Professional Documents
Culture Documents
Vetoproof CM741
Single component penetrating
waterproofing system for concrete
Uses
uu On concrete and cementitious substrates.
uu Swimming pools.
uu Reservoirs and water tanks.
uu Canals, harbors and dams.
uu Concrete pipes.
uu Tunnels.
uu Retaining walls.
Product Description
Vetoproof CM741 provides total and permanent waterproofing solution to water leakage, ingress or seepage in
concrete structures or any cementitious substrates due its unique, surface applied penetrative capillary water
proofing system. Vetoproof CM741 works through internal crystallization that seals the pores and hairline cracks in
the concretes thus blocking effectively further passage of water. The active chemical that made up Vetoproof CM741
serves as a catalyst to reactivate crystallization process every time water penetrates into the structure through newly
formed capillaries therefore ensuring permanent water tightness.
Application Limitations
In the event that the use of masonry brush is the
hh Do not apply Vetoproof CM741 on temperatures
method for application, mix 7 - 7.5 liters of water with
below 5°C.
25 kg of Vetoproof CM741, while when a power spray
gun is being used, prepare a mixture of 8 – 8.5 liters of hh Vetoproof CM741 could not be used as an additive
water with 25 kg of the product. to concrete or plasters.
Mix only as much product as necessary and ensure to hh Vetoproof CM741 is not suitable for use as curing
stir the mixture regularly. In the event that the mixture compounds.
starts to set, it is not advisable to add more water,
Health & Safety
instead simply re-stir the prepared mixture in order to
reinstate its workability. Vetoproof CM741 contains cement powders which,
when mixed or become damp, release alkalies which
Apply Vetoproof CM741 into two coats with the use
can be harmful to the skin. During use, avoid inhalation
of a masonry brush or power spray gun. Make sure to
of dust and contact with skin and eyes. Wear suitable
apply the second coat while the first coat is still “green”.
protective clothing, gloves, eye protection and
All areas where Vetoproof CM741 is applied should be respiratory protective equipment. The use of barrier
kept damp, protected against direct exposure from creams provide additional skin protection. In case
sunlight, wind and frost by covering the area with of contact with skin, rinse with plenty of clean water,
polythene sheeting, damp hessian cloth etc. for a then cleanse with soap and water. In case of contact
period of 5-7 days. with eye, rinse immediately with plenty of clean water
and seek medical advice. If swallowed, seek medical
Ensure that the period between the application of
attention immediately – do not induce vomiting.
the first and second layer is between 3 – 4 hours at a
temperature of 20°C. Vetoproof CR741 is non-flammable.