Professional Documents
Culture Documents
DX-G
Next-generation
CR System
The DX-G digitizer unites superb image
quality with a drop-and-go buffer-based
workflow and enables a potential
reduction in patient dose. It offers the
unprecedented convenience of being
able to combine standard phosphor
plates and needle-based detectors.
2
DX-G
SAFETY
Region Safety EMC Laser
3
DX-G
technical
SPECIFICATIONS
GENERAL Power
• 220 - 240V/50-60Hz
Drop-and-go cassette buffer
Standby 87W, peak 590W, fuse 16A
5 cassettes of mixed sizes input buffer and 5 cassettes
• 120V/60Hz (USA)
of mixed sizes output buffer
Standby 92W, peak 621W, fuse 15A
• 100V/60Hz (Japan)
Throughput
Standby 92W, peak 621W, fuse 15A
35 x 43 cm (14 x 17 inch) = approx. 83 plates/hour
Agfa and the Agfa rhombus are trademarks of Agfa-Gevaert N.V., Belgium, or its affiliates. DirectriX and © 2010 Agfa HealthCare NV
the DirectriX logo are trademarks of Agfa HealthCare NV, Belgium or its affiliates. All other trademarks
All rights reserved
are held by their respective owners and are used in an editorial fashion with no intention of infringement.
The data in this publication are for illustration purposes only and do not necessarily represent standards Printed in Belgium
or specifications, which must be met by Agfa HealthCare. All information contained herein is intended for Published by Agfa HealthCare NV
guidance purposes only, and characteristics of the products and services described in this publication can
B-2640 Mortsel - Belgium
be changed at any time without notice. Products and services may not be available for your local area.
Please contact your local sales representative at agfa.com for availability information. Agfa HealthCare 5OC18 GB 00201010
diligently strives to provide as accurate information as possible, but shall not be responsible for any
typographical error.