Professional Documents
Culture Documents
User Manual
Thank you for your use. In order to enable you to operate this product safely and fully understand its functions and
uses, please read this manual in detail before use.
Please remove the plastic film which is pasted on the charging point for your first use, and put the earbuds into the
charging case for charging!.
Charging
1. For first time use (or no use for long time ), please be sure to put the headset in the charging box. Connect the USB
charging cable to charge for about one hour, and the charging box will flash red, light blue and turn off after it is full.
In the charging state of the headset, the red LED Iight vil be on, the red LED light will be off when the battery full.
2. The charging box contains a high performance lithium battery, which can be used to charge the headset when it is
charged.
3. This product can be used to charge the charging box by plugging the charging cable into the phone power adapter or
the standard USB interface on other devices (adapter specification output voltage DC5V, 500 current).
Wearing headphones
Please choose the most suitable earplug among the different sizes we provide. When the earplug is completely close to
the earphone, the earphone can get the best sound quality, so that you can enjoy music better
Remove the two earphones from the charging box and use then directly (then eerphone is removed from the charging
box, it will be power on, connect and enter pairing mode automatically).
Or, long press the function button for 1 second, the blue light shining 2 times into the matching state, red and blue
lights flashing alternately, and enter TWS matching mode, headphones around automaticaly matching (we had
headphones matched before delivery ), after the success of the matching host alternating red and blue flashing, vice
machine blue lights flash, then the earphones is matching successfully, there is matched prompt sound, then please
open the mobile phone bluetooth, search matching name V11, and connect, then you will hear the prompt about the
connection is successful, then you can enjoy your music.
Master-slave switch
When the earphone is connected to the phone, put the host into the charging box to charge. Then, the secondary
earphone will autonatically switch to the host, and the earphone won' t be disconnected. The earphone is taken out
from the charging box will automatically start up and be connected back.
User uses it for the second time, earphones into the charging box, the earbuds enter the charging state (the earphone
indicator light is red). After 2-3s, then take out the earphones , the blue light of the earphone slowly flashes.
The main and secondary headphones are automaticallly switched on and paired.
When the headset is turned on but not connected to bluetooth, it will automatically shut down after 3 minutes, put the
headset into the charging box to enter the charging state, the headset will also shut down automatically, or manually
press the function button of any headset for 3 seconds to shut down.
When the battery of the earphone is less than 10%, there will be a low power prompt sound, and it will automatically
shut down after three times. Then, the earphone should be charged on time.
Call answer/hang up /refuse /call back/Siri/Play/Pause/Music Up and Down
Use cel phone connection, when there is a call, incoming calls will be prompted sound and broadcast incoming
telephone number.
1. Press any earphone function button to answer the phone.
2. Press the function button to hang up the phone.
3. Long press the earphone function button for 2 seconds to reject the incoming call.
4. Press the function button three times to enable the mobile phone to redial the first phone number recently dialed.
5. Long press the function button for 1 second to enter Siri in the non-phone state, and short press for exiting.
6. In the state of music, presss the function button for pause, and then, press the function button for play. double-click
the function button on the right earphone to play the next song, and double-click the function button on the left
earphone to play the last song.
Specification parameters
Manual do Usuário
Obrigado pelo seu uso. Para permitir que você opere este produto com segurança e compreenda completamente suas
funções e usos, leia este manual em detalhes antes de usar.
Remova o filme plástico colado no ponto de carregamento para o seu primeiro uso e coloque os fones de ouvido no
estojo de carregamento para carregar!
Carregando
1. Para o uso inicial (ou não utilizado por muito tempo), coloque o fone de ouvido na caixa de carregamento. Conecte
o cabo de carregamento USB para carregar por cerca de uma hora, e a caixa de carregamento piscará em vermelho,
azul claro e desligará depois que estiver cheia. No estado de carregamento do fone de ouvido, o LED vermelho
acenderá e o LED vermelho apagará quando a bateria estiver cheia.
2. A caixa de carregamento contém uma bateria de lítio de alto desempenho, que pode ser usada para carregar o fone
de ouvido quando estiver carregado.
3. Este produto pode ser usado para carregar a caixa de carregamento, conectando o cabo de carregamento ao
adaptador de energia do telefone ou à interface USB padrão em outros dispositivos (tensão de saída de especificação
do adaptador DC5V, corrente 500).
Por favor, escolha o tampão mais adequado entre os diferentes tamanhos que fornecemos. Quando o tampão está
completamente próximo ao fone de ouvido, ele pode obter a melhor qualidade de som, para que você possa ouvir
melhor a música.
Remova os dois fones de ouvido da caixa de carregamento e use-os diretamente (quando o fone de ouvido é removido
da caixa de carregamento, ele liga, conecta e entra automaticamente no modo de emparelhamento).
Ou pressione e segure o botão de função por 1 segundo, a luz azul brilha duas vezes no estado correspondente, as
luzes vermelha e azul piscam alternadamente e entra no modo de correspondência do TWS, fones de ouvido em
correspondência automática (tivemos fones de ouvido combinados antes da entrega), após o sucesso do host
correspondente alternando o piscar vermelho e azul, as luzes azuis da vice-máquina piscam e, em seguida, os fones de
ouvido estão combinando com êxito, há um som imediato correspondente, abra o bluetooth do telefone móvel,
pesquise o nome correspondente V11, e conecte-se, e ouvirá conectado se a conexão for bem-sucedida, você poderá
desfrutar da sua música.
Chave mestre-escravo
Quando o fone de ouvido estiver conectado ao telefone, coloque o host na caixa de carregamento para carregar. Em
seguida, o fone de ouvido secundário alternará automaticamente para o host e o fone de ouvido não será desconectado.
O fone de ouvido retirado da caixa de carregamento será iniciado automaticamente e conectado novamente.
A correspondência inteligente
O usuário usa pela segunda vez, fones de ouvido na caixa de carregamento, os fones de ouvido entram no estado de
carregamento (a luz indicadora do fone de ouvido fica vermelha). Após 2-3s, retire os fones de ouvido, a luz azul do
fone de ouvido pisca lentamente.
Os fones de ouvido principal e secundário são automaticamente ativados e emparelhados.
Desligar
Quando o fone de ouvido está ligado, mas não está conectado ao bluetooth, ele é desligado automaticamente após 3
minutos, colocando o fone de ouvido na caixa de carregamento para entrar no estado de carregamento, o fone de
ouvido também é desligado automaticamente ou pressione manualmente o botão de função de qualquer fone de
ouvido por 3 segundos para desligar.
Quando a bateria do fone de ouvido for inferior a 10%, haverá um som de alerta de baixa energia e será desligado
automaticamente após três vezes. Em seguida, o fone de ouvido deve ser carregado a tempo.
Atender / desligar / recusar / retornar a chamada / Siri / Reproduzir / Pausar / Música para cima e para baixo
Use a conexão de telefone celular, quando houver uma chamada, as chamadas recebidas receberão um som e
transmitirão o número de telefone recebido.
1. Pressione qualquer botão de função do fone de ouvido para atender o telefone.
2. Pressione o botão de função para desligar o telefone.
3. Pressione e segure o botão de função do fone de ouvido por 2 segundos para rejeitar a chamada.
4. Pressione o botão de função três vezes para permitir que o telefone celular redisque o primeiro número de telefone
discado recentemente.
5. Pressione e segure o botão de função por 1 segundo para entrar na Siri no estado “não telefone” e pressione e segure
para sair.
6. No estado da música, pressione o botão de função para pausar e, em seguida, pressione o botão de função para
reproduzir. Clique duas vezes no botão de função no fone de ouvido direito para reproduzir a próxima música e clique
duas vezes no botão de função no fone de ouvido esquerdo para reproduzir a última música.
Especificações de Parâmetros