You are on page 1of 2

4K/UHD 4-Output HDMI to

HDBaseT Distribution Amplifier


AT-UHD-CAT-4

The Atlona AT-UHD-CAT-4 is a 4K/UHD HDMI to HDBaseT™ distribution amplifier featuring pass-through
HDMI input connections, four HDBaseT outputs and display control capability. Each output transmits AV
and control signals up to 230 ft. (70 m) @ 1080p and 130 ft. (40 m) @ 4K/UHD. Features include 4K/UHD
@ 60 Hz with 4:2:0 color subsampling, HDCP 2.2 compliance, EDID management, and PoE for powering
remote receivers. A wide variety of consumer and commercial displays may be controlled by the AT-UHD-
CAT-4 using CEC, IR, or RS-232. Designed for commercial distribution applications, the AT-UHD-CAT-4
is control system-friendly and integrates with any TCP/IP, RS-232, or IR control system and features a 1U,
half-rack width enclosure with external, international power supply. Compatible Atlona receiver: AT-UHD-
EX-70C-RX.
Signal distribution applications increasingly require compatibility with HDCP 2.2, 4K/UHD @ 60 Hz support
with 4:2:0 color subsampling to ensure images reach displays with compatible copy protection and with
the pristine digital image quality of the original signal, without artifacts resulting from inferior image
distribution systems. HDBaseT distribution ensures reliable, long-distance transmission of high resolution
audio and video signals. These core features along with added display control provide additional flexibility.
Power over Ethernet not only provides compatibility with Atlona Extender products but enables HDBaseT
Certification.

Four HDBaseT outputs with transmission of AV and HDMI distribution amplifier with built-in HDBaseT
control signals and PoE - transmission -
• Long distance, 230 foot (70 m) outputs offer • Combines signal distribution and long distance
bidirectional extension of both RS-232 and IR transmission into a single enclosure; eliminates
control plus remote receiver power several devices and power supplies
Compatible Atlona receiver: AT-UHD-EX-70C-RX • Reduces overall system costs, speeds installation,
• Reduces multiple, separate cable runs down to and prevents compatibility issues
a single category cable per display, shrinking cable 4K/UHD capability with HDCP 2.2 copy protection -
bundles and required conduit capacity to reduce • Compatible with ultra-high definition sources and
cost of installation displays; adheres to latest content protection
Display control - specification
• CEC, IR or RS-232 control signals transmitted over • Ensures AV distribution systems are ready for 4K/
HDBaseT UHD streaming services and playback devices
• Enables control of a wide variety of displays
including commercial or low-cost consumer displays

70 Daggett Road, San Jose, CA 95134


US Toll-free: +1.408.962.0515, International: +41.43.508.4321 atlona.com
©Atlona 2003-2016
4K/UHD 4-Output HDMI to
HDBaseT Distribution Amplifier
AT-UHD-CAT-4

Specifications
Video Resolutions
Video 4096x2160@24/25/30/50*/60Hz*, 3840x2160@24/25/30/50*/60Hz* (UHD), 2048x1080p,
1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p,
576i, 480p, 480i
VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050, 1600x1200, 1600x900, 1440x900,
1400x1050, 1366x768, 1360x768, 1280x1024, 1280x800, 1280x768, 1152x768, 1024x768, 800x600,
640x480
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
Audio
Analog IN PCM 2Ch (de-embedded)
HDMI PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD,
DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 35 meters up to 115 feet
CAT6a/7 @ 4K up to 40 meters up to 130 feet
CAT5e/6 @ 1080p up to 60 meters up to 197 feet
CAT6a/7 @ 1080p up to 70 meters up to 230 feet
HDMI IN/OUT@ 4K up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Signal
Bandwidth 10.2 Gbps
CEC Compliant
HDCP Compliant 2.2
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Power
Consumption 52.8W
Idle Consumption 12.54W
Supply Input: AC100-240V ~ 50/60Hz
Output: DC 48V/3.125A
Dimension
H x W x D 44 x 222.25 x 261 (mm) 1.73 x 8.75 x 10.28 (inch)
Rack Unit 1/2 rack, 1RU
Weight
Device 1.66 kg 3.70 lbs
Certification
Unit CE, FCC
Power Supply CE, FCC, Level VI, RoHS, cULus, RCM, CCC
*4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only Video
Control System
AT-UHD-EX-70C-RX
POWER
HDBaseT
HDMI HDBaseT LOCK
1 2 3 4
INT LEARN
FW LINK
Control
ZIGBEE 12V DC FACTORY ID 1 3 5 HDMI COMPONENT WIFI 1 DIGITAL eSATA RX TX P S S
COM

COM

COM

COM
NC
NO

NC
NO

NC
NO

NC
NO

RESTORE COAX OUT


IN OUT 1 2 3 4
L RELAYS
WIFI 2
SERIAL 1
R
2 4 6

AUDIO IN CONTACTS
+12V
SIG
GND
+12V
SIG
GND
+12V
SIG
GND
+12V
SIG
GND

IR OUT VIDEO OUT AUDIO OUT ETHERNET


SERIAL 2 RS-232 IR IN IR OUT HDBaseT IN HDMI OUT

AT-UHD-EX-70C-RX
AT-UHD-EX-70C-RX
POWER
AT-UHD-CAT-4 POWER EDID

MASTER 1 2 3 4 FW
FW LINK
RS-232 IR RS-232 IR RS-232 IR RS-232 IR RS-232 IR

RX TX P S S

LAN RX TX TX RX RX TX TX RX RX TX TX RX RX TX TX RX RX TX TX RX
RS-232 IR IN IR OUT HDBaseT IN HDMI OUT

AT-UHD-EX-70C-RX
AT-UHD-EX-70C-RX
POWER
IN OUT 1 2 3 4
HDMI HDBaseT OUT DC 48V

AT-UHD-CAT-4 FW LINK

RX TX P S S

RS-232 IR IN IR OUT HDBaseT IN HDMI OUT

AT-UHD-EX-70C-RX
AT-UHD-EX-70C-RX
POWER
HDMI 1 POWER INPUT

HDMI 2

HDMI 3

HDMI 4
FW LINK
HDMI 5
VOLUME
AT-UHD-SW-52

AT-UHD-SW-52 L
AUDIO
R RS-232
RX TX P S S

- + + - S/PDIF OUT RX TX
RS-232 IR IN IR OUT HDBaseT IN HDMI OUT

AT-UHD-EX-70C-RX
- +

1 2 3 4 5 1 2

Specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown
HDMI IN HDMI OUT FW LAN DC 5V

here. Not responsible for typographical errors.

70 Daggett Road, San Jose, CA 95134


US Toll-free: +1.408.962.0515, International: +41.43.508.4321 atlona.com
©Atlona 2003-2016

You might also like