Professional Documents
Culture Documents
G-Series
VetraFin-G-Series
Sentech's VetraFin G-Series system is a highly transparent
system for glass fin facades. The system features simple lines,
minimal connections, and a unique look with no exterior hardware,
bolts or plates. This proprietary system can be used to design
facades with insulated glass with any type of soft coatings; this
feature allows for the design of walls with the highest performance
values available in the marketplace.
6061-T6 Aluminum
construction
Recommended maximum
fin spacing= 7’-0”
Sentech Architectural Systems
Tel: 512-266-7045
w w w. s e n t e c h a s . c o m
VetraFin
P-Series
VetraFin-P-Series
Sentech’s VetranFin-P series is a highly efficient glass fin
system for facades up to 50’ in height. The system features
minimal patch fitting corner connections and laminated glass fins.
Sentech Architectural Systems
Tel: 512-266-7045
w w w. s e n t e c h a s . c o m
VetraPoint
H-Series
VetraPoint-H-Series
The VetraPoint-H system is intended for use in horizontal
fin applications. The horizontal fins can be designed in glass,
steel, or stainless steel. This solution is ideal for openings with
a large aspect ratio.
Recommended maximum
fin spacing: 12’-0”
Sentech Architectural Systems
Tel: 512-266-7045
w w w. s e n t e c h a s . c o m
VetraPoint
S-Series
VetraPoint-S-Series
Sentech's proprietary line of fittings provides unparalleled
simplicity and design flexibility. The VetraPoint S-Series fittings are
designed for glass fin applications with walls up to 50' tall using
laminated or insulated glass. Glass fins are typically offered in
lengths up to 25'.
Recommended maximum
panel aspect ratio= 1.3
Recommended maximum
cable spacing= 6'
Recommended maximum
panel aspect ration=1.3
Recommended maximum
cable spacing=7’-0”
Sentech Architectural Systems
Tel: 512-266-7045
w w w. s e n t e c h a s . c o m
VetraStep
316 stainless steel construction