Professional Documents
Culture Documents
Pulsar - ns200 200 As - Users Guide PDF
Pulsar - ns200 200 As - Users Guide PDF
2
Identification Data
The Frame and Engine serial numbers are used to register the motorcycle. They are the unique
alpha-numeric codes to identify your particular vehicle from others of the same model and type.
4
Location of Parts (Pulsar NS 200)
Digital Fuel Tank Cap OFF ON
Speedometer
Manual Choke
Lever
Clutch Lever
LED
Tail
Lamp
Front Fork
Pillion
Foot
Rest
Disc
Brake
5
Location of Parts ( Pulsar NS 200)
Grab Handle Pillion Seat Rider Seat Front Brake Lever
MAX
MIN
Rear
Number
Plate Coolant Coolant
Level Tank Cap
Indicator
Nitrox Rear
Shock Absorber
6
Location of Parts (Pulsar AS 200)
MAX.
MIN.
Rear
Number Coolant Coolant
Plate Level Tank Cap
Indicator
Nitrox Rear
Shock
Absorber
7
Steering cum Ignition Lock
Steering cum Ignition Lock : To Lock the Steering : To lock the steering,
turn the handle bar to the left side. Push &
It has three positions.
release the key. Turn the key to “LOCK”
position and remove the key. Steering lock
LOCK: Steering locked. Ignition OFF. can be done on left side only.
To Unlock the Steering : To unlock steering,
OFF: Steering unlock. Ignition OFF. insert the key in steering cum ignition lock &
turn it clockwise to “OFF” or “ON” position.
Key : A common key is used for ‘Steering
ON: Steering unlock. Ignition ON. cum Ignition lock’, ‘Fuel tank cap’ & ‘Rear
Seat’.
8
Fuel Tank Cap / Fuel Tap
Fuel Tap
9
Speedometer Details
1
2
3
4
5
6
7
M
8 S
9 10
Speedometer display will work when, only both 6. Low Battery Indicator : It indicates battery needs
Ignition switch & kill switch are in ‘ON’ position. charging.
1. Fuel Level Indicator: It shows fuel level in fuel tank. 7. Low Oil Pressure Indicator ( ) : It blinks when
2. Tachometer Dial: It shows engine speed in RPM. engine oil pressure is low.
3. Turn Signal Indicator (LH & RH): When Turn signal 8. Coolant Temperature Indicator ( ) : It blinks when
switch is turned to Left or Right, Turn pilot Indicator - engine coolant Temperature is more than 1150
LH or RH will flash. centigrade.
4. Neutral Indicator: When the transmission is in 9. Bajaj Logo : Bajaj logo flying ‘B’ continuously glows.
Neutral, Neutral indicator will glow. 10. Mode Button : Mode button used for changing the
5. Hi Beam Indicator: When Headlight is ‘ON’ & Hi mode while selecting & setting Trip1, Trip2, ODO,
beam is selected with engine running, Hi beam Clock & Service reminder.
indicator will glow.
10
Speedometer Details
11
12
13
14
15
16
17
M
S
18
19
11. Engine Over Rev Indicator : It glows when engine 14. Digital Clock : It indicates time in HR : M (AM/PM)
RPM crosses 9500 RPM. 15. Speedometer: Vehicle speed will be displayed in
12. Service Reminder ( ): ‘Spanner’ symbol glows digital form in Km / Hr.
when ODO meter reading reaches set Kms. for 16. Odometer : The Odometer shows the total distance
service. This Icon will flash at - that the vehicle has covered. Odometer can't be
1st : 450 km 2nd : 4950 km, reset to ‘Zero’.
rd
3 : 9950 km, 4th : 14950 km 17. Trip Meter : Trip 1 & Trip 2 shows the distance
and subsequently at each 5000 kms. Icon will traveled since it was last reset to zero.
continue to glow till it is reset. This icon is to be 18. Set Button : Set button used for setting Clock &
reset after service is carried out. Service reminder.
13. Side Stand Indicator : When side stand is ‘ON’ . 19 Reserve Indicator : It blinks continuously when
Side Stand Indicator will light. petrol level in tank reaches reserve level ( 1 bar or
less)
11
Speedometer Setting
Service Reminder
TRIP1/2
Mode
Set
D
B
Tool Kit
16
Front Seat / Battery
17
Fitment of Front & Rear Seat
Front seat lug & bracket
C D E
A
G F
B
H
18
Removal & Fitment of Side Cover LH / RH
A
D C
E
B
20
How to Ride Your Bike
1. Starting The Engine : Wait 15 sec. between each operation of the
• Turn the fuel tap knob to ‘ ’ or ‘ ’ starter which will facilitate battery to recover.
position. Note : The motorcycle is equipped with a starter
• Turn ignition switch key to ‘ ? ’ position. lockout switch. This switch ensures that engine
• Keep kill switch in ‘ ’ position. does not start if the transmission is in gear.
• Confirm that transmission is in neutral / However, the engine can be started in any
press the clutch lever. gear if the clutch lever is pressed.
• If the engine is cold or when starting for
Note : Incase of battery discharged condition,
first time, use manual choke ( ) for quick
vehicle can be started by pushing it.
starting. Choke lever is located on LH side
of carburettor.
• Keep throttle completely closed, press 2. Shifting Gears :
starter button, • Close throttle & depress the clutch.
• Release starter button as soon as engine • Shift into next higher or lower gear.
starts. • Open the throttle and release the clutch
• When the engine is warmed up enough to lever slowly and simultaneously.
idle without using choke, return the manual 3. Moving Off :
choke to OFF position. • Check that side stand is up / retracted.
Note : Do not let the engine idle longer than 3 • Depress the clutch lever.
minutes otherwise it will overheat. • Shift into 1st gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
Caution : Do not operate the starter
• As the clutch starts to engage, open the
continuously for more than 5 seconds throttle a little more, giving the engine just
otherwise battery would get discharged. enough rpm to prevent it from stalling.
21
How to Ride Your Bike
6 4. Braking :
5
4 • Close the throttle completely, leaving the
3 clutch engaged (except where shifting gears)
2
N so that the engine braking will help slow
1 down the motorcycle.
• Shift down one gear at a time so that you
Gear shifting are in Neutral when you come to a complete
Gear shifting Lever pattern stop.
• When stopping, always apply both brakes at
Recommended Speed for Shifting Down the same time. De-clutch as necessary to
From 6th to 5th Gear 54 km/h avoid engine stalling.
45 km/h • Never lock the brakes, or it will cause the
From 5th to 4th Gear
tyres to skid. When cornering, use brakes
From 4th to 3rd Gear 35 km/h judiciously and do not de-clutch. Reduce
From 3rd to 2nd Gear 25 km/h your speed before you get into the corner.
For emergency braking, disregard
From 2 nd st
to 1 Gear 15 km/h downshifting, and concentrate on applying
brakes as hard as possible without skidding.
Warning : When shifting down to lower
gear, do not shift at such high speed 5. Stopping the Vehicle :
that engine rpm jumps excessively. This • Close the throttle completely.
may cause engine damage, & rear wheel
• Shift the transmission into neutral.
may skid. Downshifting should be done
at speeds as recommended in table • Bring the vehicle to complete stop.
above. • Turn the ignition switch off.
22
How to Ride Your Bike
6. Parking the Vehicle : 7. Running IN
6.1 Parking using center stand. Proper running-in is important for better life &
trouble free performance of the vehicle.
• Center stand is available as accessories
at dealership. • During first 2000 kms running-in period do
not exceed following speed limits.
• Support the motorcycle on a firm level
surface with the center stand.
Kms 1st 2nd 3rd 4th 5th 6th
6.2 Parking using side stand. 0 - 1000 10 18 24 32 40 48
• Support the motorcycle on a firm level 1000 - 2000 16 24 30 38 46 54
surface with the side stand.
• Lock the steering.
• Always keep the speed below the limits
mentioned in the table.
CAUTION : Do not park on a soft or
steeply inclined surface or the motorcycle • Do not rev the engine excessively.
may fall over. • Do not start moving or rev the engine
immediately after starting. Run the engine
for a minute at idle speed to give the oil a
chance to workup into the engine.
23
How to Ride Your Bike
Fuel Saving Tips : Ensure following maintenance points to get
A well maintained vehicle and good driving optimum performance from your bike.
can contribute a lot to the saving of feul.
Following are a few simple fuel saving tips. Fuel Check fuel lines & connections
for leakage.
Good Riding Habits :
• Ride smoothly and steadily at a reasonable Spark Plugs Inspect and clean spark plugs.
speed. Adjust electrode gap. Replace
• Avoid harsh braking. spark plugs as per P.M. Chart.
• Change the gear judiciously according to Air Filter Clean the air filter element
the speed and load requirement. periodically. Replace as per
• Don’t overload the vehicle above the Periodic Maintenance Chart.
specified payload. Engine Oil Check engine oil level. Always
• Use the accelerator judiciously. use recommended grade and
• Cut off the engine if you want to stop for quantity.
more than two minutes.
Brakes Ensure that the brakes are not
How to check mileage (Fuel efficiency) dragging / binding.
Best way to calculate mileage is by following
the full tank to full tank method. Clutch Ensure correct clutch lever
• Fill way tank full up to small mouth (brim). play.
• Run the bike for say 100 km. Tyre Air Always maintain recommended
• Fill the tank full again in same fuel filling Pressure tyre pressure.
station, preferably from same fuel
dispenser. Carburettor Clean & adjust the carburettor.
Adjust idling speed.
• Divide kilometers run / fuel quantity filled.
24
Safe Riding Tips
Safe Riding Tips • Drive cautiously. Start early & reach your destination
• Always wear Helmet while riding. Your helmet should safely.
conform to appropriate Safety standards. • Always carry vehicle registration & insurance papers,
• Thoroughly read the and a valid driving licence with you.
instructions given in this manual • Avoid driving on loose sand or stones where vehicle
and follow them carefully. is likely to skid.
• Avoid unnecessary accessories • Properly wrap-up loose clothes while riding to avoid
for the safety of both rider and entangling in wheel or other objects on road.
other motorists. • Always concentrate on Safe riding.
• Get familiar with and follow
traffic rules & regulations in your states as well as Rainy Season Care :
general traffic signs. • It is suggested to customer to take appropriate care
• Familiarise yourself well with starting, acceleration and in area of high rainfall area. Appropriate surface
braking of the vehicle. preventive coat to avoid rusting on account of
• When applying the brakes, use both front & rear adverse atmospheric conditions.
brakes simultaneously. Applying only one brake may • Vehicle cleaning to be done with soft & clean wet
cause the rider to loose control. cloth to avoid scratches on painted parts.
• Riding at proper speed and avoiding unnecessary • Clean & lubricate all the important parts as detailed in
acceleration and braking are important not only for a periodic maintenance chart.
safety and low fuel consumption, but also for long life • Do not apply direct water jet on painted, electrical /
of the vehicle. electronic parts.
• During monsoon drive the vehicle more cautiously. • Do not obstruct engine cooling by adding mud
Remember vehicles skid more easily during light protection sheet from front.
showers.
25
Engine Oil
Recommended Engine Oil:
A
Model Recommended Engine oil Grade
Tyre Pressure :
Front Wheel
Keep appropriate tyre pressure as mentioned
CAUTION : Tubeless tyres are fitted in this below to increase life of the tyre & for better
motorcycle. The walls of the tyres in fuel consumption.
contact with the wheel rim should not be
damaged in any way during fitment / Front 25 PSI
removal of tyre. The tyre side walls in
contact with wheel rim seals air. Pulsar 200 NS/AS Rear (Solo) 28 PSI
Removing Front Wheel :
Rear (with Pillion) 32 PSI
• Park vehicle perpendicular to the ground on
level surface as mentioned in page no. 21
(6.1)
• Remove speed sensor cable from case meter Note : Ensure tyres fitted comply with local
assembly. rules and regulations governing tyres.
• Loosen front axle nut.
• Remove front wheel assembly from fork.
27
Battery
• It is always recommended to hand over
the same to an Authorised battery / Bajaj
dealer for proper disposal.
• When low battery icon pops-up on
speedometer display, it is advised to get in
touch with Bajaj dealer & get it charged
immediately.
C B
Radiator Cap
A Expansion Tank
29
Coolant
Coolant Specifications :
Antifreeze ready mix (Recommended Brand-
Reservoir cap Motul : Moto cool expert,
(for coolant top up)
Castrol : Radicool
Total coolant quantity : 1000 ml. (750~780 ml
MAX in radiator & 220~230 ml expansion tank).
Coolant Top up
MIN • Park vehicle perpendicular to the ground on
level surface as mentioned in page no. 21
(6.1)
• Check coolant level in engine cold condition
only.
• Ensure coolant level is between Min & Max
Warning : Coolant is poisonous and is a mark.
health hazard. • Always top up coolant through reservoir cap.
Avoid skin, eye and clothing caontact • Always replace coolant with recommended
with coolant. If it gets into your eyes, brand only. (Radicool from Castrol, Moto
rinse immediately with water and contact cool expert from Motul) or equivalent.
a doctor. • Use nitrile rubber hand glows while draining
& topping up coolant.
Wash affected skin areas immediately • Do not top up coolant through radiator cap.
with soap and water. If coolant is Where pre-mixed coolant is not available
swallowed, contact a doctor coolant concentrate and distilled water
immediately. Change clothes that have should be mixed separately in a clean jar in a
come into contact with coolants. Keep proportion of 1:1
coolant out of the reach of children
29
Periodic Maintenance Information
Spark Plug Drive Chain Slackness
• Remove spark plugs by using plug • Chain slackness will have to be adjusted
spanner. whenever required.
• Clean the spark plugs. • Std. Chain slackness 15 ~ 25 mm.
• Adjust the gaps if incorrect by bending • Marking on chain adjusters should be
outer electrode carefully. identically positioned on both sides.
A C
0.7 to
0.8 mm
30
Periodic Maintenance Information
Drive Drive
Chain Chain
Cleaning Lubrication
Drive chain must be cleaned & lubricated as Method of O-ring Chain Lubrication :
per periodic maintenance schedule. • Park vehicle perpendicular to the ground on level
Drive Chain (O-ring type) surface as mentioned in page no. 21 (6.1). Clean
the chain by using lint free cloth (If excessive
• ‘O’ rings must always be kept wet for mud / slush found approach Bajaj Service Center
best performance hence lubricate every for proper cleaning)
500 Km. • Shake the can vigorously by holding vertically
upright till the noise of steel ball inside heard
• O-ring chain lubrication can easily be
uniformly.
done by owners using Bajaj ‘Chain Lube • Hold spray can at the back of rear sprocket with
Spray Can’ available with Bajaj dealers, extension tube nose at 5~10 cm.
or equivalent. Ensure that the lubricant • Rotate the wheel in reverse direction & spray the
lube on middle portion of the chain up to full
does not damage the rubber 'O' rings. length of the chain.
31
Brake Fluid
Front Rear
Brake Brake
Fluid Fluid
Reservior Reservior
1 Clean the vehicle with water wash & dry Ensure to prevent water entry in
Petrol tank, Silencer & electrical
completely
parts.Use caustic free detergent for
washing.
2 Engine oil & engine oil C,R R R R R R R R SAE 20W50 "API SJ" Grade
filter* Replace at every 5000kms. And
top-up at every 2500 Kms (If
required)..
33
Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation Remarks
No. Servicing 1st 2nd 3rd 4th 5th 6th 7th
500 4500 9500 14500 19500 24500 29500
Kms ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000
11 Sealed drive chain cleaning & lubrication CL,L,A CL,L CL,L CL,L CL,L CL,L CL,L Cl,L (Customer to apply OKS chain
A A A A A A A lube spray at every 500 kms)
12 Engine air breather tube C,R C,R C,R Check & replace if required
13 Brake cam & brake pedal pivot pin C,L,R C C,L,R C,L,R C,L,R C,L,R C,L,R C,L,R Use recommended AP grease.
14 Brake lining or pad -Check wear indicator Replace brake shoes /brake
C,R C,R C,R C,R R C,R C,R R pad at every15000 Kms
19 Ignition switch barrel cleaning & handle bar C,CL C,CL C,CL C,CL C,CL C,CL C,CL C,CL Use recommended WD40
control switches contacts cleaning, spray
34
Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation Remarks
No. Servicing 1st 2nd 3rd 4th 5th 6th 7th
500 4500 9500 14500 19500 24500 29500
Kms ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000
20 Steering play C,A C,A C,A C,A C,A C,A C,A C,A
Steering stem bearing*** & Cap steering C,CL C,CL C,CL C,CL Check & replace if damaged. Use
21 bearing(Plastic)** L,R L,R L,R L,R HP Lithon RR3 grease for
lubrication.
22 Main stand & side stand pin** CL,L CL,L CL,L CL,L Use recommended AP grease.
23 All fasteners tightness C,T C,T C,T C,T C,T C,T C,T C,T
35
Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation Remarks
No. Servicing 1st 2nd 3rd 4th 5th 6th 7th
500 4500 9500 14500 19500 24500 29500
Kms ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000
29 Radiator fins C,T C,T C,T C,T C,T C,T C,T C,T
* It is strongly recommended to use specified grade only , In case of any other engine oil of same specifications is
used the frequency would be every 5000 kms
** As applicable to model
*** More frequent cleaning is required while driving in dusty environment.
Note: periodic parts / lubricants as per periodic maintenance & chart are mandatory & the same is chargeable to customer.
36
36
Non-Use Maintenance
Non-use maintenance is necessary if a vehicle • Fill 10% excess air pressure in both wheels.
remains off road for a longer duration (more • Do not apply oil on front brake disc, to
than 15 days**). The correct and careful non- prevent rusting. If the front brake disc rusts
use maintenance carried out before storing during storage, do not attempt to clean it
with soap water. The rust will go off
the vehicle will prevent the vehicle from
automatically during first few application of
rusting and from such other non-operational brake.
damages like fire hazards. ** For Battery :
• Clean the entire vehicle thoroughly. a. Remove battery and keep it on wooden
• Empty the fuel from the fuel tank and plank, in properly ventilated area.
carburettor float bowl (if fuel is left in for a b. Before taking the vehicle for use.
longer time, the fuel will break and gummy • Get the battery recharged from the
substance could clog the carburettor). Authorised Service Center / Battery Dealer.
• Remove spark plug & put several drops of • Apply petroleum jelly on terminals.
engine oil into the cylinder. Kick engine (applicable to certain models).
over slowly a few times to coat cylinder Preparation for regular use after storage :
wall with oil & install spark plug. • Clean the vehicle
• Set the vehicle on a box or a stand so that • Fit the battery after recharging.
both wheels are raised off the ground. • Make sure the spark plug is tight.
• Spray oil on all unpainted metal surfaces to • Fill the fuel tank with fuel.
prevent rusting. Avoid getting oil on rubber • Change the engine oil.
parts or brake liners. • Check all the points listed in the Daily Safety
• Cover entire vehicle neatly. Make sure that Checks section.
storage area is well ventilated & free from • Check and inflate tyres to proper tyre
any source of flames or spark. pressure.