Professional Documents
Culture Documents
LiNK audio-video-input
ZL-MFD1
Version 21.05.2010
Contents
1. Prior to installation
2. Installation
3. Specifications
4. Technical support
Information
Changes of the vehicle software can cause malfunctions of the interface. We offer free
software-updates for interfaces for one year after purchase. To receive a free update, the
interface must be sent in at own cost. Labor cost for and other expenses involved with the
software-updates will not be refunded.
Product features
Take down the serial number of the interface and store this manual for support
purposes: ____________________
Requirements
Vehicle Audi, VW, Skoda, Seat
Limitation
Factory-TV-tuner must be removed if installed
Retro fit rear view camera switching automatically into reversing gear only possible
for newer MFD1
3
page
Switch off ignition and disconnect the vehicle’s battery! The interface needs a
permanent 12V source. If according to factory rules disconnecting the battery
is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In
case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
If power source is not taken directly from the battery, the connection has to be
checked for being start-up proven and permanent.
4
page
Cinch-connections:
YELLOW = VIDEO-input (FBAS-signal)
RED = AUDIO-input right-hand side
BLACK = AUDIO-input left-hand side
if connecting a rear-view-camera:
VW MFD1 (newer version) Connect the green wire to reverse light (+12V of reverse
light signal) by using a relay
MFD1 Press AUDIO and select „AV“ (possibly switch the AV-source to “A+V” before)
Navi Plus Press RADIO/CD/TV and select „AV“ (possibly switch the AV-source to “A+V”
before)
5
page
3. Specifications
4. Technical Support
email support@caraudio-systems.de
Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.
6
page