Professional Documents
Culture Documents
Página 1 de 4
Cerrar SIS
Pantalla anterior
Producto: EXCAVATOR
Modelo: 320D EXCAVATOR CXY
Configuración: 320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine
Desarmado y Armado
3064 and 3066 Engines for Caterpillar Built Machines
Número de medio -SENR5553-10 Fecha de publicación -01/05/2012 Fecha de actualización -15/05/2012
i02795026
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
NOTICE
Note: The 3064 Engine has one cylinder head, while the 3066 Engine has two cylinder heads.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/07/2020
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 En... Página 2 de 4
Illustration 1 g00605078
1. Clean the surfaces of the cylinder head and the cylinder block that are in contact with each
other. Ensure that the surfaces are clean and dry. Install a new, dry cylinder head gasket (3)
on the cylinder block.
Note: Do not use any sealant or gasket adhesive on the cylinder head gasket .
Illustration 2 g00605044
Typical example
2. Install Tooling (A) , chains, and a suitable lifting device to the cylinder head.
3. Install the cylinder head in position on the cylinder block. The weight of the cylinder head
assembly for the 3066 Engine is approximately 32 kg (70 lb). The weight of the cylinder
head assembly for the 3064 Engine is approximately 45 kg (100 lb).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/07/2020
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 En... Página 3 de 4
Illustration 3 g00604993
5. Put clean engine oil on the threads of the cylinder head bolts. Install thirteen cylinder head
bolts (1) into cylinder head (2) ( 3066 Engine). Install seventeen cylinder head bolts (1) into
cylinder head (2) ( 3064 Engine).
Illustration 4 g00527556
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/07/2020
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 En... Página 4 de 4
Illustration 5 g00527527
6. Tighten the cylinder head bolts in the appropriate numerical sequence to torque of118 ± 5
N·m (87 ± 4 lb ft).
7. Repeat step 9 through step 6 for the other cylinder head ( 3066 Engine).
10. Tighten the cylinder head bolts again in the appropriate numerical sequence to a torque of
118 ± 5 N·m (87 ± 4 lb ft).
End By:
a. Install the water temperature regulator. Refer to Disassembly and Assembly, "Water
Temperature Regulator - Remove and Install".
b. Install the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Install".
c. Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft
and Pushrod - Install".
d. Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold -
Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc. Fri Jul 24 12:33:08 CDT 2020
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/07/2020