Professional Documents
Culture Documents
MENU
PROGR
RM-883
TRINITRON ® COLOR TV
MICROFILM ®
ITEM MODEL Television System Stereo System Channel Coverage Color System
PAL, SECAM
UK I NICAM Stereo UHF : B21-B69 NTSC4.43, NTSC3.58
(VIDEO IN)
Power Consumption 89W 97W 97W 97W 97W 139W 97W 139W
Model Name
KV-25X5A KV-25X5B KV-25X5D KV-25X5E KV-25X5K KV-25X5L KV-25X5R KV-25X5U
Item
Pal Comb OFF OFF OFF OFF OFF OFF OFF OFF
Woofer Box OFF OFF OFF OFF OFF OFF OFF OFF
Scart 1 ON ON ON ON ON ON ON ON
Scart 2 ON ON ON ON ON ON ON ON
Front in (3) ON ON ON ON ON ON ON ON
Norm AUS OFF OFF OFF OFF OFF OFF OFF OFF
Norm SAT OFF OFF OFF OFF OFF OFF OFF OFF
Teletext ON ON ON ON ON ON ON ON
Language Preset Italian French German Spanish OIRT English OIRT English
The flexible mains lead is supplied connected to a B.S. 1363 fused plug
having a fuse of 5 AMP capacity. Should the fuse need to be replaced,
use a 5 AMP FUSE approved by ASTA to BS 1362, ie one that carries the
the
T mark.
ASA
FUSE
/ OFF
OFF
OK
+ +
MONO
P
_ _
s 2 L/G/S/I R/D/D/D
2
Video Input Button. Auto Tune 2 With the cursor pointing at the symbol on the
On/Off Switch. (selects input signals Button Volume Control Buttons. SELECT SELECT
MENU
reverts to settings made in “Adjusting the
Picture and Sound” sections of the manual
for films
for programmes broadcast live
Overview of Remote Control Buttons
4 Press the MENU button to remove the menu
PROGR
display from the TV screen.
6
Press to reveal all on-screen indications. 2 Press the button again to select your desired
To Change Screen Format Press again to cancel. mode.
Press to view programmes in 16:9
mode.
Press again to return to 4:3 mode.
PROGR
RM-883
7 8
1 Press the button on the remote control to 1 Press the button on the remote control to
/ display the three different modes on the TV display the three different modes on the TV
screen.
/
screen.
2 Press the button to highlight the user mode 2 Press the button to highlight the user mode
symbol as shown.
symbol as shown.
the TV screen.
MENU OFF
MENU
OFF
symbol on the TV screen then press the yellow Press the blue button to select the symbol on the SELECT
5
7
Press the blue button to select the item you wish IIIIIIIIIIIIIII - - - - - -
IIIIIIIIIIIIIII - - - - - -
to change (see below). IIIIIIIIIIIIIII - - - - - - 5 Press the blue button to select the item you wish to MONO STEREO
DSP ON OFF
IIIIIIIIIIIIIII - - - - - - change (see below).
RM-883 IIIIIIIIIIIIIII - - - - - - IIIIIIIIIIIIIIIIIIIIIII - - - - - -
RM-883
IIIIIIIIIIIIIIIII - - - - - - - - -
0 IIIIIIIIIIIIIII- -IIIIIIIIIIIIIII
9 10
OFF
/ 1 Press a number button on the remote control to
OK
OFF
select the channel which carries the teletext service
you wish to receive.
button. Weather 98
OFF
3 Input three digits for the page number using the
numbered buttons on the control.
PROGR
PROGR
• When watching TV, press the button to display To Freeze a Teletext Page
time remaining. Press on the control to freeze the page.
Press again to cancel the freeze.
• To return to normal operation from standby mode,
press the / button. Revealing concealed information (eg: answers
to a quiz).
Press to reveal information.
Press again to conceal the information.
11 12
SELECT
OFF
OFF
OK
OFF OK
OFF
the TV screen, then press the yellow button. TV screen then press the yellow button.
OFF
OFF
4 Press the blue button to select the tuning bar scale PROGR 01
4 With the cursor pointing at PROGR on the TV
PROGR - +
then press the yellow or red button once to start the CH 05 IIIIIIIIIIIIIII - - - - - - - -
PROGR screen as shown, press PROGR + or - button until 01
PROGR
channel search. (Yellow to search up the scale or
F on
the channel you wish to rearrange appears on red to search down). When a channel is found it COO
screen, then press the blue button once. appears on the TV screen.
9
13 14
Front of TV
1 With the channel you wish to fine-tune on the SELECT
Select and View the Input Signal
/ screen, press the MENU button on the remote SELECT
OK
1 Connect your equipment to the designated TV socket.
screen.
2 Press the button repeatedly on your remote control until the
correct input symbol appears on the TV screen.
+ +
MONO
P
_ _
s 2 L/G/S/I R/D/D/D
2
select the symbol on the TV screen then press 1 • Audio/video input signal through the Euro AV
the yellow button. connector F
OFF
A B C D
• RGB input signal through the Euro AV 8mm/Hi8
connector F camcorder
to adjust the tuning. s • S video input signal through the socket B . s 2 L/G/S/I R/D/D/D
2
F on
COO
3 Switch on the connected equipment.
PROGR
4 To return to normal TV picture, press the button on the remote
control.
4 Press the blue button to select the symbol on the PROGR 01 S-VHS/Hi8
TV screen then press the yellow button to store. CH 05 IIIIIIIIIIIIIII - - - - - - - - camcorder
Note: To avoid picture distortion, do not connect equipment to the
B , C or E connectors at the same time.
10
F on
COO
RM-883 Rear of TV
Additional Information
5 Press the MENU button to remove the menu from
the TV screen. Connecting a VCR
We recommend you tune in the VCR signal to TV programme number `0'
using the `Manually Tuning in the TV' section of this instruction manual. E F G
Connecting Headphones
Plug in your headphones to the socket A on the front of the TV set.
Connecting Decoders
2/ s
1/
R/D/D/D
Playstation
VCR Hi-Fi
15 17
Troubleshooting Specifications
Here are some simple solutions to problems which may affect the picture and sound.
TV system
I
Problem Solution Colour system
No picture (screen is dark), • Plug the TV in. PAL
no sound • Press the button on the front of TV. NTSC 3.58, 4.43 (only Video In)
• If the indicator is on press / button Channel coverage
or a programme number button on the UHF: B21-B69
remote control. Picture tube
• Check the aerial connection. KV-25X5U:
• Check that the selected video source is Super Trinitron
on. Approx. 63 cm (25 inches) (Approx. 59 cm picture measured diagonally),
• Turn the TV off for 3 or 4 seconds and 100° deflection
then turn it on again using the button KV-29X5U:
on the front of the TV. Super Trinitron
Approx. 72 cm (29 inches) (Approx. 68 cm picture measured diagonally),
Poor or no picture (screen is dark), • Using the MENU system, select the 100° deflection
but good sound. Picture Adjustment display.
Adjust the brightness, picture and Inputs
colour balance levels. • Rear Terminals
• From the Picture Adjustment display 1/ 21-pin Euro connector (CENELEC standard) including audio/video
select to return to the factory input, RGB input, TV audio/video output
settings.
2/ s 21-pin Euro connector (CENELEC standard) including audio/video
Poor picture quality when watching • Press the button repeatedly on the
input, S-video input, Monitor audio/video output
a RGB video source. remote control until the RGB symbol
is displayed on the screen. • Front Terminals
2 video input - phono jack
Good picture, no sound • Press the +/– button on the remote
11
Remote control does not function • Replace the batteries. Dimensions (wxhxd)
KV-25X5U: Approx. 593 x 502 x 506 mm
KV-29X5U: Approx. 676 x 557 x 525 mm
• If you continue to have these problems, have your TV serviced by qualified
Weight
personnel.
KV-25X5U: Approx. 33.2 kg
• NEVER open the casing yourself.
KV-29X5U: Approx. 43.5 kg
Accessories supplied
RM-883 Remote Control (1)
IEC designated batteries (2)
Other features
TELETEXT, Fastext
18 19
English
Sony Corporation 98BP7173-1
Sony UK Printed in U.K.
9-974-964-01 Service Promotions Dept. © 1998.2