Professional Documents
Culture Documents
we can reduce
length if it is laterally
supported and need
to be checked THK Top 25 mm
INPUT DATA: 160 mm Gap 0 mm
Length 100.00 cm
P 17.40 T
Mx/Shear 39.10 T-m 0.00 T Factored
My/Shear 0.00 T-m Factored
fy 2500 kg/cm2
Cmx 0.90
Cmy 0.9 Gap 0 mm
n 1.4 160 mm THK Bot 25 mm
E 2000000 kg/cm^2
Area of Plate Top 40.00 cm2
Area of plate Bot 40.00 cm2
115520000
Properties
of
Standard
Section Section plate
plate girder girder
Properties
of Built up
Section
cgx 8.00 cm
cgy 22.500 cm from top Area 194.40 cm^2
Ixx 64735.20 cm^4 Iyy 3080.23 cm^4
Zxx 2877.12 cm^3 Zyy 385.03 cm^3
rxx 18.25 cm ryy 3.98 cm
lx 5.48 ly 25.1
Zpx 3369.6 Zpy 593.64
Section
type Welded section Unrestrained Simply Supported FOR MCR INDIAN CODE Stiffners
AS PER
STAAD
yg 225 Stiffners Provided Yes
ε 1.00 yj 0 Spacing of Stiffners (C) 800 mm
G 769230.8 kg/cm2 Depth of web(d) 360 mm
It 284.93 cm^4 C1 1 c/d 2.22222222
hf 38 C2 0 (AS PER STAAD 1,0,1) Kv 6.16
Bf 0.5 C3 1 d/tw 25.7142857
Iw 1111963.752 R2 0.069860701
Mcr 121153107.9 80825250.61 R1 0.067003481
d/tw 25.71428571 <67ε Ok
Since d/tw < 67 no check for buckling is required. Check for Web Stiffners
For Y-Y Dir. Bending For X-X Dir. Bending For Compression
` b Ratios Section Section Section
b/tf 80 4.00 <=8.4*ε Plastic <=8.4*ε Plastic <=8.4*ε Plastic
(Top) Bi/tf 180 7.2 <=29.3*ε Plastic <=29.3*ε Plastic <=42*ε Semi-Compact
Av 50.40 cm^2 Stress Ratio X-X Av 64 Stress Ratio Y-Y d(Perm) 588
Vd 66.13 T 0 Vd 83.98 0 d(Actual) 360
0.6*Vd 39.68 T 0.6*Vd 50.388 Ae 19440
Bb 1.000 Bb 1 For X-X For Y-Y
λLt 0.264 Mdy 13.49181818 Effective length 1.00 L 1.00 L TRAN / ROT TRAN / ROT
αLT 0.49 Mfdy 0 R,F,R,F R,F,R,F R=RESTRAINED
ΦLt 0.550 β 0 Unsupported length 100 100 F=FREE
Mdvy Min Rad. Of gyration
ϰLt 0.97 T-m 13.49 T-m 18.25 cm 3.98 cm
Fbd 2199.1 kg/cm^2 #DIV/0!
Md 74.10 T-m Buckling Class b c
OK KL/R 5.48 25.12
Shear Cap 73.48 T Shear Cap 83.98 T α 0.34 0.49
OK OK Fcc 657315.65 kg/cm^2 31276.41 kg/cm^2
λ 0.06 0.28
Φ 0.48 0.56
Fcd 2272.73 kg/cm^2 2177.16 kg/cm^2
Pd 441.82 T 423.24 T OK
due to udl
Fixed 7.52 mm
S. Support 37.61 mm
Camber 0.00 mm
After
camber 37.61 mm
x position of
B.M. from
left 5.38 5.38 Without camber
Position of
load from
left 5.50 3.47 With Camber
Point load
in T 0.00 0.00
Defln Under
load 0.0000 0.0000
Defln.at
position 0.0000 0.0000
frequency 2.920 Hz
Cantilever
Simply Supported
1373.57 853.333 853.333 3080.23
Laterally Supported
Unrestrained
Rolled Section
Welded section
Plastic
Compac
t
Semi-
Compac
t
sc, in Stree at
comp. top of
Slender fibre 1359.0 Kg/cm2 Flange 1208.0 Kg/cm2
226.5 Kg/cm2
R,R,F,F 2
F,R,F,R 2
R,F,R,F 1
R,R,F,R 1.2
R,R,R,F 0.8
R,R,R,R 0.65
13.05501435
Kf 1.57
g 385.8 in/s^2
frequency 4.130 Hz