Professional Documents
Culture Documents
In this method we are going to be using yahoo messenger to get installs, this
is good as they have chat rooms and are a very big company so thousands of
people use there service to chat everyday, with these chat rooms you get
people who chat with you just for signing in so it makes it much easier to get
installs if there coming to you. If this method doesn’t work on someone then
that doesn’t matter, there are plenty more fish in the sea to get installs on.
First Step
We are going to sign up for a yahoo email address which would be appealing
to people in chat rooms A.K.A we are going to have a girly ID and attract
guys as this has been the easiest method to get 100 installs an hour but feel
free to use your own type of ID but I wouldn’t recommend it. To register go
to http://mail.yahoo.com and select ‘Create new account’ as shown below.
You will then get a sign up screen to fill in all your details, this is pretty
much self explanatory just fill in all the details needed which can be fake or
real but should likely be fake as there is no reason to put real details down.
An example of this is show below.
Make the ID A.K.A the email address appear as if you’re a girl so choose
something along the lines of what I use which is ‘LittleMissSexy’ or
something more common like ‘Megan_1991’ as this gets the point across that
you’re a girl but also says your age which would attract more attention but
make sure the ID isn’t to obvious like ‘huge****’ because they might think
you’re a bot like one or two of them on yahoo also. Once this is done click
‘create my account’, this is now the login for your yahoo messenger to get
installs.
Second Step
You now need to download yahoo messenger which can be downloaded from
this link: http://messenger.yahoo.com, if you decide not to use this link or it
doesn’t work then you do a simple Google search for it but make sure it is
the US version because sometimes If you download other versions such as
the UK one you don’t get the chat room feature installed. To get passed this
either download it of a .com link or delete your old yahoo messenger in
control panel first then ‘Google’ yahoo messenger and make sure you click a
US .com link and not your home country link unless it’s the US of course.
Here’s what it should look like
The third step is to prepare your server you are spreading and getting
installs for, because if we were to send a raw server then people wouldn’t
download it, not that I haven’t seen people do it, you can actually get quite a
few installs an hour without even crypting, disguising, changing name etc but
if you forget all 3 then you will get next to no installs so you need to prepare
your server. The first step of preparing your server is to crypt your server
so that it shows as having no virus which many people do for free on
www.hackforums.net under service sections but this depends on your server
because some servers can be ruined when being crypted so that is your
responsibility to make sure it can be used after crypting, keep searching
there is usually a way to crypt most things which could possibly lead to costs.
Just test your server after crypting to make sure it works. When you have a
working crypted server or whatever you’re spreading then you will have to
change the icon of the server to make it look like an image file so it is more
believable and more likely to get installs. There are many ways to change the
icon of a server which can be found by searching hackforums.net. Here is a
very trusted method a lot of people use including me when spreading on
yahoo. You will need to download ‘resource hacker’ from here:
http://delphi.icm.edu.pl/ftp/tools/ResHack.zip but if this link cannot be
accessed then Google “resource hacker” and click the first link, when the
first link has been clicked then scroll down the resource hacker page and
click one of the images with a hammer leading to download resource hacker.
Once you have download Resource Hacker you will need to get a JPG icon
looking like this
This can be found in the folder ‘Tools’ > ‘JPG’ I sent along inside the tools
folder. Now open Resource Hacker and open your server by clicking file then
open or CTRL+O
and then selecting your server. Now when you have opened up your server
click the + on the left next to the sub-heading saying ‘Icon’, when this
expands you then right click on the new field that has just appeared and
then click ‘Replace Resource’.
A new box will appear click on ‘Open file with new icon’ in the new box and
select the JPG icon which came with the download of this E-Book. After this
just close the box and file>save in the main resource hacker menu and close
the whole of Resource hacker. Now you have just changed the icon of your
server into a believable image and the hard part is now done and it only gets
easier from here and soon you will have thousands off installs.
The next part is just simply changing the name of the file to a more
believable one and preparing your server is done. After you are done with
Resource hacker you will have two files, one is ‘server.exe’ and the other is
‘server_original.exe’ (obviously ‘server’ is replaced with whatever you named
your server). We only need the ‘server.exe’ as it is the one which is updated
with the new icon. We need to re-name ‘server.exe’ to something more
believable like ‘IMG0947.scr’, the change to ‘IMG0947’ is more believable as
an image or something along the lines of ‘Janet 19th Nov 2009.scr’ also notice
the change in the type of file instead of ‘.exe’ I change it to “.scr” which will
need to be done. When the file extension is changed to ‘.scr’ it runs the same
as a ‘.exe’ but if it were a ‘.jpg’ your server wouldn’t run. When ‘.scr’ is there
it shows as a screensaver which makes a more believable image and more
likely for people to open as your pretending to be a girl. Sometimes you can’t
see the file extensions such as ‘.exe’, ‘.scr’ or ‘.jpg’ because they are hidden
so can’t be changed, to alter this on windows vista click on the “organise” tab
then click ‘folder and search options’ when it appears. A new box should open
up click the view tab at the top of the new box and then scroll down till you
sea the ‘hide extension for known file types’ option, make sure it is
unchecked so that you can see the file extensions which you need to change
to ‘.scr’ then click ‘ok’ at the bottom of the box and you can now follow the
steps above to get the desired file extension. To do this in windows xp or
other operating systems is basically the same method but some buttons to
change the folder options may be in different places, so to get the folder
options in different operating systems just do a simple Google Search.
Fourth Step
Now that your server is completely disguised as an image and is virus ‘free’,
now we can get on with the spreading. Open up yahoo messenger and type in
the details to the account you registered above.
Now that you are signed in with the girly ID you will now need to enter chat
rooms by clicking file>yahoo chat>join a room. Now it is your choice to pick
which room you would want to join but aim yourself towards rooms with
horny guys for example:
Four isn’t that much but I just joined when it was 4am there just for the E-
Book quickly
To do this I send them this message below typed up really quickly then paste
my server and add on at the end “how is it” (as in how’s the file I just sent?)
but only send “how is it” If they accept it, I put how is it or “did you like it”
to make sure they open the file.
Before After
If they ask any questions then answer them reasonably and repeat what you
typed before for example
Eventually after doing this method many times you can apply your own
methods and you will know what works best for you and what doesn’t. You will
need to repeat this method to anyone who IM’s you. With this method I can
usually get an acceptance rate of 5:3 so 5 out of every 8 people I talk to
installs my server. If they ever decline your download then I usually just
click “ignore them” as they are likely a waste of time and there are too many
people out there who are willing to install just to look at my ‘image’.
And that is how I spread my files in which I can get around 300 Installs
within 2 hours (this is obviously after a lot of experience) which you can
reach also after a couple of days of learning how to answer questions, know
what to say to weird questions and know some of your own chat lines through
your experience with horny guys.
This is the end of the Yahoo Spreading Guide! Go on and spread as much as
you can but here is a final word from me and some tips:
• The Ignore button is a great tool, use it every time someone hasn’t
downloaded your file within 1 minute as you have many other people
that would want to download it.
• If someone asks you what a ‘.scr’ file is then say it is a ‘screen image’,
I also like to say it means that it will show a slideshow of me but
always say that it will open as a regular file.
• If they want to share the photo in photo share, just simply say you
have an old yahoo and you can only send pictures.
• If you are getting no IM’s then go to the Main chat room and type in
‘anyone wanna chat’ and you should get a healthy amount of IM’s if you
keep repeating this when empty on IM’s, also switching rooms is good
if no IM’s are being received.
• Make smart spreading decisions by finding out by simple Google
searches the peak time of when people are on the internet and what
time it is in other countries, by doing this you can then decide which
room would be best to join for installs.
• Prepare what you are going to type up really fast and try to send your
‘server’ as much as you can to them, so that you don’t go into deep
discussion with them and stay on topic with the download.
• Never add them as contacts otherwise they will keep pestering you
every time you come on.
This method as you can tell consists of uploading torrents which include your
server you are trying to spread and getting other people to download them
and run them. The reason this works so well is that people believe they are
downloading a virus free program for free that would usually cost quite a lot
of money in the shops. What actually happens is that they do get the
programs for free but they also open up your server without knowing
depending on what type of server you have and if it is crypted/virus free.
Step one
The first thing you will want to do is crypt your server/bot. Crypting is the
process of scrambling data in your server so that it doesn’t show up as a
virus to anti-virus’s. To do this you can easily buy a crypter from websites
such as Hackforums.net or get someone to do it for free at HackForums.net
under the service section of the website. You will need a crypted server for
this to work other wise it breaks the method greatly. Now make sure your
server is crypted by going to http://scanner.novirusthanks.org/ and
selecting then submitting your server, make sure ‘do not distribute the
sample’ is checked and wait for your results. If everything is fine you should
get 0/? CLEAN like shown below.
Step 2
You have just crypted your server, what you will need to do now is to get
programs to bind your server to, to make it something people want and want
to open. Binding is when two files join together and are both find at the
same time. We will run both the server and the downloaded program at the
same time but the server will remain hidden when opening so your victim is
infected with it without knowing specially if your server is crypted.
To get the programs you can do various things. You will need to find
something people are really wanting, good examples of this include
Photoshop, Adobe CS?, and keygens. These are good examples because they
are in high demand and will be opened by many. The keygens are especially
good because they are not big files so that lowers the risk of someone
cancelling the download because of it taking too long to download. Good
Places to find the downloads are Warez or the pirate bay. I would personally
download from warez as you check whether or not they good via the replies.
The pirate bay is good also as you can check which program is being
downloaded most which means more people have checked it thoroughly and
know it doesn’t have viruses.
First I will show you which downloads are good from the pirate bay. To do
this you need to visit http://thepiratebay.org/top/301 this shows the Top
100 download windows applications on the pirate bay. If you can’t click the
link then search ‘pirate bay’ on Google and click the first link then when on
the home page click on ‘Top 100’ and on the page after that click on
‘Windows’ under ‘applications’. From there you decide programs are best to
download. Try and make sure they are small, in demand and aren’t stupid, For
example you don’t want to bind it to an anti-virus or keylogger. Here is a
selection I would pick from below.
The download these you will need a torrent downloader, uTorrent is the best
one to use in my opinion and only take a couple of seconds to install. Go to
http://www.utorrent.com/ and click the big green download button and ‘run’
the program and then follow the installation instructions. If the link isn’t
working Googling ‘uTorrent’ and clicking the first link should bring you to the
home page and then follow the instruction above when there. When that is
done just click the button (looking like the one below) under the download
name.
You will be prompted with a ‘run’ ‘save’ screen, just run the torrent in
uTorrent and wait for it to download. To locate the download just right click
the download and click ‘Open Containing folder’ like below.
Now I will show you how to repeat the process in warez. To go to warez
simple Google ‘warez bb’ and click the first link that appears or click here
http://www.warez-bb.org/ , then when on the page click on the ‘apps’ section
to view all the programs to download and bind. Before you can look at the
apps you will need to register by clicking ‘register’ near the top of the home
page. Once registered and in the ‘Apps’ section there will appear to be man
programs available, the ones with many replies are what you are looking for
as they have thanks or good replies from people and hasn’t been deleted for
bad reasons. To download these ones just click on the link and follow the
download instructions within the link and locate where you have saved it.
Make sure what you download is an ‘.exe’ program. Here is what I would pick
out of the selection below.
These are good because they are ‘.exe’’s and have many replies which are
good.
Step 3
In step 3 we will need to join both the file you downloaded off the websites
(pirate bay or warez) and your server, so that when the victim runs the
overall file they think they have installed a virus free program successfully
without knowing they also ran your server.
You will need to use a binder which can be found at hackforums.net through
various searches for free or you can use a tool already integrated into
windows called ‘iExpress’, I will show you how to bind using iExpress.
To open up iExpress click on ‘start’ in the bottom left corner of your screen.
Then click ‘search’ or click in the search box.
Type and search for ‘Run’, when ‘Run’ appears click on it.
Type in run ‘iExpress’ and hit enter
This will bring up the iExpress. To use iExpress to bind files use the
pictured tutorial below.
Copy everything I do below using with your own files and change the settings
to mine, a red box means you click there.
• Click Next
• Then click next
• Then press the spacebar inside the white box and click next
• Now select your server as the ‘install program’ and your Program you
downloaded as your ‘Post install program’ then click next
• After that select ‘Hidden’ so that your victim doesn’t know they are
infected.
• Click next
• And finally click ‘finish’
Step 4
Let’s say ‘keygen.exe’ is the file I downloaded and ‘binded file.exe’ is the two
programs binded together.
As you can see ‘binded file.exe’ doesn’t look as good and believable as
‘keygen.exe’, so we are going to have to make ‘binded file.exe’ look like
‘keygen.exe’ so people download and install it.
To do this we will open up resource hacker and click file->open and open up
the ‘keygen.exe’ (your downloaded file), then find ‘version info’ on the left
panel and if it is there then click the ‘+’ next to it and the ‘+’ that comes out
of that one. Then select/click on ‘1053’ or whatever you have and text will
show on the right, then right click anywhere inside that text and then click
‘select all’ when it appears and right click again, then select ‘copy’ but if you
get no ‘version info’ appearing just leave it for now.
Now open up you binded file in resource hacker. Repeat the same procedure
as before and get to ’1053’ and instead of copying, just paste it. So now you
have pasted all the version info from the program file to the binded file. If
you never got version info to appear before then (right click 1053 ->delete
resource-> yes)
Now that you have pasted the new info, click on compile script which is seen
above. Then click ‘action’ then ‘repace icon’. A new box should appear, click
‘open file with new icon’ then find the file you downloaded (the one from
warez or pirate bay) and open it in resource hacker. Once opened you should
return to the previous box, in which you will click ‘replace’ if any errors come
up just accept them because the process still works even with errors. After
this you should be back to the resource hacker main screen, in which you
should file -> save it. Make sure when saving you name it the same as the
original download. When you have the final file with the different name, the
icon should be the same as the download. If the icon hasn’t changed just
refresh the page a couple of times and it should.
Now you should have a binded file which runs your server and looks like it is
running a program set-up and looks believable also because it has the same
icon and name of the downloaded file.
Step 5
In step 5 we will be using uTorrent to spread the final file. Make sure your
final binded program is in the same layout as you downloaded it so just
replace the new binded file with the one in the folder you downloaded
containing the program. This is because we will be uploading the folder and it
looks more presentable in the way you got it making it more believable.
To spread using uTorrent, open up uTorrent then click on file-> new torrent.
A new screen will show, click on ‘add file’ and then find the file you binded
and renamed etc. and open it then under trackers put
http://open.tracker.thepiratebay.org/announce
Tick ‘start seeding’ and then click ‘create and save as…’ like below
When you save it make sure there is no ‘.exe’ in the name
For example:
When you save you create a ‘torrent’ file which is what you will be uploading,
the torrent is then used in other peoples ‘utorrents’ to download your binded
file, so don’t move your new binded file or anything in or around the file.
Locate your new torrent file.
To get many downloads you need to go to these websites and upload your
torrent to them:
http://thepiratebay.org/upload
http://www.mininova.org/upload
http://www.btjunkie.org/?do=upload
http://torrentbox.com/torrents-add.php
http://www.torrentreactor.to/torrents/add
http://www.seedpeer.com/upload.html
http://www.bitenova.nl/upload
http://www.torrentportal.com/torrents-upload.php
http://www.fulldls.com/upload-torrent.php
http://torrents.sumotorrent.com/upload.php
http://www.torrentdownloads.net/upload/
http://www.torrentmatrix.com/torrents-upload.php
http://fenopy.com/submit/index.html
Once they are uploaded leave your uTorrent on as long as you can because
only you have the file at the beginning and you will need to seed it.
http://www.seedpeer.com/upload.html
http://www.btjunkie.org/?do=upload
http://www.bitenova.nl/upload
http://www.fulldls.com/upload-torrent.php
http://torrents.sumotorrent.com/upload.php
Wait t’ill you have 5 seeds and 20 peers then upload to these
http://www.torrentreactor.to/torrents/add
http://www.torrentportal.com/torrents-upload.php
Wait t’ill you have 10 seeds and 30 peers then upload to these
http://www.torrentdownloads.net/upload/
http://www.torrentmatrix.com/torrents-upload.php
http://torrentbox.com/torrents-add.php
http://www.mininova.org/upload
http://thepiratebay.org/upload
To check the seeds and peers you will need to look at the torrents stats on
uTorrent.
This is now the end of the Torrent spreading method which can be repeated
with many different programs to maximise installs also if you can’t upload
anymore because of bans use a proxy website or change your ip address so
you can upload again but they do no accept your torrent just edit the files a
little bit and make a torrent out of it and they will be non the wiser.
Step 1
First of all the Omegle spreader program has to run by itself and has to be
on top of your screen so you can’t do anything else while it is so that’s why
it’s best to do it when you’re asleep. You can find the Omegle spreader inside
the ‘Tools” folder that should have come along with the download of this E-
book. Omegle Spreader is in the ‘Omegle spreader’ folder in the ‘Tools’
folder.
Now you need to open up the Omegle spreader and place the settings you
want, you don’t need to apply that much actually, all you need to do is put
your download link and some usual chit chat to make them believe your real.
Step 2
To use the Omegle spreader properly you will need to put a static (non
changing) direct(straight to the ‘.exe’ no waiting) link there to be really
effective. Before you do this you will want to change the name of your
server to ‘slideshow’, also you can change the icon of the server to make it
more believable and crypt it which the tutorials for can be found above
which will increase the install rate. Once you have disguised the file well
enough you can create your direct link to your server. There are many ways
to do this For Example going on hackforums.net and searching for direct link
websites. I personally prefer to use www.uppit.com. To use uppit effectively
you will need to click browse and select your server, then when done just
click upload and wait.
After waiting for it to upload go to the URL where it says you can download
your server.
Go here
Now that you have got your pictures ready, you will need to press ‘start’ as
you are ready to spread you server efficiently over night. When you press
start you will have to leave your computer completely as you can not use any
of it while the Omegle spreader is doing it’s thing. The spreader will then
start moving your mouse automatically and will chat to people for you
automatically.
This is now the end of the ‘Omegle spread tutorial’ which is much easier to
do than the other methods and may get not many installs but is very
efficient for when you are asleep.
Hopefully with this method you can be as successful at spreading as me and
you can make money of it by starting a spreading service, selling bots or use
your server for PTC but under no circumstances will you re-distribute, re-
sell or leach this guide innless you have paid for Resell rights of me (Tyler
Durden). Also you can always or contact me on hackforums.net by PMing me
and I will respond ASAP.
In this method we will be spreading via Chatrooms on websites. With this
method you can reach about 30 installs an hours which I have done myself.
This method is good as you can get anyone to follow you into your own chat
and basically have an unlimited amount of people to infect.
In this method you will be going on chat websites and will be inviting someone
to chat with you on ‘MSN Messenger’ in which you will be social engineering
them to install your server. You will get them to believe you’re a girl and
send them your server. This method is very similar to the Yahoo messenger
spreading method except you are reaching many more people and can target
who you want to infect better. You will however have to refer to some
tutorials above in the other methods as it is a waste of E-book pages to
repeat and you paid for your pages to be detailed.
Step 1
The first step in this method, just like the other steps is to crypt your
server (I will move to next part because if you want to crypt your server or
know what it means just read the tutorials above) which you should now have
done. When you have done this you will need to change the name of your
server and the icon which is shown how to do in the ‘Yahoo messenger
spreading method’ tutorial above. Now that your server is prepared to
spread, you will need a email address so you can chat to your victims all at
once and send your server effectively.
Or
Go to www.Google.com and search for ‘download msn messenger’ then click
the first link.
When you are on the download page just click ‘Download Now’ and follow the
screen instructions to install MSN Messenger.
Now you have to set up the new e-mail address so you to use on your
chatroom victims.
Once accepted your email should be ready, now you need to find your target.
Step 2
Now you can simply find your targets by going into any chat room, just say
your information so that it’s associated with the group your targeting, For
Example if I’m in a teen chat room I will say that I am a teen. Simple. You
can just Google ‘chatrooms’ and any of them should be fine but try and go
for a younger audience who are more likely to install your server.
Now open up MSN Messenger and sign in using your sign up details you just
made, edit your name to something good like below.
Also change your Personal Message to your ‘direct download link’, to get your
direct download .exe link just look at page 36 of this e-book and onwards to
get a ‘direct download link’. So by now you should have got a download link
but it has an ‘.exe’ or ‘.scr’ on the end of it, so we will just have to cover up
the link using www.tinyurl.com (Google it if the link doesn’t work). Just paste
the link into www.tinyurl.com and shorten the link.
Step 3
Now you are ready to spread your e-mail address, so just enter any chat
room and type in ‘anyone wanna chat? My email is
***************@hotmail.com’ (your email address you made). Try and
associate your username in the chatroom with your email address so that it
is believed that you are a girl, like below.
Now you should get loads of people adding you, like below
Add them all and use the chatting technique used in the ‘Yahoo spreading
methods’ on page 14 in this e-book to spread your link to your server, so that
you are copy and pasting your direct download link to everyone which makes
them believe they are looking at a picture. I know this guide is using already
explained techniques but is still a good alternative especially for reaching
specific groups yahoo messenger doesn’t have.
All together that is over 2000+ installs in 5 hours everyday easy which can
lead to you getting your money back if sell each bot install for $0.10, this
means you would get $200 for 5 hours of spreading. I have over 20 torrents
still getting installs everyday so my chatroom talk is very limited as I have
enough installs from torrents so I don’t need to do more than 1 hour
everyday to reach 2000+ installs, which you can reach also.
This E-book has clearly shown that anyone can reach 2000+ for free easily
even if your not good at one of the methods. I have also included a word
document including some links to some other methods of spreading which to
me weren’t going to generate that many installs put may come of some help
to you, it can be found in the ‘Tools’ folder in the ‘.Word’ sub folder.
If you have any questions, suggestions or anything I need to fix in the E-
Book (for example grammar) then just PM me (Tyler Durden) on
HackForums.net