Professional Documents
Culture Documents
900AA
Ministry of Defence
Defence Procurement Agency, ADRP2
Abbey Wood
Bristol
BS34 8JH
OBSOLESCENCE NOTICE
All DTD specifications were declared obsolescent from 1 st April 1999. All DTD 900
series approvals also lapsed at that time. The standards will no longer be updated but
will be retained as obsolescent documents to provide for the servicing of existing
equipment.
Further Guidance
1. Scope
This specification describes the procedure governing the approval of proprietary materials and processes. It also
includes Appendices listing all materials and processes approved under its terms together with the name and address of
the manufacturer or proprietor, the trade name of the material or process, if any, and the approval serial number.
The terms “proprietary material’’ and “proprietary process” for the purpose of this specification are applicable to
materials or processes not covered by a BS aerospace, DTD or other specification approved by the procurement
Executive, Ministry of Defence.
As approval under this specification covers proprietary materials and processes, details of which may be divulged in
confidence to the Design Authority and/or Procurement Executive, Ministry of Defence, no specifications for the
individual items are available and enquiries should be addressed to the manufacturer or proprietor concerned.
3. Approval
(i) Approval is contingent upon:
(a) Satisfactory results having been obtained by the Design Authority (see Clause 2.(i) (d));
(b) The acceptance by Head of Materials and Structures, RAE, Farnborough, of the proposed schedule for routine
inspectional control (see Clause 2.(ii));
(c) The approval of an appropriate inspection organisation of the quality assurance system of the manufacturer of
the proprietary material or process.
(d) The restriction or use of the material or process to those applications defined under ‘Extent of Approval’ in
Appendices I, II or III of this specification.
It should also be noted that an Agreed Firms Schedule (AFS) alone is not a substitute for DTD 900 approval Materials
and processes covered only by an AFS must not be used for Grade A parts, nor in circumstances where prior approval
is required by the provisions of Defence Standard 00-970 or other Design Document.
(ii) The letter of approval will specify:
(a) The extent of the approval;
(b) An approval serial number, eg DTD 900/1234. This approval serial number must be quoted on all relevant
drawings, contracts, release notes, instructions for use and other documents wherein the material or process
is specified;
(c) The number of the relevant AFS.
(iii) Formal approval will be followed by the inclusion of the relevant details in Appendices I, II or III of this
specification.
(iv) Initial approval will be valid for five years and will be renewed subject to the design Authority supplying proof
of a continued requirement three months prior to the end of the approval period.
(v) The prior agreement of the Head of Materials and Structures, RAE, Farnborough must be obtained before an
approval may be transferred to another firm.
4. Inspection
(i) Each cast, batch or lot as defined in the Test Schedule of a Material for use in a Grade A or other critical part
is to be inspected to the requirements of the Test Schedule.
(ii) All materials and parts treated by a process approved under this specification shall be inspected to the
requirements of the appropriate Test Schedule.
(iii) Each batch or lot as defined in the Test Schedule of material for use in the make-up of a processing medium is
to be subject to inspection to the Test Schedule.
(iv) The Director of Aeronautical Quality Assurance Directorate may at any time call for check tests on samples
representing supplies delivered under the requirements of Clauses 4(i), 4(ii) or 4(iii).
Dr. G. Pocock
Head of Materials and Structures
RAE, Farnborough
APPENDICES
Appendices I, II and III include all proprietary items approved for use in the manufacture, operation or repair of
aerospace equipment, and are grouped in the following manner:
APPENDIX I Metallic Materials
Page
Brazing Metals and Solders 3
Bearing Materials 3
Non-ferrous Materials 4
Ferrous Materials 5
Heat and Wear Resisting Materials 5
APPENDIX II Non-Metallic Materials
Adhesives and Cements 7
Self Adhesive Films 8
Cleaning Materials 9
Corrosion Preventatives 9
Damping Fluids 9
De-icing and De-frosting Fluids 9
Filling Materials 10
Glass and Glazing Materials 10
Honeycomb Core Materials 10
Hydraulic Fluids 10
Insulating Materials 10
Jointing Materials 11
Lubricants 12
Metal Polishes 13
Paints and Varnishes 13
Plastics Materials 14
Rubbers and Synthetic Rubbers 15
Sealing Materials 16
Thread Compounds 17
Miscellaneous 17
APPENDIX III Processes
Processes Applied to Metals 19
Etching and Filming Treatments 19
Processes Applied to Non-Metallic Materials 19
APPENDIX IV is a numerical list and index of all current approvals, including cross-references to Appendices I, II
or III.
2
D.T.D. 900 AA
APPENDIX I
BRAZING METALS
AND SOLDERS
4018A Silver Brazing Alloy Grade MX-18 For silver soldering The Sheffield Smelting Co Ltd, PO Box 28,
Windsor Street, Sheffield S4 7WD
4535A Savbit No 1, Soft Solder For soldering of electrical, radio, Multicore Solders Ltd, Multicore Works, Hemel
etc connections, in lieu of solder to Hempstead, Herts.
BS 219.
4578 LM10A Silver-Tin Solder For use (1) where a high temperature of Johnson Matthey Metals Ltd, 81 Hatton Garden
functional use is involved, ie higher London EC1.
than that advisable for tin/lead solder
and (2) where a higher resistance to
corrosion than that provided by lead
containing solder is required.
4603 Silver Brazing Alloy MN2 For use on steel, including high alloy ditto
types and nickel alloys eg for elevated
temperature service.
4769A Silver Brazing Alloy Grade LX13 For silver soldering The Sheffield Smelting Co Ltd, PO Box 28,
Windsor Street, Sheffield S4 7WD.
4770A Silver-bearing, soft solder Grade For soft silver soldering ditto
ST400
4771A Silver Brazing Alloy Grade MX-18 For silver soldering ditto
plus (Melt-Esi Plus) I
4773A Silver-bearing, soft solder Grade ditto ditto
SXZ 500
4775A Silver-bearing, soft solder Grade
SLT 200 For soft silver soldering ditto
BEARING MATERIALS
4033 Glacier Standard Wrapped Bushes For use as wrapped bushes Glacier Metal Co Ltd, Kirkstyle, Kilmarnock,
Ayrshire.
4272A Ferobestos LA37 For use in bearings in under-carriage Tenmat Ltd, Materials, Engineering Division,
assemblies PO Box 22, Trafford Park, Manchester M17
1RU.
4273 Oilite Superload Grade A For sintered bearings. Manganese Bronze Ltd, Elton Park Works, PO
Box 19, Hadleigh Road, Ipswich, Suffolk.
4274 Oilite Superload Grade B ditto ditto
4275 Oilite Superload Grade C ditto ditto
4454B Holfos, BOHT Bronze Phosphor bronze castings including solid Holcraft Castings & Forgings Ltd, PO Box 24,
and cored sticks for bearings and other Whitehall Street, Rochdale OL12 0LL.
aerospace applications.
4518A Bound Brook Porous Bronze For filter elements in aerospace GKN Boundbrook Ltd, Trent Valley Road,
equipment. Lichfield, Staffs WS13 6HF.
4575A Glacier DU (Bearings) (Standard For application where an oil-free Glacier Metal Co Ltd, Kirkstyle, Kilmarnock,
Product) lubrication is specified. Ayrshire.
4576 Glacier DX Product For use in engine bearing applications ditto
4717 Glacier Standard DQ For applications where components Glacier Metal Co Ltd, Kirkstyle, Kilmarnock,
cannot conveniently be formed or Ayrshire
pressed from conventional bearing
materials and where it is undesirable to
employ conventional lubricants or
where reduced boundary friction is
required.
4805 Hidurax Special For use in bushes and other suitable Langley Alloys Ltd. Langley, Slough, Berks
aerospace applications SL3 6EA.
4811 Deva Metal Sintered Bearing For use in aerospace applications Glacier Metal Co Ltd, Argyle House, Joel Street,
Material Ref HCuSn 86.13/6- operating at elevated temperatures Northwood Hills, Middx. HA6 1LN.
1T1 (BH l/6)
4812 Deva Metal Sintered Bearing ditto ditto
Material Ref HCuSn 86.13/8-
1T1 (BH 1/8)
4813 Deva Metal Sintered Bearing ditto ditto
Material Ref HCuSn 86.13/10-
1T1 (BH 1/10)
4814 Deva Metal Sintered Bearing ditto ditto
Material Ref HCuSn Pb 83.
13/8-1 (BL 1/8)
4815 Deva Metal Sintered Bearing ditto ditto
Material Ref BL HCuSn Pb 83.
13/10-1 (BL 1/10)
3
D.T.D. 900 AA
APPENDIX I -continued
BEARING MATERIALS-
continued
4816 Deva Metal Sintered Bearing For use in aerospace applications Glacier Metal Co Ltd, Argyle House, Joel Street,
Material Ref BL 1/14A (Special operating at elevated temperatures. Northwood Hills, Middx HA6 1LN
Grade)
4824A Stellite Grade X40 (Castings and For use where resistance to heat, Deloro Stellite Ltd, Stratton St Margaret, Swindon
Forgings) abrasion and corrosion is required. Wilts.
4825 Deva Metal Sintered Bearing For use in aerospace bearing Glacier Metal Co Ltd, Argyle House, Joel Street,
Material Ref HCuSn 86.13/6-1 applications. Northwood Hills, Middx HA6 1LN
(B 1/6)
4827 Deva Metal Sintered Bearing ditto ditto
Material Ref HCuSn 86.13/8-1
(B 1/8)
4829 Deva Metal Sintered Bearing ditto ditto
Material Ref HCuSn 86.13/7-
1T1 (BH 1/7)
4854 Deva Metal Sintered Bearing ditto ditto
Material Ref FeCu 94.04/8-
2MoT1 (FH 1/8)
4902A Fiberslip B30 Laminate Bonded PTFE/glass fibre laminate, self- Ampep Ltd, 108 Strode Road, Clevedon, Avon
lubricating bearing material, plain and BS21 6QQ.
flanged bushes, thrust pads and rings,
flat bearings and rollers for use in
specified aircraft applications. The
Bonding Process is limited to bonding
the laminate to specified metals.
4903A Fiberslip B40 Laminate ditto ditto
4933A Fiberslip B60 Laminate ditto ditto
4958 Deva Metal Sintered Bearing For use in aerospace bearing Glacier Metal Co Ltd, Argyle House, Joel Street,
Material Ref HCuSn Pb 84.13/6 Northwood Hills. Middx HA6 1LN
-1 (BL 2/6 now BL 4/6)
4964A Fiberslip B70 Laminate Bonded PTFE/glass fibre laminate, self- Ampep Ltd, 108 Strode Road, Clevedon, Avon
lubricating bearing material, plain and BS21 6QQ.
flanged bushes, thrust pads and rings,
flat bearings and rollers for use in
specified aircraft applications. The
Bonding Process is limited to bonding
the laminate to specified metals.
4987 Uniflon R Bearing Liner Bonded PTFE/nylon laminate, self- Rose Forgrove Ltd, Rose Bearings Div. Saxilby
lubricating bearing material for use in Lincolnshire LN1 2LW.
aerospace applications.
6011 X-140 Bearing Material Bonded PTFE/glass fibre laminate, self- Ampep Ltd, 108 Strode Road, Clevedon, Avon
lubricating bearing material, plain and BS21 6QQ.
flanged bushes, thrust pads and rings,
flat bearings and rollers for use in
specified aircraft applications. The
Bonding Process is limited to bonding
the laminate to specified metals.
6015 X-170 Bearing Material ditto ditto
6048 Ferobestos LF10, LF103, LF107 Bonded asbestos cloth/phenolic resin Tenmat Ltd, Engineering Materials Division, PO
LF1037 used as bearings and wearing strips; Box 22, Trafford Park, Manchester M17 1RU.
heat insulation strips, maximum
temperature 175°C.
NON-FERROUS MATERIALS
I
4433A Telcon Cu-Be 250 For instruments and other aerospace Telcon Metals Ltd, PO Box No 12, Manor Royal,
applications.
4606B Sintermatt HA 190 For use as mass balance weights in
aerospace equipment.
4613 GEC Heavy Alloy For use as mass balance weights in
aerospace equipment.
4703A Avro Aluminium Honeycomb For use in aerospace applications. British Aerospace Aircraft Group,
Manchester Division, Chester Road, Woodford,
Bramhall, Stockport, Cheshire SK7 1QR.
4749A Baker 26K Iridium Drawn Wire For use as centre and earth electrodes Englehard Industries Ltd, Davis Road,
of sparking plugs. Chessington, Surrey.
4764E Aeroweb Aluminium Alloy For use in the construction of aerospace Ciba-Geigy (UK) Ltd, (Bonded Structures
Honeycomb, Core Types NS3, parts. Division), Duxford, Nr Cambridge CB2 4QD.
3003, 5052, 5056.
4849A Mattey 3 Chromium-Copper Alloy For use in aerospace applications. Johnson Matthey Metals ltd, 81 Hatton Garden,
London EC1.
4
D.T.D. 900 AA
APPENDIX I-continued
NON-FERROUS MATERIALS-
continued
4869A Alloy 625 For electrical contacts particularly for Johnson Matthey Metals Ltd, 81 Hatton Garden,
brushes in contact with slip rings and London EC1.
similar applications.
4888a Silver Cadmium Oxide Grade For use as electrical contact material in Thessco Ltd, Royds Mills, Windsor Street,
GD 25. aerospace equipment. Sheffield S4 7WD.
4890A Silver Cadmium Oxide GD 10 ditto. ditto.
4891A Silver Graphite Grade GC10 ditto. ditto.
4892A Silver Nickel Grade GN 1 ditto. ditto.
6009 Alloy 625R For use as wire, strip or pressed parts for Johnson Matthey & Co Ltd, Exhibition Grounds,
contacts brushes and similar applica- Wembley, Middlesex.
tions in the aerospace industry.
FERROUS MATERIALS
4801B Metcoloy 2-NS Wire Chromium steel wire for use in building Metco Ltd, Chobham, Woking, Surrey GU24 8RD.
up of worn, over-machined or
corroded components and the
restoration of press fits by spray
application from pistol or gun.
5
D.T.D. 900 AA
APPENDIX I-continued
6
D.T.D. 900 AA
APPENDIX II
7
D.T.D. 900 AA
APPENDIX II-continued
8
D.T.D. 900 AA
APPENDIX II-continued
CLEANING MATERIAL
4899 Ardrox 2601 (Application For cleaning carbonised deposits from Ardrox Ltd, 74 Furlong Road, Bourne End,
Cleaners) jet engines in situ. Bucks.
4904A Striplene 300 For hot stripping metal engine Henkel Chemicals Ltd, Henkel House, 292-308
components of carbon deposits and Southbury Road, Enfield, Middx.
paint residues.
4968A Paint Remover Heavy Duty, Designed for use at elevated temper- Ardrox Ltd, 74 Furlong Road, Bourne End,
Hot Bath Ardrox 26HT. atures. If used outside strictly defined Bucks.
operating conditions severe corrosion
may result. Before use a suitable
process specification must be
submitted and approved. Not to be
used on steel2 parts of UTS greater than
1400 n/mm , if stressed.
6000A Paint Remover Ardrox 29 and Removal of paint from hydraulic Ardrox Ltd, 74 Furlong Road, Bourne End,
Seal 29 components. Bucks.
6013 Paint Remover Dasic D23 and Heavy duty paint strippers for use Dasic International Ltd, Winchester Road, Romsey,
D23V on aircraft epoxy and polyurethane Hants SO5 8YD.
paint systems.
CORROSION PREVENTATIVES
4684 Frin Fretting Corrosion Inhibitor. For use in blade root bearings for The Timken Co, British Timken Division, Duston,
Rotol propellers. Northampton NN5 6UL.
DAMPING FLUIDS
4386A Arlcone Fluid For use in filling Dowty liquid springs. Dowty Rotol Ltd, Cheltenham Road, Gloucester
GL2 9QH.
9
D.T.D. 900 AA
APPENDIX II-continued
FILLING MATERIALS
4045 Pop Rivet Filler Ryland 2313 For filling during pop rivetting Llewellyn Ryland Ltd, Haddon Street,
operations. Birmingham B12 9DB.
4548 PR Void Filling and antichafing For filling voids in pressure cabins and PRC (UK) Ltd, Portland Road, Newcastle-on-Tyne
compound preventing chafing of bag tanks. NE2 1BL.
4579 Araldite PZ985/HZ985 systems Filling and coating resin for porous Ciba-Geigy (UK) Ltd, Plastics Division, Duxford,
phenolic resin impregnated asbestos Cambridge CB2 4QD.
mouldings.
4742B Chemical Resistant Stoppers For filling pop rivets and minor Imperial Chemical Industries Ltd,
a. F581-2016 depressions-two part cold curing Paints Division, Wexham Road, Slough, Berks.
F581-2017 stopper. SL2 5DS.
6105 Double Bond Putty and Cream For a cold curing filler and surfacing Stag Polymers and Sealants, Tavistock Road, West
(RS 1478/l and RS 2688/3). compound. Drayton, Middx.
HONEYCOMB CORE
MATERIALS
4397A Aeroweb Types Go and GI Core material for aerospace sandwich Ciba-Geigy (UK) Ltd, (Bonded Structures
structures Division), Duxford, Cambridge CB2 4QD.
HYDRAULIC FLUIDS
4081C Lockheed No 22 Fluid For use in the main undercarriage Automotive Products Ltd, AP Precision Hydraulics
shock absorbers in Comet and Nimrod Division, Shaw Road, Speke, Liverpool
aircraft. LS24 9JV.
4881D Skydrol 500B Hydraulic Fluid for VC10 aircraft Monsanto Ltd, Chineham Court, Chineham,
Basingstoke, Hants.
INSULATING MATERIALS
4455C Dalfratex Batt Fibrous thermal insulating material for The Chemical & Insulating Co Ltd, West Auckland
use at temperatures up to 1100°C. Road, Darlington, Co Durham DL3 0UR.
4503D Dalfratex Silica Cloths For use in the manufacture of thermal ditto.
insulating blankets resistant to
temperatures up to 1000°C.
4527D Dalfratex Silica Yarn and Cordage ditto. ditto.
4562D Dalfratex Silica Tapes ditto. ditto.
4577C Dalfratex Silica Sleeving For use as a thermal insulant up to ditto.
1000°C.
10
D.T.D. 900 AA
APPENDIX II-continued
INSULATING MATERIALS
-continued
6005 Fibreglass Aircraft Insulation For use as a thermal and an acoustical Pilkington Ltd, St Helens, Merseyside WA10.
insulation material in aircraft
environments not exceeding 250°C.
6027 Glass Fibre Insulation Batting For thermal and acoustical insulation on Jecco Aviation Ltd, Jecco House, Windham Road,
aircraft at temperatures up to 250°C. Bournmouth BA1 4RG.
6030A Dalfratex Silica Rope For use in the manufacture of thermal The Chemical & Insulating Co Ltd, West
insulants, resistant to temperatures up Auckland Road, Darlington, Co Durham
to 1000°C. DL3 0UR.
6039 Filmed glass fibre insulation Glass fibre batting, filmed with Jecco Aviation Ltd, Jecco House, Windham Road,
unplasticised polyvinyl chloride (PVC) Bournmouth BA1 4RG.
containing glass fibre batting
conforming to DTD 900/6027.
6084 Sintered Ceramic Materials, The approval relates to sintered alumina Lodge Ceramics Ltd, St Peters Road, Rugby,
Sintox-Hylumina for use in special application ceramics, Warwickshire.
engine ignition systems electrical
insulation, metal-ceramic assemblies
and sealed terminals. Suitable for use
where high temperatures and chemical
and mechanical erosion are required.
JOINTING MATERIALS
4134B Plastic Hermetite compound Sealing compound resistant to petrol, Stag Polymers 8 Sealants Ltd, Tavistock Road,
(heavy, medium and light mineral oil and ester lubricant. West Drayton, Middx.
grades)
4301A Celloseel A pigmented varnish jointing compound PPG Ind (UK) Ltd, Rotton Park Street,
where resistance to kerosine or ester Birmingham, West Midlands B16 0AD.
lubricants is required.
4344 High Temperature Jointing For prevention of leaks of gases at high Dalton & Co Ltd, Belper, Derby DR5 1WF.
Compound Silkolene, Grade temperatures on Rolls Royce turbine
762. engines.
4387B Flexible Hermetite 1326B Non-hardening liquid engine jointing Stag Polymers and Sealants Ltd, Tavistock Road,
compound resistant to mineral oils, West Drayton, Middx.
ester lubricants, avaition fuels and
water.
4434B J 11185 Heat Hardening Adhesive For use in the construction of hollow BP Chemicals Ltd, Sully, Penarth, S Glamorgan,
steel propeller blades.
4488A Jointing Compound JC 5A Jointing compound, used as substitute Desoto Titanine Ltd, Industrial Paints, Darlington
for DTD 369B where resistance to Road, Shildon, Co Durham.
ester lubricants is required.
4544D Super Twilstele Jointing High temperature jointing material James Walker & Co Ltd, Lion Works,
Woking, Surrey.
4549A Celloseel QH Jointing compound, used as a substitute PPG Ind (UK) Ltd, Rotton Park Street,
for DTD 369B where resistance to Birmingham, West Midlands B16 0AD.
ester lubricants, kerosine and heat are
required.
4566 Araldite AV12 l/Hardener HY951 As a bonding, surfacing or gap-filling Ciba-Geigy (UK) Ltd, Plastics Division, Duxford,
medium. Cambridge CB2 4QD.
4586B Hylomar Jointing Compounds For use as a sealant between metal faces Marston Lubricants, Naylor Road, Liverpool.
SQ32, Grade S, H, M, L and R in engines
4645A Non-hardening Jointing Compound Anti-fretting compound resistant to ester Desoto Titanine Ltd, Industrial Paints, Darlington
JC6 lubricant (anti-fretting approval Road, Shildon, Co Durham.
subject to type test in specific joint).
4766A Zinc Chromate Pigmented Silicone Anti-corrosion jointing compound for ditto.
Grease LR4871 non-rotating axle assemblies required
to be broken down and adjusted.
4909 Nebar, Standard grade Jointing material essentially for gasket James Walker Ltd, Lion Works, Woking, Surrey.
applications.
4911 Nebar, HP grade As above, but where heavy loads are ditto.
involved.
4971 Mastinex Jointing Compound High temperature (to 130°C) resistant PPG Ind (UK) Ltd, Rotton Park Street,
AF5/34A (5982N 3010) non-drying jointing compound for anti- Birmingham, West Midlands B16 0AD.
corrosive purposes.
4982 Nebar, Jointing Material LRC 631 Fuel tank gaskets James Walker Ltd, Lion Works, Woking, Surrey.
6054 Wellseal RS2965 Non-Flammable The approval is for use as a jointing Stag Polymers Ltd, Tavistock Road, West Drayton,
Engine Jointing Compound compound for metal-to-metal faces Middx.
where a tolerance to vibration
distortion or thermal expansion is
necessary. Can be used in contact with
mineral oil and gasoline up to 200°C.
11
D.T.D. 900 AA
APPENDIX II-continued
JOINTING COMPOUNDS-
continued
6107 Casting Compound RS 2958 Pts A For encapsulation of electronic Stag Polymers, Tavistock Road, West
and B components. Drayton, Middx.
LUBRICANTS
4630A Rocol MX-33 For use on certain precision ball Rocol Ltd, Rocol House, Swillington, Leeds, West
bearings and actuator gear-boxes. Yorkshire LS26 8BS.
4639 Dag Dispersion 580 Dry lubricating coating for certain metal Acheson Colloids Co, PO Box 12, Prince Rock,
parts. Plymouth, Devon PL4 0SP.
4647 Molydag 709 Bonded dry film lubrication for certain ditto.
metal parts.
4648A Moly VI Bond 444 Bonded dry lubricating coating K S Paul Ltd, Nobel Road, Eley Estate
London W18 3DE.
4669 Moly Paul Polypaste 300 (Air) For use as an anti-seize and lubricant ditto.
in certain aircraft and GW equipment.
4677A Emralon 810 For producing anti-wear and low friction Acheson Colloids Co, PO Box 12, Prince Rock,
surfaces on mechanical parts. Plymouth, Devon PL4 0SP.
4752A Moly Paul Moly-ITC-Bond Bonded dry lubricating coating K S Paul Ltd, Nobel Road, Eley Estate
London W18 3DE.
4754 Moly Paul Silicone Paste 500 (Air) For certain anti-fretting and anti-seize ditto.
applications in specified engines and
ERUs.
4802B Esso Andok 260 For lubrication of gearbox drive shaft Esso Petroleum Co Ltd, Esso House,
universal joints. Victoria Street, London SW1 5JW.
4872A Mobilplex 47 Lubrication of cartridge starters, Type Mobil Oil Co Ltd, 54/60 Victoria Street, London
SBC 720. SWlE 6QB.
4877A Hellerine M A lubricant for fitting cable binding and Bowthorpe Hellermann Ltd, Hellermann Electrical
identification sleeve, and for fitting Division, Pennycross Close, Plymouth, Devon
cables in aircraft. PL2 3NX.
4910A Beacon Q330 Grease Lubricant for the tailplane actuator, slat Esso Petroleum Co Ltd, Esso House,
screwjack and flap transmission Victoria Street, London SW1 5JW.
system of VC10 aircraft.
4913A Aero Shell Fluid 2XN An inhibition oil for use in the engine Shell (UK) Oil Ltd, PO Box 148, Strand, London
and tranmission of the Sioux WC2R 0DX.
helicopter.
4914A Rocol GG 17866 Grease Lubricant for Bowden cables Rocol Ltd, Rocol House, Swillington, Leeds, West
Yorkshire LS26 8BS.
4959A Dry Film Lubricant PL94 Bonded dry film lubricant coating and PPG Ind (UK) Ltd, Rotton Park Street,
(Formula E3699) anti-fret media. Birmingham, West Midlands B16 0AD.
4966B Hydrotype 1842B Traction fluid in certain Lucas constant Elf Oil (GB), Elf House, PO Box 80, Woodland
speed drive units. Road, Altringham, Cheshire.
4972 Rocal MV-4 Dry film lubricant for titanium fasteners Rocol Ltd, Rocol House, Swillington, Leeds, West
in aircraft. Yorkshire LS26 8BS.
4980 Rocol Grease MX-44 Lubricant for nozzle bearing races of ditto.
Pegasus engines.
4981A Aviation Oil S8350 Gearbox Lubricant for certain Shell (UK) Oil Ltd, PO Box 148, Strand, London
helicopters. WC2R 0DX.
4990 Rocol MHT Grease Lubricant for the HP compressor Rocol Ltd, Rocol House, Swillington, Leeds, West
variable inlet guide vane operating Yorkshire LS26 8BS.
mechanism of Pegasus engines Mks
101, 102, 103 and conversions.
6057 Arma G-213 (Formula 213-80) The approval is limited to use as a low Century Oils Ltd. New Century Street, Hanley,
Grease temperature lubricant on Nimrod Stoke-on-Trent ST1 5HU.
aircraft.
6065 Anti-seize Compound As an anti-seize compound in air Ilex Compounds Ltd, Reform Road, Maidenhead,
‘Coppercrest’ turbines. Berks SL6 8BY.
6073 PL 239 (Formula 3862 X9010) PPG Ind (UK) Ltd, Ladywood Works, PO Box
Dry Film Lubricant The approval is limited to the use of the 359, Rotton Park Street, Birmingham, West
material as a bonded dry film lubricant Midlands
and anti-fret media.
6079 Fomblin YR Fluid The approval is limited for use as a Rocol Ltd, Rocol House, Swillington, Leeds, West
lubricant on oxygen equipment and Yorkshire LS26 8BS.
accessories.
6080 Fomblin OT20 Grease The approval is limited for use as a ditto.
lubricant on oxygen equipment; at
temperatures below minus 10°C.
6081 Fomblin RT 15 Grease The approval is limited for use as a ditto.
lubricant on oxygen equipment.
12
D.T.D. 900 AA
APPENDIX II-continued
POLISHES
4258A Jove Wadpol Polish Type HR For polishing bare-metal aircraft Valay Industries Ltd, Clough Mill, Shelf, West
Yorks HX3 7JY.
4438A Jove Wadpol Polish Type K2 For polishing bare-metal aircraft ditto.
13
D.T.D. 900 AA
APPENDIX II-continued
PLASTIC MATERIALS
4365 Araldite MY753/Hardener 951 Encapsulation of electrical components. Ciba-Geigy (UK) Ltd, Plastics Division, Duxford,
Cambridge CB2 4QD.
4875A Bristol Armour, Grades BA PL Plastic Armour Bristol Composites Engineering BP, Avonmouth
105 BA PL 95 Road, Avonmouth, Bristol BS11 9DU.
4974A Araldite MY750/Hardener HT 972 Laminating Resin for the fabrication of Ciba-Geigy (UK) Ltd, Plastics Division, Duxford,
fins for drop tanks for Jaguar aircraft. Cambridge CB2 4QD.
4986A Bristol Armour Grade 86F As a light weight armour in aircraft Bristol Composite Materials Engineering BP
Avonmouth Road, Avonmouth, Bristol
BS11 9DU.
6004B Flomat Polyester/Glass Mat For the reinforcement of the alloy skins Freeman Polymers Ltd, PO Box 8, Ellesmere
on the removable fin for the Jaguar Port, Wirral, Cheshire L65 4AH.
Drop tank.
6014 Polytherm UG PVC film for facing glass fibre mat, used Fibreglass Ltd, Insulation Division, Prescot Road,
for insulation in aircraft where the St Helens, Merseyside WA10 3TR.
maximum temperature does not exceed
80°C.
6024 Fibredux 914 resin impregnated For aerospace structural parts Ciba-Geigy (UK) Ltd, (Bonded Structures Divis-
Grafil XA-S carbon fibre sheet ion), Duxford, Cambridge CB2 4QD.
and tape.
6025 Polyester Resin RP13 As a low pressure laminating resin for Plessey Materials, Plessey Connectors Ltd, Wood
radomes. Burcote Way, Towcester. Northants NN12 7JN.
6028 Polypenco Acetal Rod For the manufacture of switch blocks Polypenco Ltd, 83 Bridge Road East, PO Box 56,
on ‘G’ switches. Welwyn Garden City, Herts.
6037 Plessey P10 Foam Rigid Polyester/urethane foam charact- Plessey Materials, Plessey Connectors Ltd, Wood
erised by its fine cell structure, with Burcote Way, Towcester, Northants NN12 7JN.
controlled mechanical and electrical
properties; for use up to a maximum
200°C, used as an interlaminar foam
in the construction radomes and other
structural applications.
14
D.T.D. 900 AA
APPENDIX II-continued
PLASTIC MATERIALS
-continued
6052A Araldite LY1927GB and Hardener The approval relates to the use of a cold Ciba-Geigy (UK) Ltd, Plastics Division, Duxford,
HY 1927 GB setting epoxy laminating resin, for the Cambridge CB2 4QD.
production of high performance
composite materials in aerospace
applications where the operating
temperature does not exceed 100°C.
6061 Epikote 815 Resin The approval relates to the use as a Shell Chemicals (UK) Ltd, 1 Northumberland
laminating resin with a suitable Avenue, London.
hardener for the fabrication of
aerospace structural components
fabricated by a wet lay-up technique.
6070 Glasscloth Reinforced Polymethyl- The approval relates to the use of a British Aerospace Aircraft Group, Kingston Brough
methacrylate Resin Laminate glasscloth reinforced polymethylmeth- Division, Hamble, Southampton SO3 5NF.
crylate resin laminate intended for
local edge reinforcement of aircraft
transparencies where the forming
temperature of the acrylic shape does
not exceed 160°C.
6071 Polyethylene Terephthalate/Fabric The approval relates to the use of a British Aerospace Aircraft Group, Kingston-
Reinforced Polymethyl meth- polyethylene terephthalate (Terylene) Brough (Division) Hamble, Southampton
acrylate Resin Laminate fabric reinforced poly-methyl metha- SO3 5NF.
crylate resin laminate intended for
local edge reinforcement of aircraft
transparencies, where the forming
temperature does not exceed 160°C.
15
D.T.D. 900 AA
APPENDIX II-continued
SEALING MATERIALS
4058 Bostik Sealing Compound 1752 For pressure sealing of cabins, cockpits Bostik Ltd, Ulverscroft Road, Leicester LE4 6BW.
and integral tanks.
4451A Scotchseal Industrial Adhesive 750C Pressure cabin sealing 750C for pressure 3M (UK) Ltd, Gorseinon Road, Penllergaer,
and 802 gun or trowel application; 802 for Swansea, SA2 1GD.
brushing.
4452 Scotchclad Fuel Resistant Coating Barrier coat over sealants on interior of ditto.
776 integral fuel tanks.
4493 Sealing Compounds Barrier coats over polysulphide sealing PRC (UK) Ltd, Portland Road, Newcastle-upon-
PR 1005 (Amber) compounds on integral fuel tanks. Tyne NE2 1BL.
PR 1005L (Red)
PR 1005 BT
4502A Sealing Compounds Dual purpose sealants for (1) Integral ditto.
PR 1221B fuel tanks when used in conjunction
PR 5501 (½ hour) with sealant top coat. (2) Pressure
cabin sealing (3) Sealing the edges of
polyvinyl butyral interlayered safety
glass.
4506 Sealing Compound Dual purpose sealant of brushing con- ditto.
PR 1221 BT sistency for (1) Pressure cabins and (2)
PR 5401 (½ hour) Integral fuel tanks when used with an
approved top sealing coat.
4523 Access Door Sealant PR1301 Sealing access doors in integral tanks ditto.
and other places where sealants may be
broken.
4582C Polycast Type 2 Two part cold setting sealing and Alfred Jeffrey & Co Ltd, Hall End Works, Church
caulking compound for fillet sealing Lane, West Bromwich, West Midlands
along overlapped external butt skin B17 1BN.
joints and other crevices.
4590 Brushable Sealing Compound PR Brushing-type polysulphide sealant for PRC (UK) Ltd. Portland Road, Newcastle-upon-
1422 Class A integral tanks and pressure cabins for Tyne NE 2 1BL.
use at temperatures up to 145°C;
sealing of root end covers of Scout and
Wasp wooden tail-rotor blades.
16
D.T.D. 900 AA
APPENDIX II-continued
SEALING MATERIALS-
continued
4611 Sealing Compound 1431 Type 1 A faying surface polysulphide sealant, PRC (UK) Ltd, Portland Road, Newcastle-upon-
and 2 for integral tanks and pressure cabins Tyne NE2 1BL.
for use up to 145°C (of two degrees of
open time and cure).
4625 Sealing Compound PR 1201Q For sealing and potting electrical ditto.
equipment.
4626 Sealing Compound PR 720 For sealing and potting electrical equip- ditto
ment where a lower viscosity than PR
1201 Q (DTD900/4625) is required.
4686 Bostik Sealing Compound No 2102 For glazing laminated windscreens Bostik Ltd, Ulverscroft Road, Leicester LE4 6BW.
Parts 1 and 2 where a non-flowing material is
required.
4690 Boscoprene Sealing Compounds For sealing fuel tank and pressure ditto.
No 2114 Filleting cabins.
No 2115 Brushing
4694A Silastic 9161 RTV Rubber. Encapsulation and/or sealing electrical ditto.
components.
4720A Silcoset 100 Potting and encapsulation of electrical Imperial Chemical Industries Ltd, (Organics
and electronic equipment. Caulking Division), Stevenston, Ayrshire KA 20 3LN.
and sealing of aircraft. Fabrication of
silicone parts where DTD 818 was not
applicable.
4721A Silcoset 101 ditto. ditto.
4778 Silcoset 105 ditto. ditto.
4868A Sealing Compound PR 1422 Quick repair sealant for integral fuel PRC (UK) LTd, Portland Road, Newcastle-upon-
Class B tanks, fuel cell cavities, and pressure Tyne NE2 1BL.
cabins.
4900A Sealing Compound PR 1431T Thixotropic compound for sealing ditto.
vertical faying surfaces of integral fuel
tanks pressure cabins and for use as
general assembly jointing compound.
4927 Scotchseal Industrial Adhesive 801 Integral fuel tanks and pressure cabin 3M (UK) Ltd, Gorseinon Road, Penllergaer,
(Class BZ non-crazing) sealant. Swansea, SA4 1GD.
4954A Silane Primer 9281 for polysul- Primer system used with two-part cold Bostik Ltd, Ulverscroft Road, Leicester LE4 6BW.
phide sealants curing sealants for use in fuel tanks and
pressure cabins.
6021 Sealing Compound PR 1425 For sealing aircraft windows, pressur- PRC (UK) Ltd, Portland Road, Newcastle-upon-
ised cabins and integral fuel tanks. Tyne NE2 1BL.
6051 Sealing Compounds 2230 and The approval relates to the use as a Bostik Ltd, Ulverscroft Road, Leicester.
2232 with primer M662 sealant for integral fuel tanks or fire
walls.
6075 Silicone Adhesive/Sealant The approval relates to the use as a fire Silicone Products (General Engineering Products),
RTV106, Primers SS4004 wall sealant within the temperatures Silicone House, Cranfield Road, Lostock, Bolton.
and SS4044 range -60°C to +200°C.
6076 Silicone Adhesive Sealant RTV159 ditto. ditto.
6092A Polysulphide Sealant PR1750 For a two-part sealant curing by PRC (UK) Ltd, Portland Road, Newcastle-upon-
Classes A B and C addition of an acceleration, not Tyne NE2 1BL.
dependent on solvent evaporation,
cured sealant has good resistance to
petroleum based oils and fuels. Can be
used between -53°C and 182°C.
THREAD COMPOUNDS
4042A Aquadag For thread lubrication on low-pressure Acheson Colloids Co, PO Box 12, Prince Rock,
aircraft oxygen systems. Plymouth, Devon PL4 0SP.
MISCELLANEOUS
4867 Emergency Markings Beta-lights Completely sealed self-luminous source Saunders Roe Developments Ltd, Millington Road,
derived from a phosphor activated by Hayes, Middlesex UB3 4NB.
Tritium gas for emergency signs in
aircraft.
17
D.T.D. 900 AA
APPENDIX II-continued
MISCELLANEOUS-continued
4931A Coolanol 25R Coolant for AWG11/12, Cooling Monsanto Ltd, Chineham Court, Chineham,
systems of UK versions of McDonnell Basingstoke, Hants.
Douglas Phantom II
4940A Coolanol 35 Coolant liquid in Transmitter ditto.
ARI 23165.
4993 Flutex PP3 Dielectric coolant in the high power ISC Chemicals, St Andrews Road, Bristol, Avon
travelling wave tube of Radar AR1 BS11 9HP.
5980.
6032 Backing Board FPT/BB/803 For use as a backing board in conjunc- FPT Industries, The Airport, Portsmouth.
tion with flexible self-sealing fuel
cells.
6055 Fire Sleeve AE 102(FG) The approval relates to the use as a Aeroquip (UK) Ltd, Aeroquip Aerospace Division,
protective fire sleeving on a varied range Broadground Road, Lakeside, Redditch Worcs
of flexible hose assemblies; suitable for B98 8YS.
use in designated fire zones with a
temperature range -55°C to +260°C.
18
D.T.D. 900 AA
APPENDIX III
PROCESSES APPLIED
TO METALS
4216 Al-fin Process For bonding aluminium and aluminium Wellworthy Ltd, Lymington, Hants SO4 9YE.
alloys to metallic materials for
application involving heat dissipation,
heat exchangers, protection against
high temperature oxidation, and where
joining by aluminium bonding is
appropriate.
4395A Solaramic process For the treatment of piston engine Ferro (GB) Ltd, Ounsdale Road, Wombourne,
exhaust systems of military aircraft. Wolverhampton, West Midlands WV5 8DA.
4627 Deoxidine 624 For preparation of clad aluminium alloy Imperial Chemical Industries. Ltd,
prior to the application of the ICI (Paints Division), Wexham Road, Slough, Berks
alocrom process. SL2 5DS.
4819A Pyroblak Black oxide treatment Process for parts which run in a Brent Chemicals, Ridgeway, Iver, Bucks SLO 9JJ.
for steels maintained environment of oil or
grease. The process shall not however
be applied to steels of a minimum
tensile strength of 90 tons/force/sq in
(1400 x 10 N/m 2). Bearing steels to
Spec EN/31/SI35/SI36 are excluded
from this restriction.
6059 Tufftride TF1, TF1/AB1 Low temperature (570-580°C) salt bath Keighley Laboratories, Croft House, South Street,
nitriding process. Keighley, West Yorks.
6068 Sermetal Processes (5375, 5380, The approval relates to the preparation Sermetech (UK) Ltd, High Holborn Road, Codnor,
1141, 1142, 2241, 2242) of corrosion/erosion resistant coatings Ripley, Derbyshire DE5 3NW.
for use on engine components
operating at temperatures not
exceeding 650°C.
6069 Niflor Coating process The approval relates to the preparation Montgomery Plating Co., Godiva Place, Coventry.
of Low-friction surfaces on metal
substates.
6086A Alloy and pure metal powders The extent of the approval is for these Union Carbide (UK) Ltd. Drakes Way, Green-
applied by detonation gun L W- 1, powders, applied either by detonation bridge Industrial Estate, Swindon, Wilts.
LW-18, LW-5, LW-15, LC-1-15, gun (6086A) or a plasma process
LC-1-25, LC-1-H, LDT-400 and (6087A), for use where resistance to
WDT-800 heat, wear and corrosion are required.
6087A Alloy and pure metal powders ditto. ditto.
applied by Plasma Process,
LCW-1, LCW-2, LC-4 and
LW-11B
19
D.T.D. 900 AA
APPENDIX IV
Approval Material and/or Process Page Approval Material and/or Process Page
No. No.
4018A Silver Brazing Alloy Grade MX-18 . 4576 Glacier DX Product 3
4033 Glacier StandardWrapped Bushes 4577C Dalfratex Silica Sleeving . . . .. 10
4042A Aquadag 4578 LM 1OASilver-Tin Solder. 3
4045 Pop Rivet Filler Ryland 23 13 : : : 4579 Araidite PZ985IHZ985 System: : : : 10
4051 Perspex Protective Lacquer F962-5005 . 4582C Polycast Type 2 16
4058 Bostik Sealing Compounds 1752 4586B Hylomar Universal Jointing Compound SQ32 : 11
4069 Synthetic Rubber Sheet Hycatrol4/26, 4140 4590 Bmshable Sealing Compound PR 1422 Class A 16
4077A Almecv No 100 4603 Silver Brazing Alloy MN2 . . . . 3
4079A Cellon Heat-Resisting Paint E3678136L : .4606B m 4
4081C Lockheed No 22 Fluid . . . iI;; w; 1431 Type i and’Type 2 : 17
4083 Pylumin Process 4
4088A Durameg Enveloping Varnish : : : 4625 Sealing Compound PR 12bl Q: : : : 17
4091 Alocrom 100 Process 4626 Sealing Compound PR 720 . 17
4093A AerobcMetal Protection ‘Vat&h 1 : 4627 Devxidrine624 . . . . . . 19
4102A Non-Inflammable Flexible Lacquer . . 4630A Rocol MX-33 . . . . . . 12
4115 Deoxidine 202 (Refs 800-802) 4639 Dag Dispersion 580 12
4123A Rockfast non-inflammable Dope RD’1417’ 4645A Non-Hardening Jointing Compound JC6 : : 11
4124A High Temperature resisting Paint No 2845 4646B Stoving Enamel FSE 66 and Accelerator AC. 1 13
4134B Plastic Hermetite Compound(Heavy, medium and hgltt 4647 Molydag 709 . . . . . .
grades) 10 4648AMolyVJandBond444 . . ii
4142 Tensol Cement’No 3 : : : : : : 7 4650A Antifret Primer LR 8123 . . 13
4165A Dulux Red Anti-traking Varnish, Air Drying 4655EStelliteAlloy NoSFl . . . . .
F338-2026(spraying), F338-3510 . 13 4656B Stellite SF60 . :
4179 Prestik and Prestikol sealing compounds 5602 and 4660C Scuff-resistantfinish’ VA i2 RD 10 FR : : : 13
5603 . 4663A Scotchcal Brand, Fluorescent Film 3484, Series and
4181 Hycatrol Sheet’HP/257/2d, HPi257130, HP/257/40 : :s 3960. Scotchcal Edee. sealer . . : b
4195 Linatex . 15 4669 Moly Paul polypaste %I (Air). . 12
4216 Al-Fin Process : : : : : : : 4677A Emralon 810 . 12
4241A Hycatrol Mouldings HEV/4 . . . . . fZ 4679A Bostik 2401, Bostiktk D’and Bostikure 9252 :
4243 Gaco SE 85 Synthetic Rubber . . . . . 4684 Frin Fretting Corrosion Inhibitor %
4254A Bostik Primer 9252 . ;: 4686 Bostik Sealine Comoound No 2102-j Parts 1 and 2 17
4258A Jov Wadpol Polish Type HR : : : : : 13 4690 Boscoprene &aling’ Compounds No 2114 Filleting
4272A FerrobestosLA37 No.2115 Brushing 17
4273 Oilite Superload Grade A’ : : : : : : 4694A Silastic 9161 RTV Rubber : : : 17
4274 Oilite Superload Grade B . 3 4698 Scotchmitt Vinyl Adhesive 1099 . 7
4275 Oilkite Superload Grade C . 3 4703A Avro Aluminium Honeycomb 4
4292A Almeco No 199 . . 19 4705A Tensol No 70 . .
4301A Celloseel . . 4712A Wimet Grade W . :
4315 P561 Synthetic’Rubbcr ;: 4713 Araldite SY105 Hardener HY953F System:
43 19A Rubber Compounds0015 ‘and 0017 : : : : 15 4717 Glacier StandardDQ . :
4322 ‘Tico’ Adhesive 7 4720A Silcoset 100 . . . . 17
4344 High Temperature ’ Jointing Compound Silkolenk 4721A Silcoset 101 17
Grade 762 . 4732A Stellite Alloy No 1 Rod and &stings :
4348 Boscoprenecement No 2iOO Parts 1‘and 2 II 4733A Stellite Alloy No 6 Rod and Castings . :
4362 Redux 120 Adhesive 4734A Stellite Alloy No12 Rod and Castings .
4365 Araldite MY753/Hardener 951’ : : 1: 4735A Stellite Alloy No 3 Castings . . :
4386A Atclone Fhtid . 9 4742B Chemical ResistantStoppers:
4387B Flexible Hertnetite i326B’ : : : (a) F581-2016 . . . . .
4395A Solaramic Process . :i F581-2017 ;8
4397AAerowebTypdOand~I : : : 10 4749A Baker 26K Iridium Drawn Wire : : 4
4399. Prodor-Glas System . . . . 13 4752A Moly Paul Moly- OTC-Bond .
4433A Telcon Cu-Be 250 . . . 4754 Moly Paul Silicone Paste 500 (Air) : : ::
---‘#~B,Jl~,l~~~H~Hardening Adhesive . . . ” 1: ..4756BStellite SF6 ._ . ..,. . ;. ., ,-r,“..,.,.//... 5.
4438AJove Wadpol Polish Type K2 . . . 4757B Stellite SF12 . 5
4449B Durameg Varnish AS 5305 ii 4762A Clear Lacquer TVZ-119 and Activator TVZ-12i 13
4451A ScotchsealIndustrial Adhesive 75OC’and 802 16 4764E Aeroweb Aluminium Alloy Honeycombe Core Types
4452 ScotchcladFuel ResistantCoating 776 16 NS3, 3003, 5052, 5056
4454B Holfos, BOHT Bronze . . . 4766A Zinc Chromate Pigmented Silicone Grease LR4871 : 1’:
4455C Dalfratex Batt . 1; 4769A Silver Brazing Alloy Grade LX13 .
4483 Scotchgrip Industrial Adhesive ‘847 : : 4770A Silver-bearing, soft solder Grade ST400 : : : :
4485 Paint System, Matt Black, Spraying . 1’: 4771A Silver Brazing Alloy Grade MX-18 plus (Melt-Esi Plus)
4488A Jointing Compound JC 5A 11 4773A Silver-bearing, soft solder Grade SXZ 500 .
4493 Sealing Compounds PR 1005’ (Amber), PR 1005L 4775A Silver-bearing, soft solder Grade SLT 200
(Red1PR 1005 BT . . . . . 4778 Silcoset 105 .
4502A Sealing CompoundsPR 1221B, PR 5501 (% hour) :t 4782AStellite Grade 4 Casting Alloy : : : : :
4503D Defratex Silica‘Clotbs 4784A Stellite SF20 .
4506 Scaling Compound PR 1221 BT, Pd 54Oi (M hour) : f: 4785 Stellite Grade F Hard-facing Rod : : : :
4515A Lacquer for Rubber. . . . . . . 13 4787 Chemical Resistant Clear Lacquer F292-4 Activator
4518A Bou& Brook Porous Bronze 3 F273-5077,Thinners 850-805
4523 Access Door Sealant PR 1301 : : : : : 4788 ‘Sprabond Wire’-NS . . . ’ .: : :
4527DDalfratex Silica Yarn and Cloth . . . . :8 4789 Meteo Powder 16C . . . . .
4535A Savbit No 1 Soft Solder . . . . . . 3 479519Colmonoy No 4 . . . . .
4544D Super Twistele’Joint 4796 Colmonoy No 5 . . . . . . .
4548 PR Void Fiing and anti-chafing compound : : :A 4797 Colmonoy No 6
4549A Celloseel QH . 11 48OlB Metcolov I-NS Wire : : : : . .
4554A Silicone Varnish MS 997: : : : : : 13 4802BEssoAndok260 . . . . . . .
4562D Dalfratex Silica Tape 10 4805 Hidurax Special
4564 Evostik ,JmpactAdhesive 528 : : : : : 7 4811 Deva Metal Sintered’Beahng Material Ref BH iI6 :
4566 Araldite AV12UHardener HY951 4812 Deva Metal Sintered Bearing Material Ref BH 118 .
4569 Garan Finish for Glass Fibre Tapes and Webbings : ttJ 4813 Deva Metal Sintered Beating Material Ref BH 1110
4575A Glacier DU (Bearings) (StandardProduct) . . 3 4814 Deva Metal Sintered Bearing Material Ref BL l/8 .
20
D.T.D. 900 AA
APPENDIX IV-continued
Approval Material and/or Process Page Approval Material and/or Process Page
No. No.
4815 Deva Metal Sintered Bearing Material Ref BL 1110 3 4987 Unitlon R Bearing Liner . 4
4816 Deva Metal Sintered Bearing Material Ref BL 1/14A. 4 4988 Rubber Material 1694 15
4819A Pyroblak Black Oxide treatment for steels . 19 4989 Rubber Material 1590/l : 15
4824A Stellite Grade X4O (Castings and Forgings) 4990 Rocol MHT Grease. . 12
4825 Deva Metal Sintered Bearing Material Ref B l/ti : d 4993 Flutec PP3 la
4827 Deva Metal Sintered Bearing Material Ref B l/8 . 4998 Rubber Compound AM 8Ol2
4829 Deva Metal Sintered Bearing Material Ref B l/7 . t 4999 Rubber ComooundAM 0967 ii
4849A Matthey 3 Chromium-Copper Alloy : 4 6000A Paint Remover Ardrox 29 and Seal 29 . . .
4854 Deva Metal Sintered Bearing Material Ref FH i/8 : 4 6002 Heat-resisting ES Coating PL 205 . 1:
4865 Meteo Nickel-Clad Alumhrium Powder.404 . . 5 6OO3BThread Locking sealantsNos 222, 242, 638 : : 7
4867 Emergency Markings Beta-lights 6OO4BFlomat Polyester/GlassMat 14
4868A Scaling Compound PR 1422 Class 8’ : : : ::: 6005 Fibreglass, Aircraft Insulation : : : : : 11
4869A Alloy 625 . 5 16
4870B Heat resistine l&xv schemefor Ennines ichromatedj 6006
6OOSDPermabond
Rubber Compound100 Series,
1333 .Adhesives’ and ’ Associated
4872A Mobilex 47 s s -.. . . ‘: : . :: Activators . . . . . . . 7
4873A Gaco Grade SE70 15 6009 Alloy 625R 5
4875A Bristol Armour, Grades BA PL 105,’BA PL 95 14 6011 X-140 Bearing’Material : : : : : : 4
4877A Hellerine M 12 6013 Paint Remover Dasic D23 and D23V . 9
4aalDskydrol5ooB : : : : : : 10 6014 Polytherm UG . 14
4883 Rubber Compound 24-870 15 6015 X-170 Bearing Material : : : : : : 4
4888A Silver, Cadmium Oxide Grade ‘GD 25 : 6016 Triplex Ten-Twenty Glass
4890A Silver, Cadmium Oxide Grade GD 10 . z 6017 Processfor the toughening of s’bnctural gia.ss : : f8
4891A Silver Graphite Grade GC 10 . . . 6018 Rubber CompoundAM88. . . . . 16
4892A Silver Nickel Grade GNl . . . . : 6019 Rubber CompoundAM78. . . . . . 16
4897A Rubber Compound CG4/B 15 6021 Sealing Compound PR 1425 17
4899 Ardrox 2601 (Application Cleaners) : : 9 6022 Silicone Rubber Angus Grade SIS 75 : : : 16
4900A Sealing Compound PR 1431T . 17 6023 Protective Lacquer (Parts A and B) FPTIBC113 14
49O2AFiberslip B30 Laminate . . 6024 Fibredux 914 Resin Impregnated Gratil XA-S Carbon
49O3AFiberslip B4O Laminate. . . . . 9
49O4AStriplene 300 . Fibre Sheet and tape . . . 14
4907 Kilfrost ABC De-icing Compound : : ; Polyester Resin RP13 . . . 14
4909 Nebar, StandardGrade . . . . 11 Rubber Compound A 0109 16
4910A Beacon 4330 Grease . . . . Glass Fibre Insulation Batting : :
4911 Nebar, HP Grade . . . i: Polypenco Acetal Rod . . t:
4913AAero Shell Fluid 2XN . . . 12 6O30ADalfratex Silica Rooe . . . 11
4914A Rocol GG 17866Grease ’ 6031 Araldite AVlOO/H\j 100 system
49 18A PolurethaneWalkway Finishing Paint FE5OW t: 6032 Backing Board FPTIBB1803 1;:
4919B Epoxy Primer (lead-free) . . 13 6033 Tensol No 12 7
4923 Gaco SV75 15 6034 Rubber Compound 640 : : :
4925B Paint, Primer &oxide Strontium Chromate, Stoving 6035 Rubber Compound 1109 . . f ::
Ref 588AlO66and Thinners 485/0165 . 13 6036 Hardener XD716 . . . 7
4927 Scotchseal Industrial Adhesive 801 (Class BZ non: 6037 Plessey PlO Foam . 14
crazing 17 6038 Flexible Polyurethane paint (PU 66) ’
4929A Havstillite All& 52 : : : : : : : 5 6039 Filmed Glass Fibre Insulation . . :t
4931A Co&no1 25R .- la Araldite 2001 Adhesive System.
4933A Fiberslip B6O Laminate : : : : : : iE Araldite 2002 Adhesive System. . :
4939A Kilfrost W WFIMODZ . . . . . . d Araldite 2003 Adhesive System. .
4940A Coolanol35 la z: Araldite 2004 Adhesive System. . :
4943A High Heat Resisting Stokng Enamel Aluminium PL Araldite 2005 Adhesive System. . 7
101 E3746RZ 14 % Araldite 2007 Adhesive System. a
4948A Metco Nickel-Alu&ium Wire ‘405~NS (Flame 6048 Ferobestos. . LFlO,
^. LF103, LF1037 :
Spraying) 5 6050 Dynactyltc sheet lb
4949A. Metco Nickel~Alu&ium 6051 Sealing Compounds2230 ‘and2232 with prhner’M662
. spmyiiigJ .. . Powder ‘450&S (Flame _- -6O52A A~rah-liteLY 1927 GB ‘and Hii&-IIY 1929‘GB. .
;; -
4950A Metco ISC-NS Powder (Flame’Soravine) : : : : 6053 Paint SystemsElastomeric Polyurethane (two-part) . 14
4951A Metco 12F-NS Powder (Flame Spra$t~j 6 6054 Wellseal RS 2965 Non-Flammable Engine Jointing
4953B Triplex Ten-Twenty Glass 10 Compound ...TI. . -. 11
4954 Silane Primer 9281 for polysulphide’sealams : : 17 6055 Fire Sleeve AE 102 (FG). . . .
4958 Deva Metal Sintered Bearing Material Ref BL 4/6 . 4 6056 Chemglaze ::
4959A Dry Film Lubricant PL94 (Formula E3699) 12 6057 Arma G-213 (Formula 213180)‘Grease : : : 12
4961 Self Adhesive Emblems and Markings, Scotch&l 6059 Surface Treatment of Ferrous Parts-using the Tuff-
Film No 4690 with Edge Sealer . tride TFl, TFllABl Process. . . . 19
4962A Adhesive SlOO5system . . . f 6O6OALoctite 648 and Activator TCA. . . . a
4964A Fiberslip B70 Laminate . . . . 6061 Epikote 815 Resin . . . . . . .
4966B Hydrotype 1842B 1: 6O62AArdrox 1074 :;
4%7 Protective Lacquer &T/N27 : : : : : 14 6064 Paint Scheme,‘Erosion Resistant Co&inn iERCj two:
4%8A Paint Remover Heavy Duty, Hot Bath Ardrox 26HT. 9 pack Gloss,.Semi-Matt or Matt - . 14
4969 Self Adhesive Emblems and Markings, Scotchcal 6065 Anti-seize compound for use on components‘in air
Film No 3650 with Edge Sealer . . . . turbines 12
4970 Durasint Grade S73. t 6067 Paint Finishing, Flexible, Defence’ equipment IRR
4971 Mastinex Jointing Compound AF5/34A (5982N3010): Near-Matt, two-pack, NATO Green
4972 Rocol MV -4 . t: Sermetel Process(5375, 5380, 1141.2241,2242) : :i
4973 Araldite SV4O9and Polyamide’140 : : : : iE Niflor Coating Process . . . . . 19
4974A Araldite MY750 Hardener HT 972 . 711: 6070 Glasscloth Reinforced, Polymethyl-methacrylate Resin
4976 Rain Erosion System F231-949/F21O-747with Primer Laminate 15
F2924(GRP) and F580-2OlO/F580-2OO9 (Metals) . 6071 Polyethelene Terephtbalate ‘Fabric Reinforced,’ Poly:
4979 Rubber Material IM 1452 . . . . . :i methyl-methacrylate Resin Laminate . . . 15
4980 RocolGreaseMX-44 . . . . . . 12 6072 Transparent Polyurethane Film Tape, Scotch Tapes
4981A Aviation oil S835O . 12 Nos 8561, 8591 . . . . . a
4982 Nebar, Jointing Material LRC 631 : : : : 6073 PL 239 (Formula 3862 x 9010) Dry Film Lubricant. 12
4986B Bristol Armour Grade 86F . . t: 6074 E32 Stntctural Epoxy Adhesive (two-part) . .. a
21
D.T.D. 900 AA
APPENDIX IV-cmtinued
Approval Material and/or Process Page Approval Material and/or Process Page
- -No. No.
6075 SiliiTz Sealant RTV 106, Primers Ss4004 6097 LoctiteActivatorsNandTCA. . . . .
17 6098 Raychem Adhesive S1125 . . . . . :
6076 Silicone Adhesive S&ant’RTV’ 159 : : : : 17 6100 Hoybide Tungsten Carbides . . . . .
6077 SWAM, Type 908/1/06209/ooO . . . . 6101 PlanseeTungsten Carbides t
6079 Rocol Fomblin YR Fluid . f4 6102A PermabondFlexon 241 with Initiator No I : : 8
6080 Row1 Fomblin OK?0 Grease : 1 : : : 12 6103 Assigned-not agreed at time ofprint . . .
6081 Rocol Fomblin RT15 Grease . . . . . 12 6104 Assigned-not agreed at time of print
6082 El1 Epoxy Adhesive a 6105 Stag PolymersDoubleBond Putty and Cream : : 18
~4084 Smtered Ceramic Materials, Sit& Hylut&a 1 1 10 6106 F~Stq&lm 2ooo. -
6086A Alloy and Pure Metal Powders, applied by De&a- 6107 Stag Polytirers &l ‘Sealants Casting Compound RS
tion Gun LW-1, LW-lB, LW-5. LW-15, LC-I-llm 2958 Parts A and B 12
K;-$ LC-l-25, LC-1-H. LDT-400 and 6108 FasCal 6200 FluorescentVinyl’Film: : : :
19 6109 FasCal 900 Vinyl Marking Film . . . . ;
6087A Alloy ,,kd Pure Metal Powders, applied’ by Plasma 6110
Pmce&LCN-1, LCN-2, LN-2: LtX and LW-11B 19 6111 ‘Assigned-notagreed at time of print ’ ’ ’ ‘-
6088 EO 4 Toughened Epoxide Adhestve (two-part) . a 6112
6092A Polysulphide Sealant PR 1750 ClassesA, B and C : 17 6113 I
6093 ESP 110, Epoxy Adhesive, Single Part . a
6095 Chemlok 236A Bonding Agent and Chemlok 205
Primer. . . . . . . . . a
HMSO
BOOKS
© Crown copyright 1989
First published 1989
HMSO Bookshops
49 High Holborn, London, WC1V 6HB 01-873 0011 (Counter service only)
258 Broad Street, Birmingham, B1 2HE 021-643 3740
Southey House, 33 Wine Street, Bristol, BS1 2BQ (0272) 264306
9-21 Princess Street, Manchester, M60 8AS 061-834 7201
80 Chichester Street, Belfast, BT1 4JY (0232) 238451
71 Lothian Road, Edinburgh, EH3 9AZ 031-228 4181
£2.80 net
ISBN 0 11 772621 4