You are on page 1of 28

SPAN 7

Girder System : Analysis Output : Reactions - Girder 1


Wed Apr 29 11:05:41 2020

Girder 1 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 1 56.55 9.95 0.00 76.09 -8.64 0.00 0.00

Steel 23.40
Concrete 33.15

Global x concurrent LL+I rot. 0.0068 0.0026 deg


Global y concurrent LL+I rot. 0.0074 0.0025 deg

Max Live per Lane


1 2 3 4
63.41 7.09 0.00 0.00

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 2 - 47.3 7.41

Concurrent at gdr 3 - 14.3 15.58

Concurrent at gdr 4 - 5.6 11.41

Concurrent at gdr 5 - 0.0 5.27

Concurrent at gdr 6 - 1.6 4.12

Concurrent at gdr 7 - -1.0 8.72

2 24 58.16 8.93 0.00 59.77 -0.47 0.00 0.00

Steel 23.24
Concrete 34.92

Global x concurrent LL+I rot. -0.0024 0.0000 deg


Global y concurrent LL+I rot. -0.0056 0.0002 deg

Max Live per Lane


1 2 3 4
49.81 6.68 1.36 0.00

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 2 - 81.6 0.10


Concurrent at gdr 3 - 18.2 0.20

Concurrent at gdr 4 - 3.2 0.60

Concurrent at gdr 5 - -0.4 1.75

Concurrent at gdr 6 - -0.5 4.27

Concurrent at gdr 7 - -0.5 6.92

Single Des. Trk+Lane

1 1 76.09 -9.80
2 24 59.77 -0.47

Tandem+Lane

1 1 61.23 -8.13
2 24 49.42 -0.25

Single Des. Trk

1 1 50.71 -6.64
2 24 41.08 -0.30

Single Tandem

1 1 35.85 -4.98
2 24 30.72 -0.08

Lane

1 1 25.38 -3.16
2 24 18.70 -0.17

Fatigue Truck

1 1 35.67 -3.59
2 24 26.78 -0.06

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 1 -0.21 0.22 -0.02 0.02 ( 0.00 to 0.11) ( 0.00 to 0.11)


2 24 0.42 -0.22 0.05 -0.02 (-0.21 to 0.00) (-0.11 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 1 -0.21 0.22 -0.02 0.02 ( 0.00 to 0.11) ( 0.00 to 0.11)


Concurrent live vertical reaction -1.18 40.02 -1.18 40.02

2 24 0.42 -0.22 0.05 -0.02 (-0.21 to 0.00) (-0.11 to 0.00)


Concurrent live vertical reaction 26.11 -0.07 26.11 -0.07

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder System : Analysis Output : Reactions - Girder 2
Wed Apr 29 11:05:49 2020

Girder 2 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 2 70.35 9.12 0.00 90.57 -1.92 0.00 0.00

Steel 22.87
Concrete 47.48

Global x concurrent LL+I rot. 0.0099 0.0031 deg


Global y concurrent LL+I rot. 0.0126 0.0002 deg

Max Live per Lane


1 2 3 4
53.89 36.68 12.46 0.78

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - 48.4 0.00

Concurrent at gdr 3 - 48.0 -0.54

Concurrent at gdr 4 - 21.8 1.85

Concurrent at gdr 5 - 2.6 4.34

Concurrent at gdr 6 - 6.2 3.17

Concurrent at gdr 7 - -2.0 11.34

2 39 67.11 9.25 0.00 73.73 -0.12 0.00 0.00

Steel 22.99
Concrete 44.12

Global x concurrent LL+I rot. -0.0005 0.0000 deg


Global y concurrent LL+I rot. -0.0062 0.0002 deg

Max Live per Lane


1 2 3 4
61.44 11.34 2.67 0.54

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - 34.4 0.00


Concurrent at gdr 3 - 35.9 0.20

Concurrent at gdr 4 - 6.7 0.60

Concurrent at gdr 5 - 0.1 1.75

Concurrent at gdr 6 - -0.6 4.27

Concurrent at gdr 7 - -0.7 6.92

Single Des. Trk+Lane

1 2 90.57 -1.92
2 39 73.73 -0.12

Tandem+Lane

1 2 74.88 -0.68
2 39 61.99 -0.03

Single Des. Trk

1 2 67.70 -1.27
2 39 54.77 -0.09

Single Tandem

1 2 51.83 -0.03
2 39 42.25 0.00

Lane

1 2 23.05 -0.65
2 39 19.74 -0.03

Fatigue Truck

1 2 30.46 -0.02
2 39 33.14 0.00

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 2 -0.23 0.24 -0.02 0.02 ( 0.00 to 0.09) ( 0.00 to 0.10)


2 39 0.45 -0.24 0.04 -0.02 (-0.18 to 0.00) (-0.09 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 2 -0.23 0.24 -0.02 0.02 ( 0.00 to 0.09) ( 0.00 to 0.10)


Concurrent live vertical reaction 0.00 35.13 0.00 34.90

2 39 0.45 -0.24 0.04 -0.02 (-0.18 to 0.00) (-0.09 to 0.00)


Concurrent live vertical reaction 35.80 0.00 35.80 0.00

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder System : Analysis Output : Reactions - Girder 3
Wed Apr 29 11:05:56 2020

Girder 3 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 3 61.71 7.67 0.00 81.14 -2.71 0.00 0.00

Steel 14.89
Concrete 46.81

Global x concurrent LL+I rot. 0.0071 0.0037 deg


Global y concurrent LL+I rot. 0.0070 0.0009 deg

Max Live per Lane


1 2 3 4
33.53 47.61 11.54 0.00

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - 20.7 0.00

Concurrent at gdr 2 - 87.7 -0.04

Concurrent at gdr 4 - 42.7 1.85

Concurrent at gdr 5 - 3.8 6.43

Concurrent at gdr 6 - 5.9 5.38

Concurrent at gdr 7 - 0.6 7.01

2 51 50.21 6.93 0.00 84.24 0.00 0.00 0.00

Steel 12.31
Concrete 37.89

Global x concurrent LL+I rot. -0.0176 0.0000 deg


Global y concurrent LL+I rot. -0.0092 0.0004 deg

Max Live per Lane


1 2 3 4
45.22 39.03 3.01 0.68

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - 18.2 0.00


Concurrent at gdr 2 - 46.9 0.16

Concurrent at gdr 4 - 80.7 1.01

Concurrent at gdr 5 - 13.0 2.91

Concurrent at gdr 6 - 2.6 7.12

Concurrent at gdr 7 - -1.1 11.53

Single Des. Trk+Lane

1 3 81.14 -2.71
2 51 84.24 0.00

Tandem+Lane

1 3 67.60 -1.74
2 51 69.55 0.00

Single Des. Trk

1 3 62.73 -1.76
2 51 64.88 0.00

Single Tandem

1 3 49.01 -0.79
2 51 50.19 0.00

Lane

1 3 18.60 -0.95
2 51 19.36 0.00

Fatigue Truck

1 3 26.48 -0.71
2 51 24.48 0.00

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 3 -0.29 0.30 -0.02 0.02 ( 0.00 to 0.09) ( 0.00 to 0.10)


2 51 0.55 -0.29 0.04 -0.02 (-0.17 to 0.00) (-0.09 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 3 -0.29 0.30 -0.02 0.02 ( 0.00 to 0.09) ( 0.00 to 0.10)


Concurrent live vertical reaction 0.00 29.77 0.00 29.77

2 51 0.55 -0.29 0.04 -0.02 (-0.17 to 0.00) (-0.09 to 0.00)


Concurrent live vertical reaction 31.09 0.00 31.09 0.00

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder System : Analysis Output : Reactions - Girder 4
Wed Apr 29 11:06:05 2020

Girder 4 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 4 51.88 7.05 0.00 95.49 -5.64 0.00 0.00

Steel 12.47
Concrete 39.40

Global x concurrent LL+I rot. 0.0102 0.0045 deg


Global y concurrent LL+I rot. 0.0069 0.0025 deg

Max Live per Lane


1 2 3 4
7.21 48.42 47.07 9.18

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - -2.0 0.00

Concurrent at gdr 2 - 22.7 0.02

Concurrent at gdr 3 - 62.9 -0.54

Concurrent at gdr 5 - 37.2 10.66

Concurrent at gdr 6 - 12.0 13.43

Concurrent at gdr 7 - 4.7 8.29

2 58 51.82 6.99 0.00 91.96 0.00 0.00 0.00

Steel 12.66
Concrete 39.16

Global x concurrent LL+I rot. -0.0152 0.0000 deg


Global y concurrent LL+I rot. -0.0079 0.0008 deg

Max Live per Lane


1 2 3 4
11.30 61.16 30.80 2.52

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - 3.9 0.00


Concurrent at gdr 2 - 8.4 0.16

Concurrent at gdr 3 - 26.8 0.33

Concurrent at gdr 5 - 91.0 2.91

Concurrent at gdr 6 - 17.7 7.12

Concurrent at gdr 7 - 1.3 11.53

Single Des. Trk+Lane

1 4 95.49 -5.64
2 58 91.96 0.00

Tandem+Lane

1 4 78.53 -1.89
2 58 75.65 0.00

Single Des. Trk

1 4 74.81 -4.11
2 58 72.26 0.00

Single Tandem

1 4 57.85 -0.36
2 58 55.95 0.00

Lane

1 4 20.68 -1.53
2 58 19.70 0.00

Fatigue Truck

1 4 27.80 -0.40
2 58 33.75 0.00

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 4 -0.20 0.21 -0.01 0.02 ( 0.00 to 0.08) ( 0.00 to 0.08)


2 58 0.45 -0.23 0.03 -0.02 (-0.17 to 0.00) (-0.09 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 4 -0.20 0.21 -0.01 0.02 ( 0.00 to 0.08) ( 0.00 to 0.08)


Concurrent live vertical reaction 0.00 38.19 0.00 39.29

2 58 0.45 -0.23 0.03 -0.02 (-0.17 to 0.00) (-0.09 to 0.00)


Concurrent live vertical reaction 41.65 0.00 41.65 0.00

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder System : Analysis Output : Reactions - Girder 5
Wed Apr 29 11:06:11 2020

Girder 5 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 5 25.83 5.10 0.00 87.08 -0.11 0.00 0.00

Steel 5.90
Concrete 19.93

Global x concurrent LL+I rot. 0.0088 0.0010 deg


Global y concurrent LL+I rot. 0.0094 0.0009 deg

Max Live per Lane


1 2 3 4
0.32 3.77 55.98 31.10

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - -1.6 9.67

Concurrent at gdr 2 - 4.3 12.98

Concurrent at gdr 3 - 4.0 7.29

Concurrent at gdr 4 - 39.2 -0.45

Concurrent at gdr 6 - 50.4 13.43

Concurrent at gdr 7 - 30.0 8.29

2 64 44.32 6.75 0.00 87.30 -2.10 0.00 0.00

Steel 10.56
Concrete 33.76

Global x concurrent LL+I rot. -0.0234 -0.0046 deg


Global y concurrent LL+I rot. -0.0120 -0.0022 deg

Max Live per Lane


1 2 3 4
1.83 22.17 65.13 13.69

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - 5.5 2.03


Concurrent at gdr 2 - 8.2 2.32

Concurrent at gdr 3 - 13.4 1.30

Concurrent at gdr 4 - 45.1 0.85

Concurrent at gdr 6 - 35.7 4.27

Concurrent at gdr 7 - 2.5 6.92

Single Des. Trk+Lane

1 5 87.08 -0.11
2 64 87.30 -2.10

Tandem+Lane

1 5 71.75 -0.08
2 64 71.39 -0.57

Single Des. Trk

1 5 70.05 -0.08
2 64 68.27 -1.63

Single Tandem

1 5 54.71 -0.05
2 64 52.14 -0.10

Lane

1 5 17.04 -0.02
2 64 19.25 -0.47

Fatigue Truck

1 5 31.51 -0.04
2 64 35.06 -0.11

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 5 -0.16 0.16 -0.01 0.01 ( 0.00 to 0.07) ( 0.00 to 0.08)


2 64 0.34 -0.18 0.03 -0.01 (-0.15 to 0.00) (-0.08 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 5 -0.16 0.16 -0.01 0.01 ( 0.00 to 0.07) ( 0.00 to 0.08)


Concurrent live vertical reaction 0.00 37.54 0.00 41.55

2 64 0.34 -0.18 0.03 -0.01 (-0.15 to 0.00) (-0.08 to 0.00)


Concurrent live vertical reaction 46.82 0.00 46.00 0.00

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder System : Analysis Output : Reactions - Girder 6
Wed Apr 29 11:06:17 2020

Girder 6 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 6 40.77 6.12 0.00 79.88 0.00 0.00 0.00

Steel 9.37
Concrete 31.40

Global x concurrent LL+I rot. 0.0056 0.0020 deg


Global y concurrent LL+I rot. 0.0058 0.0018 deg

Max Live per Lane


1 2 3 4
3.09 6.28 33.66 46.22

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - -1.0 16.12

Concurrent at gdr 2 - 1.5 21.63

Concurrent at gdr 3 - 0.4 12.15

Concurrent at gdr 4 - 10.3 -0.75

Concurrent at gdr 5 - 77.0 17.77

Concurrent at gdr 7 - 55.9 13.81

2 69 39.53 6.38 0.00 90.27 -3.38 0.00 0.00

Steel 9.33
Concrete 30.20

Global x concurrent LL+I rot. -0.0141 -0.0025 deg


Global y concurrent LL+I rot. -0.0073 -0.0013 deg

Max Live per Lane


1 2 3 4
0.04 13.75 51.57 38.70

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - -1.9 0.96


Concurrent at gdr 2 - 3.7 7.22

Concurrent at gdr 3 - 1.8 0.33

Concurrent at gdr 4 - 5.2 0.64

Concurrent at gdr 5 - 32.8 -0.13

Concurrent at gdr 7 - 89.6 6.92

Single Des. Trk+Lane

1 6 79.88 0.00
2 69 90.27 -3.38

Tandem+Lane

1 6 68.49 0.00
2 69 76.53 -1.41

Single Des. Trk

1 6 63.92 0.00
2 69 71.02 -2.39

Single Tandem

1 6 52.53 0.00
2 69 56.90 -0.43

Lane

1 6 15.96 0.00
2 69 19.62 -0.98

Fatigue Truck

1 6 28.61 0.00
2 69 28.61 -0.49

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 6 -0.14 0.14 -0.01 0.01 ( 0.00 to 0.07) ( 0.00 to 0.07)


2 69 0.27 -0.14 0.02 -0.01 (-0.14 to 0.00) (-0.08 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 6 -0.14 0.14 -0.01 0.01 ( 0.00 to 0.07) ( 0.00 to 0.07)


Concurrent live vertical reaction 0.00 39.86 0.00 39.86

2 69 0.27 -0.14 0.02 -0.01 (-0.14 to 0.00) (-0.08 to 0.00)


Concurrent live vertical reaction 47.92 0.00 47.92 0.00

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder System : Analysis Output : Reactions - Girder 7
Wed Apr 29 11:06:24 2020

Girder 7 Service Vertical Reactions - k

Supp/Node Noncomp Super- Wearing Max Min Sidewalk


Dead imposed Surface LL+I LL+I Max Min
Dead

Does not include effects from pouring.

Governing

1 7 42.90 6.34 0.00 97.09 -0.91 0.00 0.00

Steel 9.49
Concrete 33.42

Global x concurrent LL+I rot. 0.0139 -0.0003 deg


Global y concurrent LL+I rot. 0.0071 -0.0003 deg

Max Live per Lane


1 2 3 4
0.00 2.54 11.26 80.91

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - -0.2 0.96

Concurrent at gdr 2 - -0.4 13.23

Concurrent at gdr 3 - -0.4 8.29

Concurrent at gdr 4 - -2.5 -0.45

Concurrent at gdr 5 - 8.4 0.00

Concurrent at gdr 6 - 35.6 0.18

2 71 42.64 6.60 0.00 106.96 -3.99 0.00 0.00

Steel 9.27
Concrete 33.37

Global x concurrent LL+I rot. 0.0089 -0.0015 deg


Global y concurrent LL+I rot. -0.0035 -0.0002 deg

Max Live per Lane


1 2 3 4
0.00 0.08 16.84 89.13

Concurrent reactions using same governing loaded lanes


as for Max LL+I and Min LL+I

Concurrent at gdr 1 - -0.3 1.61


Concurrent at gdr 2 - -0.4 17.68

Concurrent at gdr 3 - -0.8 9.44

Concurrent at gdr 4 - 0.5 0.76

Concurrent at gdr 5 - 5.3 0.41

Concurrent at gdr 6 - 10.5 4.22

Single Des. Trk+Lane

1 7 97.09 -0.91
2 71 106.96 -3.99

Tandem+Lane

1 7 79.82 -0.48
2 71 89.74 -3.67

Single Des. Trk

1 7 76.29 -0.67
2 71 83.26 -3.12

Single Tandem

1 7 59.03 -0.23
2 71 65.42 -2.45

Lane

1 7 20.80 -0.24
2 71 24.32 -1.22

Fatigue Truck

1 7 45.65 -0.16
2 71 51.13 -1.93

(Note: the number of governing lanes for each type of loading


listed above may be different and may vary by each support)

Support Rotations - Degrees

About global axes used in Girder Geometry table

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


x-axis y-axis x-axis y-axis x-axis y-axis

1 7 -0.13 0.13 -0.01 0.01 ( 0.00 to 0.09) ( 0.00 to 0.09)


2 71 0.26 -0.13 0.02 -0.01 (-0.16 to 0.03) (-0.09 to 0.00)

Torsional and flexural rotations - member local axes

Supp/Node Noncomp Dead Comp dead+Wear LL+I+SDWK Range


tors flex tors flex tors flex

1 7 -0.13 0.13 -0.01 0.01 ( 0.00 to 0.09) ( 0.00 to 0.09)


Concurrent live vertical reaction -0.20 45.81 -0.20 41.74

2 71 0.26 -0.13 0.02 -0.01 (-0.16 to 0.03) (-0.09 to 0.00)


Concurrent live vertical reaction 51.45 78.85 51.45 -1.56

Noncomp dead end reactions do not include weight of girder extensions.


SPAN 7
Girder 1 : Rating Output : Reactions
Wed Apr 29 11:00:50 2020

Girder 1 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 71.80 12.43 0.00 133.16 -15.12 217.39 45.53


Steel 29.69
Conc 42.11

Permit Trk 95.91 0.00 180.15 59.84

124.24 73.82 11.16 0.00 104.61 -0.83 189.59 60.36


Steel 29.49
Conc 44.33

Permit Trk 79.88 0.00 164.86 60.38

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 57.44 9.95 0.00 76.09 -8.64 143.48 58.75


Steel 23.75
Conc 33.69

Permit Trk 71.05 0.00 138.43 67.39

124.24 59.06 8.93 0.00 59.77 -0.47 127.76 67.52


Steel 23.60
Conc 35.46

Permit Trk 59.17 0.00 127.15 67.99


SPAN 7
Girder 2 : Rating Output : Reactions
Wed Apr 29 11:00:59 2020

Girder 2 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 89.22 11.39 0.00 158.50 -3.35 259.11 69.09


Steel 29.03
Conc 60.19

Permit Trk 99.97 0.00 200.58 71.52

117.96 85.16 11.56 0.00 129.03 -0.06 225.75 69.58


Steel 29.18
Conc 55.99

Permit Trk 107.29 0.00 204.01 68.72

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 71.37 9.12 0.00 90.57 -1.92 171.06 78.57


Steel 23.22
Conc 48.15

Permit Trk 74.05 0.00 154.54 80.49

117.96 68.13 9.25 0.00 73.73 -0.03 151.11 77.35


Steel 23.34
Conc 44.79

Permit Trk 79.47 0.00 156.85 77.38


SPAN 7
Girder 3 : Rating Output : Reactions
Wed Apr 29 11:01:06 2020

Girder 3 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 78.34 9.59 0.00 141.99 -4.74 229.92 58.56


Steel 18.85
Conc 59.48

Permit Trk 87.31 0.00 175.24 62.44

111.20 63.96 8.66 0.00 147.42 0.00 220.04 52.29


Steel 15.63
Conc 48.33

Permit Trk 72.17 0.00 144.78 51.42

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 62.67 7.67 0.00 81.14 -2.71 151.48 67.63


Steel 15.08
Conc 47.59

Permit Trk 64.67 0.00 135.01 70.34

111.20 51.17 6.93 0.00 84.24 0.00 142.34 58.09


Steel 12.50
Conc 38.66

Permit Trk 53.46 0.00 111.55 58.09


SPAN 7
Girder 4 : Rating Output : Reactions
Wed Apr 29 11:01:14 2020

Girder 4 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 66.01 8.81 0.00 167.11 -9.87 241.94 44.00


Steel 15.82
Conc 50.19

Permit Trk 89.08 0.00 163.91 53.03

102.88 65.94 8.74 0.00 160.93 0.00 235.62 53.77


Steel 16.06
Conc 49.88

Permit Trk 110.39 0.00 185.07 52.93

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 52.81 7.05 0.00 95.49 -5.64 155.35 54.22


Steel 12.66
Conc 40.15

Permit Trk 65.99 0.00 125.85 59.86

102.88 52.75 6.99 0.00 91.96 0.00 151.71 59.75


Steel 12.85
Conc 39.90

Permit Trk 81.77 0.00 141.52 59.75


SPAN 7
Girder 5 : Rating Output : Reactions
Wed Apr 29 11:01:20 2020

Girder 5 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 33.46 6.38 0.00 152.39 -0.13 192.23 28.55


Steel 7.61
Conc 25.85

Permit Trk 105.29 0.00 145.12 27.84

94.56 56.57 8.44 0.00 152.77 -3.67 217.78 43.13


Steel 13.44
Conc 43.13

Permit Trk 118.34 0.00 183.35 45.96

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 26.76 5.10 0.00 87.08 -0.08 118.95 31.79


Steel 6.09
Conc 20.68

Permit Trk 77.99 0.00 109.86 31.87

94.56 45.25 6.75 0.00 87.30 -2.10 139.30 49.90


Steel 10.75
Conc 34.50

Permit Trk 87.66 0.00 139.66 52.00


SPAN 7
Girder 6 : Rating Output : Reactions
Wed Apr 29 11:01:30 2020

Girder 6 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 52.13 7.65 0.00 139.78 0.00 199.57 43.04


Steel 11.95
Conc 40.18

Permit Trk 86.33 0.00 146.11 42.20

86.24 50.58 7.97 0.00 157.98 -5.91 216.53 36.24


Steel 11.90
Conc 38.68

Permit Trk 73.41 0.00 131.96 41.31

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 41.71 6.12 0.00 79.88 0.00 127.70 47.83


Steel 9.56
Conc 32.14

Permit Trk 63.95 0.00 111.77 47.83

86.24 40.46 6.38 0.00 90.27 -3.38 137.11 43.46


Steel 9.52
Conc 30.94

Permit Trk 54.38 0.00 101.22 46.84


SPAN 7
Girder 7 : Rating Output : Reactions
Wed Apr 29 11:01:38 2020

Girder 7 Factored Reactions - HL93 or Prmt - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total
Includes ductility, redundancy, and operational factors.

0.00 54.76 7.92 0.00 169.90 -1.60 232.58 43.53


Steel 12.10
Conc 42.66

Permit Trk 146.01 0.00 208.69 44.32

77.92 54.43 8.25 0.00 187.18 -6.98 249.86 38.15


Steel 11.83
Conc 42.60

Permit Trk 159.75 0.00 222.44 44.32

See 3.4.1 commentary for min total calcs

Noncomposite dead reaction does not include the effect


of incremental pouring.

Note: DC1 reactions at end supports in girder output account


for the additional weight of the extension of the girder past
the end bearing locations, based on GDREXT girder input
(which defaults to 1.0 ft if not specified).

Unfactored Reactions - k

Location DC1 DC2 DW LL+I LL+I Max Min


Max Min Total Total

0.00 43.81 6.34 0.00 97.09 -0.91 147.23 49.23


Steel 9.68
Conc 34.13

Permit Trk 108.16 0.00 158.30 50.14

77.92 43.54 6.60 0.00 106.96 -3.99 157.11 46.16


Steel 9.46
Conc 34.08

Permit Trk 118.34 0.00 168.48 50.15

You might also like