Professional Documents
Culture Documents
Version 2018-02-12
SikaRapid® C-100
SikaRapid® C-100
Superplasticizer for precast
Description SikaRapid® C-100 is a liquid strength accelerator for concrete and mortar. The
product provides early strength development and at the same time positively
impacts on final strenght. SikaRapid® C-100 is especially suitable for all applications
where fast, early strength development is important in the first few hours.
SikaRapid® C-100 does not contain chlorides or other substances that can cause
corrosion on steel. The product can therefore be used in reinforced concrete
structures.
Technical Data
Chemical base Nitrate-containing calcium silicate compounds
Colour White/reddish liquid
Density 1.39 ± 0.03 kg/dm³
pH-value 4±1
Chloride cont. <0.10 % by weight
Alkali cont., ekv Na2O <6.0 % by weight
Corrosive properties Not relevant when the instructions is followed
Dry cont. 55 ± 1.5 %
Viscosity Easy flow able liquid
Dosage 1.0-4.0 % by cement weight
Place of origin Sika Sverige AB
Domnarvsgatan 15
163 08 Spånga
SVERIGE
Packing size Can 25 kg, barrel 280 kg, IBC 1400 kg and tanker truck.
Shelf life 6 months from date of production for proper storage in unopened original packaging
at temperatures between + 5 ° C and + 30 ° C. Protect from direct sunlight and
frost. Avoid contact with acids and ferrous materials during storage.
Hazardous substances Se separate safety data sheet.
SikaRapid® C-100 is added to the measured water or added together with the
water into the concrete mixer.
SikaRapid® C-100 can also be added to the concrete truck at the workplace.
When added to the workplace, the car mixer should rotate at maximum for at
least 1 minute per m³ of concrete and at least 5 minutes to obtain a uniform
concrete mixture.
Check visually that the concrete mix is even before the concrete is casted.
The standard rules for good concrete work, both in terms of production and
casting, must be followed.
Laboratory trials shall be performed before casting in the workplace, especially
when using a new concrete recipe or in the production of new concrete
components.
Fresh concrete must be cured properly and curing applied as early as possible,
Construction
Clean all tools and application equipment with water immediately after use.
Hardened material can only be removed mechanically.
Sika Sverige AB
Domnarvsgatan 15
Box 8061 Tel. +46 8 621 89 00
SE-163 08 Spånga Fax +46 8 621 89 89
Sverige www.sika.se