Professional Documents
Culture Documents
Technical Overview and Specification Summary Ps 00232 Data PDF
Technical Overview and Specification Summary Ps 00232 Data PDF
PS-00232, Rev T
June 2016
Technology Leadership
Micro Motion is committed to technology innovations that deliver the highest-performing solutions for your
complex measurement challenges.
Unparalleled value
Benefit from expert field and technical application service and support made possible from more than one
million meters installed worldwide and over 30 years of flow and density measurement experience.
Technical Overview and Specification Summary June 2016
F-Series R-Series
High performance compact drainable General purpose flow-only Coriolis meter
Coriolis meter Simple to install and easy to use Coriolis
Best flow and density measurement in a flow measurement
compact, drainable flow meter Broadest range of application coverage
Broadest range of application coverage Superior reliability
Superior reliability and safety
H-Series LF-Series
Hygienic compact drainable Coriolis meter Extreme low-flow Coriolis meter
Best flow and density measurement in a Highest precision miniaturized flow
compact hygienic flow meter meter
Comprehensive hygienic application Scalable platform for the most
coverage demanding low-flow applications
Superior reliability Superior reliability
CNG-Series
Compressed Natural Gas (CNG) Coriolis
meter
Specifically designed for both light and
heavy duty vehicle dispensers
Custody transfer approved
Compact design with no moving parts,
special mounting, or flow conditioning
required
Contents
Micro Motion Coriolis flow and density meters.............. 2 Accuracy and repeatability on gases ........................... 14
Flow and density meter specifications ...........................3 Liquid flow rates .......................................................... 15
Micro Motion transmitters and controllers ....................5 Gas flow rates ............................................................. 17
Transmitter and controller specifications ......................6 Liquid density accuracy and repeatability ................... 19
Micro Motion density meters .........................................9 Gas density/specific gravity accuracy and repeatability 19
Density meter specifications .......................................10 Temperature accuracy ................................................ 20
Performance specifications .........................................14 Viscosity accuracy and repeatability ............................ 20
Reference operating conditions ..................................14 Temperature rating .................................................... 20
Accuracy and repeatability on liquids and slurries ........14 Process pressure ratings ............................................. 21
2 www.micromotion.com
June 2016 Technical Overview and Specification
Application type
ELITE® CNG-Series F-Series H-Series LF-Series R-Series T-Series
Continuous control ● ● ● ● ● ● ●
Batching / loading / blending ● ● ● ● ● ● ●
Custody transfer ● ● ◐ ◐
● Supported on all models ◐ Supported on some models
Measurement accuracy
ELITE® CNG-Series F-Series H-Series LF-Series R-Series T-Series
Liquid Mass Flow ±0.05% ±0.10% ±0.10% ±0.50% ±0.40% ±0.15%
3 3 3 3 3
±0.0002 g/cm ±0.0005 g/cm ±0.0005 g/cm ±0.005 g/cm ±0.003 g/cm ±0.002 g/cm3
Liquid Density
(±0.2 kg/m3) (±0.5 kg/m3) (±0.5 kg/m3) (±5.0 kg/m3) (±3.0 kg/m3) (±2.0 kg/m3)
Gas Mass Flow ±0.25%*/±0.35% ±0.50% ±0.50% ±0.50% ±0.50% ±0.75% ±0.50%
Capabilities
ELITE® CNG-Series F-Series H-Series LF-Series R-Series T-Series
Self-draining ◐ ● ● ● ● ●
Sanitary / hygienic ◐ ● ●
Two-phase flow /
Entrained gas ● ◐ ◐
Smart Meter Verification ● ● ●
High temperature ◐ ◐
High pressure ◐ ● ◐ ◐
Cryogenic ◐ ◐
● Supported on all models ◐ Supported on some models
Wetted materials
ELITE® CNG-Series F-Series H-Series LF-Series R-Series T-Series
300-series stainless steel ● ● ● ● ● ●
Super Duplex ◐
Nickel Alloy C22 ● ●
Titanium ●
● Supported on all models ◐ Supported on some models
www.micromotion.com 3
Technical Overview and Specification Summary June 2016
4 www.micromotion.com
June 2016 Technical Overview and Specification
1700/2700 2400S
Versatile field-mount transmitter Compact integral transmitter
Integral and remote mount options Simple I/O options
Wide variety of I/O and application Offers powerful diagnostics like
capabilities to fit your needs Smart Meter Verification in a
Available with a full stainless steel condensed form factor
housing for harsh environments
3300 3350
Rack/panel mount discrete controller Field mount discrete controller
3500 3700
Rack/panel mount transmitter with Field mount transmitter with discrete
discrete controller controller
5700
Advanced field-mount transmitter
Integral and remote mount options
Wide variety of I/O and application
capabilities to fit your needs
Large graphical display
Real time data logging and storage
www.micromotion.com 5
Technical Overview and Specification Summary June 2016
Output variables
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
Mass / volume flow ● ● ● ● ● ● ● ● ● ● ● ●
Net product content / flow (1)
● ● ● ● ● ●
Temperature ● ● ● ● ● ● ● ● ●
Density ● ● ● ● ● ● ● ● ●
Concentration ● ● ● ● ● ● ●
Viscosity/referred viscosity ●
(1) Flow rate of product based on concentration. For example, in a dissolved sugar solution, the measurement is the flow rate of the sugar alone, and in a net oil
application the measurement is water alone or oil alone.
Local display
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
2-line ● ● ● ●
Multi-line ● ● ● ● ●
Graphical ●
● Supported on all models ◐ Supported on some models
Power
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
AC ● ● ● ● ● ● ● ● ●
DC ● ● ● ● ● ● ● ● ● ● ● ●
Loop powered (2-wire) ●
● Supported on all models ◐ Supported on some models
6 www.micromotion.com
June 2016 Technical Overview and Specification
Outputs
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
4–20 mA ● ● ● ● ● ● ● ● ● ● ● ● ●
10 kHz pulse ● ● ● ● ● ● ● ● ● ● ●
Discrete ● ● ● ● ● ● ● ● ● ● ● ●
®
HART / WirelessHART ®
● ● ● ● ● ● ● ● ● ● ●
Modbus ®
● ● ● ● ● ● ● ● ● ● ●
EtherNet/IP (1)
● ● ● ● ● ● ● ● ● ● ●
FOUNDATION™ fieldbus ● ●
PROFIBUS-PA ●
PROFIBUS-DP ● ●
PROFINET (1)
●
DeviceNet ™
●
(1) With the use of the Micro Motion Ethernet/IP module or transmitter.
Inputs
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
10 kHz pulse ● ● ●
Discrete ● ● ● ● ● ● ● ● ●
4–20 mA ● ●
HART ● ● ●
2-wire density sensor ●
3-wire density sensor ●
4-wire Coriolis sensor ● ● ● ● ● ● ●
9-wire Coriolis sensor ● ● ● ● ● ● ●
● Supported on all models ◐ Supported on some models
www.micromotion.com 7
Technical Overview and Specification Summary June 2016
Mounting
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
Integral – Field ● ● ● ● ● ●
Remote – Field ● ● ● ● ● ●
Remote – Control room ● ● ● ● ●
Remote – Rack / panel mount ● ●
● Supported on all models ◐ Supported on some models
Hazardous approvals
Legacy
7950
1500 1700 2200S 2400S 2500 2700 FMT 3300 3350 3500 3700 5700 7951
C1D1 ● ● ● ●
C1D2 ● ● ● ● ● ● ● ●
Zone 1 ● ● ● ● ● ●
Zone 2 ● ● ● ● ● ● ●
● Supported on all models ◐ Supported on some models
8 www.micromotion.com
June 2016 Technical Overview and Specification
FDM FVM
Direct insertion density meter High performance multi-variable
Rugged, accurate density and viscosity meter
concentration measurement Rugged, accurate multi-variable
Superior multi-variable I/O, meter measurement
health, and application capabilities Superior multi-variable I/O, meter
Installation flexibility and health, and application capabilities
compatibility Installation flexibility and
Replaces the 7826/7828 compatibility
Replaces the 7827/7829
SGM HFVM
Gas specific gravity and gas energy High performance multi-variable
meter viscosity meter
Precision gas specific gravity World-wide marine-approved
measurement design for aggressive environments
Superior multi-variable I/O, meter Durable Diamond-Like Carbon
health, and application capabilities (DLC) coating that is resistant to
installation flexibility and friction, chemicals, impact, and
compatibility mechanical damage
Replaces the 3098 Replaces the 7829
www.micromotion.com 9
Technical Overview and Specification Summary June 2016
Application type
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
Continuous control ● ● ● ● ● ● ● ● ●
Batching / loading /
blending ● ● ● ● ● ● ● ● ●
Custody transfer ● ● ● ● ●
High consistency slurry ● ●
Viscosity control ● ● ●
Combustion control ● ● ● ● ● ●
● Supported on all models ◐ Supported on some models
Measurement accuracy
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
3 3 3 3 3
±0.1 kg/m ±1.0 kg/m ±1.0 kg/m ±1.0 kg/m ±0.0001 g/ ±0.001 g/cm
Liquid & slurry density(1) (±0.0001 g/ (±0.001 g/ (±0.001 g/ (±0.001 g/ cm3 (±1.0 kg/m3)
3 3 3 3
cm ) cm ) cm ) cm ) (±0.1 kg/m3)
(1) Accuracy specifications shown are best possible. Specific models, options, or process/operating conditions may result in a less accurate specifications
10 www.micromotion.com
June 2016 Technical Overview and Specification
Capabilities
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
Self-draining ● ● ● ● ● ●
Velocity indication ●
Known density
verification
◐ ● ● ◐ ◐ ●
High pressure(1) ◐ ● ● ● ● ◐ ● ◐
(1) Above 1494 psi (103 bar)
● Supported on all models ◐ Supported on some models
Wetted materials
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
www.micromotion.com 11
Technical Overview and Specification Summary June 2016
Outputs
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
Output variables
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
Density ● ● ● ● ● ● ● ●
Temperature ● ● ● ● ● ● ● ●
Concentration ● ● ● ● ● ● ● ●
Velocity ●
Gas specific gravity/BTU/
Wobbe index ● ● ●
Viscosity/referred
viscosity ● ● ●
Mass/net product flow ● (1) ● ● ●
(1) When connected to a volumetric flow meter
12 www.micromotion.com
June 2016 Technical Overview and Specification
Mounting
Current products Legacy products
Liquid Gas Liquid Gas
7835, 7845, 7826, 7827,
CDM FDM FVM HFVM GDM SGM 7847 7828, 7829 7812, 3098
Integral - field ● ● ● ● ● ● ● ● ●
● Supported on all models ◐ Supported on some models
25 or 25 or 6 or
Millimeters 23 25 or larger 6 or larger 23 25 or larger 6 or larger
larger larger larger
www.micromotion.com 13
Technical Overview and Specification Summary June 2016
Performance specifications
Reference operating conditions
For determining the performance capabilities of our meters, the following conditions were observed/used:
Water at 68 to 77°F and 14.5 to 29 psig (20 to 25 °C and 1 to 2 barg)
Accuracy is verified by industry leading accredited calibration stands according to ISO 17025
(1) Flow rate accuracies are base percentages. For total accuracy see the box on page 10. Stated accuracy includes the combined effects of repeatability, linearity, and
hysteresis. Specifications for ELITE ±0.0002 g/cm3 (±0.2 kg/m3) density accuracy are based on reference conditions of water at 68 to 140 °F (20 to 60 °C) and 15 to 30
psig (1 to 2 bar). All other specifications are based on reference conditions of water at 68 to 77 °F (20 to 25 °C) and 15 to 30 psig (1 to 2 bar).
(2) Sensor accuracies may vary with calibration option selected. Consult the sensor Product Data Sheet for details.
(1) Flow accuracies are base percentages. For total accuracy see the box on page 10. Stated accuracy includes the combined effects of repeatability, linearity, and
hysteresis.
(2) CMFS models only
(3) ±0.05% of rate or 1/2[(zero stability/flow rate) x 100]% of flow rate, whichever is greater.
14 www.micromotion.com
June 2016 Technical Overview and Specification
CMFS010 /10
1
DN2 4.03 0.484 110 110
CMFS015 /6
1
DN3 12.1 1.45 330 330
CMFS025 /4
1
DN6 77.0 9.23 2,100 2,100
CMFS040 /8
3
DN10 170 20.4 4,640 4,640
CMFS050 /2
1
DN15 250 30.0 6,820 6,820
CMFS075 /4
3
DN20 460 55.2 12,500 12,500
CMF010 /10
1
DN2 3.96 0.475 108 108
CMF025 /4
1
DN6 79.9 9.58 2,180 2,180
CMF050 /2
1
DN15 249 29.9 6,800 6,800
F-Series F025 /4
1
DN6 100 12 2,720 2,720
F050 /2
1
DN15 300 36 8,160 8,160
H-Series H025 /4
1
DN6 76 9 2,068 2,068
H050 /2
1
DN15 180 22 4,900 4,900
www.micromotion.com 15
Technical Overview and Specification Summary June 2016
LF3M /16
1
DN2 0.037 0.0043 1.00 1.00
LF4M /8
1
DN3 0.992 0.119 27.00 27.00
T-Series T025 /4
1
DN6 25 3 680 680
T050 /2
1
DN15 140 17 3,800 3,800
T075 /4
3
DN20 500 60 14,000 14,000
T150 1 /21
DN40 3,200 384 87,000 87,000
R-Series R025 /4
1
DN6 100 12 2,720 2,720
R050 /2
1
DN15 300 36 8,160 8,160
16 www.micromotion.com
June 2016 Technical Overview and Specification
Family Model lb/min kg/h SCFM (1) SCFH SCCM Nm3/h l/h
ELITE CMFS007 0.5 15 12 20
CMFS010 2 45 37 63
CMF010 1 34 28 48
www.micromotion.com 17
Technical Overview and Specification Summary June 2016
Family Model lb/min kg/h SCFM (1) SCFH SCCM Nm3/h l/h
H-Series H025 17 468 388 659
Notes
• Standard (SCFM) reference conditions are 14.7 psig and 60°F. Normal reference conditions are 1.013 barg and 0°C.
• Natural gas with molecular weight of 16.799 at 60°F (16°C) and 1014.7 psia (70 barg).
18 www.micromotion.com
Technical Overview and Specification Summary Product Data Sheet
PS-00232, Rev T June 2016
7835 (legacy) ±0.0001 g/cm3 ±0.1 kg/m3 ±0.00002 g/cm3 ±0.02 kg/m3
7845/7847 (legacy) ±0.0001 g/cm3 ±0.1 kg/m3 ±0.00005 g/cm3 ±0.05 kg/m3
Note
Meters not listed in the liquid density table are not designed to measure liquid density.
Note
Meters not listed in the gas density/specific gravity table are not designed to measure gas density/specific gravity.
Technical Overview and Specification Summary June 2016
Temperature accuracy
Temperature accuracy
ELITE ±1 °C ±0.5% of reading
LF-Series ±0.5 °C
CDM BS1904 Class, DIN 43760 Class A ±(0.15 +0.002 x Temp °C)
3098 (legacy) –
Temperature rating
Family Model °F (1) °C (1)
ELITE Standard models –400 to +400 –240 to +204
20 www.micromotion.com
June 2016 Technical Overview and Specification
(1) Temperature rating may be affected by electronics, hazardous area classification, and/or ambient temperature.
(2) Applications between +350 and +400 °F (+177 and +204 °C) must be approved by Micro Motion metallurgy.
(3) High-temperature option shown. Standard temperature range is –4 to +185 °F (–20 to +85 °C)
www.micromotion.com 21
Technical Overview and Specification Summary June 2016
(1) Models CMF010P, CMFS010P, CMFS015P, and CMF400P have nickel alloy C22 (N06022) tubes and stainless steel fittings.
22 www.micromotion.com
June 2016 Technical Overview and Specification
www.micromotion.com 23
Technical Overview and Specification Summary Product Data Sheet
PS-00232, Rev T June 2016
The Emerson logo is a trademark and service mark of Emerson Electric Co. Micro Motion, ELITE, ProLink, MVD and MVD Direct Connect marks are
marks of one of the Emerson Process Management family of companies. All other marks are property of their respective owners.
Micro Motion supplies this publication for informational purposes only. While every effort has been made to ensure accuracy, this publication is not
intended to make performance claims or process recommendations. Micro Motion does not warrant, guarantee, or assume any legal liability for the
accuracy, completeness, timeliness, reliability, or usefulness of any information, product, or process described herein. We reserve the right to
modify or improve the designs or specifications of our products at any time wihout notice. For actual product information and recommendations,
please contact your local Micro Motion representative.