Professional Documents
Culture Documents
A S S E M B LY I N S T R U C T I O N S
WDC2430, WDC2436, WDC2442
(1) (2)
E
C
Place
panel B on a
flat, clean B C Following the
surface. Insert
same
camlock screws (6) into
procedure as in
holes as shown. Place a small B
illus. 1, combine
amount of wood glue into the 4
panels B and E with
remaining holes and push in the wood
your almost completed unit.
dowels. Insert camlocks in the larger holes on
This procedure should use the
both C panels. Follow the same procedure for
remaining camlocks screws and
attaching panel E to combined C and B panels.
wood dowels.
(3)
TIPS: Don't rush the assembly, get it right the first time. Test fit first before locking anything down. Don’t over tighten the cam locks and only use a
screw driver on them, since a cordless drill could have too much torque and break the cam.