Professional Documents
Culture Documents
(iii) Please submit FORM PAE with documents as in the Checklist for PAE.
(i) A Graduate Engineer who has obtained Professional Engineer registration from
overseas has to PASS Code of Professional Conduct Assessment in order
to apply to be registered as Professional Engineer.
(iii) Please submit FORM PAE with documents as in the Checklist for CEng.
***
Rev. No. : 3
Date : 9.4.2019
BEM/CL/PAE/01
1
SENARAI SEMAKAN
B. Borang PAE yang telah lengkap diisi hendaklah disertakan bersama dengan:
PAE CEng
5. Cek / bank draft / kiriman wang / wang pos / kiriman atas talian atas nama
Lembaga Jurutera Malaysia / kad debit / kad kredit.
i) Yuran proses RM100.00
ii) Yuran peperiksaan RM500.00
Dua (2) salinan setiap satu laporan yang disahkan oleh Jurutera Profesional
sama bidang. Borang BEM/Form/PAE/02 yang lengkap perlu dilampirkan
bersama-sama (i) dan (ii).
8. Salinan sijil CEng / PEng (disahkan oleh Jurutera Profesional sama bidang).
10. Salinan terkini resit pembaharuan CEng / PEng (disahkan oleh Jurutera
Profesional sama bidang).
2
C. (i) Permohonan menduduki PAE yang diterima akan diproses dan calon yang layak menduduki
peperiksaan ini akan dihubungi oleh Pemeriksa Utama yang telah dilantik oleh Lembaga
Jurutera Malaysia.
(ii) Calon PAE hendaklah berhubung terus dengan Pemeriksa Utama sehingga peperiksaan
tersebut selesai. Pemeriksa Utama akan mengemukakan laporan peperiksaan kepada
Lembaga Jurutera Malaysia untuk penilaian.
(iii) Permohonan menduduki PAE Route 2 yang diterima akan diproses dan calon yang layak
akan dimaklumkan tarikh dan tempat Assessment Code of Professional Conduct akan
diadakan.
(iv) Calon akan diberitahu keputusan penilaian setelah disahkan oleh mesyuarat Lembaga
Jurutera Malaysia.
***
3
Rev. No.: 1
Date: 9.4.2019
FORM PAE
Name :..…………………………………………………………………………………………………………………………
Address: …………………………………………………………………………………………………………....................
…………………………………………………………………………………….………………….………………………. ...
Professional Qualification by Oversea Regulatory Body (e.g.: CEng from ECUK): ……………………………………
……………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………
I have ………………………………… years of practical experience in engineering and have complied with section
10(1)(b) of the Registration of Engineers Act 1967.
I enclose herewith * money order/bank draft/ cheque No/ online payment : ……………………... for the amount of
RM500.00 (Examination fee) + RM100.00 (Processing fee).
Date: ……………………………………
…………………………………….
(Signature)
PENALTY
Section 24(a) of the Registration of Engineers Act 1967: "Any person, sole proprietorship, partnership or body corporate who
procures or attempts to procure registration or a certificate of registration under this Act by knowingly making or producing or
causing to be made or produced any false or fraudulent declaration, certificate, application or representation whether in writing or
otherwise, shall be guilty of an offence and shall, on conviction, be liable to a fine not exceeding ten thousand ringgit in the case of
an individual, or fifty thousand ringgit in the case of a sole proprietorship, partnership or body corporate, or to imprisonment for a
term not exceeding three years, or to both.".
__________________________________________________________________________________________
Rev. No. : 2
Date : 9.4.2019
LAMPIRAN PAE-1
Name: …………………………………………
PROFESSIONAL EXPERIENCE
A B C Experience area E
(in months)
STATEMENT OF TRAINING &
EXPERIENCE
(SINCE REGISTRATION AS GRADUATE
ENGINEER)
D1 D2 D3 D4 D5
Planning/Management
appointment separately: include some indication of
Example: magnitude and complexity of work in which served
research/teaching
July 90 to engaged, your duties and degree of
May 95 responsibility) If necessary additional sheets
Design/Office
may be attached.
NOTE: STATEMENT MUST BE AFTER
Site/field
REGISTERED AS GRADUATE
Total
ENGINEER
Signature
Total
Month
Rev. No. : 1
Date : 27.3.2017
LAMPIRAN PAE-2
AKUAN PEMOHON
PEPERIKSAAN PENILAIAN PROFESIONAL
YA TIDAK
Lain-lain kenyataan:
---------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------
Yang benar,
Nama Penuh :
Dear Sir,
With reference to the above, I hereby confirm that .................. (Name of Applicant)................................... has worked as an
engineer in our firm/division from * …........ (date/month/year).............................. until ................(date/month/year)............
Please specify the Please state the post held and summary of the work the applicant has undergone here.
exact date of
service. Note:
• If the applicant have worked in more than one department/company, he/she is required
I certify that .................................. (Name of Applicant) ............................................ has acquired satisfactory practical
experience as a Graduate Engineer and meets the requirements of Section 10 (1) (b) of the Registration of Engineers Act 1967
(Revised 2015).
Yours faithfully,
..................................................................................
(Signature of a Professional Engineer under whom
applicant have obtained the experience)
Name : ….....................................................................................................
Position : ….................................................................................................
Registration No. : ….................................................................................... …..........................................................
Branch of Engineering : ….......................................................................... (PE/PEPC Stamp)
SAMPLE1(ii)
XYZ COMPANY LETTERHEAD
Dear Sir,
With reference to the above, I hereby confirm that .................. (Name of Applicant)................................... has worked as an
engineer in our firm/division from * …........ (date/month/year).............................. until ................(date/month/year)............
Please state the post held and summary of the work the applicant has undergone here.
Please specify the
exact date of Note:
service.
• If the applicant have worked in more than one department/company, he/she is required
to submit two or more statements of practical experiences.
• Where space provided is insufficient, please attach annexed sheet.
I certify that .................................. (Name of Applicant) ............................................ has acquired satisfactory practical
experience as a Graduate Engineer and meets the requirements of Section 10 (1) (b) of the Registration of Engineers Act 1967
(Revised 2015).
Yours faithfully,
..................................................................................
(Signature of Head of Department / Manager /
Director / CEO)
Name : ….....................................................................................................
Position : ….................................................................................................
SAMPLE 2
Date:
Registrar
Board of Engineers Malaysia
17th Floor Block F JKR Headquarters
Jalan Sultan Salahuddin
50580 Kuala Lumpur
Dear Sir,
With reference to the above, I hereby confirm that .................. (Name of Applicant)................................... has worked as an
engineer at XYZ Company from …........ (date/month/year).............................. until ................(date/month/year)............
I certify that .................................. (Name of Applicant) ............................................ has acquired satisfactory practical
experience as a Graduate Engineer and meets the requirements of Section 10 (1) (b) of the Registration of Engineers Act 1967
(Revised 2015).
Yours faithfully,
..................................................................................
(Signature of a Professional Engineer under whom
applicant have obtained the experience)
Name : ….....................................................................................................
Position : ….................................................................................................
Registration No. : ….................................................................................... …..........................................................
Branch of Engineering : ….......................................................................... (PE/PEPC Stamp)