Professional Documents
Culture Documents
DIV 9 FINISHES - Xls Version 1
DIV 9 FINISHES - Xls Version 1
Sagging or Running Irregular Wavy Lines Paint formulation w/ too low Sanding Irregularities and Repainting
pigment volume Proper Proportioning
Heavy and Careless Application Careful Brushing
Thin Consistency Paint
Storm Spotting Unisightly and Irregular Rains and Electric Storms Rub spots with Alcohol
Color Change Subsequent Weathering
Stains Surface Discolorations Metal stains are caused by water Treat paint with 1/4 oz
dripping from exposed metal MERCURIC CHLORIDE per Gallon
Mildew stains caused by air-borne Remove Mildew growths by washing
fungi that feed on oil w/ 1 lb Tri-Sodium Phosphate or
Sodium Carbonate in 1 gal. h20
Checking Minute Cracks on the Surface Improper application Wire brushing affected areas and repainting
Improper formulation of undercoats Allow Sufficient Drying time bet. Coats
Formulation of Body Coat w/ min. amt of oil
Blistering and Peeling Swelling of the entire film Water pressure from behind the Cure means removal of paint and repainting
followed by break in film, peeling film due to faulty construction that Prevention necessitates removal of moisture
allows moisture seepage and abnormal sources, extensive repairs and waterproofing
condensation
When damp surfaces are covered by
quick drying paints
Spot Fading Color Changes and Uneven oil absorption Exercise proper painting technique
Flattening of Gloss in irregular Insuffecient coats
patches on film Or improper formulation of priming coat
Skimping or cheap paints
Wrinkling Tough, Leather like texturing Paint put on too thickly and not well Sanding and repainting if texture is slight
brushed out Strict adherence to high standards of
Too high proportion of oil in finish coats paint formulation and thorough brushing out
application