diameter, mm Drill pipes Thread pin/box
Optional equipment
»»Drilling system • Plug PC5
• Socket PC4
• Floating sub
• Socket PC5
• Switch gear
»»Positioning system • Electrical outlet, 16 A
• Rig alignment laser RAL 650 • Extra transformer, 15 kVA
• Turntable (±20º) between boom frame and drilling unit • Extra transformer, 10 kVA
• Additional stinger forward on feed, BSJ 8-115 • Metal halogen working lights, 2 x 400 W
(stroke length 1,150 mm) • Extra working lights 2 x 200 W, 24 V (on tripod)
• Additional stinger backward on feed, BSJ 8-200 • Extra working lights 2 x 500 W, 230 V (on tripod)
(stroke length 2,000 mm) • Electrics according to local standards
• Automatic lubrication for positioning system
• Central lubrication for positioning system »»Cabin
• Thread lubrication kit • FOPS-approved cabin:
• Rod handling system RHS 35 (up to 65 m) -- Fixed seat
-- CD-changer
»»Automation -- Boot washing kit
• Simba ABC Regular -- Air conditioning unit without heating
• Simba ABC Total • Stainless steel cabin
• Drill Plan Handling • Air conditioner with heating
• Full Drill Data Handling • Front window, 24 mm
• Rig Remote Access • Swingable operator seat
• Breakthrough Automatic Stop • FOPS-approved grizzly bar for front window
• Text Message System • Cabin lift/tilt system, 375 mm/15º
• Remote Cradle Control/Remote Feed Control • Reversing camera with monitor
• Mine Navigation • Joystick controlled spotlight
• Void Detection
»»Carrier
»»Air system • Fire suppression system, manual
• Fire suppression system, automatic (check-fire)
• On-board booster compressor • Fire suppression system, full automatic
• Particle filter UNIKAT
»»Hydraulic system • Brake lights
• L-carrier
• Air-oil cooler • Solid tyres
• Heater kit for diesel engine, electric motor and hydraulic • Deutz TCD 2013 L06 2V, 175 kW (238 hp)
oil tank
»»Miscellaneous
»»Electrical system
• Manual rig washing kit
• Soft start for 400–700 V • Manual lubrication kit
• Electrical cable on reel, H07RN-F • Hose and cable guide at water/cable reel
• Electrical cable on reel, Buflex • Link-one parts book
• Plug PC4 • Remote operating kit
• Special paint
• Additional panel
• Manual spotlight
Simba M4 C-ITH
Measurements
side view
2360 - 3060
www.atlascopco.com
M4 C-ITH
Illustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment are subjects to change without notice. Consult your Atlas Copco Customer Center for specific information.
M4 C-ITH
© Copyright 2008, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited.
2700
2900 3740 3200
Coverage area
A
1150
900
1200 (900)
Feed extension
o
750 1500 750 30 30 o
R
29
1500
70
(R
D)
(PH)
380o
4600
R 27
4915
90 (P
H)
1825
150
A
M4