Professional Documents
Culture Documents
1 Connect the AC adaptor. 2 Install the Google Home app. 3 Set up Wi-Fi with App. Talk to your Google Assistant. Touch-free Gesture Control Volume Operations
Install the Google Home app on a smartphone/iPhone. Follow the directions in the app to set up your speaker with Wi-Fi.
Set the speaker to the smartphone/iPhone's same Wi-Fi connection. *3 To fine-tune the volume
Say a voice command to set the volume
• Depending on your service, you may have to create an account in advance. Circle within this area. to your desired level.
Operating Instructions
Ok Google,
Play some music*1 Mic
• Lock buttons
1 2 3
• Is the Bluetooth LED flashing? • Did your speaker turn off? The Help Guide describes the features of the speaker and how to use in detail. You can
After establishing a Wi-Fi connection as described
on the front side, press and hold the (Bluetooth)/
Establish a Bluetooth pairing. Start playback. Prevent unintentional operations (gestures/
It means the firmware of your speaker has been
updated; it will stop flashing on its own.
Press the RESTART button. view the Help Guide on a smartphone or computer.
• Dimmer • Can you not operate your speaker or connect to • Do you want to turn off the MIC?
a Bluetooth device? Press the button.
The brightness of the clock display switches A Wi-Fi connection is required, so check whether
Gesture LED N-mark
Touch here when connecting by One-touch (NFC)
between High Middle Low Off the speaker is connected to one.
every time you press this button.
• Do you want to reset your speaker? Status LEDs (for Google Assistant)
Press and hold the button until the (microphone off) button
four status LEDs light in orange. Clock display/Volume display
DIMMER button http://rd1.sony.net/help/speaker/lf-s50g/h_zz/ (Bluetooth)/PAIRING button
Press
Built-in microphones
DIMMER/RESTART button
Gesture control sensor
• Switching the clock display (12 hour/24 hour) HOLD button
4-727-167-14(1) Bluetooth LED
©2017 Sony Corporation Press and hold the DIMMER button. DC IN connector
Printed in China