Professional Documents
Culture Documents
74ls83 (4-Bit Binary Adders With Fast Carry) 3
74ls83 (4-Bit Binary Adders With Fast Carry) 3
May 1989
54LS83A/DM54LS83A/DM74LS83A
4-Bit Binary Adders with Fast Carry
General Description Features
These full adders perform the addition of two 4-bit binary Y Full-carry look-ahead across the four bits
numbers. The sum (R) outputs are provided for each bit and Y Systems achieve partial look-ahead performance with
the resultant carry (C4) is obtained from the fourth bit. the economy of ripple carry
These adders feature full internal look ahead across all four Y Typical add times
bits. This provides the system designer with partial look- Two 8-bit words 25 ns
ahead performance at the economy and reduced package Two 16-bit words 45 ns
count of a ripple-carry implementation. Y Typical power dissipation per 4-bit adder 95 mW
The adder logic, including the carry, is implemented in its Y Alternate Military/Aerospace device (54LS83A) is avail-
true form meaning that the end-around carry can be accom- able. Contact a National Semiconductor Sales Office/
plished without the need for logic or level inversion. Distributor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/6378 – 1
Order Number 54LS83ADMQB, 54LS83AFMQB,
DM54LS83AJ, DM54LS83AW, DM74LS83AWM or DM74LS83AN
See NS Package Number J16A, M16B, N16E or W16A
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Typ
Symbol Parameter Conditions Min Max Units
(Note 1)
VI Input Clamp Voltage VCC e Min, II e b18 mA b 1.5 V
VOH High Level Output VCC e Min, IOH e Max DM54 2.5 3.4
V
Voltage VIL e Max, VIH e Min
DM74 2.7 3.4
VOL Low Level Output VCC e Min, IOL e Max DM54 0.25 0.4
Voltage VIL e Max, VIH e Min
DM74 0.35 0.5 V
IOL e 4 mA, VCC e Min DM74 0.25 0.4
II Input Current @ Max VCC e Max A or B 0.2
mA
Input Voltage VI e 7V
C0 0.1
IIH High Level Input VCC e Max A or B 40
mA
Current VI e 2.7V
C0 20
IIL Low Level Input VCC e Max A or B b 0.8
mA
Current VI e 0.4V
C0 b 0.4
2
Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
RL e 2 kX
From (Input)
Symbol Parameter CL e 15 pF CL e 50 pF Units
To (Output)
Min Max Min Max
tPLH Propagation Delay Time C0 to
24 28 ns
Low to High Level Output R1 or R2
tPHL Propagation Delay Time C0 to
24 30 ns
High to Low Level Output R1 or R2
tPLH Propagation Delay Time C0 to
24 28 ns
Low to High Level Output R3
tPHL Propagation Delay Time C0 to
24 30 ns
High to Low Level Output R3
tPLH Propagation Delay Time C0 to
24 28 ns
Low to High Level Output R4
tPHL Propagation Delay Time C0 to
24 30 ns
High to Low Level Output R4
tPLH Propagation Delay Time Ai, Bi
24 28 ns
Low to High Level Output to Ri
tPHL Propagation Delay Time Ai, Bi
24 30 ns
High to Low Level Output to Ri
tPLH Propagation Delay Time C0 to
17 24 ns
Low to High Level Output C4
tPHL Propagation Delay Time C0 to
17 25 ns
High to Low Level Output C4
tPLH Propagation Delay Time Ai, Bi
17 24 ns
Low to High Level Output to C4
tPHL Propagation Delay Time Ai, Bi
17 26 ns
High to Low Level Output to C4
Truth Table
3
Logic Diagram
TL/F/6378 – 2
4
5
Physical Dimensions inches (millimeters)
6
Physical Dimensions inches (millimeters) (Continued)
7
54LS83A/DM54LS83A/DM74LS83A 4-Bit Binary Adders with Fast Carry
Physical Dimensions inches (millimeters) (Continued)
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
This datasheet has been download from:
www.datasheetcatalog.com