Professional Documents
Culture Documents
REVISED SYLLABUS
FOR
DEGREE PROGRAMME
2017
2
PREFACE
The syllabi of U.G programme has been revised and approved in the 24th Academic Council
Meeting,2017.The academic programme of NERIST in Technology stream has been designed to
consist of three modules i.e Base(Certificate), Diploma and Degree Modules. In applied Science
Stream four years Degree Module is offered.
The syllabi for Base, Diploma and Degree programmes of NERIST are unique and innovative
and have been prepared by the faculty of the Institute keeping the requirement of AICTE,UGC and
ICFRE guidelines in mind.
The following norms have been followed in presenting the structures and contents.
COURSE CODE:
Courses are denoted by coded comprising two letters and four digits. The letters indicate the
Department which is offering the courses. The digit represents the following:
i. The first digit from the left stand for the year.
ii. The second digit 1 or 2 from the left stands for the odd or even semester respectively
for the regular courses.
iii. The second digit 3 or 4 from the left stands for theodd or even semester respectively
for the bridge courses at the degree level.
iv. The third and the fourth digits from the left is used for course number of which 00 to 49
are of theory or courses with more theory component and 50 to 99 are for practice or
courses with more practice components.
Besides the following course codes are specifically reserved:
Y299 - Project.
6266 - Study Tour.
6199 - Industrial Tour.
YS77 - Audit Course.
Y288 - Extra Curricular Activities and discipline grades.
“Y” stands for years and “S” for Semester.
COURSE CREDITS:
Lecture/Tutorial: One Hour per week per semester is equivalent to one credit. Extra tutorials, whenever
applicable do not carry any credits.
Practice: Two hours per week per semester is equivalent to one credit. If the number of practice hour
is an odd number and more than one, then the credits equivalent to the next higher even number of
hours will be assigned. For example, 3 hours of practice will carry 2 credits, 5 hours carries 3 credits
and so on.
UNITIZATION:
The course has been unitized with the number of units ranging from IV to VI, depending upon
the credit of the course, coverage required and the nature of the course. Each unit has been assigned
specific number of contact hours, which has been fixed @14 contact hours per lecture credit of the
course.
Recommended Books:
Suggestions on the recommended books have been given at the end of each course, which
may be supplanted by the Course Coordinator, if required, while offering the Course.
3
Content
Departments Page
Department of Forestry 5
4
DEPARTMENT OF FORESTRY
Programme: B.Sc. Forestry (4 year programme)
Ist Year:
Semester I
L T P Cr
FR 3101 Concepts of Forestry 2 1 0 3
FR 3102 Wildlife Biology 2 0 2 3
CE 3103 Surveying-I 2 0 2 3
CS 3101 Basics of Computers 2 0 2 3
CY 3102 Environmental Chemistry 3 0 2 4
HS 3102 Personality and Society 3 0 0 3
MA 3102 Comprehensive Mathematics- IA 3 1 0 4
PH 3103 Atmospheric Physics & Climate Change 3 0 0 3
26
Semester II
FR 3201 Microbiology and Forest Pathology 3 0 2 4
FR 3202 Techniques in Forestry 3 0 2 4
FR 3203 Field Practice 0 0 6 3
CE 3202 Surveying II 3 0 2 4
CY 3203 Biochemistry 3 0 2 4
MA 3203 Applied Mathematics 3 1 0 4
23
IInd Year:
Semester I
FR 4101 Agroforestry & Horticulture 3 0 2 4
FR 4102 Forest Nursery Management 2 0 2 3
FR 4103 Medicinal & Aromatic plants 2 0 2 3
FR 4104 Dendrology 3 0 2 4
FR 4105 Forest Protection 2 1 0 3
MA 4101 Biostatistics & Experimental Design 4 0 0 4
21
Semester II
FR 4201 Wild life Management 3 0 2 4
FR 4202 Forest Ecology 3 0 2 4
FR 4203 Silvicultural Systems 3 0 0 3
FR 4204 Tribal Studies & Ethnobotany 3 0 0 3
FR 4205 Biotechnology 3 0 2 4
HS 4202 Forest Economics 3 0 0 3
CS 4400 Programming with C/C++ (with application) 3 0 2 4
25
IIIrd Year:
Semester I
FR 5101 Forest Seed Technology 2 0 2 3
FR 5102 Silviculture of Indian Trees 2 0 2 3
FR 5103 Wood Anatomy 3 0 2 4
FR 5104 Forest Entomology & IPM 2 0 2 3
FR 5105 Remote Sensing & GIS 3 0 2 4
FR 5106 Forest Mensuration 3 0 2 4
21
Semester II
FR 5201 Tree Improvement 3 1 0 4
FR 5202 Wood Science & Technology 3 0 2 4
FR 5203 Timber & Non-Timber Forest Products 3 0 2 4
FR 5204 Forest Policies & Planning 2 1 0 3
CE 5207 Forest Engineering 3 0 0 3
AE 5205 Forest Hydrology and Soil Water Conservation 3 0 2 4
22
5
Fourth Year:
Semester I
FR 6101 Forest Management & Working Plan 3 1 0 4
FR 6102 Conservation Biology 2 1 0 3
FR 6103 Soil Science & Management 3 0 2 4
FR 6104 Rangeland Management 2 0 2 3
FR 6105 Logging & Ergonomics 3 0 2 4
HS 6101 Trade & Marketing of Forest Products 3 0 0 3
21
Semester II
FR 6279 Training & Extension Forestry *** 0 0 30
15
FR 6251 Technical Report 0 0 10
5
FR 6289 Seminar & Viva-voce 0 0 10
5
25
***Students shall be attached with the Forest Department & Allied Departments for Field Work & Experience for a
minimum period of 60 days.
Field Trips: As per course requirement in all semesters.
COURSE CONTENTS
Recommended Books:
1. Dwivedi, A.P. 1989. Text book of silviculture. IBD, Dehradun.
2. Khanna, L.S. 1993. Principles and practices of silviculture. Khanna Bandhu Publications, Dehradun.
3. Mehta, T. 1989. A hand book of Forest utilization. IBD Dehradun.
4. Negi, S.S. 1981. A hand book of Forestry. IBD, Dehradun
5. Prabhakar , V.K.1993. Forestry and Forest Resources. IBD, Dehradun.
Recommended Books:
1. A.A. Dunbar, 1988. Preservation of wildlife in India, Daya Publishing House, New Delhi.
2. Rajesh Gopal, 1993. Fundamental of Wildlife management, , Justice Home Publication, Allahabad.
3. B.B. Hosetti, 1997. Concept of wildlife Management, , Daya Publishing House, New Delhi.
4. A. James, 1984. Principle of wildlife management, Bailly, John Wiley & Sons Inc., New York.
5. Raymond F. Dasmann, 1982. Wildlife Biology. IInd edition, Wiley Eastern Limited, New Delhi.
6. Manideep Raj, 2012. Wildlife Ecology and Management. Assam Book Depot, Guwahati.
Practicals:
1. To study the basic laboratory rules and tools to work in a microbiology laboratory.
2. To study principles and uses of types of microscopes available in laboratory.
3. To study the principles, working and uses of important equipments used in microbiology and pathology
experiments.
4. To familiarize with staining techniques for important group of microorganisms.
5. Calibration of microscope and measurement of microorganisms at 10X and 40X magnifications.
6. Study of disease symptoms caused by different group of tree/plant pathogens.
7. To characterize and identify different group of tree/plant pathogens: Preserved samples
8. To characterize and identify different group of tree/plant pathogens: Permanent slides.
7
9. Identification and characterisation of parasitic flowering plants affecting forest/plantation crops.
10. Study of a few diseased tree/plant samples to identify pathogen.
11. Collection, preservation and herbarium preparation of diseases tree/plant samples with their identification.
Recommended Books:
1. Tree Diseases Concepts, by Paul D. Manion, Prentice-Hall, Inc., New Jersey, USA, 2nd Edition, 1990.
2. Principles of Forest Pathology, by F.H.Tainter and F.A. Baker, Hohn Wiley & Sons, Inc., New York, USA, 1st
Edition, 1996.
3. Microbiology, by M. J. Pelczar, E.C.S. Chan and N.R. Krieg, Tata McGraw Hill Pub. Co, Ltd., 1986.
4. Insect pest management: Techniques for environmental protection by Jack E. Rechcigl and Nancy A. Rechcigl,
Ann Arbor Press Chelsea, Michigan
5. Diseases of Trees and Shrubs, by Sinclair, W.A., Lyon, H.H. and Johnson, W.T. Cornell University Press, 1987.
6. Field and laboratory guide to tree pathology by Blanchard, R.O. & Tattar, T.A. New York, USA, Academic
Press, 1997.
7. Forest health: Its assessment and status, by J. Innes. Wallingford, UK, CAB International, 1995.
8. Plant Pathologist’s Pocket book, by J.M. Waller, J.M. Lenné & S.J. Waller. Wallingford, UK, CABI
Publishing. 3rd edition, 2001.
9. Decline and dieback of trees and forests. W.M. Ciesla & E. Donaubauer. FAO Forestry Paper 120, Rome, 1994.
10. Tree Pests and Diseases: An Arborists’ Field Guide by Guy Watson, Arboricultural Association, 2013.
11. Diagnosis of Ill-Health In Trees, by R.G. Strouts, T.G. Winter, Forestry Commission, TSO, 2nd Edition, 7th
Impression, 2013.
Practicals:
1. To study the different types of microscope
2. To prepare different types of solutions, reagents and stains required for fixation, preservation and
staining of plant materials.
3. Sectioning and staining of different plant parts with single stain.
4. Sectioning and staining of different plant parts with double stain.
5. To study maceration of plant material.
6. To measure different types of cells under microscope.
7. To measure diameter and girth of logs with callipers and tapes
8. To determine the conversion factor of different tree species.
9. To study different types of crown shapes
10. To measure the height of trees with ocular method.
11. To measure the height of trees with shadow method.
12. To measure the height of trees with single pole method.
13. To measure the height of trees with Ravi Altimeter.
14. To measure the height of tree with Christen’s hypsometer.
15. To determine the volume of logs with different formulae.
8
Recommended Books:
1. Forest Mensuration, A.N. Chaturvedi and L.S. Khanna, IBD, Dehra Dun, 1994.
2. Techniques in Forestry, P. Shanmughavel, Pointer Publishers, Jaipur 2003.
3. Biomass studies: Field methods for monitoring biomass. S. Ravindranath and S. Premnath Oxford & IBH
publishers, New Delhi, 1997.
4. Forest Measurements. T. F. Avery and H. E. Burkhart, McGraw Hill Inc, New York, 1994.
Practicals:
1. To prepare layout of nursery and preparation of different type of nursery beds.
2. Soil working and sterilization.
3. Raising of stocks- sowing of seeds and cuttings in nursery beds
4. Pre-sowing treatment of seeds and cuttings,
5. Collection and storage of seeds,
6. Study of different types of seed germination techniques,
7. To conduct regeneration survey
8. Study of some exotic species
9. Visits to various nurseries
Recommended Books:
1. Seed physiology of development and germination Bewely, J.D and Black, M. 1985.
2. Propagation of tropical and sub tropical. Horticultural crops. Bose, T.K, Mitra, S.K. and Sadhu, M.K., Naya
Prakash, Calcutta 1986
3. Plant propagation – principles and practice prentice Hartmann, H.T and Kester, D.E. Hall of India Private
Limited, New Delhi. 1968.
4. A Text Book of Silviculture, A.P. Diwedi, International Book Distributors, Dehradun, 1993.
5. Principles and Practices of Silviculture, S.S. Negi, International Book Distributors, Dehradun, 1988.
10
Unit III Account of some high value medicinal plant including identifying characters, 6 Lectures
distribution, uses and their chemical contents-Aconite, Aonla/amla, Coptis, Cinchona,
Bahera, Harida, Neem, Pipali, Sarpagadha, Satamula, Tinospora, Taxus,Vasak etc.; Lower
plants (bacteria, algae and fungi) as source of medicine.
Unit IV Major chemical contents and uses of some Aromatic plants- Achorus, Agaru, Citronella, 6 Lectures
Cinnamomum, Dill, Eucalyptus, Mint, Patchouli, Rose, Sandal wood, Vetiver, Vanilla,
Illicium etc.
Unit V Cultivation methods of important MAP; Conservation of endangered MAP; Role of AYUSH, 5 Lectures
NMPB & SMPB in cultivation and conservation of MAP
Practicals:
1. Collection, characterization and identification of medicinal and aromatic plants available in and around
NERIST campus.
2. To prepare the herbarium sheets of some important medicinal and aromatic plants.
3. Study of properties of some essential oils, perfumery products and their sources.
4. Study of properties of some pharmaceutical products of plant origin.
5. Preparation of nursery beds for medicinal and aromatic plants.
6. Study of cultivation practices of important aromatic plants and growing in forest nursery.
7. Study of cultivation practices of important aromatic plants and growing in forest nursery.
8. Study of antibiotic producing microorganisms and drugs obtained from lower plants.
9. Field visits.
Recommended Books:
1. Glossary of Indian medicinal plants. Chopra, R.N., Nayar, S.L. and Chopra, I.C. CSIR, New Delhi 1956.
2. Medicinal Plants: Conservation, Cultivation and Utilization. Chopra, A.K. Daya Books. 2007.
3. Medicinal and aromatic plants (1st Ed). Muralia, S. (2006).Neha Publishers & Distributors.
4. Medicinal and Aromatic Plants of India ; Herbal Wealth for Human Health (1st Ed). Khan, I.A. and Khanum,
A. Ukaaz Publications. 2005.
5. Handbook of Medicinal Plants, S.K. Bhattacharjee, Scientific Book Supplier, 1996.
6. Handbook of Aromatic Plants, S.K. Bhattacharjee, Sceintific Book Supplier, 1996.
7. Aromatic Plants Cultivation, Processing and Uses, H. Panda, Delhi, Asia Pacific Business Press, 2004.
8. Cultivation and utilization of medicinal plants- Atul, C.K. and Kapur, B.K. , RRL, CSIR, Jammu-Tawi 1982.
Recommended Books:
1. Forest Protection, L.S. Khana, Khanna Bandhu, Dehradun, 1982.
2. Forest Protection, S.S. Negi, Bishen Singh Mahendra Pal Singh, Dehradun, 1983.
3. Indian Forest, Siol, Water, and Bio-environment conservation, Sheelwant Patel, Pointer Publishers, Jaipur,
India, 2005.
4. Forest and Forestry, D.A. Anderson and I.I. Holland, the Interstate Printers & Publishers, INC., Danville,
Illinois, 1982.
5. Tree Diseases Concepts, by Paul D. Manion, Prentice-Hall, Inc., New Jersy, USA, 2nd Edition, 1990.
6. Principles of Forest Pathology, by F.H.Tainter and F.A. Baker, Hohn Wiley & Sons, Inc., New York, USA, 1st
Edition, 1996.
12
Unit IV Wildlife health management; Management of wildlife decimating and welfare factors, 8 Lectures
Legal aspects of Wildlife management: Evolution of wildlife laws in India, Wildlife
(Protection) Act 1972 and their amendments; Government and Voluntary organization
involved in wildlife conservation & management: IUCN, CITES, WCS, BNHS, IBCN, ZOO
OUTREACH, WWF, WTI, WII, etc.
Unit V Wildlife Protected Areas: Definition & concept of protected area, Legal aspects of 8 Lectures
creation of PAs, Classification of PAs, Protected area of India, Development of zoning in
PAs & their application, Management plans and measures of PAs, Advance techniques
in wildlife research and management in PAs. Man- wildlife conflicts.
Practicals:
1. Study of wildlife population estimation techniques-direct methods.
2. Study of wildlife population estimation techniques- indirect methods.
3. Study of methods of feeding habit and behaviour of wild animal species.
4. Study of tools/equipments used in wild animal population and behaviours studies.
5. Study of ecological parameters of wildlife habitat.
6. Field visit National Parks/Wildlife Sanctuary/Zoological garden for study of management practices of
selected endangered / rare wildlife species.
7. Study of methods of estimation of human-wildlife conflict and wildlife damages and techniques to control
them.
8. Study of tranquilization techniques, health care & disease management of wild animals.
9. Quantitative methods of sampling animal behaviour.
10. Study of management measures taken for conservation and protection of threatened wildlife species in
protected areas of north-east India.
Recommended Books:
1. Wildlife Biology, Raymond F. Dasmann, IInd edition, Wiley Eastern Limited, New Delhi. 1982.
2. Fundamental of Wildlife management, Rajesh Gopal, Justice Home Publication, Allahabad, 1993
3. Concept of wildlife Management, B.B. Hosetti, Daya Publishing House, New Delhi, 1997.
4. Preservation of wildlife in India, A.A. Dunbar, Daya Publishing House, New Delhi, 1988.
5. Text book of wildlife management, S.K. Singh, IDBC publishers, Lucknow, 2005.
6. Wildlife Ecology and Management. Manideep Raj, Assam Book Depot, Guwahati.2012
7. Principle of wildlife management, James A. Bailly, John Wiley & Sons Inc., New York, 1984.
8. Managing Protected Areas in the Tropics, John and Kathy Mackinnon, Graham Child and Jim Thorsell,
Natraj Publication, Dehradun, 1986.
9. Essentials of Conservation Biology, R.B. Primack, Sinauer Associates Inc. Publishers, Sunderland,
Massachusetts, U.S.A., 1993.
Recommended Books:
1. Forest Ecology, J.P. Kimmins, 2 Edn., Prentice and Hall, New York., 2004.
2. Ecology and Environment, P.D. Sharma, Rastogi Publication, Meerut, 2007.
3. Ecology, Environment and Resource Conservation, J.S. Singh, S.P. Singh and S.R. Gupta, Anamya Publication,
New Delhi, 2006.
4. A Text Book of Plant Ecology, R.S. Ambasht and N.K Ambasht, CBS Publ., New Delhi, 2006.
5. Fundamentals of Ecology, E.P. Odum, Natraj Publishers, Dehradun, 1996.
6. Forest Ecology. (3 vols.), Puri et al., Oxford and IBH Publication, New Delhi, 1989.
7. Forest types of India by Champion and Seth, 1968, FSI Dehradun.
Recommended Books:
1. Theory and Practices of Silvicultural system, Ram Prakash and L.S. Khanna, International Book Distributors,
Dehradun, 1991.
2. Silviculture, Josef Costler, International Book Distributors, Dehradun, 1990.
3. Forestry in India, A.P. Diwedi, International Book Distributors, 1993.
4. The Practice of Silviculture, D.M. Smith, EBD Education Press, Dehradun, 1989.
14
Recommended Books:
1. Applied ethnobotany: People, Wild Plant Use and Conservation, Anthony B. Cunningham. Earthscan
Publication, London, 2001.
2. Ethnobotany: A Methods Mannual, Gary J. Martin, Champion & Hall London, 1995.
3. A handbook of Ethnobotany: S. K. Jain & V. Mudgal, BSMPS, Dehradun, 1999.
4. Tribal India: N. Hasnain, Palaka Prakashan, Delhi. 1994.
5. Tribal Development in India:R. K. Sahoo, Mohit Publication, New Delhi, 2005
6. Indian Anthropology: N. Hasnain, Palaka Prakashan, Delhi. 1989.
7. Anthropology (7th Edn): C. R. Ember and M. Ember, Prentice Hall of India. 1994
Practicals:
1. Study of seed morphology of various forest seeds and their identification
2. Seed collection from natural stands, plantations and seed orchards
3. Drying and extracting seeds
4. Cleaning and upgrading
5. Storage application
6. Methods of breaking seed dormancy
7. Sampling of seeds for quality evaluation
8. Evaluation of purity and weight of seed
9. Seed protection methods
10. Germination tests.
Recommended Books:
1. Forest Seed, P. Khullar et al, ICFRE, Dehradun, 1991.
2. Forest Tree Seed, S.S. Negi, IBD, Dehradun, 1998.
3. Forest Tree Seed & Nursery management, V. Singh and S.K. Lavonia (eds), BSMPS Dehradun, 2003.
4. Seed Science & Technology, A.K. Joshi and B.D. Singh, Kalyani Publisher, 2003.
5. An introduction to tree seed technology, R. Umarani and K. Vanangamudi, IBD, Dehradun, 2004.
6. Advances in Seed Science and Technology: Recent Trends in Seed Technology and Management :
K Vanangamudi, Agrobios, Jodhpur 2006
7. Seed Legislations in India, K. Ramamoorthy, Agrobios, Jodhpur 2006.
Practicals:
1. Study of important climate & soil variables that influence tree survival and growth.
2. Rapid tests for seed viability, seed germination per cent, germinative capacity and germinative energy
3. Different methods for artificial regeneration of trees.
4. Field visits for study and identification of trees in adjoining areas of the campus and in natural &
plantation stands of the region.
16
Recommended Books:
1. Silviculture of Indian Trees, S.S. Negi, Bishen Singh Mahendra Pal Singh, Dehradun, 1985.
2. Propagation Practices of Important Indian Trees, Ram Prakash, IBD Dehradun, 1991.
3. Silviculture of Indian Trees, R.S. Troup, International Book Distributors, Dehradun, 1986.
Practicals:
1. To prepare different fixatives, preservatives and stains
2. To macerate wood with different methods.
3. To prepare temporary slides for study of wood elements.
4. Preparation of permanent slides by using safranine and fast green stains.
5. Preparation of permanent slides by using safranine and haematoxylin stains.
6. To study different types of simple tissues like parenchyma, collenchymas and sclerenchyma.
7. To study gross features of wood.
8. To study softwood in three planes.
9. To study types of axial parenchyma in hardwoods.
10. To study ray composition in hardwoods
11. To study porosity in hardwoods.
12. To study special features of wood like spiral thickenings, bas of sanio, scalloped torus, types of pits etc.
13. To study anomalous secondary growth
Recommended Books:
1. The anatomy of wood, its diversity and variability, K. Wilson and D. J. B. White, Stobart and sons Ltd.
London, 1986.
2. Plant Anatomy, K. Esau, Wiley Eastern Ltd., New Delhi, 1993.
3. Wood Anatomy and major uses of wood, M.N.B. Nair, Selangor D. E. Malaysia,1998.
4. An introduction to plant anatomy, A.J. Eames and L H. MacDanials, Tata McGraw Hill, New Delhi, 1999.
5. A textbook of Wood Science and Technology, A.J. Panshin, and C. de Zeuuw, McGraw Hill Book Company,
New York, 1980.
Practicals :
1. To measure diameter of trees with callipers.
2. To measure diameter and girth of logs with callipers and tapes
3. To measure diameter of logs and stumps with wooden scale.
4. To determine the conversion factor of different tree species.
5. To determine the thickness of bark with Sweedish bark gauge.
6. To determine D. U. B. And G. U. B. Of different trees.
7. To measure the height of trees with ocular method.
8. To measure the height of trees with shadow method.
9. To measure the height of trees with single pole method.
10. To measure the height of trees with Ravi Altimeter.
11. To measure the height of tree with Christen’s hypsometer.
12. To determine the volume of logs with different formulae.
13. To estimate the volume of standing trees with different methods.
14. To estimate the age of trees with different methods
Recommended Books:
1. Forest Mensuration, A.N. Chaturvedi and L.S. Khanna, International Book Distributors, Dehradun, 1994.
2. Forest Measurements, T.F. Avery and H.E. Burkhart, McGraw Hill Inc, New York, 1994.
3. Forest Mensuration, B. Husch, C.I. Miller and T.W. Beers, J Wiley & Sons, New York, 1982.
Tutorial classes:
To apprise the students about the practical application of basic concepts in breeding by solving numerical
problems.
Recommended Books:
1. Applied Forest Tree Improvement, B. Zobel and J. Talbert, John Wiley & Sons New York, 1984.
2. Introduction to Forest Genetics, J.W. Wright, Academic Press, 1976.
3. Forest Genetics and Tree Breeding, Mandal and Gibson, BSMS Publishers & Distributors, Dehradun, 1999.
4. Plant Breeding, B.D. Singh, Kalyani Publisher, 1990.
5. Principles of plant breeding, R. W. Allard, John Wiley and Sons, Inc New York 1960.
6. Forest Tree Improvement: The Third Decade, BA, 24TH Thielges, Annual Forestry Symposium, Lousiana State
University. Baton, Rouge, La, 1975.
Practicals:
1. To study colour, lustre and grain of woods.
2. To determine moisture contents of wood.
3. To determine the specific gravity /density of wood.
4. To study morphological and anatomical characteristics of compression wood.
5. To study morphological and anatomical characteristics of tension wood.
6. To study different types of natural defects in woods.
7. To study different types of seasoning defects in woods.
8. To study types of fungal defects and borers in woods.
9. To study end uses of local timbers.
10. To study different methods of stacking of timbers.
11. To study different types of kilns.
12. To study types of sheds for stacking timbers.
13. To study sap displacement methods of wood preservation.
14. To study hot and cold process of wood preservation.
Recommended Books:
1. Wood Science and Technology, S.S. Negi, IBD, Dehradun, 1997.
2. Wood Seasoning Technology by C.N. Pandey and V.K. Jain, ICFRE, 1992
3. Wood Preservation Manual by F.A.O. (Reprinted) IBD Dehra Dun, 1986
4. A hand book of Forest utilization, T. Mehta, IBD Dehradun, 1989
5. A textbook of Wood Science and Technology, A.J. Panshin, and C. de Zeuuw, McGraw Hill Book Company,
New York, 1980.
20
6. The Indian Forest Utilisation Vol. I&II, Anons, ICFRE, Dehradun, 1971.
7. Forest Products & Wood Science-An Introductin. J.L., Bowyer, R. Shumulsky and J.G. Haygreen, Iowa state
press, 2003.
Recommended Books:
1. Forests: The Non-wood Resources, A.P. Dwivedi, International Book Distributors, Dehradun, 1993.
2. A hand book of Forest utilization, T. Mehta, IBD, Dehradun, 1989.
3. Timber Industries and Non Timber Forest Products, M.B. Shrivastava, CBS Publishers and Distributors,
New Delhi, 2005
4. Composite Woods - Research and Development, K.S. Shukla, and S P. Singh, ICFRE- Dehradun, 1994.
5. Forest products and their utilization, S.S. Negi, IBD, Dehradun,
6. Minor Forest Products of India, T. Krishnamurty, Oxford & IBH Publications, Co. Ltd, New Delhi, 1993.
7. Forest Products & Wood Science-An Introduction, J.L. Bowyer, R. Shumulsky and J.G. Haygreen, Iowa state
press, 2003.
Recommended Books:
1. The Indian Forest Act 1927 along with Forest Conservation Act 1980, Natraj Publishers, Dehradun, 1998.
2. Handbook of Environment, Forest & Wildlife Protection Laws in India, Natraj Publishers, Dehradun, 1988.
3. Negi, S.S. 1997. Forest Policy and Law, , International Books Distributors, Dehradun.
4. Shetty, B.J. 1981. A Manual of Law for Forest Officers, , Sharada Press, Mangalore.
5. Singh, C. 2000. India Forest Policy & Forest Law. Natraj Publishers, Dehradun.
21
FR 6101 Forest Management & Working Plan : 4 Credits (3-1-0)
Unit I Definition of Forest Management: Scope and Importance, Principles of Forest 8 Lectures
Management; Classification of Forest: Functional, Geographical, Ecological, Legal and
Territorial.
Unit II Administrative (Organisational) classification: Management (Silvicultural 8 Lectures
classification) viz. Working circle, Felling Series, Coupe, Cutting Section, Periodic Blocks,
Felling Cycle and Felling Series in Coppice with Standards system; Factors governing
normality; Monoculture vs Polyculture plantation.
Unit III Sustained yield: Importance and definitions; Sustainable Forest Management : criteria 9 Lectures
and indicators; Rotation, Increment percentage, Normal forest, Basic factors of
normality, Kinds of abnormality in regular and irregular forests.
Unit IV Growing stock: Concept, Determination by different methods, Concept of Flurry’s constant 9 Lectures
& reduction factor; Yield regulation
Unit V Working Plan: Definition and importance, Working Plan Code, Methods of preparation 8 Lectures
of working plans and their uses. Forest maps, their types, methods of preparation and
uses. Joint Forest Management
Recommended Books:
1. Ram Parkash. 1986.Forest Management. International Book Distributors , Dehradun.
2. Recknagel, A.B. and Bently, J. 1985. Forest Management, International Books Distributors, Dehradun.
3. Forest Working Plan, S.S. Negi, Bishen Singh Mahendra Pal Singh, Dehradun, 1988.
4. Working Plan Code 2014. MoEF, New Delhi.
5. Latest Working Plan of any Forest Division.
6. Higman, S., Mayers, J., Bass, S., Judd, N. and Nussbaum, R. 2006. The Sustainable Forestry Hand Book.
Earthscan, London.
Tutorial:
1. In tutorial, audio/video programme will be shown to students related to forest management and natural
resource management.
2. Field visits will be arranged to working plan circles
22
FR 6103 Soil Science & Management : 4 Credits (3-0-2)
Unit I Concepts of soil and soil science; Nature and importance of forest soils: Genesis of 9 Lectures
forest soils; Weathering-physical, chemical and biological; Associated weathering
processes; Soil profile development; Forest floor and forest litter; Soil taxonomy-
classification and identifying characteristics. Comparative account of forest and arable
soils. 9 Lectures
Unit II Physical, chemical and biological properties of forest soils; Soil texture, bulk density,
porosity and soil water; Soil pH and colloids; Cation exchange capacity-properties and
importance; Soil organisms -functional groups and their distribution; Humus and humic
substances-synthesis, degradation and importance; Soil organic matter -nature,
properties and importance. 8 Lectures
Unit III Fertilizer and nutrient management in forest soils; Organic and inorganic fertilizers;
Biofertilizers-N-fixation, mycorrhizae and P-solubilizers; Dominant nutrients in forest
soils-sources and availability; C/N ratio and its importance in litter decomposition. 8 Lectures
Unit IV Forest soil survey-requirement, technique and report; Productivity of forest soils-site
index, site quality and criteria for estimation. Soil and tree planting; Silvicultural
cutting and forest soil. 8 Lectures
Unit V Management of problem soils: Soil erosion and management; Acid and saline soils-
causes, properties and management, Reclamation of surface mined soils and
wastelands. Shifting cultivation-effects and management.
Practicals:
1. To collect, process and storage of soil samples for laboratory analysis
2. To determine the moisture content of soil samples by gravimetric method
3. To measure pH of soil sample using digital pH meter
4. To determine soil organic carbon (OC) content of soil samples using wet acid oxidation and titration
method
5. To prepare soil samples for nutritional analysis by wet acid oxidation method
6. To determine total nitrogen (TN) content of soil samples using Kjeldahl distillation method
7. To determine total phosphorus (TP) content of soil samples spectrophotometric (colorimetric) method
8. To determine available nitrogen (ammonium and nitrate-N) content of soil samples by steam distillation
method
9. To study the soil profiles of a forest and grassland
10. To isolate and identify N2- fixing bacteria from soil
11. To Isolate and identify mycorrhizal fungi from soils
12. To visit different forests to study soil types and profiles
Recommended Books:
1. Text book of soil Science by Mehta, R.K. (2011), ICAR, New Delhi
2. Forest Soils and Forest Growth, Wilde, S.A. (1946), Indian Reprint (1994.) Bishen Singh Mahendra Pal
Singh, Dehra Dun,
3. Nature and Properties of Soils (14th Edition) by Brady, N.C. and R. W. Ray (Author) (2007), Prentice Hall,
New York.
4. Laboratory Methods of Soil and Plant Analysis: A Working Manual, Okalebo, j.R., Gathua, K.W. and Woomer,
P.L. (1993), Soil Science Society of East Africa Technical Publication No.1, Marvel EPZ (Kenya) LTD, Nairobi,
Kenya.
5. Chemical Analysis of Ecological Materials, Allen, S.E, Grimshaw, H,M, Parkinson, J,A. and Quarmby, C.
(1974), Blackwell Scientific Publications, Oxford, 565p.
6. Ecology and Management of Forest Soils (4th Edition) by Binkley, D. and Fisher,R. (2013), John Wiley &
Sons, USA.
7. Soil Survey Manual-USDA Handbook No. 18 by Soil Survey Division Staff (1993), Indian Reprint (2004),
Scientific Publishers (India)
8. Soils, An Introduction to Soils and Plant Growth, Miller, R. W. and Donajue, R. L (1990) Prentice Hall Inc.
9. Soil Ecology by Lavelle, P and Spain, A.V. (2007), Springer Science & Business Media
10. Soils and Soil Fertility (6th Edition) by Toeh, F.R. and Thompson, L.M. (2008), Wiley India Pvt. Ltd.
23
FR 6104 Rangeland Management : 3 Credits (2-0-2)
Unit I Range management: Definition, objective and value, Man made and natural rangeland, 6 Lectures
Rangeland in different biomes of the world & their characteristics Environmental factors
determining the rangelands; Rangeland management issues.
Unit II Grassland types and grassland cover of India, Cultural practice for improving grassland 6 Lectures
area. Grazing system and management, Design and layout of grazing systems; Grazing
management
Unit III Impact of uncontrolled grazing; Assessment of fodder resources; National forest policy 5 Lectures
on grazing; Grazing rights and concessions in different states of India.
Unit IV Pasture establishment: Rangeland seeding, Choice of species, Methods of seeding, 5 Lectures
Ecology and cultivation techniques of important grass species with reference to
northeast India- Brachiaria mutica, Cenchrus ciliaris, C. setigerus, Cynodon dactylon, Sehima
nervosum, Pennisetum pedicellatum, Dichanthium annulatum, Panicum antidotale, Chloris
gayana, Panicum maximum, Sorghum sudanense.
Unit V Rangeland protection: Types of enclosures, effect of closure; Rangeland management: 6 Lectures
Tools of rangeland management, Wildlife & rangeland-interaction and competition,
Rangeland productivity improvement - control of undesirable vegetation, burning,
fertilization, soil and water conservation and protection; erosion control in rangeland.
Practicals:
1. Study of types, categories and characteristics of rangeland plant community.
2. Assessment of plant diversity/vegetation composition of selected rangeland area.
3. Identification of rangeland condition and management issues of selected rangeland area for improving
the quality of rangeland.
4. Study the feeding habit and grazing behaviour of range animal to know the food plants and preference of
rangeland area.
5. Identification and quantifying the food plants of range animal in selected rangeland area.
6. Identifying the soil condition of rangeland area to support rangeland plant growth and forage management
7. Assessment of rangeland animal population and diversity with special emphasis to threatened range
animals.
8. Study of current health status of selected rangeland area.
9. Study the indigenous techniques used by local people for management of their rangeland area.
10. To study the factors those affect the rangeland health condition.
Recommended Books:
1. Range management: Principles and Practices (6th Edition) by Jerry L. Holecheck, Rex D. Pieper, Carlton H.
Herbel, Prentice Hall, 2010.
2. Principle and practice of rangeland management, J.B. Lal, International Book Distributors, Dehradun,
1990.
3. Rangeland and pasture management by Arthur W. Sawpson, John Wiley & Sons Inc,1923.
4. Grazing systems planning guide by Kevin Blanchet, Howard Moeching and J. Dejong-Hughes, USDA, Natural
Resource Conservation Science,2003.
5. Rangeland Ecology and Management by Harold Heady and R. Dennis Child, Westview Press, 1999.
6. Range management by Laurene Alexander Stoddar, Arthur D. Smith, Megraw Hill, 1943.
24
Practicals :
1. To study different methods of sawing of timbers.
2. To study different types of tools used for felling of trees.
3. To study operation and maintenance of power chain saw.
4. To study operation and maintenance of circular saw.
5. To visit felling sites
6. To study different types of wood working tools
7. To study different types of postures in nursery and planting activities
Recommended Books:
1. A hand book of Forest utilization, T. Mehta, IBD, Dehradun, 1989.
2. Indian Forest Utilisation Vol. I & II, Anons, ICFRE, Dehradun, 1971.
3. Logging and transport in steep terrain. Via delle terms of Caracolla, 0010 FAO, 1993
4. Introduction To Ergonomics In Forestry In Developing Countries, FAO,1992.
25
Department of Agricultural Engineering
Programme: Degree in Agricultural Engineering
Year Bridge Lateral Entrants (10+2 Diploma) to Degree Module
Semester I
S.N. Course Code Course Title L T P Credit
1 HS4301 Elements of Economics 3 0 0 03
2 CY4301 Comprehensive Chemistry 4 0 2 05
3 MA4301 Comprehensive Mathematics-I 3 1 0 04
4 PH4301 Comprehensive Physics 4 0 2 05
5 ES4377 Comprehensive Programming in C/C + + (Audit) 2 0 4 04
6. AE4301 Mechanics of Granular Materials 3 0 2 04
Total 17+2 1+0 6+4 21+4
Semester II
S.N. Course Code Course Title L T P Credit
1 HS4401 Comprehensive Communication Skill 2 0 2 03
2 MA4401 Comprehensive Mathematics-II 3 1 0 04
3 AE4401 Comprehensive Fluid Mechanics 3 0 2 04
4 AE4402 Basics of Thermodynamics and IC Engines 3 1 0 04
5 AE4403 Post Harvest Engineering 3 0 2 04
6 AE4404 Farm Power and Machinery 3 0 2 04
7 AE4405 Elementary Soil and Water Conservation Engineering 3 0 2 04
Total 20 2 10 27
Year I
Semester I
S.N. Course Code Course Title L T P Credit
1 CY5101 Applied Chemistry – I A (AE) 2 0 2 03
2 MA5101 Engineering Mathematics – III (AE) 3 1 0 04
3 ME5121 Machines Theory 3 1 0 04
4 AE5101 Transfer Processes in Food Engineering 3 1 0 04
5 AE5102 Water Well and Pump Engineering 3 1 0 04
6 AE5103 Renewable Sources of Energy 3 0 2 04
7 AE5104 Hydrology and Watershed Management 3 1 0 04
Total 20 5 4 27
Semester II
S.N. Course Code Course Title L T P Credit
1 MA5202 Probability & Statistics (AE/ECE/CS/EE) 3 1 0 04
2 AE5201 Machine Design 3 1 0 04
3 AE5202 Unit Operations in DFE 3 1 0 04
4 AE5203 Farm Machinery – II 3 0 2 04
5 AE5204 Irrigation and Drainage Engineering - II 3 1 0 04
6 EE5220 Elements of Instrumentation & Process Control 3 0 2 04
Total 18 4 4 24
AE5205* Forest Hydrology and Soil & Water Conservation Engg. 3 0 2 04
*For Forestry BSc Third Year students.
Year II
Semester I
S.N. Course Code Course Title L T P Credit
1 ME6121 Theory of Refrigeration and Air-conditioning 2 0 0 02
2 AE6101 Farm Power – II 3 0 2 04
3 AE6102 Food Process Technology 3 0 2 04
4 AE6103 Command Area Development 3 0 0 03
5 AE60** Elective – I 3/3 0/1 2/0 04
6 **60** Open Elective 3 0 0 03
7 AE6199 Project (Part – I) 0 0 4 02
8 AE6179 Industrial Training (Audit) 0 0 0 02
Total 17/17 0/1 10/8 22+2
26
Semester II
S.N. Course Code Course Title L T P Credit
1 HS6203 Agri Business Management 2 1 0 03
2 AE6201 Design of Soil Conservation Structures 3 1 0 04
3 AE6202 Farm Produce and Storage Engineering 3 0 2 04
4 AE60** Elective – II 3/3/2 0/1/0 2/0/4 04
5 AE60** Elective – III 3/3/2 0/1/0 2/0/4 04
6 AE6299 Project (Part – II) 0 0 8 04
7 ED6288 Extra-Curricular Activities and Discipline 0 0 0 02
Total 14/14/12 2/4/2 14/10/18 23+2
Elective – I L T P C
AE6001 Remote sensing and GIS for Land and Water Management 3 0 2 4
AE6002. Agricultural Meteorology and Climate Change 3 1 0 4
AE6003 Processing of Milk and Milk Products 3 1 0 4
AE6004 Food Plant Utilities and Sanitation 3 1 0 4
AE6005 Testing of Tractors and Farm Equipment 3 0 2 4
AE6006 Tea Plantation Machinery 3 1 0 4
Open Elective
(to be offered by other departments)
COURSE CONTENTS
27
AE4401 Comprehensive Fluid Mechanics: 4 Credits (3-0-2)
Unit 1 Definition and properties of fluids, units of measurement, fluid statics, pressure at a point 12 lectures
and its measurement, fluid static forces on submerged surfaces, buoyancy, condition of
flotation and stability of submerged and floating bodies.
Unit 2 Kinematics of fluids, Lagrangian and Eulerian description of fluid motion, stream lines, path 6 lectures
lines, streak lines, types of fluid flow: translation, rotation, circulation and vorticity,stream
function, velocity potential and flow net.
Unit 3 Dynamics of fluid: transport theorem, conservation laws, equations of continuity, Euler’s 8 lectures
equation of motion, Bernoulli’s equation ,viscous flow.
Unit 4 Internal flow: laminar and turbulent flow in pipes, general equations for head loss Darcy- 8 lectures
Weisbach and Fanning’s equation
Unit 5 Dimensional analysis and similitude: Raleigh’s method and Buckingham pipe theorem, types 8 lectures
of similarities, dimensional analysis, dimensionless numbers.
Recommended Books:
1 Fluid Mechanics, V.L. Streeter and E.B. Wylie, McGraw Hill Book Co., Singapore, 1983.
2 Hydraulics and Fluid Mechanics, P.N. Modi and S.M. Seth, Standard Book House, Delhi, 1999.
3 Fluid Mechanics & Hydraulic Machines, R.K. Bansal, Laxmi Publication Pvt. Ltd., New Delhi, 2000.
4 A Text Book of Hydraulics, Fluid Mechanics and Hydraulic Machines, R.S. Khurmi, S. Chand and Company, New
Delhi, 2000.
5 Fluid Mechanics including Hydraulic Machines, A. K. Gupta, Khanna publishers, New Delhi, 2006.
Recommended Books:
1 Land and Water Management Engineering, V.V.N. Murthy, 2nd Ed., Kalyani Publishers, Ludhiana, 1985.
2 Introductory Soil and Water Conservation Engineering, B.C. Mal, Kalyani Publishers, Ludhiana, 1995.
3 Irrigation Theory and Practice, A.M. Michael, second revised and enlarged edition, Vikas Publishing House, New
Delhi, 2008.
4 Soil and Water Conservation Engineering, R.Suresh, 2nd Ed., Standard Publishers Distributors, Delhi, 1997.
Unit 2 Fertilizer applicator: Types of metering device, factors affecting discharge rate and uniformity. 7 lectures
Harvesting equipment: Cutting pattern and force analysis of conventional cutter bar.
31
Unit 3 Combine harvester: Functions, construction and working principles, types, performance
9 lectures
parameters. Harvesting machines for potato, groundnut and maize.
Unit 4 Chaff cutter: Manual and power operated, chopping cylinders, capacity and energy
7 lectures
requirement. Importance of hay conditioning, methods of hay conditioning, and calculation
of moisture content of hay.
Unit 5 Performance evaluation of tillage implements, sowing and planting equipment, plant protection
9 lectures
equipment, harvesting and threshing equipment.
Recommended Books:
1 Principles of Farm Machinery, R.A. Kepner, Roy Bainer and E.L. Berger, 1stEd., CBS Publishers and Distributors,
New Delhi, 1987.
2 Farm Machinery and Maintenance, H.P. Smith and L.H. Wilkis, 6thEd., Tata McGraw Hill Publishing Co. Ltd. New
Delhi, 1986.
3 Principles of Agricultural Engineering, Vol.-I, A.M. Michael and T.P. Ojha, 3ndEd., Jain Brothers, New Delhi, 1978.
Unit 2 Traction mechanics,Traction parameters, factors affecting traction performance, weight 8 lectures
transfer, traction prediction models.
Unit 3 Drawbar performance, ballasting, determination of centre of gravity and moment of inertia of 8 lectures
tractor.Tractor-implement matching.
Unit 4 Hydraulic system: Components such as pump, valve, actuator; working principle, Symbols, 10 lectures
flow circuit, automatic draft control system, automatic position control system, Power steering.
Unit 5 Tractor test codes and standards, engine and drawbar performance tests, hydraulic power 6 lectures
and lifting capacity tests.
Recommended Books:
1 Tractor and their Power Units, J.B. Liljedahl, W.M. Carleton, P.K. TurnquistandH. Makoto, 4thEd., CBS Publishers
& Distributors, New Delhi, 1997.
2 Off-Road Vehicle Engineering Principles, Carroll E. Goering, Marvin L. Stone, David W. Smith and Paul K. Turnquist,
American Society of Agricultural Engineers, Michigan, 2003.
3 Engine and Tractor Power, Carroll E. Goering and Alan C. Hansen, American Society of Agricultural Engineers,
Michigan,2004.
4 The Mechanics of Tractor - Implement Performance, R. H. Macmillan, University of Melbourne,2002, Printed from:
http://www.eprints.unimelb.edu.au.
33
Unit 3 Types and functional requirements of storage structures. Grain pests and rodents control. 8 lectures
Pressure theory in grain storage. Grain flow behviour in storage structure. Aeration and
fumigation in storage structure. Scheduling of aeration.
Unit 4 Design features of various storage structures: controlled atmospheric storage, modified 6 lectures
atmosphere storage, cold storage and frozen storage. Management of cold storage.
Unit 5 Material handling: Application, conveyer, elevator. Design concept 6 lectures
Recommended Books:
1 Food Engineering and Dairy Technology, H.G. Kessler, Freising, West Germany: Verlag A. Kessler, 1981.
2 Handling and Storage of Food Grains, Food and Agriculture Organization of the U.N., Rome, 3rd Ed., Oxford IBH
Pub. Co. Pvt. Ltd., New Delhi, 1980.
3 Storage of Potatoes, A. Rastovski and A.J.H. Van Es, International Book Distribution, Deharadun, 1989.
4 The Technology of Food Preservation, N.N. Desosier and J.N. Desosier, 4th Ed., CBS Publishers and Distributors,
New Delhi, 1987.
5 Preservation and Storage of Grains, Seeds and their Bye Products, J.L. Multon, CBS Publishers and Distributors,
New Delhi, 1989.
AE6001 Remote Sensing and GIS for Land and Water Management: 4 Credits (3-0-2)
Unit 1 Basics of remote sensing, energy sources and radiation principles, energy interactions with 9 lectures
earth surface features and atmosphere; reflectance curves
Unit 2 Earth resource satellites, sensors, micro-wave remote sensing 7 lectures
Unit 3 Aerial photographs; elements of photogrammetry; interpretation of aerial photographs; 8 lectures
interpretation of satellite images
Unit 4 Digital image processing: image rectification, enhancement, classification and its accuracy 10 lectures
Unit 5 Geographic information system; GIS data models; overview of GIS software; GPS; application 8 lectures
of RS and GIS technologies in land and water resources
Recommended Books:
1 Introduction to Environmental Remote Sensing, E.C. Barret and L.F. Curtis, 3rd Ed., Chapman and Hall, London,
1992.
2 Remote Sensing and Geographical Information System, Mangi Reddy, 2nd Ed., B.S. Publications, 2002.
3 Remote Sensing and Image Interpretation, I.M. Lillesand and R.W. Keifer, John Wiley and Sons Inc., New York,
2000.
4 Fundamentals of Geographic Information System, Michael N. DeMers,2nd Ed., John Wiley & Sons, 1999.
5 Geographic Information Systems in Water Resources Engineering, Lynn E. Johnson, CRC publications, 2009.
6 GIS for Water Resource and Watershed Management, Edited by John G. Lyon, Taylor and Francis, 2003.
34
5 Global Climate Change and Agricultural Production, F. Bazzaz and W. Sombrock, FAO, Daya Publishing House,
Delhi, 2005.
6 Global Warming and Climatology, Chanchal Singh, Akansha Publishing House, New Delhi, 2007.
35
Recommended Books:/Reference materials:
1 BIS Test Codes IS:9253-1979, IS:5994-1979, IS:10743-1986, IS:4468-1986, IS:9545-1986, IS:9934-1986, IS:11442-1985,
IS:4931-1986, IS:12062-1986, IS:10273-1986, IS:9253-1986, IS:5608-1986, IS:6460-1980, IS:6288-1971, IS:6635-1972,
IS:6638-1972, IS:6813-1973, IS:8122-1981, IS:10233-1986, IS:6816-1986, IS:6284-1986.
2 RNAM Test codes and Procedures for Farm Machinery, 2nd Edition, United Nation International Development
Organization, 1995.
36
Recommended Books:
1 Numerical Methods for Engineers and Scientists : An introduction with Applications using MATLAB, by Amos
Gilat and Vish Subramiam. Wiley (ISBN 978-0470565155)
2 Klee, H. and Allen, R. Simulation of Dynamic Systems with MAT LAB and Simulink, 2nd ed, 2011, CRC Press
3 MATLAB/ Simulink User Guides (http://www.mathworks.com/help/techdoc/)
4 University of Michigan. Control Tutorials for MATLAB, http://www.engin.umich.edu/group/ctm
AE6009 Computer Application in Agriculture: 4 Credits (2-0-4)
Unit 1 Introduction of programming and problem solving. Programming basics : loops and 4 lectures
decisions, structures, functions, objects and classes, arrays and strings, pointers.
Unit 2 Introduction C programming: Structure, constants, variables, data types, expressions using 6 lectures
operators, managing input and output operations, decision making. looping, arrays, string
and pointers.
Unit 3 Micro Soft Visual basic, net: GUI design, controls, data handling, input and output operations, 6 lectures
decision making, functions and data base.
Unit 4 Microsoft excel: Data handling, analysis and presentation using graphs and charts. 6 lectures
Unit 5 C and visual basic programmimg and spread sheet for agricultural applications: Soil 6 lectures
conservation, structure design, farm machinery design, and traction analysis.
Recommended Books:
1 Yaswant K, Let Us C, Infinity Scirnce Press, 2008
2 Broson G J Rosenthal D, Introduction to Programming with Visual Basic, NET, Jones &Bartlett, 2005
3 Held B, MicrosoftExcel Functions & Formulas, Wordsware Publishing, INC, 2007
AE6010 Pressurized Irrigation Systems: 4 Credits (3-1-0)
Unit 1 Present status, scope and potential problems; inventory of resources – water source, crop and 8 lectures
8 lectures
soil information, land topography; data requirement; general rules for design .
Unit 2 Pitcher, suction irrigation, bamboo drip irrigation 6 lectures
Indigenous micro irrigation systems: pitcher, 6 lectures
system, low cost drip irrigation systems
Unit 3 Sprinkler irrigation: Adaptibility,
adaptability, problems and prospects, types of sprinkler irrigation 12 12 lectures
lectures
systems; design of sprinkler irrigation system: layout selection, hydraulic design of lateral,
sub-main and main pipe line, design steps; selection of pump and power unit for sprinkler
irrigation system; performance evaluation of sprinkler irrigation system; economics .
Unit 4 Design of drip irrigation system: General
general considerations, wetting patterns, irrigation 12 12lectures
lectures
requirement, emitter selection, hydraulics of drip irrigation system, design steps; necessary
steps for proper operation of a drip irrigation system; performance evaluation of drip
irrigation system; economics; fertigation: uses, advantages and limitations .
Unit 5 Problems and maintenance of pressurized irrigation systems . 4 lectures
4 lectures
Recommended Books:
1.
1 Irrigation: Theory
Irrigation: andand
Theory Practice, A.M.
Practice, Michael,
A.M. Vikas
Michael, Publishing
Vikas House,
Publishing NewNew
House, Delhi, 2012.2012.
Delhi,
2. Principles of Sprinkler Irrigation systems, M.S. Mane and B.L. Ayare, Jain Brothers, New Delhi, 2007.
3. Principles of Drip Irrigation systems, M.S. Mane, B.L. Ayare and S.S. Magar, Jain Brothers, New Delhi, 2006.
4. Micro Irrigation – Theory and Practices, R. Suresh, Standard Publishers Distributors.
5. Micro irrigation for Crop Production, Developments in Agricultural Engineering Series, Vol. 13, Freddie R. Lamm, James
6. E. Ayars, Francis S. Nakayama, Elsevier, 2006.
AE6011 Watershed Management: 4 Credits (3-1-0)
Unit 1 Watershed - introduction and characteristics. Watershed development - problems and 6 lectures 6 lectures
prospects, investigation, topographical survey, soil characteristics, vegetative cover, present
land use practices and socio-economic factors.
Unit 2 Watershed management - concept, objectives, factors affecting, watershed planning based 1010lectures
lectures
on land capability classes, hydrologic data for watershed planning, watershed codification,
delineation, geomorphologic analysis and prioritization of watersheds – sediment yield
index.
Unit 3 Management measures - rainwater conservation technologies - in-situ and ex-situ storage, 12 12lectures
lectures
water harvesting and recycling. Dry farming techniques - inter-terrace and inter-bund land
management. Integrated watershed management - concept, components, arable lands -
agriculture and horticulture, non-arable lands - forestry, fishery and animal husbandry. Effect
of cropping systems, land management and cultural practices on watershed hydrology.
Unit 4 Watershed programme - execution, follow-up practices, maintenance, monitoring and 8 lectures 8 lectures
evaluation. Participatory watershed management - role of watershed associations, user
groups and self-help groups. Planning and formulation of project proposal for watershed
management programme including cost-benefit analysis.
Unit 5 Watershed models and its application; remote sensing and GIS applications in watershed 6 lectures
37
Unit 5 Watershed models and its application; remote sensing and GIS applications in watershed 6 lectures
6 lectures
management
Recommended Books:
1 Watershed Planning and Management, R.V. Singh, Yash Publishing House, Bikaner, 2000.
2 Hydrology and Soil Conservation Engineering: Including Watershed Management. 2nd Ed., Prentice-Hall of
India Learning Pvt. Ltd., New Delhi, 2008.
3 Watershed Management, V.V. Dhruva Narayana, G. Sastr and U.S. Patnaik, ICAR Publication, New Delhi,
1997.
4 Integrated Watershed Management: Principles and Practice, I.W. Heathcote, John Wiley & Sons Inc., New york
York,
1998.
AE6012 Food Processing Equipment Design: 4 Credits (3-1-0)
Unit 1 Engineering properties of food materials and energy balance calculations for preliminary 10 10lectures
lectures
estimations of plant capacity and equipment sizes. Preparations of flow sheets for material
movement and utility consumption in food plant.
Unit 2 Materials of construction: Welding
welding and machining of stainless steel. Design of storage vessels 10
10lectures
lectu
for liquid foods and grains. Pressure vessels design and design of vessel for drum drying.
Unit 3 Design of fluid conveyance system: Pipe,
pipe, sanitary pipe fittings and valves. Design of CIP 6 lectures
6 lectures
systems.
Unit 4 Design of evaporator calandria, vapour separator and condensor. Design of grain processing 10 10lectures
lectures
machines. Design of conveying equipment: belt, screw and bucket.
Unit 5 Design of heat exchange equipment: plate, scraped surface and extended surface heat 6 lectures 6 lectures
exchangers for heating and cooling of gas and liquid.
Books:
Recommended Books
1. Process Heat Transfer, D.Q. Kern, McGraw Hill Book Co., New York, 1988.
2. Fundamental of Food Process Engineering, Romeo T. Toledo, CBS Publishers & Distributors, New Delhi, 1997.
3. Fundamentals of Food Engineering, S.C. Charm, 3rd Ed., AVI Publication Co., Connecticut, 1978.
4. Food Engineering and Dairy Technology, H.G. Kessler, V.A. Kessler, Freising, Germany, 1981.
AE6013 Dynamics of Tillage and Traction: 4 Credits (3-1-0)
Unit 1 Mechanical properties of soil: Shear strength, adhesion, cohesion, and Mohr-Coulomb 10 10lectures
lectures
theory of soil failure. Measurement techniques for stress strain parameters and cone index of
soil.
Unit 2 Mechanics of simple tillage tools. Design consideration and performance evaluation of 8 lectures 8 lectures
different tillage tools.
Unit 3 Traction elements. Theories for predicting thrust and rolling resistance. Methods of 8 lectures 8 lectures
improving traction, evaluation of performance of traction devices. Tyre size, load and
pressure relationship.
Unit 4 Tractor stability: Centrifugal force, rear axle torque and drawbar leverage, new methods in 8 lectures
8 lectures
tractor control to enhance the performance. Ballasting and its effects.
Unit 5 Handling characteristics of vehicles: Steering geometry, steady-state handling characteristics 8 lectures
8 lectures
of a two-axle vehicle, neutral steer, under steer and over steer.
Books:
Recommended Books:
1. Soil Dynamics in Tillage and Traction, W.R. Gill and G.E. Vandenberg, ARS, USDA, 1968.
2. Theory of Land Locomotion, M.G. Bekker and Ann Arbor, The University of Michigan Press, USA, 1956.
3. Soil Cutting and Tillage, E. McKeyes, Elsevier, Tokyo, 1985.
Theory of Ground Vehicles, J.Y. Wong, John Wiley and Sons Inc., New York, 1993.
38
AE6014 Principles of Ergonomics: 4 Credits (3-0-2)
Unit 1 Definitions and development of ergonomics. Human-machine system. Anthropometry: 6 lectures 6 lectures
Workspace design principles, seat design and tractor operator workplace layout.
Unit 2 Physical work: Work physiology, physiological strain, physical workload, muscle 1010lectures lectures
physiology, physical and muscular fatigue in agricultural operation. Working posture, work-
rest schedule.
Unit 3 Occupational exposure to environmental factors such as thermal, dust, chemical, noise and 1010 lectures
lectures
vibration. Health effects of environmental factors and reduction of exposure to agricultural
workers.
Unit 4 Biomechanics and human motion, manual material handling, manual material handling 8 lectures 8 lectures
hazards, musculoskeletal injuries and disorders.
Unit 5 Quantitative and qualitative visual displays, signals and warning lights, warning signs and 8 lectures
8 lectures
warning labels, vision at the workplace.
Books:
Recommended Books :
1. Fitting the Task to the Man, E. Grandjean, Taylor and Francis, London, 1988.
2. Human Factors in Engineering and Design, M.S. Sanders, and E.J. McCormick, McGraw Hill Inc., Singapore, 1978.
39
Department of Civil Engineering
Programme: B.Tech. in Civil Engineering
Year I
Semester I
S.N. Course Code Course Title L T P Credit
1 CY 5102 Applied Chemistry I-B 3 0 0 3
2 MA 5101 Engineering Mathematics III-A 3 1 0 4
3 CE 5101 Structural Analysis - II 3 1 0 4
4 CE 5102 Design of RC Structures - II 3 1 0 4
5 CE 5103 Fluid Mechanics - II 3 0 2 4
6 CE 5104 Transportation Engineering – II 3 0 2 4
23
Semester II
S.N. Course Code Course Title L T P Credit
1 CE 5201 Water Resources Engineering - II 3 1 0 4
2 CE 5202 Geotechnical Engineering - II 3 0 2 4
3 CE 5203 Introduction to Finite Element Method 2 1 0 3
4 CE 5204 Design of Steel Structures - II 3 1 0 4
5 CE 5205 Environmental Engineering - II 3 1 2 5
6 MA 5201 Numerical Methods 3 1 0 4
24
Year II
Semester I
S.N. Course Code Course Title L T P Credit
1 HS 60** Open Elective 3 0 0 3
2 CE 6101 Engineering Geology 3 0 2 4
3 CE 6102 Structural Dynamics 3 1 0 4
4 CE 6151 Computational Methods in Civil Engineering 1 0 6 4
5 CE 60** Elective - I 3 1 0 4
6 CE 60** Elective - II 3 1 0 4
7 CE 6179 Industrial Training (AUDIT) — — — 2
8 CE 6199 Project Part – I (AUDIT) 0 0 4 2
23+4
Semester II
S.N. Course Code Course Title L T P Credit
1 HS 6201 Human Resource Management 3 0 2 4
2 CE 6201 Planning, Estimation and Valuation 3 0 0 3
3 CE 6202 Advanced Mechanics of Solids 3 1 0 4
4 CE 60** Elective - III 3 1 0 4
5 CE 60** Elective – IV 3 1 0 4
6 CE 6299 Project 0 0 8 4
7 ED 6200 Extra Curricular Activities and Discipline 0 0 0 2
23+2
Bridge Courses for lateral Entrants (10+3 Diploma) to Degree Module
Semester I
S.N. Course Code Course Title L T P Credit
1 HS 4301 Elements of Economics 3 0 0 3
2 CY 4301 Comprehensive Chemistry 4 0 2 5
3 MA 4301 Comprehensive Mathematics-I 3 1 0 4
4 PH 4301 Comprehensive Physics 4 0 2 5
5 ES 4377 Programming in C/C++ (Audit) 2 0 4 4
6 CE 4301 Geotechnical & Transportation Engineering 4 0 2 5
22+4
40
Semester II
S.N. Course Code Course Title L T P Credit
1 HS 4401 Comprehensive Communication Skill 2 0 2 3
2 MA 4401 Comprehensive Mathematics-II 3 1 0 4
3 CE 4401 Hydraulics & Water Resources Engineering 3 1 2 5
4 CE 4402 Concrete Technology & RCC Structures 3 1 2 5
5 CE 4403 Structural Analysis & Steel Structures 4 0 2 5
6 CE 4404 Building Planning & Environmental Engg. 4 0 2 5
27
41
COURSE CONTENTS
CE 4301 Geotechnical and Transportation Engineering : 5 Credits (4-0-2)
Unit I Introduction, definitions and relationships; Index properties of soils; Soil classification; Soil
structure; Soil compaction; Permeability and Seepage. 14 lectures
Unit II Effective stress; Stress distribution in soil mass; One dimensional consolidation; Shear strength
of soils and shear tests. 14 lectures
Unit III Roads; Introduction, Classification of road pattern; Geometric design – factors, considerations;
14 lectures
Traffic control devices.
Unit IV Railways – Rails, sleepers, ballast; Geometrics for broad guage, cart deficiency; points and
crossing, station yard. 14 lectures
Recommended Books:
1. Principles of Soil Mechanics and Foundation Engineering, V.N.S. Murthy, UBSPD, New Delhi, 2001
2. Soil Engineering, Part I: Fundamentals & General Principles, Allam Singh & G.R. Chowdhary, C.B.S, New Delhi, 1994.
3. Fundamentals of Geotechnical Engineering, B.M. Das, Brookes & Cole Publications, London, 1998.
4. Highway Engineering, S K Khanna and C E G Justo, Nem Chand & Brothers, Roorkee, India, 1990.
5. A Text Book of Railway Engineering, Arora & Saxena, Dhanpat Rai & Sons, Delhi, 1981.
Unit I Properties of liquid; Hydraulic pressure and its measurement; Flow of liquids. 6 lectures
Unit II Steady, unsteady, laminar and turbulent flows; Continuity equation, momentum equation, and
6 lectures
energy equation.
Unit III Orifices, mouthpieces, nozzles, and venturi meters; Flow through pipes. 6 lectures
Unit IV Hydrological cycle- precipitation, mass curve, point rainfall, depth area relatationship;
6 lectures
Evapotransporation and infiltration.
Unit V Stream Flow measurements, rainfall-run off characteristics, flow duration and flow mass
curve; Hydrographs; influencing factors, base flow separation, effective rainfall, unit hydrograph, 8 lectures
use and limitations.
Unit VI Ground water; aquifers and their properties, specific yield and specific retention, Darcy’s law,
hydraulic conductivity; Soil-water relationship, field capacity consumptive use, requirement 10 lectures
and frequency of irrigation; Water logging and canal lining; River training works.
Recommended Books:
1. Hydraulics and Fluid Mechanics including Hydraulic Machines, Modi and Seth, Standard Book House, Del hi,
1998.
2. Fluid Mechanics, Hydraulics and Hydraulic Machines, Arora, K.R., Standard Book House, New Delhi, 199 9.
3. Engineering Hydrology, Subramanya, K., Tata McGraw Hill, New Delhi, 2006.
4. Hydrology, Principles, Analysis and Design by Raghunath, H.M. New Age International, New Delhi, 1985 .
5. Irrigation Engineering & Hydraulic Structures., Garg, S.K., Khanna Publishers, Delhi., 1993.
42
CE 4402 Concrete Technology and RCC Structures: 5 Credits (3-1-2)
Unit I Concrete: Importance, grades, Ingredients; Cement: Objective, Composition, Varieties and
respective advantages; Aggregates: Objectives, Classification, Characteristics and properties
8 lectures
of aggregates; Water: Quality, Mixing and Curing; Admixtures: Objective, Types of admixture,
compounds and functioning.
Unit II Quality Control - Influencing Parameters, advantages, measure of variability and Statistical
Quality Control, Yield of concrete, Concrete mix proportioning using BIS and IRC methods;
Production of concrete: Batching, mixing, transporting, placing, compacting, finishing, curing; 6 lectures
operations involved in pavement concreting.
Unit III Rheology of fresh concrete, Properties of fresh and hardened concrete; Special Concrete -
Ferro-Cement, Polymer Concrete Composites, Lightweight, Heavy weight concrete, Fibre reinforced
concrete, Dry lean concrete, Pavement quality concrete, Roller compacted concrete, Mass 6 lectures
concrete, Gunniting.
Unit IV Working stress method of RC design; Design of rectangular and flanged beam for flexure, bond,
10 lectures
shear and torsion; One way, two way and continuous slabs.
Unit V Introduction to limit state method of design; Design for flexure, shear, torsion, and compression;
beams; one way, two way, and continuous slabs; Axially and eccentrically loaded columns. 12 lectures
Recommended Books:
1. Concrete Technology, A. M. Neville and J. J. Brooks, Pearson Education Asia, 1999.
2. Concrete Technology, M L Gambhir, Tata McGraw Hill, New Delhi, 1995.
3. Concrete Technology, P. D. Kulkarni, R. K. Ghosh and Y. R.Phull, New Age International, New Delhi, 1998.
4. Concrete Technology, M S Shetty, S. Chand & Company, New Delhi, 2005(e).
5. Concrete for Construction, V K Raina, Tata McGraw Hill, New Delhi, 1988.
6. Concrete Technology, A. R. Santhakumar, Oxford University Press, New Delhi, 2007.
7. IS 16415: 2015, Composite Cement – Specification, BIS.
8. IS 456 : 2000, Plain and Reinforced Concrete - Code of Practice, (4th Revision), BIS.
9. IS 10262 : 2009, Concrete Mix Proportioning – Guidelines BIS.
10. IS 383, 1970, Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, BIS.
11. Concrete Manual: Laboratory Testing for Quality Control of Concrete, M L Gambhir, Dhanpat Rai & Sons, New
Delhi, 1987.
12. Concrete Structure, Mallick & Gupta, Oxford & IBH, New Delhi, 1993.
13. Design of RCC Structure, M.L. Gambhir, Macmillan India Ltd., Delhi, 1993.
14. Reinforced Concrete Structural Elements: Behaviour, Analysis and Design, P. Purushothaman, Tata McGr aw
Hill, New Delhi,1984.
15. IS 456:2000, BIS
CE 4403 Structural Analysis and Steel Structure: 5 Credits (4-0-2)
Unit I Three hinged arches, cables and suspension bridges; Influence line diagram for reaction,
shear and bending moment for determinate beams, arches and trusses. 9 lectures
43
CE 4404 Building Planning and Environmental Engineering: 5 Credits (4-0-2)
Unit I Model Building Byelaws for urban centres in plain and hilly region, Growing Environmental
concerns, Increased Safety and Security measures, Technological Developments, Swachh Bharat 10 lectures
Mission, Development permission; site planning.
Unit II Planning for utility - Principles of building planning for utility, aspects, prospect, grouping,
circulation, privacy, furniture layout, sanitation, elegance, economy flexibility. Planning for 10 lectures
Aesthetic - Principles of architecture, Quality of architecture, factors in architecture, etc.
Unit III Introduction to water and wastewater engineering; Water demand, quality characteristics of 12 lectures
water and wastewaters.
Unit IV Treatment of water:- intake, screening, plain sedimentation, aeration, coagulation cum
12 lectures
flocculation, filtration, disinfection, distribution system.
Unit V Estimation of dry weather and wet weather flows; Treatment of wastewater: a brief introduction
of aerobic and anaerobic treatments, sludge digestion and its disposal; Self-purification of 12 lectures
streams.
Recommended Books:
1. Planning & Designing Buildings, Y.S. Sane, Engineering Book Publishing Co., Pune, 1959.
2. Building Byelaws of Class-A Town, Respective Municipal Corporations, NBC, Latest Publication.
3. National Building Code, BIS
4. Time Saver Standards– Building and Site Planning, De Chiera, McGraw Hill International, Singapore, 1 984.
5. Environmental Engineering Vol. I, Water Supply Engineering, S.K. Garg, Khanna Publishers, Delhi, 200 5.
6. Environmental Engineering Vol. II, Sewage Disposal & Air Pollution Engineering, S.K. Garg, Khanna Publishers,
Delhi, 2006.
7. Wastewater Engineering: Treatment, Disposal & Reuse, MetCalf & Eddy, Tata McGraw Hill , New Delhi, 2 003.
8. Environmental Engineering, Peavy, Rowe and Tachobanglous, McGraw Hill, International, Singapore, 198 5.
Unit I Method of Consistent Deformations, Least Work and Three Moment Equations:-
Static and Kinematic indeterminacies, Stiffness and Flexibility Methods, Analysis of single-
degree and multi-degree indeterminate beams by Method of Consistent Deformations, Least 12 lectures
Work and Three Moment Equations, Settlement of supports.
Unit II Slope Deflection Method:- Slope deflection equations, Fixed end moments, Equations of
equilibrium, Member end moments and shears, Analysis of continuous beams with or without 8 lectures
settlement of supports, Frames without and with side-sways, Frames with inclined legs.
Unit III Moment Distribution Method: Member stiffness, Carryover moments, Carryover factor,
Distribution factors, Basic concepts and operations in the Moment Distribution Method,
Analysis of continuous beams, Frames without and with side-sways, Frames with inclined legs. 12 lectures
Kani’s Method:- Rotation factors, Rotation moments, Basic operations in Kani’s Method, Analysis
of continuous beams with varied support conditions, Settlement of supports, Analysis of
symmetric frames with line of symmetry passing through the beam or column.
Unit IV Two Hinged Arches and Indeterminate Trusses:- Two hinged arches, Horizontal thrust, Analysis
of two hinged semi-circular and segmental arches by method of least work, Parabolic arches
with secant variation of Moment of inertia, Shear force, Normal thrust, and Radial shear at any
point in the arch. Indeterminate Trusses: Internal and external indeterminacies, Analysis of 10 lectures
trusses up to total two degrees of indeterminacy by method of least work.Influence Lines for
Statically Indeterminate Structures: Muller Breaslau’s principle and its application in drawing
ILD for indeterminate structures.
Recommended Books:
1. Basic Structural Analysis, C S Reddy, Tata McGraw Hill, New Delhi, 1996.
2. Structural Analysis, Aslam Kassimali, PWS Publications, 1999
3. Elementary Structural Analysis, S Utku, C H Norris and J B Wilbur, McGraw Hill Inc., Singapore, 1991 .
44
4. Intermediate Structural Analysis, C K Wang, McGraw Hill International, Singapore, 1983.
5. Structural Analysis, R C Hibbeler, Pearson Education, New Delhi, 2008.
6. Structural Analysis, A Ghali and A M Neville, Chapman and Hall, London, 1989.
7. Structural Analysis, Coates, Cutie and Kong, ELBS, London, 1987.
8. Theory of Structures, Timoshenko and Young, McGraw Hill NY, 1965.
9. Elementary Theory of Structures, Yuan-Yu Hseieh and S T Mau, Prentice Hall Inc, NJ, 1995.
10. Fundamentals of Structural Analysis, 4 th Edition, Kenneth M Leet, Chia-Ming Uang and Anee M Gulbert, McGraw-
Hill International Edition, New York, 2011.
Recommended Books:
1. Advanced Reinforced Concrete Design, P C Varghese, PHI, New Delhi, 2006
2. Advanced Reinforced Concrete Design, N. Krishna Raju, CBS, New Delhi, 1988.
3. Design of Reinforced Concrete Structures, N Subramanian, Oxford University Press, New Delhi, 2013.
4. Comprehensive RCC Designs, B C Punamia, Ashok K Jain, and Arun K. Jain, Laxmi Publications, New Delhi, 1998.
5. Reinforced Concrete: LimitState Design, A K Jain, Nem Chand & Broders, Roorkee, India, 1997.
6. Plain and Reinforced Concrete, Vol. I & II, Jai Krishna & O P Jain, Nem Chand & Broders, Roorkee, India, 1981.
7. Reinforced Concrete Structural Elements: Behaviour, Analysis & Design, P. Purushothaman, Tata McGraw-Hill,
New Delhi, 1984.
8. Reinforced Concrete Design, S.N. Sinha, , Tata McGraw-Hill, New Delhi, 1988.
9. LimitState Design of Concrete Structures, Ramachandra, Standard Book House, Delhi, 1990.
10. IS: 456-2000, BIS Publication
11. IRC: 112-2011, Code of Practice for Concrete Road Bridges, IRC, New Delhi
Unit I Dimensional analysis and Similitude: Nature of dimensional analysis, Rayleigh method,
Buckingham’s p- theorem, determination of p-groups, dimensionless groupsof significance, 8 lectures
flow similarity and model studies.
Unit II Basic control volume: approach, control volume equation, continuity equation, momentum
equation, Application of all basic equations: forces on bends, flow through nozzles, moment of 8 lectures
momentum equation.
Unit III Drag and lifts: flow around submerged objects, effect of viscosity on development of drag,
effect of streamlining, drag for two dimensional body, terminal velocity, lift on circular cylinder,
concept of boundary layer, thickness of boundary layer along a thin plate, laminar boundary 9 lectures
layer
Unit IV Open channel hydraulics: one dimensional method of flow analysis, velocity distribution,
kinetic energy, specific energy, critical depth, sub-critical, critical and super-critical flows,
uniform flows, Manning’s formula, normal depth, hydraulically efficient channel section, 9 lectures
hydraulic jump.
Unit V Introduction to Turbomachinery: Types of turbines, impulse and reaction turbines, axial and
radial flow pumps, coefficients of pumps, specific speed of pumps and turbines, similitude of 8 lectures
pumps and turbines.
45
Recommended Books:
1. Engineering Fluid Mechanics, C. T. Crowe, D. F. Elger, J. A. Roberson, John Wiley & Sons, Inc. 2001.
2. Theory and Problems of Fluid Mechanics, Subramanya, K., Tata McGraw Hill, New Delhi, 1993.
3. Fluid Mechanics through Problems, Garde R.J. , New Age International, New Delhi, 1989.
4. Fluid Mechanics Fundamentals and Applications,Cengel, Y. A. and Cimbala, J. M., Tata McGraw Hill Com pany
Limited,New Delhi, 2006..
5. Fluid Mechanics, White, F. M. McGraw.Hill Book Co. International Student Edition, Singapore, 1986.
Unit I Introduction: transportation demand, urban transportation systems & planning, Travel Demands 10 lectures
Forecasting; four-stage sequential modeling approach;
Unit II Highway capacity and Level of Service concepts, characteristics of uninterrupted traffic, capacity
and LOS of Uninterrupted facilities, PCU. 6 lectures
Unit III Characteristics of interrupted traffic, design of signalized intersections- operation, regulation,
conflict area, capacity and LOS of signalized intersections, signal coordination. Traffic
intersection control: Principles of Traffic Control and Traffic Signs, Road Markings and 12 lectures
Channelization, Uncontrolled Intersection: Gap acceptance and capacity concepts, Uncontrolled
Intersection: Capacity and LOS analysis, Traffic Rotaries and Grade Separated Intersection.
Unit IV Airport Engineering: terminal area concept; Runway cross-section details, orientation, length
fixation, practical difficulties and corrections; Runway geometric design, taxiway and apron 8 lectures
arrangement, basic runway patterns and runway numbering.
Unit V Highway Pavements: types, components, structural action, design considerations. 6 lectures
Recommended Books:
1. Transportation Engineering and Planning, C.S. Papacostas, Prentice-Hall India, 2001.
2. Principles of Transportation Engineering, P. Chakroborty and A. Das, Prentice Hall of India Pvt. Ltd., 2003.
3. Traffic Engineering: Transport Planning, L. R. Kadiyali, Khanna Publishers, Delhi 2011.
4. Highway Engineering, S K Khanna , C E G Justo and A.Veeraraghavan, Nem Chand & Brothers, Roorkee, India,
2015.
5. Highway Engineering,: R Srinivasa Kumar, Universities Press, Hyderabad India, 2011.
6. Dock & Harbour Engineering, H P. Oza, Charotar Publishing House, Anand, India, 2016.
7. Airport: Planning & Design, Khanna & Arora, Nem Chand & Brothers, Roorkee, India, 1990.
Unit I Canal headworks: location of headworks on rivers, different units of head works, afflux,
waterway and different levels for weir construction, undersluices, design of weir. 6 lectures
Unit II Sub-Surface flow: seepage forces, theory of seepage, seepage equation, method of determination
of seepage pressure, sheet pile at the upstream end, sheet pile at the downstream end,
8 lectures
intermediate sheet pile, depressed floor, determination of exit gradient, uplift force on the floor
of canal.
Unit III Cross-drainage structure: need of cross-drainage structure, types of cross-drainage structures,
selection of the type of cross-drainage structures, design of cross-drainage structures, waterway
6 lectures
and head way of the stream, head loss through cross-drainage structure, design of transitions
for the canal waterway.
Unit IV Classification of Embankment dams: Gravity Dam, Embankment dam, Butress Dam; Gravity
dams: forces on a gravity dam, causes of failure of a gravity dam, stress analysis in gravity
12 lectures
dams, design of gravity dams. Embankment dams: classification of embankment dams, factors
influencing the design of an embankment dam, general design criteria for embankment dams.
46
Unit V Channel design: Kennedy and Lacey’s regime theory, sediment transport, incipient motion of
sediment transport, critical tractive force approach, bed load, suspended load, bed-material 10 lectures
load, wash load; Design of rigid-boundary channels carrying clear water, design of alluvial
channels.
Recommended Books:
1. Irrigation and Water Power Engineering. Punmia, B.C. and Pandey, B.B. Lal, Laxmi Publication, Delhi, 1986.
2. Irrigation Engineering, Asawa, G.L., New Age International, New Delhi, 1993.
3. Irrigation Water Resources and Water Power Engineering, Modi, P.N., Standard Book House, Delhi, 1995 .
4. Fundamentals of Irrigation Engineering, Singh, Bharat, Nem Chand & Bros, Roorkee, 1997.
5. Hydraulic Structures, 4 th edition, Novak, P. , Moffat, A. I. B., Nalluri, C. and Narayanan, R.Taylo r & Francis
London, UK. (2007)
CE 5202 Geotechnical Engineering II: 4 Credits (3-0-2)
Unit I Soil exploration: purpose and planning, boring methods, soil sampling, observation of ground
water tables, standard penetration tests, cone penetration tests, coring of rocks, geophysical 8 lectures
exploration.
Unit II Slope stability analysis: infinite and finite slopes, earth and rockfill dams, filter criteria. 8 lectures
Unit III Lateral earth pressure: introduction, earth pressure at rest, active and passive earth pressures,
Rankine’s and Coulomb’s theories, graphic solution for Coulomb’s active earth pressure, 8 lectures
cantilever and anchored sheet pile walls, braced cuts.
Unit IV Shallow-foundations: bearing capacity: general concepts, Terzaghi’s theory, effect of groundwater
table, the general bearing capacity equation, eccentrically loaded foundations, plate load 8 lectures
tests, foundation settlements.
Unit V Deep foundations: Piles, types, bearing capacity of single pile and pile groups, pile load tests,
settlement of piles, negative skin friction; Shaft and caisson foundations. Foundations on 10 lectures
expansive soils; Elements of machine foundations; Laterally loaded piles- Cantilever method.
Recommended Books:
1. Geotechnical and Foundation Engineering: Design and Construction, Day, Robert W., McGraw Hill, NY, 1999.
2. Principles of Soil Mechanics and Foundation Engineering, Murthy, V.N.S., UBSPD, New Delhi, 2001.
3. Soil Engineering Part-I: Fundamentals and General Principles, Singh, Alam and Chowdhary, G.R., CBS, New
Delhi, 1994.
4. Geotechnical Engineering: Principles and Practices, Coduto, Donald P., Prentice Hall. Inc., NJ, 1998 .
5. Principles of Foundation Engineering, Das, B. M., PWS & ITP Pub. Company, London, 1999.
6. Geotechnical Engineering: Soil Mechanics and Foundation Design, Cernica, John N., John W iley & Sons, NY,
1996.
7. Solving Problems in Soil Mechanics, Sutton, B. H. C., Addison – Wesley Pub. Co., NY, 1993.
8. Manual of Soil Laboratory Testing, Vol. I, II, & III, Head, K. H., John Wiley & Sons, NY, 1996.
9. Analysis and Design of Sub-Structures: Limit state Method, CRC Press, New Delhi
Unit I Basic concepts of FEM; Direct Stiffness Method (DSM); Concept of an Element and node; Natural
and Essential Boundary Conditions; Steps in FEM; Derivation of element stiffness equations for
8 lectures
1D bar element, truss element and beam element using the concept of mechanics; Treatment of
Nonhomogeneous displacement boundary condition.
Unit II Multi-Freedom Constraints (MFC), Treatment of MFC using Master Slave Elimination Method
and Penalty Factor Augmentation Method. Solving simple problems of bars and truss subjected 4 lectures
to MFCs.
Unit III Concept of vibrational formulation of FEM, Minimization of potential energy, Galerkin and
4 lectures
Rayleigh-Ritz Methods, Analysis of bars and beams using Galerkin’s and Rayleigh-Ritz methods.
47
Unit IV Types of elements, coordinate systems and shape functions, Serendipity and Lagrange Shape
8 lectures
Functions; Strain-displacement matrix; Vibrational approach for assembling stiffness matrix,
Consistent load vectors; Analysis of Beam and Plane Frames.
Unit V Introduction to Two Dimensional Problems, Iso-parametric formulation, CST. 4 lectures
Recommended Books:
1. An Introduction to the Finite Element Method; J. N. Reddy, Tata McGraw Hills, 2009
2. Introduction to Finite Elements in Engineering; T.R. Chandrapatla and Ashok D. Belegundu, Prentice Hall of
India, New Delhi, 2013
3. Finite Element Procedures in Engineering Analysis; Klaus-Jurgen Bathe, Prentice Hall of India, New Delhi,
2002.
4. Finite Element Analysis; S.S. Bhavikati, New Age International Publishers, 2005
5. Introduction to the Finite Element Method, A Numerical Method for Engineering Analysis; Desai and Abel,
CBS Publishers & Distributors Pvt Ltd., 2005
6. Class Notes of Prof. Carlos Felippa, Univ of Boulder, Colorado, (http://www.colorado.edu/engineering /cas/
courses.d/IFEM.d/)
Unit I Plastic Analysis of Steel Structures: plastic bending, plastic modulus, shape factor, moment
curvature relationship, plastic moment capacity, lower and upper bound theorems, analysis of 10 lectures
beams and frames.
Unit II Introduction to Limit State Method of Design and IS-800: 2007: Limit States for Steel design,
Limit States of Strength, Limit States for Serviceability, Actions (Loads), Probabilistic basis of
design, Characteristic loads and strengths, Partial safety factors, Design loads and strengths, 6 lectures
Classification of cross-sections, Types of elements, Combination of loads, Criteria for failure/
Collapse of steel.
Unit III Design of Connections: Bolted and welded connections; Types of bolts and bolted joints, Load
transfer mechanism, Failure of Bolted joints, Strength and Efficiency of bolted joint; Types of 6 lectures
welds, Assumptions in the analysis of welded joints, Design of groove, fillet, intermittent fillet,
butt, and plug and slot welds, Applications.
Unit IV Design of Tension and Compression Members, and Column Bases: Types of tension members,
Net sectional area, Effective net area, Types of failure, Design strength of tension members;
Effective lengths of columns, Slenderness ratio, Types of sections, Types of buckling, 10 lectures
Classification of cross-sections, Design of axially loaded compression members; Types of
column bases, Design of Slab and Gusseted bases.
Unit V Design of Beams, Plate Girders, and Roof Trusses: Behaviour of beams in flexure under
ultimate loads, Classification of Cross-sections, Bending and shear strengths of beams, Design
procedures for Rolled and Built-up sections; Elements of Plate Girders, Proportioning of web 10 lectures
and flanges, Design of vertical, horizontal and load bearing stiffeners, Curtailment of flange
plates; Selection of type of truss, Loads on roof truss, Analysis of roof truss, Selection of
sections for the members, Connections.
Recommended Books:
1. Limit State Design of Steel Structures, S.K Duggal, Tata McGraw Hill Education Pvt Ltd, New Delhi, 2011.
2. Limit State Design of Steel Structures, Rama Chandra and V irendra Gehlot, Scientific Publishers (India),
Jodhpur, 2010.
3. Limit State Design of Steel Structures, I C Syal and Satinder Singh, Standard Publishers Distributor s, New
Delhi, 2015.
4. Design of Steel Structures, N Subramanian, Oxford University Press, New Delhi, 2008
5. Plastic Methods of Structural Analysis, B.G. Neal, Chapman & Hall, London, 1965.
6. Ductile Design of Steel Structures, M. Bruneau, China-Ming Uang, and Andrew Whittaker, Mc Graw Hill, NY,
1998.
7. IS-800: 2007: General Construction in Steel-Code of Practice, BIS, New Delhi, 2007.
48
CE 5205 Environmental Engineering II: 5 Credits (3-1-2)
Recommended Books:
1. Environmental Engineering, H.S. Peavy, D.R. Rowe & G. Tachobanoglous, McGraw Hill International, New York,
1985.
2. Environmental Engineering, G. K iely, Tata McGraw Hill Education Private Limited, New Delhi, 2009.
3. Chemistry for Environmental Engineering, Sawyer, C.N., McCarty, P.L., Parkin, G.F., Tata McGraw-Hill, 2003.
4. Wastewater Treatment Concept and Design Approach: G. L. Karia & R. A. Christian, PHI, N. Delhi.
5. Wastewater Treatment for Pollution Control and Reuse, S. J. Arceivala, Asolekar, Tata McGraw Hill, N ew Delhi.
6. Wastewater Engineering: Treatment, Disposal & Reuse, Metcalf & Eddy, Tata McGraw Hill, New Delhi, 2 003.
7. Wastewater Treatment Plants: Planning, Design & Operation, S.R. Qasim, CRC Press, Book World Enterpr ises,
Mumbai, 2010.
8. Integrated Solid Waste Management, Engineering Principles and Management Issues, George Tchobanoglous,
Hilary Theisen and Samuel V igil. McGraw-Hill Edition (India) Private Limited, New York. 2015.
9. Management of Organic Waste: S. Kumar & A. Bharti, INTECH.
10. Air Pollution & its Control, Perkins, McGraw-Hill, New York, 1986.
11. Methods of Environmental Impact Assessment, Peter Moris and Riki Therivel, UCL Press, London, 1995.
12. Environmental Impact Assessment: Canter, McGraw Hill Education Private Limited, New Delhi, 2014
Unit I Construction materials: stones, bricks, tiles, lime, cement, sand, timber, steel, concrete, paints,
bituminous materials, etc. 12 lectures
Unit II Building construction: foundation, masonry work, DPC, lintels, doors and windows, roofs,
10 lectures
flooring, plastering etc.
Unit III Water supply and sanitary services construction details, septic tank, soak pit. 10 lectures
Unit IV Construction of roads, railways, and bridges. 10 lectures
Recommended Books:
1. Civil Engineering Materials, TTTI, Chandigarh, Tata McGraw Hill, New Delhi, 1992.
2. Engineering Materials, Sushil Kumar, Metropolitan Publishers, New Delhi, 1983.
3. Building Construction, B.C. Punmia, Laxmi Publication, Delhi, 1998.
4. Building Construction Vol. I to IV, W.B. Mackey, Orient Longman, Mumbai, 1993.
5. Highway Engineering, S K Khanna and C E G Justo, Nem Chand and Borthers, Roorkee, India, 1990.
6. A Text Book of Railway Engineering., Arora & Saxena, Dhanpat Rai and Sons, New Delhi, 1981.
49
CE 6101 Engineering Geology: 4 Credits (3-0-2)
Unit I Basic principles of geology, origin of earth – various theories, structure of earth crust, evidences,
age of earth. 7 lectures
Unit II Rocks: Primary classification, texture and structure of igneous, sedimentary and metamorphic
7 lectures
rocks; Rock forming minerals – physical properties, their engineering significance.
Unit III Weathering and erosion, soil formation conservation and erosion control, geological works
7 lectures
by wind, water and glaciers and their resulting features;
Unit IV Structural geology-bed, dip, strike, folds, faults, joints and unconformity; Rocks as a
7 lectures
construction material;
Unit V Geophysical investigations – principles and methods, Earthquakes and landslides. 7 lectures
Unit VI Aquifers and underground water; Selection of site for dams, reservoir, tunnels and highways,
Geological mapping; related practices, Introduction to remote sensing. 7 lectures
Recommended Books:
1. A Geology for Engineers, Blyth, FGH and de Freitas, M.H., ELBS, 8/e
2. Engineering Geology, F. G. Bell, Butterworth-Heinemann (Elsevier) 2/e, 2007
3. A Text Book of Engineering & General Geology, Praveen Singh, S.K. Kataria & Sons, Ludhiana, 1990.
4. A Text Book of Geology, P. K. Mukherjee, The World Press Private Limited, Kolkata, 1990.
5. Engineering Geology for Civil Engineers, D. Venkat Reddy, Oxford & IBH, New Delhi, 1995.
6. Structural Geology, M P Billings, Prentice Hall of India, New Delhi, 1972.
Unit I Single degree of freedom systems - free vibration: introduction to dynamics of structures and
thier modelling, springs in series and parallel; Equation of motion and response, free vibration, 7 lectures
damping, amplitude, natural frequency and logarithmic decrement.
Unit II Single degree of freedom system - forced vibration under harmonic loading; Undamped and
damped harmonic excitation; resonance; Half power method for damping; transmissibility,
vibration isolation, seismic instruments; Intoduction to Duhamel Integral, response to unit 10 lectures
impulse, infinite duration step force, rectangular pulse force, linearly increasing force concept
of response spectrum.
Unit III Multi degree of freedom system: Equation of motion, two degrees of freedom system, natural
7 lectures
vibration, frequency and modes, orthogonality and normalisation of modes.
Unit IV Solution of equation of motion: eigen vlalue problem, estimating fundamental frequency by
6 lectures
Rayleigh’s method; Holzer’s and stodola method and other matrix method.
Unit V Modal analysis: modal equation, modal expansion of displacement, modal displacement super
6 lectures
position, response, element forces.
Unit VI Continuous systems: un-damped equation of motion, natural vibration frequencies and modes
6 lectures
of uniform simply supported and cantilever beams, modal orthogenality.
Recommended Books:
1. Structural Dynamics: Theory & Computations, Mario Paz, CBS, New Delhi, 1985.
2. Dynamics of Structures, Anil K. Chopra, Prentice Hall of India, New Delhi, 2000.
3. Dynamics of Structures, Clough and Penzien, McGraw Hill International, New York, 1993.
4. Structural Dynamics, Craig Jr., John Wiley and Sons, New York, 1981.
5. Theory of V ibrations with Applications, W. T.Thomson, CBS, New Delhi, 1988.
6. V ibrations, Dynamics & Structural Systems, M. Mukhopadhay, Oxford and IBH, New Delhi, 1989.
50
CE 6151 Computational Methods in Civil Engineering: 4 Credits (1-0-6)
Unit I Building bye-laws for high rise building specially for fire & infrastructure, site climate, integrated
7 lectures
approach to building planning, built environment.
Unit II Energy management in buildings, Concept of green buildings, Rating systems of buildings,
7 lectures
Energy audit and life cycle cost of buildings.
Unit III Units of measurements, taking out quantities, abstracts of quantities for mass concrete, RCC,
10 lectures
steel work, deep foundations, dams, irrigation structures, water supply and sanitary services.
Unit IV Preparation of bills – specifications, tendering procedures and contracts. 6 lectures
Unit V Valuation of properties – methods of valuation, income approach, cost approach, related
practice. 12 lectures
Recommended Books:
1. Fire Safety in Buildings(2e), V. K. Jain, New Age Publishers, New Delhi, 2010.
2. Housing, Climate and Comfort, Evans Martin, The Architectural Press - London, 1980.
3. National Building Code of India, Part IV, BIS New Delhi– 2005.
4. Commentary on National Building Code (Part 4) – Fire and Life Safety.
5. Energy Audits: A Workbook for Energy Management in Buildings, Tarik Al-Shemmeri, John Wiley & Sons, 2011.
6. Green Buildings : Project Planning and Cost Estimation, R S Means, John Wiley & Sons, 2011.
7. Time Saver Standard – Site Planning, De Chiara and Koppelman, McGraw Hill International,
8. Singapore, 1984
9. Time Saver Standard- Interior Design & Space Planning, De Chiara, McGraw Hill International, Singapo re,1991.
10. Estimation, Costing and valuation in Civil Engineering, B.N. Dutta, USB Publishers Distributors Limited, New
Delhi, 1998(ed).
11. Estimating Costing Specification and Valuation in Civil Engineering (18e), M. Chakraborty, Published by author,
21B Bhabananda road, Kolkata,2005.
12. Building Technology and Valuation, TTTI, Madras, Tata McGraw Hill, New Delhi, 1989.
13. Valuation of Real Properties, Rangwala S. C., Charotar Publishing House, Anand, India, 2000.
51
CE 6202 Advanced Mechanics of Solids: 4 Credits (3-1-0)
Unit I State of stress in 3D; Equations of equilibrium in Cartesian and polar co-ordinates; Analysis of
strains. 10 lectures
Unit II Theories of failures and their significance, Unsymmetrical bending of beams. 8 lectures
Unit III Curved beams of small and large curvatures, crane hooks, rings and chain links; Shear center. 8 lectures
Unit IV Thin and thick cylinders, Introduction to shells, Membrane analysis of cylindrical shells. 10 lectures
Unit V Stress concentration; Introduction to experimental stress analysis - mechanical and electrical
strain gauges and strain rosettes, analysis. 6 lectures
Recommended Books:
1. Advanced Mechanics of Solids, 3 rd Edition, L.S. Srinath, Tata McGraw Hill, New Delhi, 2009.
2. Advanced Mechanics of Materials, 6 th Edition, Aurther P Boresi and Richard J Schmidt, John Wiley and Sons, Inc,
New York, 2003.
3. Advanced Strength and Applied Stress Analysis, 2 nd Edition, Richard G Budynas, McGraw Hill International,
New York, 1999.
4. Engineering Solid Mechanics Fundamentals and Applications, Abdel-Rahman Ragab and Saleh Eldain Bayoumi,
CRC Press, Boca Raton, Florida, 1999.
5. Strength of Material, G.H. Ryder, MacMillan India ltd, New Delhi,2001 reprint.
6. Engineering Mechanics of Solids, Egor P Popov, Prentice Hall of India, New Delhi, 1990.
7. Introduction to Solid Mechanics, 2 nd Edition, Irving H Shames, Prentice Hall of India, New Delhi, 1990.
8. Fundamentals of Structural Mechanics, 2 nd Edition, Keith D Hjelmstad, Springer (India) Private Ltd, New Delhi,
2005.
9. Mechanics of Materials, Vol I & II, E J Hearn, Butterworth-Hrinemann(Elsevier), Reed Elsevier (India ) Private
Ltd, New Delhi, 2008.
10. Advanced Mechanics of Solids, Otto T Bruhns, Springer-Verlog, Springer (India) Private Ltd, New Delhi, 2008.
11. Design and Construction of Concrete Shell Roofs, G.S. Ramaswamy, Tata McGraw Hill, New Delhi, 1971.
12. Theory of Elasticity, Timoshenko and Goodier, McGraw Hill, New York, 1982.
13. Experimental Stress Analysis, L.S Srinath et. al, Tata McGraw Hill, New Delhi, 1984.
CE 6001 Ground Water Hydrology: 4 Credits (3-1-0)
Unit I Occurance of ground water, ground water movement, saturated and unsaturated flow. ground
water geophysics : electrical resistivity and seismic refraction method. 10 lectures
Unit II Groundwater flow: differential equations governing groundwater flow, radial flow to wells. 8 lectures
Unit III Evaluation of aquifer properties: Theis method, Jacob method, Chow’s method. 8 lectures
Unit IV Groundwater modelling techniques Analog models, Mathematical models. 8 lectures
Unit V Groundwater recharge, discharge and balance; management of groundwater: concept of basin
8 lectures
management, conjunctive use.
Recommended Books:
1. Groundwater Hydrology, Todd, D.K., John Wiley & Sons, Singapore, 1995.
2. Groundwater, Freeze, R.A. and J.A. Cherry, Prentice Hall. Inc., NJ, 1979.
3. Groundwater, Raghunath, H.M, New Age International, New Delhi.,1982.
4. Groundwater Assessment Development & Management, Karanath, Tata McGraw Hill , New Delhi, 1987.
5. Hydraulics of Groundwater, Bear, J., McGraw Hill, New York, 1979.
CE 6002 Flood Control & River Training Works : 4 Credits (3-1-0)
Unit I Concept of probability and probability distribution: basic concepts, properties of random
variables, discrete probability distribution, normal distribution, continuous probability 15 lectures
distributions, confidence intervals.
Unit II Flood frequency analysis: Log normal distribution, Log Pearson type III distribution, Gumbel’s
9 lectures
method.
Unit III Flood control measures: structural & non-structural measures. 9 lectures
Unit IV River training works: rivers, their behavior, control and training. 9 lectures
52
Recommended Books:
1. Irrigation and Water Power Engineering, B.C. Punmia & B.B. Lal, Laxmi Publications, New Delhi, 1986.
2. Flood Control Engineering, S.N. Ghosh, Oxford and IBH, New Delhi, 1986.
3. Statistical Methods in Hydrology, R.T. Clarke, Jonh Wiley & Sons, New York, 1994.
Unit I Site selection; Economic spans, bridge components; Types of bridges and selection of suitable
7 lectures
type, IRC specifications and standard loading.
Unit II Foundations: water way scour depths, types of bridge foundations and considerations in their
design. 7 lectures
Unit III Pier, pier caps, abutments; Approaches and bearings and considerations in their design. 7 lectures
Unit IV Analysis and Behaviour of T-beams with diaphragm, culverts, Box girder bridges, cable stayed
7 lectures
and suspension bridges.
Unit V Courbon’s method for assessment of load distribution, Pigeud’s method of slab design. 7 lectures
Unit VI Design of RC culvert, T-beams and cantilever type bridges; Construction procedures of foundation
and super structures. 7 lectures
Recommended Books:
1. Bridge Engineering, S. Ponnuswami, Tata McGraw Hill, New Delhi, 1986.
2. Essentials of Bridge Engineering, J V ictor, Oxford and IBH, New Delhi, 1991.
3. Comprehensive RCC design, B C Punamia, Ashok K Jain and Arun K Jain, Laxmi Publications, New Delhi, 1999.
4. Design of Concrete Bridges, M G Ashwani, V N Vazrani and MM Ratwani, Khanna Publications, New Delhi, 1981.
5. Design of Bridges, N K Raju, Oxford & IBH, New Delhi, 1998.
6. Principles and Practice of Bridge Engineering, S P Bindra, Dhanpat Rai & Sons, Delhi, 1987.
CE 6004 Matrix Methods of Structural Analysis: 4 Credits (3-1-0)
Unit IV Formulation of member and global stiffness and flexibility matrices for 3D framed structures
equivalent joint loads. 12 lectures
Recommended Books:
1. Introduction to Matrix Analysis of Structures, S K Mallick and K S Rangaswami, Khanna Publishers, Delhi, 1971.
2. Structural Analysis- a Matrix Approach, G. S. Pandit & S P Gupta, Tata McGraw Hill, New Delhi, 1981.
3. Elementary Structural Analysis, S Utku, C H Norris and J B Wilbur, McGraw Hill Inc., Singapore, 1991 .
4. Matrix Method of Analysis of Structures, M B Kanchi, New Age International, New Delhi, 1993.
5. Matrix Analysis of Structures, H I Laursen, McGraw Hill, New York, 1966.
6. Basic Structural Analysis, C S Reddy, Tata McGraw Hill, New Delhi, 1996.
7. Structural Analysis, A. Ghali & A M Neville, Chapman and Hall, London, 1989.
Unit I Philosophy of Earthquake Resistant Design, General effects of Earthquake Loading on Structures,
Architectural Planning for Earthquake Resistance, Strong Column-Weak Beam philosophy, Soft 6 lectures
Storey phenomenon, Short Column problem.
Unit II Response of Structures to Earthquakes: Elastic Response Spectra and Elastic Design Spectra, 5 lectures
Introduction to Performance Based Design.
Unit III Modal Analysis of MDF systems: Modal expansion of displacement and exciting force, Modal
8 lectures
mass, Modal height, Mode participation factor.
Unit IV IS Codal recommendations: Detailed study of IS-1893-2002 (part-I), IS 1893-1984 (Excluding
buildings), IS 13920-1993, Reinforcement detailing for imparting ductility; Salient features of 8 lectures
IS 4326-1993.
53
Unit V Seismic coefficient and Response Spectrum loading of shear buildings, Analysis of Torsional 10 lectures
shear, Example design of Multistoreyed buildings; Ductile detailing of beams and columns.
Unit VI Introduction to non linear analysis of buildings, Introduction to useful/Free codes viz. 5 lectures
OpenSees, Seismostruct etc.
Recommended Books:
1. IS 1893 (Part-I)-2002, IS Criteria for Earthquake Resistant Design, BIS, New Delhi
2. IS 4326-1993, IS COP for Earthquake Resistant Design and Construction of Buildings, BIS, New Delhi
3. IS-13920-1993, IS COP- Ductile Detailing of RC structures Subjected to Seismic Forces, BIS, New Delhi
4. Dynamics of Structures, Chopra, A. K. (2001), PHI, EEE, New Delhi
5. Seismic Analysis of Structures, Dytta , T. K. (2010) John Wiley & Sons (Asia) Pvt Ltd, Singapore
6. Proposed Draft Provisions and Commentary on Indian Seismic Code IS 1893 (Part-I), Jain, S. K. and Murty, C. V. R. (2005), Document
No. IITK-GSDMA-EQ05-V-5.0; and IITK-GSDMA-EQ-15-V-1.0; http://www.nicee.org
7. Design Example of a Six Storey Building, Shah, H. J. and Jain, S. K. (2005), Document No. IITK-GSDM A-EQ26-V-1.0; http://
www.nicee.org
8. Selective resources from http://opensees.berkeley.edu
Unit I 3D Consolidation, Skempton’s pore pressure parameters, stress paths and invariants,
7 lectures
constitutive relations.
Unit II Earth pressures. 7 lectures
Unit III Methods of stability analysis of earth and rock-fill dams. 7 lectures
Unit IV Ultimate bearing capacity of shallow foundation by limit equilibrium method, limit analysis 7 lectures
and method of characteristics.
Unit V Settlement response of pile foundations. 7 lectures
Unit VI Critical state soil mechanics, soil-structure interaction; Reinforced earth. 7 lectures
Recommended Books:
1. Elementary Mechanics of Soil Behavior: Saturated Remolded Soils, Biarez, Jean, and Hicher, Pierre-Yv es,
Balkema Publishers, 1994.
2. Limit Analysis in Soil Mechanics (Developments in Geotechnical Engineering, Vol. 52), Liu, X. L. and Chen, Wal-
Fah, Elsevier Science Ltd, 1991.
3. Limit Equilibrium, Plasticity and Generalized Stress-Strain in Geotechnical Engineering, American So ciety of
Safety Engineers Staff, American Society of Civil Engineers, NY 1981.
4. Soils and Foundations, Evett, Jack, and Liu, Cheng, Prentice Hall Inc, NJ, 1997.
5. Soil Mechanics: Concepts and Applications, Powrie, William, E & F N Spon, London, 1997.
54
CE 6008 Hydropower Development: 4 Credits (3-1-0)
Unit I Hydro vs. thermal power, run-off river plant, storage, pumped storage, tidal and diversion
plant. 10 lectures
Unit II Water power potential, mass curve, load duration curve, peak percentage curve, types of power
10 lectures
supply, reservoir operation.
Unit III Power conduits, unsteady flow in power canal and power tunnel; Penstock-economic diameter,
supports such as anchor blocks and saddles, expansion joints; Surge tank, water hammer in 12 lectures
penstock.
Unit IV Design of intake structures; Type of hydroelectric turbine; Selection of turbines; Power house 10 lectures
details.
Recommended Books:
1. Irrigation, Water Resource and Water Power Engineering, P.N. Modi, Standard Book House, New Delhi, 1 995.
2. Handbook of Hydroelectric Engineering, P.S. Nigam, Nem Chand & Bros, Roorkee, India, 1985.
3. Water Power Engineering, M.M. Dandekar & K.N. Sharma,Vani Educational Book, V ishwa Prakashan, Delhi,
1986.
CE 6009 Design of Pre-Stressed Concrete Structures: 4 Credits (3-1-0)
Unit I Pavement structures, flexible, rigid and semi-rigid pavements, components, evaluation of
properties of pavement and sub-grade materials. 8 lectures
Unit II Stress in flexible pavement, homogenous and layered system, effect of total load and tyre
8 lectures
pressure, equivalent wheel and axle loads.
Unit III Design of flexible pavements, different methods, IRC specifications. 12 lectures
Unit IV Stress in rigid pavement, relative stiffness of slabs, stresses due to bending, warping,
expansion and contraction, combined stresses, IRC recommendation and design method of 8 lectures
reinforced slabs.
55
Unit V Joints, loads transfer at transverse joints by dowel bars, maintenance of joints, pavement 6 lectures
distress, maintenance and strengthening of pavements.
Recommended Books:
1. Principles of Pavement Design, E.T.Yoder and M.W. Hitczak, John Wiley and Sons Inc, NY, 1975.
2. Highway Engineering, S K Khanna , C E G Justo and A.Veeraraghavan, Nem Chand & Brothers, Roorkee, India, 2015.
3. Pavement Analysis and Design (2nd Edition) Edition by Huang, Yang H. Prentice Hall, 2003.
4. Pavement Design: R Srinivasa Kumar, Universities Press, Hyderabad India, 2013.
5. Soil Engineering in Theory and Practice Vol 1: Fundamentals and General Principles, Alam Singh & G R
Chowdhuri, CBS, ND, 1994.
6. IRC: 37-2012, Guidelines for the design of Flexible Pavement (Third revision). Indian Roads Congress.
7. IRC: 58-2015, Guidelines for the design of plain jointed rigid pavements for highways (fourth revision). Indian
Roads Congress.
CE 6011 Earth and Earth Retaining Structures: 4 Credits (3-1-0)
Unit I Lateral earth pressure; Rankine’s and Coulomb’s theories of active and passive earth pressures;
Effect of wall shape, wall friction, backfill and surcharge; Methods of computing active and 12 lectures
passive earth pressure.
Unit II Graphical constructions for computing active and passive earth pressures; Stability of retaining
10 lectures
walls; Anchored bulk heads.
Unit III Arching in soil; Tunnels and shafts; Earth pressure on temporary supports in cuts; Relaxation
8 lectures
and creep effects on earth pressure.
Unit IV Earth and rock fill dams; Selection of sites; Material and dam cross-section; Design of dams;
12 lectures
Stability; Slope stability; Construction and performance.
Recommended Books:
1. Soil Mechanics, Craig, R. F., Routledge, 1997.
2. Engineering Properties of Soil and Rock, Bell, F. G., Blackwell Science Inc., London, 1999.
3. Elements of Soil Mechanics, Smith, G. N., Blackwell Science Inc., London, 1998.
4. Soils in Construction, Schroeder, W. L. and Dickenson, S. E., Prentice Hall Inc, NJ, 1995.
5. Basic Soil Mechanics, Whitlow, R., Addison-Wesley Pub. Co, NY, 1995.
6. Geotechnical Engineering of Embankment Dams, Fell, R., Mac Gregor, P. and Stapledon, D., Balkema Publishers,
1992.
7. Design of Small Dams, United States Department of the Interior, Oxford & IBH, New Delhi, 1974.
CE 6012 Mathematical Modeling in Environmental Engineering: 4 Credits (3-1-0)
Unit I Principles of modelling, continuity equations, mass balance relationships, mathematical models
for ideal and field reactors. 10 lectures
Unit II Water quality modelling, mathematical models for rapid and slow sand filters. 10 lectures
Unit III Biological & biochemical reaction, reaction kinetics of aerobic and anaerobic processes,
10 lectures
process mechanisms for different treatment systems.
Unit IV Development of mathematical models for different biological treatment systems such as
activated sludge process, rotating biological contactor, aerobic & anaerobic filters, UASB 12 lectures
reactors and hybrid reactors, solution techniques for various models.
Recommended Books:
1. Principle of Surface Water Quality Modeling and Control, R.V. Thomann & J.A. Mullor, Harper & Row Publications,
New York, 1984.
2. Physico –Chemical Processes for Water Quality Control, W.J. Webber, Jr., Wiley Intersciences, New Yo rk, 1976.
3. Process Chemistry for Water and Wastewater Treatment, Benefield, Judkins & Weand, Prentice Hall Inc., New
Jercy, 1982.
4. Stream Sanitation Engineering, E.B. Phelps, John Wiley and Sons, New York, 1982
5. Wastewater Engineering: Treatment, Disposal & Reuse, Metcalf & Eddy, Tata McGraw Hill, New Delhi, 19 91.
6. Air Pollution & its Control, Perkins, McGraw Hill International, New York, 1986.
7. Environmental Engineering, H.S. Peaviy, D.R. Rowe & G. Tachobanoglous, McGraw Hill International, New York,
1985.
8. Environmental Engineering, G. K iely, McGraw Hill International, New York, 1997.
56
CE 6013 Advanced Wastewater Treatment Techniques: 4 Credits (3-1-0)
Unit I Introduction, necessity for advanced wastewater treatment, various treatment techniques. 10 lectures
Unit II Removal of residual suspended solids by granular medium filtration and micro-screening,
12 lectures
control of nutrients, biological nitrification and denitrification.
Unit III Removal of nitrogen by physical, chemical & biological process, removal of phosphorous
10 lectures
by biological methods.
Unit IV Removal of toxic compounds and refractory organics, removal of dissolved inorganic
10 lectures
substances.
Recommended Books:
1. Pollution & its Containment, ICE, London, 1984.
2. Physico-Chemical Processes for Water Quality Control, W.J. Webber, Jr., Wiley Interscience, New York, 1976.
3. Hazardous Waste Management, La Grega, Buckingham & Evans, McGraw Hill International, New York, 1994.
4. Wastewater Engineering: Treatment, Disposal & Reuse, Metcalf & Eddy, Tata McGraw Hill, New Delhi, 19 91.
5. Water Technology, Gray, V iva Book Private Limited, New Delhi, 1999.
6. Biological Control of Nitrogen in Wastewater Treatment, D. Barnes and P J Bliss, E & F N Spoon, London, 1983.
CE 6014 Environmental Impact Assessment and Audit: 4 Credits (3-1-0)
Unit I Introduction, definition, principle & methods of environmental impact assessment (EIA), 10 lectures
current status of EIA.
Unit II Socio- economic impact, impacts of noise, traffic, landscape, air and climate, soils and 10 lectures
geology etc., case studies.
Unit III Impact predictions and monitoring, interactions between impacts - predictions and 12 lectures
integrating of interactions.
Unit IV Environmental audit. 10 lectures
Recommended Books:
1. Pollution & its Containment, ICE, London, 1984.
2. Physico-Chemical Processes for Water Quality Control, W.J. Webber, Jr., Wiley Interscience, New York, 1976.
3. Methods of Environmental Impact Assessment, Peter Morris & Riki Therivel, UCL Press, London, 1995.
4. Environmental Risks and Hazards, S.L. Cutter, Prentice Hall of India Pvt. Ltd., New Delhi, 1999.
5. Environmental Impact Assessment: Theory and Practice, P Wathern, Unwin Hyman, London, 1988.
Unit I Introduction, principles of solid waste management, material flow in society, functional elements 6 lectures
of solid waste management.
Unit II Classification and characteristics of solid wastes – physical, chemical and biological
8 lectures
characteristics and its determination.
Unit III Solid waste generation in a society and estimation of generation rate, on-site handling and
8 lectures
storage, equipment used.
Unit IV Collection of solid wastes, transfer and transport, processing of solid wastes, equipment used. 8 lectures
Unit V Ultimate disposal of solid wastes, sanitary landfills, processes occurring in sanitary land-
fills, control of gases and leachate. Energy recovery – methods and means, day-to-day solid 12 lectures
waste management.
Recommended Books:
1. Integrated Solid Waste Management, Engineering Principles and Management Issues, George Tchobanoglous,
Hilary Theisen and Samuel V igil. McGraw-Hill Edition (India) Private Limited, New York. 2015.
2. Hazardous Waste Management, La Grega, McGraw Hill International, New York, 1994.
3. Evironmental Pollution: Solid Waste, S G Misra and D Prasad, Venus Publishing House, New Delhi, 1992 .
4. Wastewater Engineering: Treatment, Disposal & Reuse, Metcalf & Eddy, McGraw Hill, New Delhi, 1991.
5. Environmental Engineering, H.S. Peavy, D.R. Rowe & G. Tachobanoglous, McGraw Hill International, New York,
1985.
6. Environmental Engineering, G. K iely, Tata McGraw Hill Education Private Limited, New Delhi, 2009.
57
CE 6016 Industrial Pollution and Control: 4 Credits (3-1-0)
Unit I Introduction, types of industrial pollution: water, air, land and noise pollution, causes and
effects. 8 lectures
Recommended Books:
1. Wastewater Treatment, M.N. Rao & A.K. Data, Oxford & IBH, New Delhi, 1987.
2. Environmental Engineering, Gerard K iely, McGraw Hill, New York, 1997.
3. Hazardous Waste Management, M D La Grega, P L Buckingham & J.C. Evans., McGraw Hill International, New
York, 1994.
4. Industrial Pollution and Control, S.P. Mahajan, Tata McGraw Hill, New Delhi, 1985.
5. Air Pollution, M.N.Rao & H.V.N. Rao, Tata McGraw Hill, New Delhi, 1989.
6. Industrial Water Pollution Control, W W Eckenfelder Jr, McGraw Hill International, Singapore, 1989.
CE 6017 Principles and Practices in Geotechnical Engineering: 4 Credits (3-1-0)
Unit I Theory of consolidation in three dimensions, Primary and Secondary consolidation; Significance
of effective stress principles; Significance of coefficient of consolidation; Probable causes of 12 lectures
secondary consolidation, Settlement computations.
Unit II Shear strength of soils - concept of octahedral stress and strain, stress path, strength - pore
pressure relationships; Chi factor, mechanisms of strength generation, Hvorslev’s parameters, 10 lectures
Energy correction.
Unit III Slope stability analysis - Alam Singh’s rectangular plot method, Janbu’s stability charts,
10 lectures
Greenwood’s simple solution, slopes in clay of increasing strength, wedge failure theory.
Unit IV Well foundation - analysis and design methods, Terzaghi’s theory of rigid bulk heads, Benerjee
and Gangopadhayay method based on elastic theory, ultimate soil resistance method, IRC 10 lectures
recommendations.
Recommended Books:
1. Geotechnical and Foundation Engineering: Design and Construction, Day, Robert W., McGraw Hill., NY, 1999.
2. Principles of Soil Mechanics and Foundation Engineering, Murthy, V.N.S., UBSPD, New Delhi, 2001.
3. Soil Engineering Part-I: Fundamentals and General Principles, Singh, Alam and Chowdhary, G.R., CBS, New
Delhi, 1994.
4. Geotechnical Engineering: Principles and Practices, Coduto, Donald P., Prentice Hall Inc, NJ, 1998.
5. Principles of Foundation Engineering, Das, B. M., PWS & ITP Publications, London, 1999.
6. Geotechnical Engineering: Soil Mechanics and Foundation Design Set, Cernica, John N., John Wiley & S ons, NY,
1996.
7. Solving Problems in Soil Mechanics, Sutton, B. H. C., Addison – Wesley Pub. Co, NY, 1993.
8. Manual of Soil Laboratory Testing, Vol. I, II, & III, Head, K. H., John Wiley & Sons, NJ, 1996.
Unit I Uniform flow, properties, design of channel for uniform flow. 10 lectures
Unit II Gradually varied flow theory, computation of surface profiles in gradually varied flow, Rapidly
varied flow. 10 lectures
Unit III Flow over spillways; Hydraulic jump: location, control and stabilization; Channel design and
10 lectures
transitions.
Unit IV Unsteady flow: basic equations; Uniformly progressive flow; Velocity of flood wave. 12 lectures
Recommended Books:
1. Open Channel Hydraulics, V.T. Chow, McGraw Hill International. New York, 1959.
58
2. Open Channel Flows, M Hanif Chowdhury, Prentice Hall Inc, NJ, 1993.
3. Flow in Open Channels, Subramanya K, Tata McGraw Hill, New Delhi, 1997.
4. Flow through Open Channels, Ranga Raju K G , Tata McGraw Hill, New Delhi,1994.
Recommended Books:
1. Water Resource Systems Planning & Analysis, Loucks, D.P., J.R. Stedinger & D.A. Haith, Prentice Hall, Inc., N.J.,
1981.
2. Water Resources System, Hall, W.H., and J. Dracup, McGraw Hill International, NY, 1970.
3. System Analysis and Design. R J Augilar, Prentice Hall Inc, NJ, 1973.
4. Operation Research, Taha, H.A., Prentice Hall of India, New Delhi, 1997.
5. Introduction to Optimum Design, J.S. Arora, Mc Graw Hill, NY, 1989.
Unit I Introduction, origin, propagation, intensity, magnitude and measurement of earthquake size,
8 lectures
seismic zoning, risks and consequences.
Unit II Overview of free and forced vibrations of SDOF; Base isolation; Response spectra. 10 lectures
Unit III Multi-degree of Freedom System (MDOF); Vibration absorber, modal analysis for displacement
8 lectures
and element forces.
Unit IV Codal provisions for seismic design of multistory buildings and water towers. 8 lectures
Unit V Codal provisions for seismic design of dams, stack like structures- chimneys, bridges; Ductility,
8 lectures
demand and ductility capacity.
Recommended Books:
1. Elements of Earthquake Engineering, Jai Krishna and A R Chandrasekaran, Nem Chand & Brothers, 1990.
2. Structural Dynamic: Theory and Computations, Mario Paz, CBS, New Delhi, 1985.
3. Dynamics of Structures, Anil K Chopra, Prentice Hall of India, New Delhi, 2000.
4. Dynamics of Structure, Clough and Penzien, McGraw Hill International, New York, 1993.
5. An Introduction to the Theory of Seisomology, K E Bullen and B A Bolt, Cambridge Universitry Press, Cambridge,
1985.
6. Eartquake Resistant Design of Masonry Buildings, M Tomazevic, Imperial College Press, London, 1999.
7. Relevant BIS Codes; IS: 1893, IS: 4326, IS: 13920.
CE 6021 Ground Improvement Techniques: 4 Credits (3-1-0)
59
Recommended Books:
1. Method of Treatment of Unstable Grounds, Bell, Butternorth, London, 1975.
2. Soil Improvement- History, Capabilities and Outlook, ASCE publication , 1978
3. Soil Engineering in Theory and Practice Vol III: Special Topics, Ed: Alam Singh, Asia Publishing H ouse, New
Delhi, 1997.
4. Reinforced Earth, T S Ingold, Thomas Telford Ltd, London, 1982.
Unit I Concept of system design, structure of systems, design process, analysis and design,
conventional Vs. optimum design. 6 lectures
Unit II Economic considerations in design: concept of time value of money and interest, interest
8 lectures
formulae, cash flow diagrams, economic bases for comparing alternate projects.
Unit III Concept of optimization, design variables, objective functions and constraints, formulation of
linear programming problems, slack and surplus variables, solution of LP problem by graphical 8 lectures
methods.
Unit IV Simplex method of solving LP problem artificial variables, two phase simplex, discrete and
integer programming by graphical and simplex method (Branch and Bound Method), Duality of 12 lectures
an LP problem; Statement and formulation of Transportation and Assignment problems.
Unit V Minimum weight design of steel structures, formulation based on plastic analysis and solution
8 lectures
by graphical methods, examples on beams and frames.
Recommended Books:
1. Introduction to Optimum Design, J.S. Arora, Mc Graw Hill, NY, 1989.
2. System Analysis and Design, R.J. Angilar, Prentice Hall Inc. NJ, 1973.
3. Engineering Design, G.Dieter, Mc Graw Hill, NY, 1987.
4. Optimization Methods, K.V. Mittal and C. Mohan, New Age International, New Delhi, 1996.
5. Plastic Methods of Structural Analysis, B.G. Neal, Chapman and Hall, London, 1965.
CE 6023: Water Pollution Engineering: 4 Credits (3-1-0)
Unit I Sources of water pollution, laws and regulations, measures of water quality, water quality
criteria, decay kinetics. 10 lectures
Unit II Pollution in rivers and streams: contaminant transport process, Longitudinal dispersion,
12 lectures
dissolve oxygen models in rivers, introduction to waste load allocation model.
Unit III Groundwater quality modeling: groundwater flow equation, hydrodynamic dispersion,
10 lectures
advection-dispersion equations, point and non-point source problems.
Unit IV Water quality in lakes and reservoirs: Natural processes, Eutropication and nutrient recycling,
water quality model, restoration and management. 10 lectures
Recommended Books:
1. Water supply and pollution control, V iessman, Jr. Warren, Hammer, M. J., Perez, E. M. amd Chadik, P. A. PHI
Learning Private Limited, New Delhi, 2009.
2. Environmental Engineering, G. K iely, McGraw Hill Singapore, 1998.
3. Water Quality Engineering in Natural Systems, D. A. Chin, John Wiley & Sons, 2006.
CE 6024 Advanced Concrete Technology: 4 Credits (3-1-0)
Unit I Cement: Hydration products of cement, Microstructure of hydrated cement paste (hcp), Transition
zone, effects of microstructures of hcp on engineering properties of concrete; Structure of 7 lectures
concrete, Fracture mechanics of concrete, Future trend of development in concrete.
Unit II Mix Proportioning of high strength concrete and special concretes by BIS, IRC, ACI and British
7 lectures
methods.
Unit III Advanced cementitious composites: Fibre reinforced concrete (FRC), specific requirements of
7 lectures
FRC for blast proof structures and airfield; Polymer concrete composites.
Unit IV High workability concrete for multi-storeyed buildings: Pumpable, Self compacting, High
7 lectures
performance and Extra high performance of concrete.
60
Unit V Low workability concrete for highways and dams: Dry lean concrete, Pavement quality concrete, 7 lectures
Roller compacted concrete, Mass concrete.
Unit VI Durability assessment of concrete structures: ND tests of concrete; Permeability of concrete
under different pressure conditions;Degradation of concrete; Health assessment, repair and 7 lectures
rehabilitation of major concrete structures.
Recommended Books:
1. Properties of Concrete, A. M. Neville, Longman, ELBS, London, 1996.
2. Concrete Microstructure, Properties and Materials, P. K. Mehta and Paulo J. M. Monterio, Indian Conc rete
Institute, 1997.
3. Advanced Concrete Technology, Zongjin Li, John Wiley & Sons, 2011.
4. Handbook on Advanced Concrete Technology, N. V. Nayak and A. K. Jain, Narosa Publishing House, New Delhi,
2012
5. Handbook on repair and rehabilitation of RCC building, CPWD, 2002.
6. IRC:44Guidelines For Cement Concrete Mix Design For Pavements (Second Revision), 2008.
7. IRC:SP:62-2014, Guidelines for Design and Construction of Cement Concrete Pavements for Low Volume
Roa ds.
8. IRC:SP:49-2014 Guideline for the Use of Dry Lean Concrete as Sub-Base for rigid Pavement.
9. IS 456 : 2000, Plain and Reinforced Concrete - Code of Practice, (4th Revision), BIS.
10. IS 10262 : 2009, Concrete Mix Proportioning – Guidelines BIS.
11. IS 383, 1970, Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, BIS.
CE 6025 Urban Planning and Design: 4 Credits (3-1-0)
Unit I Theories and concepts of urban planning; garden city, linear city, industrial town, redevelopment. 7 lectures
Unit II Development plan, townplanning schemes, neighborhood. 7 lectures
Unit III Elements of aesthetics in town planning, perspective on spatial planning; Urban-rural nexus. 7 lectures
Unit IV Planning surveys & planning norms. 7 lectures
Unit V Elements of urban settlements, transportations utility services, amenities, housing, informal
7 lectures
sectors.
Unit VI Urban threshold, suburb development; Laws related to planning. 7 lectures
Recommended Books:
1. Urban Pattern, Gallion A.B., CBS Publication, New Delhi, 1986.
2. Human Settlement that We Need, C.A. Doxiadis, Tata McGraw Hill, New Delhi, 1976.
3. Policies in Urban Planning, William Solesbury, Pergamon Press, Oxford, 1974.
4. Urban Design, Feddric Gibberd, Architectural Press, London, 1963.
5. The Architecture and Urban Design, Houghton, Evans, Architectural Press, London, 1983.
6. Urban Landuse Planning, Chapin, University of Illinois Press, Urbana, Illinous, 1965.
7. Models of Cities & Regions, Wilson A.G., Rees P.H., and Leight C.M., John Wiley & Sons, NY, 1977.
CE 6026 Theory of Elasticity: 4 Credits (3-1-0)
Unit I Analysis of stress and strain in 3D, stress-strain relationships; Differential equation of
10 lectures
equilibrium compatibility of strains.
Unit II Plane stress and plane strain problem, two-dimensional problems in rectangular and polar
8 lectures
co-ordinates.
Unit III General theorems in elasticity and their applications, principle of superposition. 8 lectures
Unit IV Strain energy; Energy principles; Virtual work; Castigliano’s theorem, principle of least work. 8 lectures
Unit V Problems of torsion and bending of bars. 8 lectures
Recommended Books:
1. Theory of Elasticity, S. Timoshenko & J. N. Goodier, Mc Graw Hill International, NY, 1982.
2. Applied Elasticity, Zhilun Xu, Wiley Eastern Ltd., New Delhi, 1992.
3. Introduction to Solid Mechanics, Irving H. Shames, Prentice Hall of India, New Delhi, 1989.
4. A Treatise on the Mathematical Theory of Elasticity, A.E.H. Love, Dover, New York, 1927.
61
CE 6027 Finite Element Methods: 4 Credits (3-1-0)
Unit I Basic concepts of FEM, matrix techniques, vibrational methods, concept of an element,
10 lectures
displacement models, iso-parametric elements, formulation of element stiffness based on
direct, vibrational and weighted residual techniques, mixed and hybrid models.
Unit II Discretization of a body or structure, co-ordinates and shape functions, interconnection at
nodes, construction of stiffness matrix and loads for assemblage by different approaches, 8 lectures
Boundary condition, solution to one dimensional problems.
Unit III Beams and frames: truss and beam elements, finite element formulations, load vector, boundary
8 lectures
conditions, shear force and bending moment, beams on elastic support, plane frames.
Unit IV Two dimensional problems: constant strain triangles, triangular, rectangular and iso-parametric
elements, finite element modelling, boundary conditions, numerical integration, axisymmetric 8 lectures
problems.
Unit V Three dimensional problems: tetrahedral and prismatic elements, degenerate forms, finite 8 lectures
element formulation, stress calculations, solution to three dimensional problems.
Recommended Books:
1. Introduction to the Finite Element Method, C.S. Desai and J.F. Abel, Affiliated East-West Press, New Delhi, 1977.
2. The Finite Element Method, O.C. Zienkiewicz Tata Mc Graw Hill, New Delhi, 1979.
3. Introduction to Finite Elements in Engineering, T.R. Chandrapatla and Ashok D. Belegwndn, Prentice Hall of
India, New Delhi, 1991.
4. Finite Element Procedures in Engineering Analysis, Klans-Jiirgen Bathe, Prentice Hall of India, New Delhi,
1990.
5. Energy and Finite Element Methods in Structural Mechanics Irving H. Shames and Clive L. Dym, Wiley Eastern
Ltd, New Delhi, 1995.
Unit IV Travel demand management measures; case studies. Introduction to Urban Freight
8 lectures
Transportation and Urban Mass Transportation Systems.
Recommended Books:
1. Modelling Transport, J. de D. Ortuzar and L.G. Willumsen, John Wiley and Sons, 2001.
2. Transportation Engineering – An Introduction, C.J. Khisty and B.K. Lall, Prentice Hall of India Pvt. Ltd., 2002.
3. Transportation Engineering and Planning, C. S. Papacostas and P. D. Prevedouros, Prentice Hall of India Pvt.
Ltd., 2001.
4. Principles of Transportation Engineering, P. Chakroborty and A. Das, Prentice Hall of India Pvt. Ltd., 2003.
5. Principles of Urban Transport Systems Planning, B.G. Hutchinson, McGraw- Hill Book Co., New York, 1974.
6. Traffic Engineering and Transport Planning, L.R. Kadiyali, Khanna Publishers, New Delhi, 2000.
7. Public Transportation, G. E. Gray and L. A. Hoel, Prentice Hall, New Jersey, 1992.
62
CE 6029 Traffic Engineering: 4 Credits (3-1-0)
Unit I Driver behavior, traffic information and control systems, traffic studies- volume, speed and
10 lectures
delay studies.
Unit II Elements of traffic flow theory, characteristics of uninterrupted traffic, capacity and LOS of
Uninterrupted facilities, characteristics of interrupted traffic, design of signalized intersections, 10 lectures
capacity and LOS of signalized intersections, actuated signal control, signal coordination.
Unit III Traffic Analysis and Management: Capacity and Level of Service concepts, Queuing models and
applications, Basics of traffic management. Traffic intersection control: Principles of Traffic 12 lectures
Control and Traffic Signs, Road Markings and Channelization, Uncontrolled Intersection: Gap
acceptance and capacity concepts, Uncontrolled Intersection: Capacity and LOS analysis, Traffic
Rotaries and Grade Separated Intersection.
Unit IV Design of parking, lighting and terminal facilities, simulation of traffic systems, statistics and
probability in traffic engineering, trends in traffic engineering. 10 lectures
Recommended Books:
1. Traffic Engineering, Roger P. Roess, William R. McShane & Elena S. Prassas, Prentice-Hall, 1990.
2. Traffic Engineering – Theory and Practice, Pignataro L. J.,Prentice Hall, 1973.
3. Principles of Transportation Engineering, P. Chakroborty and A. Das,Prentice Hall of India Pvt. Ltd., 2003.
4. Transportation Engineering: An Introduction, C. J. Khisty and B. K. Lall, Prentice- Hall India, 2003 .
5. Traffic System Analysis, Wohl M. and Martin B. V., McGraw-Hill Book Company, 1967.
6. Traffic Engineering, L. R. Kadiyali, Khanna Publishers, 2000.
7. Traffic Flow Fundamentals, A. D. May, Prentice–Hall, 1990.
8. Transportation Engineering and Planning, C.S. Papacostas, Prentice-Hall India, 2001.
9. Highway Capacity Manual (HCM), Transportation Research Board, USA, 2000
Unit I Triangulation system, strength of figures, selection and inter-visibility of stations, signals &
10 lectures
towers, base line measurement, reduction to mean sea level, satellite stations, reduction to
centre.
Unit II Theory of errors and triangulation adjustments- types of errors, principle of least squares, 12 lectures
laws of weights, normal equations, method of correlates, station and figure adjustments.
Unit III Photogrammetry- definition & scope, branches of photogrammetry, photogrammetric methods,
10 lectures
stereo-pairs, relief displacement and tilt distortion, flight planning, ground control, plotting
instruments.
Unit IV Astronomical survey- terms and definitions, formula of spherical trigonometry, methods used 10 lectures
culmination of stars, circumpolar stars, measurement of times and their conversions,
instruments used; Related practice.
Recommended Books:
1. Surveying Vol. II & III, B.C. Punamia, Laxmi Publication, New Delhi, 1994.
2. Surveying & Levelling Vol. II, T.P. Kanetkar & S.V. Kulkarni, Pune V idyarthi Griha Prakashan, Pune, 1985.
3. Surveying Vol.. II, S.K. Duggal, Tata McGraw Hill, New Delhi, 1996.
4. Plane & Geodetic Surveying for Engineers Vol.. II, David Clark, C.B.S., New Delhi, 1983.
5. A Text Book of Advanced Surveying, R. Agor, Khanna Publishers, Delhi, 1994.
6. Surveying, A. Barmister & S. Raymond, Longman, English Language Book Society, London, 1984.
63
Department of Computer Science & Engineering
Programme: B.Tech. in Computer Science & Engineering
Bridge Courses for Lateral Entrants (10+3 Diploma) to Degree Module
Semester I L T P C
HS 4301 Elements of Economics 3 0 0 3
CY 301 Comprehensive Chemistry 4 0 2 5
MA 4301 Comprehensive Mathematics-I 3 1 0 4
PH 4301 Comprehensive Physics 4 0 2 5
CS 4301 Object Oriented Programming in C++ 3 0 2 4
CS 4302 Computer Organization & Architecture 3 0 2 4
25
Semester II
HS 4401 Comprehensive Communication Skill 2 0 2 3
MA 4401 Comprehensive Mathematics-II 3 1 0 4
CS 4401 Programming in Java 3 0 2 4
CS 4402 Operating Systems 3 0 0 3
CS 4403 Microprocessors 3 0 2 4
CS 4404 Data Structures 3 1 2 5
23
Year I
Semester I
MA 5103 Engineering Mathematics IIIB 3 1 0 4
MA 5107 Discrete Mathematics 3 1 0 4
CS 5100 Design and Analysis of Algorithms 3 1 2 5
CS 5101 Data Communication 3 1 0 4
CS 5102 Software Engineering 3 0 2 4
21
Semester II
MA 5202 Probability & Statistics 3 1 0 4
CS 5200 Database Management Systems 3 1 2 5
CS 50** Elective- I 3 0 2 4
CS 5202 Theory of Computation 3 1 0 4
CS 5203 Computer Networks 3 1 2 5
CS 5204 Computer Architecture 3 1 0 4
26
Year II
Semester I
** 60** Open Elective 3 0 0 3
CS 6101 Compiler Design 3 1 2 5
CS 6102 Computer Network Security 3 1 0 4
CS 60** Elective - II 3/3 0/1 2/0 4
CS 60** Elective - III 3/3 0/1 2/0 4
CS 6179 Industrial Training (Audit) 0 0 2 1
CS 6199 Project-I 0 0 4 2
23
Semester II
CS 6200 Microprocessors and Micro-Controllers 3 0 2 4
CS 6201 Wireless Communication 3 1 0 4
CS 60** Elective -IV 3/3 0/1 2/0 4
CS 6202 Soft Computing 3 0 2 4
CS 6299 Project-II 0 0 8 4
ED 6388 Extra Curricular Activities & Discipline - - - 2
HS 6201 Human Resource Management 3 0 2 4
26
64
List of Electives: A) Degree 1st Year
1. CS 5001 Image Processing: 4 Credits (3-0-2)
2. CS 5002 Graph Theory : 4 Credits (3-1-0)
3. CS 5003 Computer oriented Numerical Techniques : 4 Credits (3-0-2)
B) Degree 2 nd Year (Elective II & III)
1. CS 6001 Artificial Intelligence: 4 Credits (3-1-0)
2. CS 6002 Grid Computing : 4 Credits (3-1-0)
3. CS 6003 VLSI Design: 4 Credits (3-1-0)
4. CS 6004 Distributed Algorithms: 4 Credits ( 3- 1 – 0)
5. CS 6005 Information Theory & Coding : 4 Credits (3-1-0)
6. CS 6009: Combinatorial Design Theory for Computer Science: 4 Credits (3-0-2)
Elective - IV
7. CS 6006 Speech Processing: 4 Credits (3-0-2)
8. CS 6007: Parallel Computing : 4 Credits (3-1-0)
9. CS 6008: Mobile Application Development: 4 Credits (3-0-2)
COURSE CONTENTS
CS 4301 Object Oriented Programming in C++: 4 Credits (3-0-2)
Unit I Overviews of C, Procedural Vs Object Oriented Programming( OOP), characteristics of OOP, 8 lectures
Variables, constants, operators in C++, Functions: Function Prototyping, Call by reference,
Call by Value, Return by Reference, Inline Function, Namespace in C++, Classes and Objects,
Scope resolution operator, public, private access specifier, Object instantiation, array of objects,
passing objects to member functions, this pointer
Unit II Constructors, Default Constructor, Parameterized Constructors, Dynamic memory allocation 10 lectures
using new, delete, Destructors, Friend Functions/Classes, Copy Constructors, Usage of
reference (&) variables, Introduction to overloading, Constructor overloading, Function
overloading, Operator overloading, unary operator overloading, Binary operator overloading,
Use of friend function in operator overloading
Unit III String manipulation using operators. Introduction to Inheritance, Base pointers, virtual base 8 lectures
classes, Abstract classes, Constructors in Derived classes, Types of inheritance, Nesting of
classes, Pointers, Pointer to Object, Pointer to Derived class, Virtual Function, Pure Virtual
Function, Run-time Type Polymorphism, Compile-time type polymorphism
Unit IV Streams classes, Disk File I/O with streams, File pointers, Error handling in File I/O with member 8 lectures
functions, Memory as a stream object, Command Line arguments, Printer output, Introduction
to templates, Function Templates, Class templates Exceptions
Unit V Introduction to STL, Containers, Algoritms, Iterators, Specialised iterators, Associative 8 lectures
Containers, Sequence Containers, Function Objects.
Recommended Books:
1. Stephen Prata, “C++ Primer Plus”, Sixth Edition, Pearson, 2012
2. S. B. Lippman & J. Lajoie, “C++ Primer”, 5th Edition, Addison Wesley, 2012.
3. Bjarne Stroustrup, “The C++ Programming Language”, 4th Edition, Pearson, 2013.
65
transfer, data transfer over synchronous and asynchronous buses, priority interrupt, direct
memory access, I/O channel.
Unit IV CPU structure and function: Introduction, general registers organization, stack organization,
Memory Organization: Random and serial access memories, Static & dynamic RAMs, ROM, 9 lectures
Memory Hierarchies: Cache memories; Mapping function, Replacement Algorithms;
Performance consideration; Virtual memory, Memory Management.
Unit V Introduction to microprogramming level microarchitecture: Conventional machine level
instruction format and addressing modes. Basic concepts of pipelining: Instruction Queue, 8 lectures
branching, data dependency. Computer Peripherals; Examples of Intel 80X86 processors, Power
PC Family, Motorola 680X0 family. Introduction to file system FAT 16, FAT32, NTFS. Disk
formatting and partitioning.
Recommended Books:
1. Mano, M “Computer System and Architecture”, (3rd edition) Prentice Hall of India,
2. Stallings,W “Computer Organization & Architecture”, fifth edition, 2000 PHI.
3. V.Carl Hamacher, Z.G. Vranesic and Zaky “Computer Organization”, International Edition McGraw Hill.
4. S. Bigelow , Troubleshooting, Maintaining and Repairing PCs, Melleneum Ed., Tata McGraw Hill
CS 4401 Programming in Java: 4 Credits (3-0- 2)
Unit I OOP Principles, Overview of Java, data types, variables, dynamic initialization, arrays, operators, 4 lectures
control statements, type conversion and casting.
Unit II Concepts of classes and objects, Methods, constructors, this key word, garbage collection, 10 lectures
overloading methods and constructors, parameter passing techniques, recursion, nested classes
and inner classes, exploring the String class; Inheritance: member access rules, forms of
inheritance, method overriding, abstract classes, dynamic method dispatch, using final with
inheritance, the Object class; Packages and Interfaces: Defining, Creating and Accessing a
Package, importing packages, differences between classes and interfaces, defining an interface,
implementing interface, variables in interface and extending interfaces
Unit III Exception handling: types of exceptions, Built-in exceptions, creating own exception sub 10 lectures
classes; Multithreading: differences between process and thread, thread life cycle, creating
multiple threads using Thread class, Runnable interface, Synchronization, thread priorities,
inter thread communication, daemon threads, deadlocks, thread groups. Java Library: String
handling, java.util, java.io and java.net packages.
UnitIV Applet: class, Architecture; a simple banner Applet, HTML Applet tag, passing parameter to 10 lectures
Applets etc; Events handling: Event sources, Event classes, Event Listeners, Delegation
event model, handling mouse and keyboard events, Adapter classes.
Unit V Introduction AWT: AWT classes, window fundamentals, working with frame windows, working 8 lectures
with graphics, colors, fonts; AWT control fundamentals, Networking programming TCP/IP
sockets, Datagram, URL connection,
Recommended Books:
1. Java How to Program, Sixth Edition, H.M.Dietel and P.J.Dietel, Pearson Education/PHI
2. Core Java 2, Vol 1, Cay.S.Horstmann and Gary Cornell, Seventh Edition, Pearson Education.
3. Core Java 2, Vol 2, Cay.S.Horstmann and Gary Cornell, Seventh Edition, Pearson Education.
Recommended Books:
1. Introduction to algorithms: T.H. Cormen, C.E. Leiserson, R.L. Rivest, C.Stein 3rd edition, PHI, 2009.
2. Fundamentals of Algorithm-by Horowitz & Sahani, 2nd Edition, Universities Press.
3. Algorithms – Berman, Cengage Learning
4. Algorithms By Sanjay Dasgupta, Umesh Vazirani – McGraw-Hill Education
5. Algorithm Design – Goodrich, Tamassia, Wiley India.
6. Algorithm Design Manual, S.Skiena, 2nd Edition, Springer.
Unit I Analog and Digital data and signals, periodic and non-periodic signals; periodic analog 7 lectures
signal: sin wave, phase, wave length , time and frequency domain , composite signal,
bandwidth, Digital signal: bit rate and bit length, signal representation and systems
Unit II Transmission of digital signal, transmission impairment, attenuation, distortion, noise; data 7 lectures
rate limit; Nyquist bit rate, Shannon capacity; performance: bandwidth, throughput, latency,
Digital to analog communication, analog to digital communication, PCM DM; transmission
mode: serial parallel, synchronous, asynchronous, simplex, duplex, half duplex, full duplex.
Unit III Digital to analog conversion: ASK, FSK, PSK, QAM, analog to analog conversion, AM, 10 lectures
FM, PM
Unit IV Multiplexing: FDM, WDM, synchronous DDM, statistical TDM: Spread spectrum: FHSS, 10 lectures
DSSS
Unit V Circuit switching network, circuit switching technology in telephone networks, data gram 8 lectures
networks in the internet; virtual circuit network: Structure of circuit switch and packet
switch
Recommended Books:
1. Data Communication and Networking- Behrouz A. Forouzan, Tata McGraw-Hill
2. Computer Networking – Tanenbaum
3. Data and computer communications, W.Stallings,PHI, New Delhi
68
Unit V Coding and Testing: Coding standards and Code Review; Software Testing: Verification and
Validation, Testing strategies for Conventional software: Unit testing, Integration testing,
Validation testing, System testing; Testing Strategies for Object Oriented software; Basic Path 10 lectures
testing : Flow graph notation, Independent program path, Deriving test cases, Graph matrices;
Conditional Structure testing: Condition testing, Data flow testing, loop testing; Black box
testing : Graph based testing, Equivalence partitioning, Boundary value analysis, Orthogonal
array testing; White box testing : Statement Coverage, Branch Coverage, Condition Coverage,
Path Coverage, McCabe’s Cyclomatic Complexity Metric, Data flow testing , Mutation testing.
Software Maintenance.
Recommended Books:
1. Fundamental of Software Engineering, 3rd Ed., Rajib Mall, PHI, August ,2011
2. Software Engineering: A Practitioner’s Approach, 5th Ed., Roger S. Pressman, Tata McGraw Hill
3. Software Engineering Concepts, Richard Fairley, Tata McGraw Hill, New Delhi, 2002.
4. Classical and Object Oriented Software Engineering with C++/Java , 3rd Ed., S.R. Schach, McGraw Hill International,
New York, 1998..
69
CS 5203 Computer Networks: 5 Credits (3-1-2)
Unit I Computer networks and the Internet: Internet and protocol, the network edge, network core, 10 lectures
access networks and physical media, ISPs and Internet backbones, delay and loss in packet
switched networks, protocol layers and their service models, history of computer networking
and the internet. OSI Model, layers in the OSI Model, TCP/IP protocol suites, Addressing.
Application Layer: principles of network applications, the web and the HTTP, FTP, electronic
mail in the internet, SMTP,MIME, DNS,P2P file sharing, socket programming with TCP, socket
programming with UDP, web server and its functions.
Unit II Transport Layer: transport layer services, multiplexing and demultiplexing, connectionless 10 lectures
transport (UDP), principles of reliable data transfer, connection-oriented transport (TCP),
principles of congestion control, TCP congestion control.
Unit III Network Layer: forwarding and routing, network service models, virtual circuit and datagram 8 lectures
networks, the inside of a router, forwarding and addressing in the internet, Routers; Introduction
to IP addressing, Introduction to subnetting, VLSM, CIDR, Supernetting, IPv6; Introduction
to routing algorithms: Distance-Vector routing algorithm, Link state routing algorithm, BGP,
RIP, broadcast and multicast routing.
Unit IV The link layer and local area networks: link layer services, error detection and correction 8 lectures
techniques, multiple access protocols, link layer addressing, the Ethernet, interconnections
(hubs and switches), point-to-point protocol, link virtualization, ATM networks, MPLS, Wireless
and Mobile networks: wireless links and network characteristics, CDMA, Wi-Fi: 802.11 wireless
LANs, cellular internet access, mobility management principles, mobile IP, managing mobility
in cellular networks
Unit V Wireless and Mobile networks: wireless links and network characteristics, CDMA, Wi-Fi: 6 lectures
802.11 wireless LANs, cellular internet access, mobility management principles, mobile IP,
managing mobility in cellular networks, impact of wireless and mobility on higher layer protocols,
Multimedia Networking: applications, streaming stored audio and video.
Recommended Books:
1. Computer Network, A.S. Tanenbaum, PHI, New Delhi.
2. Data and computer Communications, Stallings, PHI, New Delhi.
3. James F. Kurose and Keith W. Ross, “Computer Networking, A Top Down Approach”, 6th Edition, Pearson.
CS 5204 Computer Architecture: 4 Credits (3-1-0)
Unit I Brief on decades of computing-Study of parallel computers, Flynn’s classification, and elements 8 lectures
of modern computers, Performance, Metrics, and measures of parallelism, Processors hierarchy:
Design space processors, Instruction-set processors; CISC, RISC, scalar, vector processors;
Memory hierarchy: Inclusion, coherence and locality, Virtual memory technology and
replacement policies, TLB, paging, segmentation; Data flow and control flow architecture.
Instruction-level and thread level parallelism.
Unit II Computer memory system overview, Cache memory principles, Cache memory organization 4 lectures
and mapping techniques, shared memory and distributed memory organizations, sequential
and weak consistency models.
Unit III Pipelining: Linear pipeline processors, non-linear pipeline processors, arithmetic pipeline design,
12 lectures
Instruction pipeline design, Pipeline hazards and remedy, Super pipelining and Superscalar,
VLIW processors, Ultra SPARC processor example.
Unit IV Array processors and interconnection networks, SIMD computers and performance 13 lectures
enhancement, ILLIAC IV and BSP systems; Multiprocessors: Design issues of shared memory
multiprocessor, distributed memory multiprocessor, the cache coherence problem, Snoopy
bus protocols, directory-based protocols, hardware synchronization mechanisms, message
passing mechanisms: message routing schemes, deadlock and virtual channels, flow control
strategies. C.mmp, S-1, CRAY X-mp systems.
Unit V Scalable, multithreaded architecture; Fine-grain multicomputers, parallel program development
5 lectures
and Environments, supercomputers.
Recommended Books:
1. Computer Architecture A Quantitative Approach, David A Patterson & John L. Hennessy, Morgan Kaufmann
Publishers.
2. Data and Computer communications, Stallings, PHI, New Delhi.
3. Advance Computer Architecture and Parallel Processing, Hesham EL-Rewini & Mostafa ABD-El-BARR, WILEY Ed.
70
CS 6101 Compiler Design: 5 Credits (3-1-2)
Unit I Introduction to Compilers: The structure of a compiler; Definitions of programming languages:
The role of Lexical Analyzer, Regular Expressions, Finite automata, NFA, DFA, LEX, 12 lectures
Implementation of a lexical analyzer.
Unit II Context sensitive and Context free grammars, Derivation and Parse trees; Parsers, Shift- reduce
parsing, Operator-precedence parsing, Top-down & bottom-up parsing techniques, Predictive 12 lectures
parsing, LR parsers, Canonical collection of LR (0) items, Constructing SLR parsing tables.
Unit III Syntax directed translation schemes, implementation of syntax directed translators; Intermediate
Code, Postfix notation, Syntax trees, Three address code, Quadruples, Triples, Translation of 8 lectures
assignment statements, Boolean expressions, Translation with a top-down parser : Symbol
tables: Contents and Data structure representing scope information.
Unit IV Errors and recovery in compiling, Lexical and Syntactic phase errors, Semantic errors. Principal
sources of optimization, Loop optimization, The DAG representation of basic blocks, Global 5 lectures
data flow analysis, Loop invariant computations, Inductions, variable elimination, Some other
loop optimization
Unit V Code generation: Object programs, problems in code generation, A machine model, an example
of a simple code generator, Register allocation and assignment, Code generation from DAG, 5 lectures
Study of a practical compiler.
Recommended Books:
1. Compilers: Principles, Techniques and Tools, Aho, Ullman and Sethi, AWL Publication, New York, 2000.
2. Compiler Construction, N. Wirth, AWL Publication, New York, 2000.
3. Compiler Design in C, Holub, Prentice Hall of India, New Delhi, 2001.
71
Unit IV Architecture of 8051; display interface, keyboard interface, serial interface and parallel interface 12 lectures
and timers in 8051; memory map and system I/O map, instruction set and programming in 8051,
working with local mode and remote mode, idea regarding LCD routines, keyboard routines
and other system subroutines, communication using 8051 microcontroller.
Unit V Superscalar embedded processors, Microcontroller/ Microprocessor based industrial control 6 lectures
systems.
Recommended Books:
1. Intel Microprocessors, B.B.Brey, PHI,2006
2. Advanced Microprocessors and Peripherals- Ray & Bhurchandi, TMH, 2004
3. 8051 Microcontroller, Majdi & Majdi, PHI, 2002
4. Microcontrollers, D,Tabak, TMH, 2001
72
CS 5001 Image Processing: 4 Credits (3-0-2)
Unit I Introduction: Fundamentals concepts of digital image representation, fundamental steps in 9 lectures
image processing; elements of digital image processing systems: image acquisition,
storage,processing, communication and display. Fundamentals elements of visual perception,
simple image model, sampling and quantization, some basic relationships between pixels.
Unit II Image Enhancement in the spatial domain: Basic gray level transformations-histogram 8 lectures
processing-Enhancement using arithmetic/logic operations-Basics of spatial filtering-
comparison between smoothing and sharpening spatial filters.
Unit III Image Enhancement in the frequency domain: 1D Fourier transform-2D Fourier transform and 8 lectures
its Inverse. Smoothing & sharpening frequency domain filters (Ideal, Butterworth, Gaussian)-
Homomorphic filtering.
Unit IV Color Image processing: Colour fundamentals, Colour models, Pseudo Colour image processing, 8 lectures
colour image processing, Image restoration / degradation process, Noise Models, Image
segmentation.
Unit V Fundamentals of Image compression, Image compression models, Error-free compression, 9 lectures
lossless predictive coding-source and channel encoding/decoding. Lossy compression: lossy
predictive coding; DCT, DWT, JPEG.
Recommended Books:
Digital Image Processing Using Java, Efford , AWL Publication, New York, 2000.
Digital Image Processing, Woods & Gonglez, 2ed. Pearson Education,
The Computer Image- AWatt, F. Policarpo, AWL Publication, 1999.
73
Unit IIIGrid computing technologies- OGSA, sample use cases that drive the OGSA platform 10 lectures
components, OGSI and WSRF, OGSA basic services, security standards for grid computing.
Unit IV Grid computing tool kit- Globus toolkit, versions, architecture, GT programming model, a sample 9 lectures
grid service implementation.
Unit V High level grid services-OGSI.NET middleware solution, mobile OGSI.NET for grid computing 9 lectures
on mobile devices.
Recommended Books:
Grid Computing, Joshy Joseph, Craig Fellenstein, Pearson/PHI PTR-2003
Grid Computing: A Practical Guide to Technology and Applications, Ahmar Abbas, Charles River Media, 2003
75
Jecobi’s method and Gauss Seidel method. Solution of Transcendental equation by method of
Bisection, Regulafalsi, Newton’s method of tangents, Newton Raphson method, complex roots,
Muller’s method, Rate of convergence of Iterative methods, Polynomial Equations.
Unit III Interpolation and extrapolation: Finite Differences, Difference tables Polynomial Interpolation: 8 lectures
Newton’s forward and backward formula, Central Difference Formulae: Gauss forward and
backward formula, Stirling’s, Bessel’s, Everett’s formula. Interpolation with unequal intervals:
Langrange’s Interpolation, Newton Divided difference formula, Hermite’sInterpolation, Nevile
iterated interpolation.
Unit IV Numerical Integration and Differentiation: Introduction, Newtons-Cotes Closed quadrate, A 7 lectures
general quadrate formula of equidistant ordinates, Trapezoidal rule, Simpson’s 1/3 and 3/8 rule,
Boole’s rule, Waddle’s rule, Gass- Languor quadrate. Go firefight quadrate.
Unit V Solution of differential Equations: Picard’s Method, Euler’s Method, Taylor’s Method, Runge- 12 lectures
Kutta Methods, Predictor Corrector Methods, Automatic Error Monitoring and Stability of
solution Statistical Computation: Frequency chart, Curve fitting by method of least squares,
fitting of straight lines, polynomials, exponential curves etc, Data fitting with Cubic Sp-lines,
Regression Analysis, Linear and Non-linear Regression, Multiple regression, Statistical Quality
Control methods.
Recommended Books:
1. “Computer Oriented Numerical Methods”, - Rajaraman V, Pearson Education
2. “Applied Numerical Analyses” , - Gerald & Whealey, AW
3. “Numerical Methods for Scientific and Engineering Computations” - Jain, Iyengar and Jain, New Age Int.
4. Grewal B S, “Numerical methods in Engineering and Science”, Khanna Publishers, Delhi
5. T Veerarajan, T Ramachandran, “Theory and Problems in Numerical Methods, TMH
6. Pradip Niyogi, “Numerical Analysis and Algorithms”, TMH
7. Sastry S. S, “Introductory Methods of Numerical Analysis”, Pearson Education.
CS 6007: Parallel Computing : 4 Credits (3-1-0)
Unit I Evolution of computer architecture – dimensions of scalability- parallel computer models,
basic concepts of clustering, scalable design principles, parallel programming overview, 10 lectures
processes, tasks and threads, parallelism issues, interaction/communication issues, semantic
rules in parallel programs, system development trends, principles of processor design, pipelining
and super scalar processor, vector processors, array processor, SIMD processors, systolic
architecture, dataflow.
Unit II Hierarchical memory technology, cache coherence protocols, shared memory consistency,
distributed cache memory architecture, latency tolerance techniques, multithreaded latency 8 lectures
hiding.
Unit III Basics of interconnection networks, network topologies and properties, buses, crossbar and
multistage switches, software multithreading, synchronization mechanism. 8 lectures
Unit IV Parallel programming- paradigms and programmability, parallel programming models, shared
memory programming. 8 lectures
Unit V Introduction to Message passing, Routing and Switching mechanism in message passing,
Message passing programming models, Message passing versus Shared memory Architecture, 8 lectures
Message passing interface, parallel virtual machine.
Recommended Books:
1. Parallel Computing architecture : a hardware/software approach, David E. Culler, J.P. Singh, JMorgan Kaufman
Publishers, 1999.
2. Scalable Parallel Computing, Kai Hwang, Shi Wei Xu, Tata Mc Graw Hill, New Delhi, 2003.
3. Advance Computer Architecture and Parallel Processing, Hesham EL-Rewini & Mostafa ABD-El-BARR, WILEY
Ed.
CS 6008: Mobile Application Development: 4 Credits (3-0-2)
Unit I Introduction to Mobile Application development, Characteristics of mobile applications, History 8 lectures
of mobile application frameworks, Android Development Environment, Factors in Developing
Mobile Applications, Mobile Software Engineering, Frameworks and Tools, Generic UI
Development, Android User
Unit II User-interface design for mobile applications, Android UIs, VUIs and Mobile Apps, Designing 9 lectures
the Right UI, Multichannel and Multi-model UIs, Intents and Services, Android Intents and
Services, Characteristics of Mobile Applications, Successful Mobile Development.
76
Unit III Managing application data, Storing and Retrieving Data, Synchronization and Replication of 8 lectures
Mobile Data Getting the Model Right, Working with a Content Provider, Communications Via
Network and the Web, State Machine, Correct Communications Model, Deciding Scope of an
App, Wireless Connectivity and Mobile Apps
Unit IV Integrating with cloud services, Integrating networking, the OS and hardware into mobile, 9 lectures
Memory Management, Android Notifications and Alarms, Graphics Performance and
Multithreading, Graphics and UI Performance, Android Graphics and Multimedia, Mobile Agents
and Peer-to-Peer Architecture
Unit V Addressing enterprise requirements in mobile applications: performance, scalability, 8 lectures
modifiability, availability and security, Android Multimedia, Location,Mobility and Location
Based Services, Packaging and Deploying, Performance Best Practices, Android Field Service
App, Security and Hacking, Active Transactions, Applications testing, Testing methodologies
for mobile applications, Publishing, deployment, maintenance, and management
Recommended Books:
1. Valentino Lee, Heather Schneider, and Robbie Schell, Mobile Applications: Architecture, Design, and Development,
Prentice Hall, 2004.
2. Rajiv Ramnath, Roger Crawfis, and Paolo Sivilotti, Android SDK 3 for Dummies, Wiley, 2011
3. Jeff McWherter, Scott Gowell : Professional Mobile Application Development, Wrox Press
CS 6009: Combinatorial Design Theory for Computer Science: 4 Credits (3-0-2)
Unit I Introduction to Design Theory, Balanced Incomplete Block Designs, Incidence Matrices,
Isomorphisms and Automorphisms, Constructing BIBDs with Specified Automorphisms, 8 lectures
NewBIBDs from Old, Fisher’s Inequality, Symmetric BIBDs, Intersection Property, Residual
and Derived BIBDs, Projective Planes and Geometries, The Bruck-Ryser-Chowla Theorem
Unit II Difference Sets and Automorphisms, Quadratic Residue Difference Sets, Singer Difference
Sets, The Multiplier Theorem, Hadamard Matrices and Designs, Equivalence Between 9 lectures
Hadamard Matrices and BIBDs, Conference Matrices and Hadamard Matrices, A Product
Construction, Williamson’s Method, Regular Hadamard Matrices, Excess of Hadamard Matrices,
Bent Functions
Unit III Latin Squaresand Quasi groups, Steiner Triple Systems, The Bose Construction, The Skolem
Construction, Orthogonal Latin Squares, Mutually Orthogonal Latin Squares, MOLS and Affine 8 lectures
Planes, MacNeish’s Theorem, Orthogonal Arrays, Orthogonal Arrays and MOLS, Some
Constructions for Orthogonal Arrays, TransversalDesigns, Wilson’s Construction, Disproof
of the Euler Conjecture
Unit IV Pairwise Balanced Designs, Definitions and Basic Results, Necessary Conditions and PBD-
Closure, Steiner Triple Systems, (v, 4, 1)-BIBDs, Kirkman Triple Systems, The Stanton- 9 lectures
Kalbfleisch Bound, The Erd¨os-de Bruijn Theorem, Improved Bounds, Minimal PBDs and
Projective Planes, Minimal PBDs with ë > 1, t-Designs and t-wise Balanced Designs, Basic
Definitions and Properties of t-Designs, Some Constructions for t-Designs with t e” 3, Inversive
Planes, Some 5-Designs, t-wise Balanced Designs, Holes and Subdesigns
Unit V Applications of Combinatorial Designs, Authentication Codes, A Construction from Orthogonal
Arrays, Threshold Schemes, A Construction from Orthogonal Arrays, Anonymous Threshold 8 lectures
Schemes, Group Testing Algorithms, Two-Point Sampling, Monte Carlo Algorithms, Orthogonal
Arrays and Two-Point Sampling
Recommended Books:
1. Douglas R. Stinson: Combinatorial Designs Constructions and Analysis Spinger publishing 2003
2. Richard A. Brualdi: Introductory Combinatorics, 4th Edition, Pearson Education, 2004.
3. Ralph P. Grimaldi: Discrete and Combinatorial Mathematics,5th Edition, Pearson Education, 2004.
77
Department of Electrical Engineering
Programme: B. Tech in Electrical Engineering
Bridge Courses for Lateral Entrants (10+3 Diploma) to Degree Module
Semester -I (Bridge course)
Sl. No. Course Code Course Title L T P Cr
1. HS 4301 Elements of Economics 3 0 0 3
2. CY 4301 Comprehensive Chemistry 4 0 2 5
3. MA 4301 Comprehensive Mathematics -1 3 1 0 4
4. PH 4301 Comprehensive Physics 4 0 2 5
5. EE 4301 Electrical Engineering Materials 3 0 0 3
6. EE 4302 Digital Electronics 3 0 2 4
7. ES 4377 Comprehensive Programming in C/C++ (Audit) 2 0 4 4
Total: 24+4
Semester –II (Bridge Courses)
Sl. No. Course Code Course Title L T P Cr
1. HS 4401 Comprehensive Communication Skill 2 0 2 3
2. MA 4401 Comprehensive Mathematics -II 3 1 0 4
3. EE 4401 Electrical Circuits 3 1 2 5
4. EE 4402 Electrical Power Utilization 3 0 2 4
5. EE 4403 Switched Mode Power Supply Systems 3 0 2 4
6. EE 4404 Power Electronics - I 3 0 2 4
7. EE 4405 Signals and Systems 3 1 0 4
Total: 28
Year: I Semester: I
Sl. No. Course Code Course Title L T P Cr
1. PH 5101 Modern Physics 3 0 2 4
2. MA 5105 Engineering Mathematics – III D 3 1 0 4
3. EE 5101 Network Analysis 3 1 0 4
4. EE 5102 Power System-I 3 0 2 4
5. EE 5103 Power Electronics –II 3 0 2 4
6. EE 5104 Electromagnetic Fields 3 1 0 4
Total: 24
Year: I Semester: II
Sl. No. Course Code Course Title L T P Cr
1. MA 5201 Numerical Methods 3 0 2 4
2. MA 5202 Applied Probability and Statistics 3 1 0 4
3. EE 5201 Microprocessor and Its Applications 3 0 2 4
4. EE 5202 Control System Engineering 3 0 2 4
5. EE 5203 Advanced Electrical Machines 3 1 0 4
6. EE 5204 Power System -II 3 0 2 4
Total: 24
Courses offered to Other Department
Sl. No. Course Code Course Title Offered to L T P Cr
1. EE 5220 Instrumentation and Process Control AE 3 0 2 4
Year: II Semester: I
Sl. No. Course Code Course Title L T P Cr
1. EC 6120 Digital Signal Processing 3 0 2 4
2. EE 6101 Electrical Energy Management 3 0 2 4
3. EE 6102 Modern Control Engineering 3 0 0 3
4. EE 60** Elective - I 3/2 1/0 0/2/4 4
5. ** 60** Open Elective 3/2 1/0 0/2 3
6. EE6199 Project Part - I 0 0 4 2
7. EE6198 Industrial Training and Seminar (Audit) 0 0 4 2
Total: 21+2
78
Open Electives
Sl. No. Course Code Course Title L T P Cr
1. EE6041 Substation Automation 3 1 0 4
Year: II Semester: I
Sl. No. Course Code Course Title L T P Cr
1. EC 6120 Digital Signal Processing 3 0 2 4
2. EE 6101 Electrical Energy Management 3 0 2 4
3. EE 6102 Modern Control Engineering 3 0 0 3
4. EE 60** Elective - I 3/2 1/0 0/2/4 4
5. ** 60** Open Elective 3 1/0 0/2 4
6. EE6199 Project Part - I 0 0 4 2
7. EE6198 Industrial Training and Seminar (Audit) 0 0 4 2
Total: 21+2
Open Electives
Sl. No. Course Code Course Title L T P Cr
1. EE6041 Substation Automation 3 1 0 4
2. EE6042 Solar PV Fundamentals, Technologies and Applications 3 0 2 4
Year: II Semester: II
Sl. No. Course Code Course Title L T P Cr
1. EE 6201 Flexible AC Transmission System 3 1 0 4
2. EE 6202 Power Electronics based Industrial Drives 3 0 2 4
3. HS 6201 Human Resource Management 3 0 2 4
4. EE 60** Elective – II 3 1/0 0/2 4
5. EE 60** Elective – III 3 1/0 0/2 4
6. EE 6299 Project Part - II 0 0 8 4
7. EE 6289 Seminar 0 0 2 1
8. ED 6288 Extracurricular Activities & Discipline 0 0 0 2
Total: 25+2
List of Electives
Elective-I
Sl. No. Course Code Course Title L T P Cr
1. EE 6010 Computer Aided Design of Electrical Machines 3 1 0 4
2. EE 6011 Power System Economics 3 0 2 4
3. EE 6012 Computer Application in Power System 2 0 4 4
4. EE 6013 Operation Research 3 1 0 4
5. EE 6014 CMOS VLSI Design 3 0 2 4
6. EE 6015 Basic Communication Engineering 3 1 0 4
7. EE 6016 Artificial Intelligence 3 1 0 4
Elective-II
Sl. No. Course Code Course Title L T P Cr
1. EE 6020 Electrical and Electronics Measurement 3 0 2 4
2. EE 6021 Power System Instrumentation & Control 3 1 0 4
3. EE 6022 Advanced Microprocessors and Applications 3 0 2 4
4. EE 6023 Network Synthesis 3 1 0 4
5. EE 6024 Bio-medical Instrumentation 3 0 2 4
6. EE 6025 Instrumentation and Process Control 3 0 2 4
7. EE 6026 Optimization Techniques and Engineering Applications 3 1 0 4
Elective-III
Sl. No. Course Code Course Title L T P Cr
1. EE 6030 Safety and Reliability Engineering 3 1 0 4
2. EE 6031 Microprocessor based Industrial Drives 3 1 0 4
3. EE 6032 Power System Stability 3 1 0 4
79
4. EE 6033 Extra HVDC/AC Transmission 3 1 0 4
5. EE 6034 Generalized Machine Theory 3 1 0 4
6. EE 6035 Power System Reliability 3 1 0 4
7. EE 6036 High Voltage Engineering 3 0 2 4
80
EE 4401 Electrical Circuits : 5 Credits (3-1-2)
Unit-I Fundamental Laws-KCL & KVL both for dc & ac circuits. Network Analysis: Nodal Analysis, 8 Lecture
Mesh Analysis, Network Equations for R-L-C circuits & Mutually coupled circuits, Star/
Delta Transformations
Unit-II Network Theorems: Superposition, Thevenin’s, Norton’s, Reciprocity, Maximum Power 10 Lecture
Transfer, Tellegen’s, Substitution, Compensation and Millman’s Theorems
Unit-III Electrical Transients: DC and AC Transients in R-L circuit, Sinusoidal Steady-State Analysis 8 Lecture
(Single-Phase AC Circuits): Phasor Algebra, Response of General Networks, Resonance in
series & parallel circuits
Unit-IV Polyphase circuits: Three-phase voltage, current and power, Star and Delta connected 8 Lecture
circuits, Balanced and unbalanced 3-phase circuits
Unit-V Two-Port Networks 8 Lecture
Total Lectures 42
Recommended Books:
1. Theory and Problems of Electric Networks by B.R. Gupta, S.Chand Publications
2. Networks and Systems by D. Roy Chaudhury, New Age International
3. Problems in Electrical Engineering by Parker Smith, CBS Publication
4. Electric Circuits, Schaum Series.
81
Unit-V Flyback converters: introduction, applications, basic operations in discontinuous and 8 Lecture
continuous mode, output filter design considerations for magnetic and filter circuit etc.
under discontinuous and continuous modes, applications.
Total Lectures 42
Recommended Books:
1. Switching Power Supply Design, A. I Pressman, McGraw Hill Inc., New Delhi, 1991.
2. High Frequency Switching Power Supplies: Theory & Design, George Chryssis, McGraw Hill Book Company, New
Delhi, 1995.
3. Power Switching Converters, Simon Ang, A. Oliva, Taylor& Francis, London, 2004.
4. Power Electronics: Converters, Applications & Design, Mohan, Undeland & Robbins, John Wiley & Sons, 2001
5. Power Electronics: Circuits, Devices & Applications, M. H. Rashid, Prentice Hall of India, New Delhi, 2001.
82
Unit-V Z-Transformation of discrete time signals and systems: region of convergence, properties, 11 Lecture
generalization of Parseval’s theorem; Z-domain analysis of linear discrete-time systems,
system functions, poles and zeros of systems and sequences, stability, minimum phase
systems. Sampling theorem: spectra of sampled signals; reconstruction: Ideal interpolator,
zero-order hold, first-order hold; aliasing and its effects.
Total Lectures 42
Recommended Books:
1. A.V. Oppenheim, A.S. Willsky and I.T. Young, “Signals and Systems”, PHI, 1983
2. R.F. Zeimer, W.H. Tranter and D. R. Fannin, “Signals and Systems-Continuous and Discrete”, 4th edition, PHI, 1998
3. B. P. Lathi, “Signal Processing and Linear Systems”, Oxford University Press, 1998
4. Douglas K. Lindner, “Introduction to Signals and Systems”, McGraw-Hill
83
EE 5103 Power Electronics-II : 4 Credits (3-0-2)
Unit-I AC–DC converters: introduction to single phase converters; dual converter etc., effects of 10 Lecture
free-wheeling diode in the converter output; three phase converters- classifications and
performance analysis of various types of 3-phase converters viz. half wave and full wave
converters, semi-converter, dual converter etc. with R, R-L & R-L-E loads; effects of source
impedance on converter performance; issues of line current harmonics, power factor,
distortion factor of ac to dc converters.
Unit-II DC–DC converters: classification, applications, principle of operation, control strategies of 10 Lecture
chopper, types of dc choppers, step-up chopper, steady state time domain analysis, SCR
commutation in chopper circuits; multiphase choppers, analysis of buck, boost, buck-
boost and Cuk converters.
Unit-III DC–AC converters: classification and industrial applications; voltage source inverters: 10 Lecture
single phase VSI circuits, three phase VSI with 1800 and 1200 conduction modes inverters
using star and delta connected loads; current source inverter- single phase and three phase
CSI circuits; output voltage control of single phase inverters using various PWM
techniques.
Unit-IV AC voltage controller: classification and industrial applications, control strategies of ACVC, 6 Lecture
single phase half wave and full wave ACVC analysis with R and R-L loads, Three phase
ACVC.
Unit-V Cycloconverters: classification and industrial applications, single phase to single phase 6 Lecture
cycloconverters (step-up and step down), single phase to three phase cycloconverter,
three phase to single phase cycloconverter, three phase to three phase cycloconverter,
power factor control using cycloconverter.
Total Lectures 42
Recommended Books:
1. Power Electronics: Converters, Applications & Design, Mohan, Undeland & Robbins, John Wiley & Sons, 2001
2. Power Electronics: Circuits, Devices & Applications, M. H. Rashid, Prentice Hall of India, New Delhi, 2001.
3. Power Electronics, P. S. Bimbhra, Khanna Publishers., New Delhi, 1999.
4. Power Electronics, Sen, Tata McGraw Hill, New Delhi, 1995.
5. Power Electronics, Harish C. Rai, Galgotia Publishers, New Delhi, 1999
6. Fundamentals of Power Electronics and Drives, Dhanpat Rai & Co. (PVT.) LTD., New Delhi, 2006.
7. Power Electronics, M. D. Singh, K. B. Khanchandani, Tata McGraw Hill, New Delhi, 2007.
84
EE 5201 Microprocessor and Its Applications : 4 Credits (3-0-2)
Unit-I Review of basic computer organization and evolution of computers and microprocessors, 6 Lecture
concepts on bus organization, data representation, memory organization.
Unit-II Architecture of Intel 8085A Microprocessor: block diagram and their descriptions, pin out 10 Lecture
diagram of Intel 8085A, de-multiplexing of buses, control signals and flags, instruction sets:
introduction to 8085 Intel instructions, classification, format and addressing modes of
instructions.
Unit-III Programming in 8085A: data transfer instructions, arithmetic, logic and branch operations, 10 Lecture
rotate and compare operations; instructions related to the stack operations, assembly
language program for addition, subtraction, multiplication, division for decimal and
hexadecimal one byte and multi-byte numbers, one’s and two’s complement, largest and
smallest among the data array, block of data moving, looping, counting and time delay
subroutines.
Unit-IV Interrupts: Intel 8085 software and hardware interrupts and their working mechanisms, 10 Lecture
concept of vectored interrupts, maskable and non-maskable interrupts, interrupts priorities,
usage of RIM and SIM instructions; stack and subroutines, concept of stack memory and
calling subroutines.
Unit-V Interfacing concepts: basic interfacing concepts, memory mapped and peripheral mapped I/ 6 Lecture
O, Interrupt controlled I/O; interfacing peripherals: introduction to I/O addressing, study of
peripheral interfacing devices such as 8255, 8257, 8253 and 8251.
Total Lectures 42
Recommended Books:
1. Microprocessor Architecture Programming & Applications, R.S. Gaonkar, New Age International., New Delhi, 1993
2. Microprocessor Interfacing and Applications. R. singh and B. P. Singh
3. Digital Computer Electronic – An Introduction to Micro-Computers, by A.P .Malvino, TMH, New Delhi, 1997
4. Fundamentals of Microprocessors and Microcomputers by B. Ram, Dhanpat Rai and Sons
5. Microprocessor Data Book by BPB Publications.
EE 5202 Control System Engineering : 4 Credits (3-0-2)
Unit-I Open-loop and Closed-loop System, Mathematical Modeling of Linear Systems 6 Lecture
Unit-II Block Diagram, Signal Flow Graph, Feedback Characteristics of Control Systems, Control 10 Lecture
System Components, Error Detectors, Servomotor, Servo-Amplifier, Synchros, Stepper Motor
Unit-III Time Domain Analysis, Transient response of First & Second Order Systems, Steady state
error and Error coefficient, Stability concepts, Routh-Hurwitz criterion, Root Locus 10 Lecture
Techniques
Unit-IV Frequency Response Analysis: Nyquist Plot, Bode Plot (Gain margin, Phase margin),
Constant M and N Circle, Nichol’s chart 10 Lecture
Unit-V Introduction to Design, Control Action, Lead Lag, Lead, Lead-lag compensators design,
Feedback Compensation, PID controllers. 6 Lecture
Total Lectures 42
Recommended Books:
1. Control Engineering by Nagrath & Gopal, New Age International.
2. Modern Control Engineering by Ogata, PHI
3. Automatic Control System by Kuo, PHI
4. Feedback Control of Dynamic Systems by Gene E. Franclin, J.D. Powel and A.E. Naeini
5. Analog and Digital Control System Design by C T Chen
86
EE 6101 Electrical Energy Management : 4 Credits (3-0-2)
Unit-I Non-conventional Energy Resources: solar photovoltaic systems, solar cell characteristics, 8 Lecture
effect of variation of isolation and temperature, maximizing the solar PV output and load
matching, solar collected. Wind energy, wind-solar hybrid system, technology of tidal energy.
MHD generation. Feasibility of non-conventional resources in present industrial scenario.
Case studies from industries about use of non-conventional resource.
Unit-II Energy Conservation in Industrial Infrastructure: Energy loads in buildings. Reduction in 10 Lecture
plant energy usage, conservation in lighting load with case studies. Energy conservation
trough Demand Side Management with case studies. Maximum Demand control in industries
with case studies. Fuel conservation through optimal loading of synchronized generators.
Energy conservation through power factor improvement with case studies. Energy
conservation by changing manufacturing sequence.
Unit-III Energy Conservation in Electrical Drives: Introduction of industrial drives, controlling 9 Lecture
methods of different drives. Losses in electrical drive systems. Methods of energy savings
in industrial drives with case studies. Quality of utility power and its effect in industries.
Harmonic analysis of industrial power.
Unit-IV Industrial Energy Use Profiles: The concept of cogeneration, cogeneration alternatives. 9 Lecture
Improvement of efficiency in captive plants using auxiliary devices. Potential of energy
savings in foods industry, sugar industry, primary metals industry, paper industry, cement
industry and any other industries.
Unit-V Energy Audit: The energy audit concept. Elements of energy audit. Presentation of energy 6 Lecture
audit report. Analysis of energy audit report of different industries.
Total Lectures 42
Recommended Books:
1. Energy Management by P. W. Callaghan, McGraw Hill International.
2. Renewable Energy Sources: J. W. Twidell, ELBS Publishing Company
3. Energy conservation and utilization by S.C.Tripathy, S.Chand and Co.
87
EE 6010 Computer Aided Design of Electrical Machines : 4 Credits (3-0-1)
Unit-I Base problem in modern power equipment, basic design methodology and engineering 7 Lecture
considerations.
Unit-II Computerization of design procedures. 9 Lecture
Unit-III Optimization techniques and their application to design problems. 9 Lecture
Unit-IV Transformer design, dc machine design. 10 Lecture
Unit-V AC machine design. 7 Lecture
Total Lectures 42
Recommended Books:
1. A Course in Electrical Machine Design by A.K. Sawhney, Dhanpat Rai & Sons.
2. Computer Aided Design of Electrical Equipment by M. Ramamurthy, Affiliated East West Press Pvt. Ltd.
3. Performance and Design of Electrical Machines by M.G. Say, ELBS Publishers.
4. Electrical Machine Design Data Book by G. Gangadhara, R. Pallani.
88
EE 6014 CMOS VLSI Design : 4 Credits (3-0-2)
Unit I Introduction to CMOS technology and layout: integrated circuit technology, basic MOS 3 Lecture
transistors, CMOS fabrication.
Unit II Basic electrical properties of MOS circuits: drain-to-source current versus voltage 10 Lecture
relationships, aspects of MOS threshold voltage, pass transistor, NMOS and CMOS inverter,
MOS circuit model, Latch-up in CMOS.
Unit III MOS circuit design processes: MOS layers, Stick diagrams, scaleable CMOS design rules, 3 Lecture
symbolic diagrams.
Unit IV Circuit characterization and performance estimation: delay estimation, logical effort and 13 Lecture
transistor sizing, power dissipation, design margin; circuit simulation: Spice introduction,
device models, device characterization, circuit characterization.
Unit V Computational and sequential circuit design: circuit families, low power logic design, 13 Lecture
sequential static circuits, Latch and Flip design; datapath design: adder and multiplier.
Total Lectures 42
Recommended Books:
1. CMOS VLSI Design: A Circuits and Systems Perspective, 3rd ed, Addison Wesley, 2005 by Weste & Harris.
2. Digital Design, 3rd edition by M. Morris Mano.
3. Principles of CMOS VLSI design by N H E Weste & K Eshraghian
4. Modern VLSI Design: System on Silicon by Wayne Wolf
89
Unit-V Fuzzy logic: fuzzy set theory, fuzzy logic systems, membership functions, fuzzy interference, 8 Lecture
uncertainty in information, fuzziness in expert system and neural networks, genetic
algorithms, case studies.
Total Lectures 42
Recommended Books:
1. Artificial Intelligence by Rich and Knight, TMH.
2. Artificial Intelligence and Instrument systems by Padhy, Oxford.
3. Artificial Intelligence by N. J. Nilson, Elsvier.
4. A Computational Investigation Into the Human Representation and Processing of Visual Information by David
Marr., W. H. Freeman
4. Artificial Intelligence and Expert System by Patterson, PHI.
5. Artificial Intelligence by Patrick Henry Winson, AWL.
6. Pattern Recognition and Machine Learning, Christopher M. Bishop, Springer
90
Unit-V Design methodology of solar PV systems, design of off-grid PV systems, and design of 6 Lecture
grid-connected PV systems, hybrid PV systems, and life cycle cost analysis.
Total Lectures 42
Recommended Books:
1. Solar PV fundamentals and technologies and Applications by C. S. Solanki. Second edition PHI Learning Pvt. Ltd,
2011.
2. Solar Electricity- A Practical Guide to Designing and Installing Small Photovoltaic Systems by Simon Roberts,
Prentice Hall.
Unit-II Types of transducers, active transducers, passive transducers, ADC and DAC Transducers. 8 Lecture
Unit-III Measurement of temperature, pressure, flow, speeds etc. 9 Lecture
Unit-IV Microprocessor ,techniques, interfacing system to microprocessor 9 Lecture
Unit-V Software and computer application to instrumentation, types of process control, PID 6 Lecture
Controller & Its Applications.
Total Lectures 42
Recommended Books:
1. Introduction to Instrumentation and Control, A.K Ghosh, PHI, New Delhi 2000.
2. Principle of Process Control, Patranabis, TMH, New Delhi 1999.
3. Process Control Instrumentation Technology, Johnson, Prentice Hall Inc., NJ, 1997.
93
EE 6026 Optimization Techniques and Engineering Applications : 4 Credits (3-1-0)
Unit-I Introduction: Introduction, Engineering application of optimization, statement of an 6 Lecture
optimization, problem, classification of optimization problems.
Unit-II Classification optimization techniques: Single variable and multivariable optimization with 8 Lecture
and without constraints.
Unit-III Linear programming: Single and multi-variable optimization, Graphical interpretation. Pivot 8 Lecture
reduction of general systems of equations. Simplex method.
Unit-IV Non-linear programming: Unimodel function, quadratic interpolation method. Unconstrained 10 Lecture
optimization Techniques: Direct search method, random search method, univariate method
and pattern search method. Basic idea of Hooks & Jeaves, Simplex Powell and Newton
methods.
Unit-V Constrained optimization: Characteristics of constrained problem. The complex method, 10 Lecture
method of feasible directions; transformation techniques, interior penalty function and
exterior penalty function method.
Total Lectures 42
Recommended Books:
1. Operation Research an Introduction, H.A. Taha, Macmillan Co.
2. Optimization Theory and Application, S.S. Rao, Wiley Eastern Ltd.
3. Optimization Techniques an introduction, L.R. Foulds
4. Optimization Methods for Engineering Design, A L Fox, Addison Wesley, 1972
96
Department of Electronics Engineering
Programme: B.Tech. in Electronics Engineering
Bridge courses for Lateral Entrants (10+3 Diploma) to Degree Module
Year Bridge - I Semester I L T P Credit
1 HS 4301 Elements of Economics 3 0 0 3
2 PH 4301 Comprehensive Physics 4 0 2 5
3 CY 4301 Comprehensive Chemistry 4 0 2 5
4 MA 4301 Comprehensive Mathematics-I 3 1 0 4
5 EC-4301 Signal and Systems 3 0 2 4
6 EC-4302 Microprocessor and Computer Organisation 3 0 2 4
25
Year Bridge-I Semester II L T P Credit
1 HS 4401 Comprehensive Communication Skill 2 0 2 3
2 MA 4401 Comprehensive Mathematics-II 3 1 0 4
3 EC-4400 Linear Integrated Circuit 3 0 2 4
4 EC-4401 Industrial Electronics 3 0 2 4
5 EC-4402 Microcontroller and its applications 3 0 2 4
6 EC-4403 Network Analysis and Synthesis 3 1 0 4
23
Both Degree bridge lateral students and vertical students combine
Year I Semester I L T P Credit
1 PH 5101 Modern Physics 3 0 2 4
2 MA 5104 Engineering Mathematics III C 3 1 0 4
3 EC 5100 Digital Design using HDL 3 1 2 5
4 EC 5101 Microelectronics 3 1 0 4
5 EC 5102 Digital Signal Processing 3 0 2 4
6 EC 5103 Electromagnetic Theory 3 1 0 4
25
Year I Semester II L T P Credit
1 MA 5202 Applied Probability and Statistics 3 1 0 4
2 EC 5200 VLSI Circuits 3 1 2 5
3 EC 5201 Embedded System 3 1 0 4
4 EC 5202 Microwave Engineering 3 0 2 4
5 EC 5203 Analog Communication Theory 3 1 0 4
6 EC 5204 Analog and Digital Control 3 1 0 4
25
Year II Semester I L T P C
1 ** 60**Open Elective 3 0 0 3
2 EC 6100 Antenna and Radar Engineering 3 1 2 5
3 EC 6101 Digital Communication 3 0 2 4
4 EC 60** Departmental Elective-I 3 0 0 3
5 EC 60** Departmental Elective-II 3 0 0 3
6 EC 6179 Industrial Training(Audit) 0 0 0 2
7 EC 6199 Project Part I 0 0 4 2
8 *EC 6120 (EE) Introduction to Digital Signal Processing 3 0 2 4
22
Year II Semester II L T P C
1 EC 6200 Computer Communication and Network 3 0 2 4
2 EC 6251 Comprehensive Viva 0 0 4 2
3 EC 60** Departmental Elective-III 3 0 0 3
4 EC 60** Departmental Elective-IV 3 0 0 3
5 HS 6201 Human Resource and Management 3 0 2 4
6 EC 6299 Project Part II 0 0 8 4
7 ED-6288 Extracurricular activities 0 0 0 2
22
97
L T P C
For Semester I and II (Detail Syllabus Available at Institute Website) 3 0 0 3
1 EC 6010 Artificial Neural Networks and its Application 3 0 0 3
2 EC 6011 Robotics 3 0 0 3
3 EC 6012 Multimedia Communications and Networking 3 0 0 3
4 EC 6013 Data Compression. 3 0 0 3
GROUP 1 (Elective I & II)
22 EC 6031 MEMS 3 0 0 3
23 EC 6032 Nano-electronics 3 0 0 3
24 EC 6033 Introduction to Plasmonics 3 0 0 3
25 EC 6034 Speech Processing 3 0 0 3
26 EC 6035 Satellite Communication 3 0 0 3
27 EC 6036 Biomedical Engineering 3 0 0 3
28 EC 6037 Wireless Sensor Networks. 3 0 0 3
29 EC 6038 Digital Signal Processors and Applications. 3 0 0 3
30 EC 6039 Digital Integrated Circuit 3 0 0 3
31 EC 6040 Advanced Computer Architecture. 3 0 0 3
32 EC 6041 Low Power VLSI Design. 3 0 0 3
33 EC 6042 Introduction to Computing and programming using Python 3 0 0 3
34 EC 6043 VLSI Digital Signal Processing Systems 3 0 0 3
35 EC 6044 ARM System Architecture 3 0 0 3
36 EC 6045 Machine Learning 3 0 0 3
List of Open Electives for Degree Non-ECE final year students: L T P C
1 EC 6091 Data Compression 3 0 0 3
2 EC 6092 Digital Image Processing 3 0 0 3
3 EC 6093 Microcontroller application and System design 3 0 0 3
4 EC 6094 Computer Networking 3 0 0 3
98
EC 4301 Signal and Systems : 5 Credits (3-1-2)
Unit I Continuous and discrete time signals: Classification of Signals, Transformation of independent
9 lectures
variable of signals, Basic continuous-time and discrete-time signals.
Unit II Basic system properties. Analysis of Continuous-time and Discrete-time LTI Systems and their
9 lectures
properties. Linear constant co-efficient differential and difference equations.
Unit III Fourier-series and Fourier Transform representation of Continuous-time Signals and their
properties. Discrete-Time Fourier-series and Discrete-Time Fourier Transform representation 8 lectures
of discrete-time Signals and their properties.
Unit IV Laplace Transform and its properties. Unilateral Laplace Transform. Analysis of LTI systems
using Laplace-transform. Z-transform and its properties. Unilateral Z- Transform. Analysis 8 lectures
of LTI systems using Z - transform.
Unit V Sampling and reconstruction of band limited signals. Low pass and band pass sampling
8 lectures
theorems. Aliasing. Anti-aliasing filter. Practical Sampling-aperture effect.
Recommended books :
1. Signals & Systems, Alan V. Oppenheim, Alan S. Willsky , S. Hamid Nawab, 2nd edition, Pearson Education.
2. Signals and Systems, S.Haykin and B. VanVeen , Wiley.
3. Signal Processing and Linear Systems, B.P.Lathi, PHI
4. Principles of Linear Systems and Signals, B.P. Lathi, Oxford.
Recommended books :
1. Computer Organization, Carl Hamacher, Zvonko Vranesic, Safwat Zaky, McGraw Hill International
2. Computer Architecture and Organization, J.P.Hayes Mc Graw Hill International
3. Microprocessor Architecture Programming Application with the 8085/8080A, R.S. Gaonkar, Prentice Hall of
India
4. Introduction to Microprocessors, A.P.Mathur Tata McGraw Hill
5. Fundamental of Microprocessor and Microcomputers, B. Ram, Dhanpat Rai & Sons.
99
EC-4400 Linear Integrated Circuits : 4 Credits (3-0-2)
Unit I Feedback amplifier: Feedback concept, characteristics of negative and positive feedback.
Four feedback topologies, effect of negative and positive feedback on input impedance, output 10 lectures
impedance, voltage gain, band width, noise and frequency response.
Unit II OPAMP: characteristics, open loop gain, negative feedback configurations, amplifier,
10 lectures
differential amplifiers, linear and non-linear applications.
Unit III OSCILLATORS: Classification, Barkhausen Criterion, frequency stability, Tuned based Oscillators,
Hartley Oscillator, Colpitts Oscillators, Clapp Oscillator, Crystal Oscillator, Phase Shift
10 lectures
Oscillator, Wein Bridge Oscillator, voltage controlled oscillator Oscillator circuit design using
BJT, FET and OP-AMP
Unit IV ACTIVE FILTERS, COMPARATORS and CONVERTERS: classification and characterization of filters,
types of active filters-first order and second order. Comparator and its characteristics, zero
crossing detector, voltage limiters, absolute value detectors, analog multipliers and types of 12 lectures
signal generators. Converters : types of ADC and DAC, working principle, characteristics.
PLL and its applications.
Recommended books :
1. Operational Amplifiers with Linear Integrated Circuits 4th Edition, Author(s): William D. Stanley, Publisher:
Pearson (2004)
2. Amps and Linear Integrated Circuits 4 Edition Author(s): Ramakant A.Gayakwad Publisher: PHI Learning (2009)
3. Electronics Principles By: A. P. Malvino,Tata McGraw Hill
4. Microelectronic By: adel S. Sedra and C Smith,Oxford university press.
5. Integrated Electronic circuits By: J. Millman and C.C.Halkias, TMH.
6. Pulse Digital and Switching Waveforms By: Taub and Shilling, TMH.
7. Electronic Devices and Circuits, Fourth Edition by David A. Bell. (PHI). Electronics Circuits By: D. Shilling, Tata
McGraw
Recommended books :
1. Ned Mohan et.al, Power Electronics, John Wiley and Sons, 1989
2. Sen P.C., Power Electronics, Tata Mc Graw Hill,2003
3. Rashid, Power Electronics. Prentice Hall India,1993
4. G.K. Dubey et.al, Thyristorised Power Controllers, Wiley & Sons, 2001
100
EC 4402 Microcontrollers and Applications : 4 Credits (3-0-2)
Unit I The 8051 microcontroller: Evolution of microcontrollers, overview of the 8051 family. 7 lectures
Unit II Assembly language programming: Arithmetic, logical, jump, loop, call instructions. Input/
9 lectures
Output port programming: pin descriptions of the 8051, I/O programming; bit manipulation
Unit III Addressing modes: Immediate and register addressing modes; memory accessing. Timer/
Counter programming. 9 lectures
Unit IV Serial communication: basics, connection to RS232 and programming Interrupts: different
types and their programming 8 lectures
Unit V Real world interfacing: LCD, ADC, Sensors, stepper motors, keyboards 9 lectures
Recommended books :
1. The 8051 Microcontroller and Embedded Systems, M. A. Mazidi, and J.G. Mazidi, Pearson Education
2. Microcontroller Projects in C for 8051, D. Ibrahim, Newnes
EC-4403 Network Analysis and Synthesis : 4 Credits (3-1-0)
Unit I Review of Network Theorems, Formulations of network equations: First – order systems, Natural
response, Initial conditions, complete response of First- order systems, zero state and zero
input responses. Second order system, Natural response, Overdamped, Underdamped and 12 lectures
critically damped case. Geometry of plane, unit-step and unit impulse response, linear system
with sinusoidal inputs, impedance and admittance, power, concept of Complex frequency.
Unit II Transform Impedances Network functions of one port and two port networks, concept of poles
and zeros, properties of driving point and transfer functions, time response and stability from
pole zero plot, frequency response. Characterization of LTI two port networks ZY, ABCD and 9 lectures
h-parameters, reciprocity and symmetry. Inter relationships between the parameters, inter-
connections of two port networks.
Unit III Positive real function; definition and properties; properties of LC, RC and RL driving point
functions, synthesis of LC, RC and RL driving point immittance functions using Foster and 11 lectures
Cauer first and second forms.
Unit IV Graph of a Network, definitions, tree, co tree , link, basic loop and basic cut set, Incidence matrix, 10 lectures
cut set matrix, Tie set matrix Duality, Loop and Node methods of analysis.
Recommended books :
1. “ Network Analysis”, M.E. Van Valkenburg, Prentice Hall of India
2. “An Introduction to Circuit analysis: A System Approach” Donald E. Scott McGraw Hill Book Company.
3. ‘Circuit Theory” A.Chakrabarti, Dhanpat Rai and Co.
4. “Networks and Systems” D.Roy Choudhary, Wiley Eastern Ltd.
5. “Engineering Circuit analysis” W.H. Hayt and Jack E-Kemmerly, Tata McGraw Hill.
6. Linear Circuits, Ram Kalyan, Oxford University Press
EC-5100 Digital Design using HDL : 5 Credits (3-1-2)
Unit I Introduction to sequential circuits: Latch, R-S, J-K, D flip flops, Master Slave arrangement,
6 lectures
Edge triggered flip flops, shift registers, asynchronous and synchronous counters.
Unit II Design tools: Introduction to HDL Basic features of HDL. Simulation and synthesis. Basic HDL
modeling techniques. Algorithmic level design. Register Level Design. HDL- based design 12 lectures
techniques. Modeling for synthesis.
Unit III Synchronous sequential finite state machines: Synchronous analysis process, design approaches,
state reduction, design of next state decoder and output decoder, design of counters and 8 lectures
decoders, code sequence detector, sequential code generators
Unit IV Algorithmic State Machine (ASM): ASM Chart, ASM block, Design using FFs,Design using
9 lectures
multiplexers and PLAs.
Unit V Asynchronous Sequential finite state machines: Need for asynchronous circuit analysis, cycles
10 lectures
and races, Hazards, map entered variable approaches to asynchronous design.
101
Recommended books :
1. An Engineering approach to Digital Design, William J. Fletcher PHI
2. VHDL Primer, J. Bhaskar
3. Verilog HDL Synthesis, A Practical Primer, J. Bhaskar
4. Digital Design: Principles and Practices, John F. Wakerly, PHI
5. Fundamentals of Digital Circuits, A. Anand Kumar, PHI
6. Digital Design. Morris Mano. PHI
7. Digital Principles and Design Donald D. Givone TMH
EC-5101 Microelectronics : 4 Credits (3-1-0)
Unit I Fundamentals of Semiconductors: Crystal Structure, Crystal Plane, Electronic Structure of
Elements, Valence Band Model of Solid, Energy Band Model of Solid, E-K Diagram, Effective 5 lectures
mass, Direct and Indirect semiconductor. Semiconductors: Silicon, Germanium, GaAs, Density
of States, Fermi Dirac Distribution, Equilibrium Carrier density, intrinsic and extrinsic Fermi levels.
Compensation and space charge neutrality.
Unit II Carrier Transport Phenomena and PN Junction: Drift velocity, Drift current, Diffusion of Carriers,
Diffusion Current. Hall effect, Generation and Recombination, Continuity equation, Carrier
injection: diffusion length, PN junction formation, energy band diagram of PN junction at 7 lectures
equilibrium, reverse and forward biased conditions, Built in potential and electric field, space
charge width, junction capacitances, current voltage equation.
Unit III BJT: BJT Operation. Amplification with BJTs. Minority Carrier Distributions and Terminal Currents.
Solution of the Diffusion Equation in the Base Region. Evaluation of the Terminal Currents.
Approximations of the Terminal Currents. Current Transfer Ratio. Coupled-Diode Model. Charge 10 lectures
Control Analysis. Switching. Cut-off. Saturation. The Switching Cycle. Specifications for
Switching Transistors. Drift in the Base Region. Base Narrowing. Avalanche Breakdown. Injection
Level; Thermal Effects. Base Resistance and Emitter Crowding.
Unit IV FET: Transistor Operation. Load Line. Amplification and Switching. Junction FET. Pinch-off and
Saturation. Gate Control. Current-Voltage Characteristics, Metal-Semiconductor FET. GaAs
MESFET. High Electron Mobility Transistor. Short Channel Effects. Ideal MOS Capacitor. 10 lectures
Effects of Real Surfaces. Threshold Voltage. MOS Capacitance-Voltage Analysis. Current-Voltage
Characteristics of MOS Gate Oxides. MOS Field-Effect Transistor. Output Characteristics. Transfer
Characteristics. Mobility Models. Short Channel MOSFET I-V Characteristics. Control of
Threshold Voltage. Substrate Bias Effects. Subthreshold Characteristics.
Unit V Photonic Devices: LED: Luminescence process of LED material, device configuration and quantum
efficiency, LED structures: Hetero junction LED, Burros surface-emitting LED, Edge emitting 6 lectures
LED.
Unit VI LASER: Basic principles, semiconductor Laser, Population Inversion at a junction, emission 4 lectures
spectra, basic semiconductor Laser, DH Laser, Quantum Laser, Photo voltaic effect, amorphous
Si solar cell, Photo conductors, PIN diode, APD.
Recommended books :
1. Solid State Electronic Devices, B. G. Streetman PHI
2. Microelectronics Devices, E. S. Young McGraw Hill International, New York.
3. Micro Electronics, L. Millman, Arvin Grabel Tata McGraw Hill, New Delhi.
4. Semiconductor Device Fundamentals, R. Pierret, Pearson
EC-5102 Digital Signal Processing : 4 Credits (3-0-2)
Unit I Review of Discrete-time Fourier Transform, Frequency response of discrete time systems, All
5 lectures
pass inverse and minimum phase systems.
Unit II DFT, Relationship of DFT to other transforms, FFT, DIT and DIF, FFT algorithm, Linear filtering
10 lectures
using DFT and FFT.
Unit III Frequency response of FIR filter types, Design of FIR Digital filters: Window method, Park-
McClellan’s method, Frequency Sampling Method; Design of IIR Digital Filters: Butterworth,
Chebyshev and Elliptic Approximations; Lowpass, Bandpass, Bandstop and High pass filters, 11 lectures
Mapping formulas, Frequency transformations.
102
Unit IV Direct form realization of FIR and IIR systems, Lattice structure for FIR and IIR systems, Finite- 6 lectures
word length effects. Limit cycle oscillations.
Unit V Multirate signal processing – Sampling rate conversion – applications of multirate signal 10 lectures
processing. Parametric and non-parametric spectral estimation. Application of DSP.
Recommended books :
1. Digital Signal Processing, Algorithms and Applications, Proakis and Manolakis, 3rd edition, Prentice Hall of
India, New Delhi.
2. Discrete-time Signal processing, Alan V Oppenheim and Ronald W Schafer, 3rd edition, Pearson.
3. The Scientist & Engineer’s Guide to Digital Signal Processing, Steven W Smith.
4. Understanding Digital Signal Processing, Richard G Lyons, Pearson.
5. Digital Signal Processing: A Practical approach, Emmanual C. Ifeachor et. Al., Pearson Education, 2nd edition.
Unit II Electrostatics. Coulomb’s law. Gauss’s law and applications. Electric potential. Poisson’s and
Laplace equations. Method of images. Multipole Expansion. Electrostatic fields in matter. 10 lectures
Dielectrics and dielectric polarization. Capacitors with dielectric substrates. Force and energy in
dielectric systems.
Unit III Magnetostatics: Biot-Savart’s Law, Ampere Circuits Law, Applications of Ampere’s Law,
Maxwell Equations of static fields, Magnetic Scalar and Vector Potentials, Magnetic Force- 10 lectures
charge particle, current elements, Magnetic field in Material space, Magnetization,
Magnetic Boundary Conditions, Inductor, Inductances, Magnetic Energy.
Unit IV Time-varying Fields : Faraday’s Law, Transformer and Motional Electromotive Forces, 8 lectures
Displacement current, Maxwell Equations, Time Varying Harmonic Fields.
Unit V Electromagnetic waves : General wave Equations, waves in lossy dielectrics, Plane wave in
8 lectures
lossless dielectrics, free space, good conductors, Wave polarization, Poynting vector and
reflection of waves
Recommended books :
1. Elements of Electromagnetics 4th Edition – M.N.O. Sadiku , Oxford.
2. Electromagnetic waves and radiating systems, 2th edition, E. Jordan and K. Balmin, Prentice Hall of India, New
Delhi, 2001
3. Advanced Engineering Electromagnetics, C.A. Balanis, John Willy and Sons, New York, 2001
4. Electromagnetics, 4th edition, J.D.Kraus, Tata McGrawhill, New Delhi,1991
103
Recommended books :
1. “CMOS VLSI Design”, Pearson Education, Neil H.E. Weste, David Harris, Ayan Banerjee , 3rd Edition.
2. “CMOS digital Integrated Circuits, Analysis and Design”,Sung-Mo Kang and Yusuf Leblebici, Tata McGraw-
Hill Publishing Company Limited, New Delhi.
3. “Basic VLSI Design”, Douglas.A.Pucknell, Kamaran Eshraghian, PHI,3rd Edition
4. “Introduction to VLSI Circuits & Systems”, John P. Uyemura Wiley India Edition,
EC-5201 Embedded System : 4 Credits (3-0-2)
Unit I Introduction to Real Time Embedded Systems: Embedded Systems Components, Memory,
Digital Signal Processors, General Purpose Processors, Embedded Processors and Memory- 10 lectures
Interfacing
Unit II Embedded Systems I/O: Interfacing bus, Protocols, Timers, Interrupts, DMA,USB and IrDA,
10 lectures
AD and DA Converters, Analog Interfacing
Unit III Design of Embedded Processors: Field Programmable Gate Arrays and Applications with
HDL, Embedded Communications: Serial, Parallel, Network, Wireless Communication 10 lectures
Unit IV Embedded System Software and Software Engineering issues: Introduction to Real-Time Systems,
Real-Time Task Scheduling, Concepts in Real-Time Operating Systems, Commercial Real-Time
12 lectures
Operating Systems, Introduction to Software Engineering, Requirements Analysis and
Specification, Modelling Timing Constraints, Software Design
Recommended books :
1. Real Time Systems, Rajib Mall, PHI, New Delhi
2. Embedded Systems Architecture - A Comprehensive Guide for Engineers and Programmers, Tammy Noergaard,
Newnes, Elsevier
3. An Embedded System Primer, Simon, PHI
4. Embedded Systems-Architecture, Programming and Design, Raj Kamal , TMH
5. “Embedded System Design: A Unified Hardware/Software Introduction”, Frank Vahid, Tony D. Givargis , Wiley
Publishers.
EC-5202 Microwave Engineering : 4 Credits (3-0-2)
Unit I Introduction: Microwave frequencies, systems and measurements. Electron motion in EM field,
9 lectures
review of Maxwell equations, waves and reflection of waves
Unit II Microwave Transmission lines-Transmission line Equations and Solutions, Reflection and
transmission Co-efficient, Standing waves and SWR, Line impedance and Admittance, Impedance 9 lectures
matching using Smith chart.
Unit III Microwave wave guides-Detailed study of Rectangular and Circular Wave guides. Microwave
components-rectangular, Circular and Semi Circular cavity resonators. Slow wave structures,
8lectures
Microwave hybrid Circuits, S parameters.Wave guide Tees, Directional Couplers, Circulators and
Isolators, Hybrid couplers.
Unit IV Microwave Sources-Klystrons, Reflex klystrons, TWTs, Klystron, Hybrid amplifier, BWO,
8 lectures
Microwave Switching tubes. Magnetrons, Forward wave cross-field amplifiers.
Unit V Microwave solid state devices-Transistors, Tunnel Diodes, Gunn LSA, InP. Avalanche transit
8 lectures
time devices-Real Diode, IMPATT, TRAPATT, and BARITT Diodes.
Recommended books :
1. Foundations of Microwave Engineering, 2 nd Ed, R. E. Collin, McGrawHill International, New York,2001.
2. Microwave Devices and Circuits,3rd Ed, Samuel Y. Lio, Prentice Hall of India, New Delhi,1995.
3. Micorwave Engineering 2nd Edition, David M. Pozar, Wiley
104
EC-5203 Analog Communication Theory : 4 Credits (3-1-0)
Unit I Signals and spectra: line spectra and Fourier series, Fourier transform and continuous
6 lectures
spectra. Properties of Fourier transform. Impulses in frequency and time.
Unit II Signal transmission and filtering: response of LTI systems, transfer functions, distortionless
transmission, linear distortion. Equalization. Nonlinear distortion and companding. Ideal filters,
6 lectures
real filters and quadrature filters. Hilbert transform. Correlation and spectral density -correlation
of power and energy signals, spectral density functions.
Unit III Probability and Random variables: principles, conditional probabilities and statistical
independence. Random variables and probability functions. Statistical averages. Probability
models: Binomial and Poisson distribution. Gaussian and Rayleigh PDF. Random processes: 7 lectures
principles, ensemble averages and correlation functions. Stationary and Ergodic process.
Unit IV Noise: types, sources, frequency domain representation of noise, spectral components of
6 lectures
noise, equivalent BW, additive white Gaussian noise and signal to noise ratio.
Unit V Linear CW modulation: bandpass systems and signals, AM, DSB signals and spectra. Tone
modulation and phasor analysis. Modulators and transmitters. SSB and VSB signals and their
spectra. Synchronous and envelope detection. Exponential CW modulation: FM and PM 10 lectures
signals, narrowband FM and PM. Tone, multitone and periodic modulation. Wideband FM,
direct and indirect FM, capture effect, detection.
Unit VI Noise in CW modulation: system models, predetection S/N, quadrature components. Linear
7 lectures
modulation with noise, synchronous and envelope detection, threshold effect.
Recommended books :
1. Modern Digital and Analog Communication Systems, Latest edition, B.P.Lathi, Oxford University Press, New Delhi.
2. An Introduction to Analog and Digital Communication, Symon Haykins, John Willy and Sons, New York
(Latest Edition)
3. Electronic Communication Systems, 4th edition, G.Kennedy and Bernard Davis, Tata McGrawhill, New Delhi.
105
EC-6100 Antenna and Radar Engineering : 5 Credits (3-1-2)
Unit I Antenna fundamentals-Antenna parameters, point source electric doublet, Instantaneous and
10 lectures
short dipoles, Quarter and Half wavelength Dipoles.
Unit II Antenna: linear array, planar array, Loop Antennas. Broadband Frequency independent antennas:
14 lectures
Spiral antennas, log periodic antennas. Aperture antennas, Horn antennas.
Unit III Microstrip antennas and its analysis. Antenna Measurements- antenna ranges, radiation patterns,
12 lectures
gain measurement, directivity measurement, polarization measurement
Unit IV Rader fundamentals, Range equation, Different types of radar with practical applications. 6 lectures
Unit V Antenna fundamentals-Antenna parameters, point source electric doublet, Instantaneous and 10 lectures
short dipoles, Quarter and Half wavelength Dipoles.
Recommended books :
1. Antenna theory: Analysis and design, C.A Balanis, John Wiley and Sons, New York,1982
2. Antennas, J.D.Kraus, McGraw hill International, New York, 1988
Recommended books :
1. Digital Communications, Simon Haykin John Wiley and Sons.
2. Digital Communications, Proakis , McGraw Hill.
106
EC-6120 Introduction to Digital Signal Processing : 4 Credits (3-0-2)
Unit I Introduction to basic elements of DSP systems, Advantages of Digital over Analog
SignalProcessing, multi-channel and multidimensional signals, continuous vs. discrete time and
discrete valued signals, concept of frequency in discrete time signals. A/D and D/A 10 lectures
conversions. Sampling theory, Aliasing, Quantization and coding.
Unit II Some elementary discrete time signals, Classification of discrete time signals. Block diagram
representation of discrete time systems. Analysis of discrete time, Linear time invariant systems-
convolution, properties of convolution, interconnection of LTI systems, Causality and stability, 10 lectures
systems with finite-duration and infinite –duration impulse responses. Recursive and non-
recursive systems, constant coefficient difference equations, structures for realization of LTI
systems..
Unit III Correlation of discrete time signals, Z-transform, poles and zeroes, pole location and time domain
8 lectures
behaviour for causal signals, properties of Z-transform.
Unit IV Discrete Fourier transform- Its properties and applications, efficient computation of DFT-fast
Fourier Transform algorithms, direct computation, divide-conquer approach, radix-2 FFT, Radix-4 8 lectures
FFT, divide in time and divide in frequency algorithms.
Unit V Design of digital filters- symmetric and anti-symmetric FIR filters, design of linear phase FIR filters
using windows, design of linear- phase filters by the frequency sampling method. Introduction to 6 lectures
linear prediction, power spectrum estimation and multi rate digital signal processing
Recommended books :
1. Digital Signal Processing, Algorithms and Applications, Proakis and Manolakis, 3rd edition, Prentice Hall of India,
New Delhi.
2. Discrete-time Signal processing, Alan V Oppenheim and Ronald W Schafer, 3rd edition, Pearson.
3. The Scientist & Engineer’s Guide to Digital Signal Processing, Steven W Smith.
4. Understanding Digital Signal Processing, Richard G Lyons, Pearson.
5. Digital Signal Processing: A Practical approach, Emmanual C. Ifeachor et. Al., Pearson Education, 2nd edition.
6. Digital Signal Processing, A Computer based Approach, 2 edition, S.K.Mitra, Tata McGraw Hill, New Delhi, 2001.
Recommended books :
1. Computer networks, 3rd Ed., A.S Tanenbaum , Prentice Hall of India, New Delhi. 2001.
2. Data communications, Computer Networks, and Open Systems, 4th Ed, Fred Halsall, Addison Wesely Longman ,
Singapore 1995.
3. Data and Computer communications, 5th Ed W.Stallings, Prentice Hall of India, New Delhi.2001.
4. Forouzen, “Data Communication and Networking”, TMH
107
Department of Mechanical Engineering
Programme: B.Tech. in Mechanical Engineering
Bridge Year [ For Lateral Entrants (10+3 Diploma) to Degree Module ]
BridgeYear : SemesterI
L T P C
HS 4301 Elements ofEconomics 3 0 0 3
PH 4301 ComprehensivePhysics 4 0 2 5
CY 4301 ComprehensiveChemistry 4 0 2 5
MA 4301 ComprehensiveMathematics-I 3 1 0 4
ME 4301 Strength of Materials &MachineTheory 3 1 0 4
ME 4302 Fluid Mechanics &Machines 3 1 0 4
20 3 4 25
BridgeYear : SemesterII
L T P C
HS 4401 Comprehensive CommunicationSkill 2 0 2 3
MA 4401 ComprehensiveMathematics-II 3 1 0 4
ME 4401 Mechanical Component Design &drawing 3 1 2 5
ME 4402 ThermalEngineering 4 0 0 4
ME 4403 ProductionTechnology 4 0 2 5
ME 4451 Comprehensive MechanicalLab 0 0 4 2
ME 4477* Computer Applications in MechanicalEngg.Engineering 1 0 4 3
*Audit Course 16 2 10 23
List of Electives
Group-1 (For Elective – I & Elective – II )
M E 6001 Combustion Engineering ME 6015 Boundary Layer Theory
M E 6003 Aerodynamics ME 6017 Air and Noise Pollution Control
M E 6005 Compressible Flow ME 6019 Heat Exchanger Design
M E 6007 Fluid Power Control Systems ME 6021 Design of Thermal Systems
M E 6009 Internal Combustion Engines ME 6023 Value Engineering
M E 6011 Finite Element Methods ME 6025 Mechanical Handling of Materials
M E 6013 Principles of Tribology ME 6027 Tool Design
ME 6029 Production Planning and Control
COURSE CONTENTS:
ME 4301: Strength of Materials & Machine Theory 4 Credits (4-0-0)
Unit I Introduction to strength of materials: Basic concepts and definition, elastic constants,
10 lectures
concept of direct, induced stresses, thermal stresses, stress, strain relationship, equilibrium
equation (2-D), strain, displacement relationship, biaxial tension and compression,
compound stress and strain, principal stresses and strains, strain rosette; Mohr’s circle
for stresses.
Unit II Torsion: Torsion of circular shaft, angle of twist, torque and power, springs (helical&leaf),
8 lectures
stresses in beam: shear force and bending moment diagrams, point of inflections, point of
contra flexure.
Unit III Bending stresses in beam, various beam section, shear stresses in beam, its variation over
8 lectures
different cross, section, introduction to deflection of beams, double integration method,
moment area method, Castigliano’s theorem.
Unit IV Theories of failure: Maximum principle stresses, maximum shear stress theory, Mohr’s
10 lectures
diagram, maximum strain theory, total strain energy theory, Octahedral shearing stress
theory.
Unit V Theories of column and strut: Eccentric loading of a short strut, long column, Euler’s
6 lectures
column formula, Secant’s formula, Empirical column formula.
Unit VI Kinematics and kinetics, mechanism and structure, degree of freedom and its determination,
8 lectures
lower and higher pairs, type of motions, links, joints, kinematic chains and their inversions,
Grashoff’slaw, miscellaneous mechanism, graphical methods of velocity analysis and
acceleration analysis.
109
Unit VII Brake and dynamometers: different types of brakes and dynamometers, working principles, 6 lectures
clutches: torque transmission through friction and centrifugal clutches.
Recommended Books :
1. Strength of Materials, W. Nash, Schaum Series, 6thEd., 2014.
2. Strength of Materials, S.Timoshenko, CBS, 3rdEd., 2004.
3. Mechanism & Machine Theory, G.S.Rao&R.V.Deukipat, New Angel International Publisher, 2008.
4. Theory of Machines, S.S.Rattan, Tata McGraw Hill, 3rd Ed.,2009.
Recommended Books:
1. Mechanics of fluids, V. Massey, Y. Nelson Thornes, Pearson, 2001.
2. Fluid Mechanics & Hydraulic Machines, R.K.Rajput, S.Chand Publishers, 1998.
3. Fluid Mechanics, J.F. Douglas, J.M. Gasiorek, J. A. Swaffield and L.B. Jack, Pearson Education, 2008.
4. Fluid Mechanics and Fluid Machines, S.K. Som and G. Biswas, 3rdEd., McGraw Hill Education, 2012
5. Fluid Mechanics and Thermodynamics of Turbomachinery, S. L. Dixon, 5thEd., Elsevier, 1998.
6. Fluid mechanics and hydraulics, J. Jagadishlal, 9thEd., Metropolitan New Delhi, 1991.
110
Recommended Books :
1. Design Data Book for Engineers, PSG College of Technology, Publisher KalaikathirAchchagam, Coimbatore, 2009.
2. Design of Machine Elements, M.F. Spotts, T.E. Shoup, L.E. Hornberger, S.R. Jayram, and C. V. Venkatesh, Person
Education, 8thed., 2006.
3. Design of Machine Elements, V. B. Bhandari, Tata Mcgraw Hill, 2nd Ed., 2007.
4. Fundamentals of Machine Component Design, R.C.Juvinall&K.M.Marshek, Wiley Student Edition, 3rdEd., 2007.
ME 4402: Thermal Engineering : 4 Credits (4-0-0)
Unit I Introduction, thermodynamic systems, surroundings, states, process and cycles,
microscopic and macroscopic view, properties, thermodynamic equilibrium, quasi-static 12 lectures
processes, continuum, Zeroth law of thermodynamics, heat and work, path function and
point function, work done for quasi-static processes, p-v diagrams, First law of
thermodynamics for closed system in a cycle, internal energy, non-flow processes and
their analysis, enthalpy, steady flow energy equation and its application to different flow
processes.
Unit II Second law of thermodynamics, limitations of first law of thermodynamics, concept of
heat engines and heat pump, classical statements of second law of thermodynamics and 12 lectures
their equivalence, reversible and irreversible processes, factors affecting reversibility of a
process, corollaries of second law of thermodynamics, reversible cycle and its efficiency,
thermodynamic temperature scale, Clausius inequality, entropy change during processes,
T -S diagrams, principle of entropy increase.
Unit III Gas laws, ideal gases, equation of state, Cpand Cvdefinition and relation, property relations,
p-v-t surface, properties of pure substance, use of properties table and charts of pure 9 lectures
substance.
Unit IV Air standard cycles, Otto cycle, Diesel cycle, dual cycle, Joule cycle, efficiency, mean
effective pressure, steam power cycles, Rankine cycle, modified Rankine cycle, efficiency, 14 lectures
combination of first and second laws: lost work, concept of availability and energy,
properties of mixture of ideal gases, analysis of thermodynamic cycles.
Unit V Thermodynamic relations, Maxwell’s relation, coefficient of expansion and 9 lectures
compressibility, energy relations for a simple systems, specific heat relations, Joule-
Thomson coefficient, relations of enthalpy and entropy.
Recommended Books :
1. Thermodynamics, Y.A. Cengel and M. A Boles, McGraw Hill Education, 2011.
2. Fundamentals of Engineering Thermodynamics, M. J. Moran and H N Shapiro, 3rdEd., John Wiley, 1995.
3. Fundamentals of Thermodynamics, R.E. Sonntag, C. Borgnakke and G. V. Van Wylen,6th Ed., Wiley, 2003.
4. Engineering Thermodynamics, P. K. Nag, Tata McGrawHill,2005.
5. Engineering Thermodynamics Work and Heat Transfer, G. F. C. Rogers and Y. R. Mayhew, 4thEd., Pearson, 2001.
ME 4403:Production Technology : 5 Credits (4-0-2)
Unit I Fundamentals of metal cutting, mechanism of chip formation, tool geometry, tool signature
in ORS, parameters effect tool life, calculation of cutting force and tool life, eneral purpose 12 lectures
machine tools and operation mechanisms lathe, milling, shaping, introduction to NC/CNC.
12lectures
Unit II Introduction to pattern making; Pattern materials and allowance, moulding, moulding
processes and core making, melting furnaces, fettling basic manufacturing processes and 11 lectures
casting defects. 11lectures
Unit III Plastic deformation of metals, deformation by slip and twinning, hot/warm forming, cold
forming, rolling, forging, drawing, stamping, shearing, coining, punching and extrusion;
Press work operations, coining, punch and dies. 11lectures 11 lectures
Unit IV Welding processes and applications, arc welding, TIG welding, MIG welding, friction
welding. 11lectures 11 lectures
Unit V Newer and advanced machining processes: USM, ECM, EDM,WEDM, I\introduction to
jig &fixtures, NC/ CNC lathe and part programing. 11lectures 11 lectures
Machine Shop: Turning and milling jobs. 14 hours
Welding shop: Design of weld model and fabrication of welding model 14 hours
111
Recommended Books :
1. Manufacturing Science – A.Ghosh and A.K. Mallik, East,West Press Pvt Limited, 2ndEd., 1993
2. Fundamentals of Metal Machining and Machine tools ,G.Boothroyd, Scripta Book Co., 3rdEd., 1988
3. Production Technology – HMTBangalore, Tata Mc,Graw Hills Publishing company limited New Delhi, 2008
4. Non-conventional Machining,P.K.Misra, Narosa Publishing House, 1997
5. Manufacturing Technology (Vol I & II), P.N. Rao,TataMc,Graw Hills Publishing company limited New Delhi,
2ndEd., 2004.
6. Principles of Metal Casting, B.Ravi, Prentice Hall of India Private Limited, 2005.
Recommended Books:
1. Object Oriented Programming with C++, E. Balagurusamy, TMH4th Ed.,2008.
2. Fortran 90/95 for Scientist and Engineers, S. J. Chapman, Tata McGraw Hill, 2013.
3. Getting Started with MATLAB, R. Pratap, Oxford University Press, 7th Ed., 2016
4. ANSYS Workbench Tutorial Release 13, K.Lawrence, SDC Publications, 2011
112
2. Engineering Optimization ,S.S.Rao, NewAge International (P) Limited, Publishers. 3rdEd., 2004.
3. Operations Research, H.A.Taha, Pearson Education India, 2008.
4. Introduction to Operations Research A Computer Oriented Algorithmic Approach, B.Gillet, Tata McGraw Hills,
New Delhi, 1983
Recommended Books :
1. Mechanics of fluids, B.S. Massey, Thornes, 2001.
2. Introduction To Fluid Mechanics, R.W. Fox, A.T. McDonald and P.J. Pritchard, John Wiley, 6thEd., 2004.
3. Fluid Mechanics, F. M. White, Tata McGraw,Hill, 6thEd., 2008.
4. Fluid Mechanics, J.F. Douglas, J.M. Gasiorek, J. A. Swaffield and L.B. Jack, Pearson Education, 2008.
5. Fluid Mechanics, Fundamentals and Applications, Y. A. Cengel and J.M. Cimbala, Tata McGraw,Hill, 2006.
6. Computational Fluid Dynamics, J. D. Anderson Jr., Tata McGraw,Hill International Edition, 1995.
113
Recommended Books :
1. Advanced Mechanics of Solids, L. S. Srinath, Tata McGraw,Hill, 3rdEd., 2008.
2. Theory Of Elasticity, , S. P. Timoshenko and J. N. Goodier, McGraw Hill International ,3rdEd., 1984.
3. Elasticity: Theory, Applications and Numerics, M. H. Sadd, Elsevier, 2ndEd., 2009.
4. Strength of Materials, S. P. Timoshenko, Vols. 1 and 2, CBS Publishers, 1986.
5. Introduction to Solid Mechanics, H. Shames and J. M. Pitarresi, Pearson, 3rd Ed., 1999.
6. An Introduction to The Mechanics of Solids, S. H. Crandall, N. C. Dahl and T. J. Lardner, Tata McGraw Hill, 2nd Ed.,
2008.
Recommended Books :
1 Theory of Machines, S. S. Rattan, Tata McGraw Hill, 3rdEd., 2009.
2 Mechanism and Machine Theory, J. S. Rao and R. V. Dukkipat, New Age, 2nd Ed., 2008.
3 Theory of Machines, T. Bevan, CBS Publishers and Distributors, 1984.
4 Design of Machinery–An introduction to Synthesis and Analysis of Mechanisms and Machines, R.L. Norton,
McGraw Hill International Editions, New York, 2ndEd., 2000.
5 Theory of Vibration with Applications, W. T. Thomson and M.D. Dahleh, Pearson Education, 5thEd., 1999.
114
Unit V Types of heat exchangers, overall heat transfer coefficient, LMTD method of heat exchanger 10 lectures
analysis for parallel flow, Condenser and Evaporators, Effectiveness-NTU method of heat
exchanger analysis. Effectiveness for parallel flow heat exchanger and counter flow heat
exchangers. Nucleate pool boiling, Flow boiling, Condensation of flat vertical surfaces.
Recommended Books :
1. Heat Transfer, J.P. Holman, Tata McGraw,Hill, 2011.
2. Fundamentals of Heat and Mass Transfer, F.P. Incropera and D. P. Dewitt, 5thEd. John Wiley and Sons, 2009.
3. Heat Transfer, S.P.Sukhatme, University Press, 2005.
4. Heat Transfer – A Basic Approach, M.N. Ozisik, TataMcGraw Hill, 1985.
5. Convective Heat Transfer, A. Bejan John Wiley and Sons, 3rd Ed., 2004.
6. Heat Transfer – A Practical Approach, Y.A.Cengel, Tata McGraw Hill, 2nd Ed., 2007.
Recommended Books :
1. Mechanical Engineering Design, J. E. Sheigley, McGraw Hill, 5thEd., 1988.
2. Design of Machine Elements, V. B. Bhandari, Tata Mcgraw Hill, 2ndEd. 2007.
3. Design of Machine Elements, M.F. Spotts, T.E Shoup, L.E. Hornberger, S.R. Jayram and C. V. Venkatesh, Person
Education , 8thEd., 2006.
4. Fundamentals of Machine Component Design, R. C. Juvinall and K. M Marshek, Wiley Student Edition, 5thEd.,
2007.
5. Design Data Book of Engineers, PSG College of Technology, Publisher K. Achchagam, Coimbataore, 2009.
115
Recommended Books :
1. Manufacturing Engineering & Technology, S. Kalpakjian and S.R. Schmid, Pearson, 7th Ed., 2014.
2. Manufacturing Science, A.Ghosh and A.K. Mallik, East-West Press Pvt Limited, 2nd Ed., 2010.
3. Manufacturing Technology (Vol. I )– P.N. Rao,TataMc-Graw Hills Publishing company limited New Delhi, 2nd Ed.,
2004.
4. Metal Cutting Theory and Practice ,A. Bhattacharya, New Canal Book Agency (P) Ltd. 2011.
5. Production Engineering –S. K. Singh, Made Easy Publication, 2013.
Recommended Books :
1. Industrial Engineering and Production Management, M. Mahajan, DhanpatRai& Co, 2005.
2. Problems and Solutions in Production and Operations Management, S.N. Chary, Tata McGraw Hills, 2012.
3. Industrial Engineering. & Management Science, T.R. Banga, N.K. Aggrawal and S.C. Sharma, Khanna Publishers,
1995.
4. Production and Operation Management- Joseph S. Martinich, Wiley India, 2008.
5. Motion and Time Study Design and Measurement of Work- Ralph M.Barnes, Wiley, 2009.
Recommended Books :
1. Modern Control Engineering, K. Ogata, Pearson Education Asia, 4th Ed. 2002.
2. Automatic Control Systems, B. C. Kuo and F. Golnaraghi, John Wiley, 8th Ed. 2002.
3. Modern Control Systems, R. C. Dorf and R. H. Bishop, Addison Wesley, 8th Ed.1998.
4. Modern Control System Theory, M. Gopal,New Age International, 2nd Ed., 1993.
ME 5206: Elements of Mechatronics : 3 Credits (3-0-0)
Unit I Introduction to mechanics: Types, open and closed loop system, microprocessor based
control, application of mechatronics system, CNC, Automatic camera, engine management 8 lectures
system, FMS.
Unit II Digital logic fundamentals, Logic gates, AND, OR, NOT, NOR, XOR, NAND gates,
combination gates, boolean representation, sequential logic, decoder, flip-flops and 8 lectures
registers.
Unit III Sensors and transducers, LVDT, encoder, velocity, acceleration sensors, proximity sensors,
photo-electric sensors, sensors in robotics. 8 lectures
Unit IV Actuators, electrical actuators, solenoids, relays, speed controls, stepper motor control,
mechanical actuators, hydraulic and pneumatic actuation systems, valves and its control, 8 lectures
mechanical elements, cam, gear & ratchet drive, re-circulated ball screw drives.
Unit V Application of microprocessor in mechanical engineering, programmable Logic controller
(PLC), system block diagrams, ladder diagram, basic components and their symbols, switch 10 lectures
controlling a solenoid, temperature control, cylinder sequencing, timers, delays, counters,
PLC programming.
Recommended Books :
1. Mechatronics Electronics Control Systems in Mechanical and Electrical Engineering – William
Bolton, Pearson Education, 2015.
2. Mechatronics - M.D. Singh, and J.G. Joshi, Prentice Hall of India Private Limited, 2006.
3. Mechatronics An integrated approach - Clarence. W. De Silva, CRC Press, 2004.
4. Programmable Logic Controller – FESTO Pneumatics, Bangalore (Report), 1991.
117
ME 5251: Experimental Techniques : 2 Credits (0-0-4)
Gas Dynamics Lab: Study of boundary layer development, study of flow past circular cylinder (pressure 14 lectures
distribution & drag components), flow characteristics over an aerofoil section, flow through convergent,
parallel/convergent, divergent nozzle, demonstration of Schlieren apparatus/3 components electronic
balance.
Heat & Mass Transfer Lab: Study of convective heat transfer, study of radiation heat transfer, fluidized 14 lectures
bed combustion, study of RAC systems, study of boiling heat transfer.
Computer Lab: Programming, compilation & running the program and analysis of results of simplex 14 lectures
algorithm/ network problems/simulation methods, comparison of results above with the standard
software available in the lab.
Kinematics & Dynamics lab: Study of Gyroscope, Study of reciprocating mass balancing, Study of cam 14 lectures
profile, Vibration study on universal vibration apparatus.
ME 5289: Seminar : 2 Credits (0-0-4)
Self introduction-students will introduce themselves in 3-4 minutes time each without any aid such as blackboard,
powerpoint presentation etc.
Students will prepare a report on any non technical/non scientific topic and present the same within 6-7 minutes each
Student will prepare and present a complete technical report on any interdisciplinary topic in 8-10 minutes time each.
Students will prepare a complete review report and present any topic related to Mechanical engineering in 12-15
minutes time each.
Group discussions, debates and brainstorming sessions, discourse on topics like entrepreneurship/ motivation/latest
world developments.
Recommended Books :
1. Principles of Energy Conversion, A. W. Culp, McGraw-Hill, 1991.
2. Energy Conversion (Vol. II &III), V. Kadambi and M. Prasad, New Age, 2011.
3. Power Plant Engineering, P.K. Nag, Tata McGraw-Hill, 2002.
4. Theory and Practice of Steam Turbines, W.J. Kearton, CBS Publishers & Distributers, 2004.
5. Power Plant Technology, M.M. Wakil, Tata McGraw-Hill,1985.
118
Unit II Introduction to Computer Numerical Control (CNC); Open and closed loop control; 10 lectures
Designation of axes, drives & actuation systems, feedback devices, CNC tooling, automatic
tool changers & work holding devices. DNC; Communication systems; PLC; LAN in
manufacturing.
Unit III CNC Programming: Manual part programming: PTP drilling, Milling and Turning; APT 12 lectures
Programming, Geometric and motion commands, Post processor commands; Programming
of components; Computer aided part programming.
Unit IV Introduction to group technology (GT); Part classification & coding: OPTIZ system; GT 7 lectures
cell formation; Introduction to Computer Aided Process Planning (CAPP); Variant and
Generative approaches, advantages of CAPP; CAD/CAM and CIM.
Unit V Introduction to FMS, AGVS, Automated material handling and storage systems; Induction 6 lectures
to robotics; shop floor control,
Recommended Books :
1. Computer Control of Manufacturing System - Y. Koren, Tata Mc-Graw Hills, New Delhi, 2006.
2. Introduction to Computer Numerical Control - James V. Valentino and Joseph Goldenberg, Prentice Hall, Englewood
Cliff, New Jersey, 5th Ed., 2012.
3. Introduction to Computer numerical control - Barry Leatham, PitamPublishers, 1986.
4. Numerical Control and Computer aided manufacturing - T.K. Kundra, P.N. Rao and N.K. Tiwari, Tata Mc-Graw Hills
Publishing company limited New Delhi, 2001.
5. Automation, Production system & Computer Integrated Manufacturing System -M.P.Groover, Pearson Eucation
Asia, 2008.
ME 6103: Power Plant Engineering : 4 Credits (4-0-0)
Unit I Steam power plant, major component of power plants, fuels, their storage, preparation,
handling, feeding, combustion and combustion control, ash handling and dust collection, 10 lectures
cooling towers, feed water treatment plants, insulation and power plant heat balance.
Unit II Nuclear power plants, principle of power generation by nuclear reaction, fuels for nuclear 8 lectures
power plants, preparation and care, components of nuclear reactor, types of nuclear reactor,
nuclear plants of India, recent advances in power plant .
Unit III Diesel and gas turbine power plants, applications, air supply and cleaning system, fuel 12 lectures
storage and supply systems, cooling system, lubrication and starting systems, comparative
study of diesel and gas turbine plants.
Unit IV Hydro-electric power plant, rain fall and run off measurements and plotting of various 8 lectures
curves for estimating power available with or without storage, different types;hydel power
plants.
Unit V Non-conventional power plant, design aspects of geothermal power plants, tidal power 10 lectures
plants, wind power plants, solar thermal and solar photovoltaic power plants, biomass
power plants.
Unit VI Site selection and economics of power plants, criterion of site selection of different types 8 lectures
of power plants, cost consideration of different types of power plants, cost consideration
for selection of different equipment, comparison of total cost of different types of power
plants, tariff of power, load production methods to meet variable loads.
Recommended Books :
1. Power Plant Technology, M.M. Wakil, Tata McGraw-Hill, 1985.
2. Power Plant Engineering, P. K. Nag, Tata McGraw-Hill, 2002.
3. Power Plant Engineering, R.K. Rajput, Laxmi Publishers, 4th Ed., 2007.
4. Power Plant Engineering, V. Black and B. Veatch, CBS Publishers & Distributers Pvt. Ltd., 1st Ed., 2005.
5. Power Plant Engineering, F.T. Morse, East-West Press, New Delhi, 1953.
119
Unit II Product design methods, creative & rational, objective trees method, function analysis 12 lectures
method,QFD method, generating alternatives, morphological chart method, evaluating
alternatives, weighted objectives method, AHP analysis, improvement, value analysis
and design strategies.
Unit III Design for manufacture, design for assembly & disassembly, preparation of manufacturing 8 lectures
drawing and processed places.
Practice An engineering product is to be conceptualized, modeled, designed, fabricated, 28 hours
demonstrated and presented in small groups of four to five students in practice sessions.
Recommended Books :
1. Product Development, A.K. Chitale and R.C. Gupta, Tata McGraw Hills, New Delhi, 1979.
2. Engineering by Design, G.Voland, Pearson, 2003.
Recommended Books
1. Computational Fluid Dynamics, J. D. Anderson Jr., Tata McGraw-Hill International, 1995.
2. Computational Fluid Mechanics & Heat Transfer, D.A. Anderson, J.C. Tannehill and R.H. Pletcher, Taylor &
Francis, 2nd Ed., 1997.
3. Introduction to Computational Fluid Dynamics, Anil W. Date, Cambridge University Press, 2005
4. Computational Techniques for Fluid Dynamics Vol. 1 and 2, C. A. J. Fletcher, Springer, 1991.
5. Computational Fluid Dynamics, T. J. Chung Cambridge University Press, 2010.
6. Computational Methods for Fluid Dynamics, J. H. Fergiger and M. Peric Springer, 2002.
7. Numerical Heat Transfer and Fluid Flow Hemisphere, S.V. Patankar, Taylor & Francis, 1980.
ME 6003:Aerodynamics : 3 Credits (3-0-0)
Unit I Introduction, governing equations, potential flows, Kutta-Joukowski’stheorem, flow over
7 lectures
arbitrary bodies, incompressible flow over aerofoils, aerofoil nomenclature and
characteristics, thin aerofoil theorem- Kuttacondition, Kelvin’s circulation theorem.
Unit II Vortex panel model, effect of camber and thickness, estimation of aerodynamic forces and
moments from pressure distribution. 7 lectures
Unit III Incompressible flow over finite wings, down wash and induced drag, Biot-Savart law and 7 lectures
Helmholtz’s vortex theorem.
Unit IV Prandtle’s classical lifting line model, lifting surface theory. 7 lectures
Unit V Numerical vortex lattice method, compressible flow over aerofoils, wave patterns- oblique 7 lectures
shock, expansion waves.
Unit VI Trailing edge boundary condition prandtle-gluert’s theory, supersonics aerofoils, Ackert’s
theorem, wave drag, area rule, conical flow, axisymmetric flow, introduction to stability 7 lectures
control of aircraft.
Recommended Books:
1. Fundamentals of Aerodynamics, J.D.Anderson, Tata McGraw Hill, 2010.
2. Aerodynamics for Engineers - J.J.Bertin and M.L.Smith,Tata McGraw Hill, 2003.
3. Introduction to Flight - J.D.Anderson, Tata McGraw Hill, 2010.
4. Aerodynamics Theory - W.F.Durrand, PHI, 2000.
121
Recommended Books:
1. Theory and practice of Steam turbines, W.J. Kearton, CBS Publishers &Distributers, 2004.
2. Gas Turbine Theory, Cohen, Rogers and Saravanmutto, Pearson, 5th Ed., 2008.
3. Aerothermodynamics of Gas Turbine and Rocket Propulsion, G.C.Oates, AIAA Education Series, 3rd Ed., 1997.
4. I C Engine Fundamentals, J.B. Heywood, Tata McGraw Hill, 1988.
ME 6005: Compressible Flow : 3 Credits (3-0-0)
Unit I Review of fluid dynamics and thermodynamics principles and concepts, generalised energy
6 lectures
equation, energy equation for compressible flow, compressibility correction factor,
stagnation and critical state parameters.
Unit II Isentropic flow with variable area, subsonic, supersonic nozzle &diffuser. Nozzle operation,
7 lectures
nozzle choking, overexpansion & under expansion.
Unit III Normal shock analysis, hugoniot equation, oblique shock-tangential velocity superposition
10 lectures
on normal shock, oblique shock analysis, shock strength, weak & strong shocks, attached
& detached shocks, pressure and entropy changes across a mach wave.
Unit IV Isentropic turn of supersonic flow, Prandtlmeyer flow, expansion fans and compression
7 lectures
waves
Unit V Effects of friction on compressible flow (Fanno flow), effect of heat transfer (Rayleigh
8 lectures
flow), flow choking. combined effect of friction and heat transfer, compressible flow
measurement, supersonic wind tunnels.
Unit VI Flight speed measurement, optical techniques–schlieren technique and interferometer,
4 lectures
computational methods in compressible flow.
Recommended Books:
1. Fundamentals of Gas Dynamics, R.D. Zucker, John & Wiley, 2002.
2. Gas Dynamics, E.Rathakrishnan, PHI, 2012.
3. The Dynamics and Thermodynamics of Compressible Flow, A. Shapiro, The Ronald Press Co., 1954.
4. Gas dynamics (Vol. I & II), J. Zuckrow and J. Hoffman, Wiley International, 1976.
5. Modern Compressible Flow, J. D. Anderson, Tata McGraw Hill, 1989.
ME 6006: Two Phase Flow and Heat Transfer : 3 Credits (3-0-0)
Unit I Definitions, properties of mixtures, review of one-dimension conservation equations in 7 lectures
single phase flows, governing equations for homogeneous, separated and drift- flux models.
Unit II Flow pattern maps for horizontal and vertical system, material handling, solid-liquid and 7 lectures
solid-gas system, particle distribution, pressure variation.
Unit III Simplified treatment of stratified, bubbly, slug and annular flows. 7 lectures
Unit IV Thermodynamics of boiling, pool boiling –onset of nucleation, heat transfer coefficient, 7 lectures
critical heat flux, effect of sub- cooling, flow boiling-onset of nucleation, heat transfer
coefficients.
Unit V Condensation-film and drop wise condensation. 7 lectures
Unit VI Fluidized bed heat transfer. 7 lectures
Recommended Books
1. One-Dimensional Two-Phase Flow, G.B. Wallis, Tata McGraw-Hill, 1969.
2. Convective Boiling and Condensation, J.G. Collier and J.R. Thome, Oxford University Press, 3rd Ed., 1996.
3. Heat transfer, J.P. Holman, Tata McGraw-Hill, 2011.
4. Two-Phase Flow, Theory and Applications, C. Kleinstreuer, Taylor & Francis, 2003.
5. Boiling, Condensation and Gas-Liquid Flow, P B Whalley, Oxford University Press, 1987.
6. Boiling Heat Transfer and Two-Phase Flow, L.S. Tong and Y.S. Tang, Taylor and Francis, 2nd Ed., 1997.
7. Thermo-Fluid Dynamics of Two-Phase Flow, M. Ishii and T. Hibiki, Springer, 2006.
ME 6007: Fluid Power Control Systems : 3 Credits (3-0-0)
Unit I Introduction to fluid Power, hydraulics vs. pneumatics, properties of fluid, energy and 8 lectures
power in hydraulic systems, distribution system, source of hydraulic power, positive
displacement pumps, types, classifications, construction and operation of gear, vane
(constant, variable delivery and pressure compensated and piston pumps (in-line and
radial type), efficiency calculation, pump selection, pump performance.
122
Unit II Fluid power actuators: Linear, single acting, double acting and telescopic, cylinder force, 6 lectures
velocity and power, cylinder cushioning devices, cylinder mountings. Rotary or hydraulic
motors, types – gear, vane and piston types, torque, power, flow rate and efficiencies,
hydrostatic transmissions.
Unit III Control components in hydraulic system, flow control valves, needle, pressure and 7 lectures
temperature compensated valves, pressure control valves, relief – direct, compound &
pilot operated, pressure - reducing, sequence valve, direction control valve, 3/2,4/2,4/3.5/
2 check valve, center flow path configuration of 3 position d.c. valves, open centre, close
centre, tandem centre, cartridge valves, manually operated - solenoid operated valves,
servo valves, proportional control valves.
Unit IV Symbols for hydraulic and pneumatic circuits, hydraulic circuit design and analysis, speed 7 lectures
control circuits such as meter-in, meter-out, bleed-off, and regenerative circuits, unloading
circuit, counter balance circuit, cylinder synchronization, accumulator circuits, and fail
safe circuits, trouble shooting of hydraulic circuits.
Unit V Pneumatic– air preparation and components, Basic pneumatic circuits – single & double 7 lectures
acting, air pilot control, two step speed, two hand safety circuits, Cascade design of
pneumatic circuits.
Unit VI Electric control of fluid power circuits, electrical components, electrical ladder diagram.
7 lectures
Application of pneumatics in low cost automation, dual cylinder circuits, regenerative
circuit, box-sorting system, programmable logic controllers (PLCs), PLC control of hydraulic/
pneumatic cylinder and its ladder diagram, fluid power maintenance and safety, experiments
on hydraulic and pneumatic circuits.
Recommended Books:
1. Fluid Power with Applications, A. Esposito, Pearson Education, 5th Ed., 2003.
2. Industrial Hydraulics, J.J. Pipenger, Tata McGraw Hill, 2000.
3. Oil Hydraulics (Principles and Maintenance, S.R.Majumdhar, Tata McGraw Hill, 2002.
4. Hydraulic and Pneumatic Power & Control, Y. Frankline, Tata McGraw Hill, 1966.
5. Pneumatic system, Principles and Maintenance, S.R.Majumdar, Tata McGraw Hill, 1996.
6. Fluid power system, A.B. Goodwin, Palgrave Macmillan, 1976.
7. Manual on Pneumatic Principle and its applications. Festo’s, (Report), 2005.
ME 6008: Composite Materials : 3 Credits (3-0-0)
Unit I Introduction, materials, fiber reinforcement, matrix materials. 7 lectures
Unit II Manufacturing processes, hand lay-up, prepeglay-up, bag molding, autoclave processing, 7 lectures
compression molding, resin transfer molding, pultrusion, filamentwinding.
Unit III Micro-mechanics: Strength of materials approach, continuum approach, Ply mechanics, 7 lectures
co-ordinate systems, off-axis stiffness.
Unit IV Macro-mechanics: Description of laminates, laminate moduli, computation of stresses in 7 lectures
laminates.
Unit V Types of joints, Mechanics of joints, Damages in joints. 7 lectures
Unit VI Failure criteria, Strength of materials approaches, Fracture mechanics approach. 7 lectures
Recommended Books
1. Mechanics of Composite Materials, R. M. Jones, Taylor and Francis, 1999.
2. Mechanics of Composite Materials, S. W. Tsai and H.T. Hahn, Technomic Publishing Company, 1980.
3. Mechanics of Composite Materials, A.K. Kaw, CRC Press, 2006.
4. Introduction of Composites Materials and Fibres, K. Zyong, CRC press, 2000.
ME 6009: Internal Combustion Engines : 3 Credits (3-0-0)
Unit I Review of basics of IC Engines, basic components and nomenclature, classification of IC 4 lectures
engines, SI and CI engine, 2- stroke and 4-stroke engine, Engine performance parameters
such as various efficiencies, average piston speed, specific fuel consumptions.
Unit II Fuel-air cycle and their analysis, significance of cycle, comparison with air standard cycle, 9 lectures
basis of cycle analysis, variable specific heat, Actual cycles and their analysis, time loss
factor, heat loss factor, exhaust blow down, Fuels, classification, properties, characteristics
and rating, Alternate fuels.
Unit III Air and fuel induction, Carburetion – factors affecting carburetion, air-fuel mixture and 8 lectures
requirements at different load and speeds, principle of carburetion, and essential parts of
123
carburetor, calculation of air-fuel ratio, compensating devices, types of carburetor. Injection
systems – functional requirement, classification, components of injection system,
electronic injection systems.
Unit IV Fluid motions in combustion chamber, turbulence, swirl, tumble, squish, cerevic flow,
blow,combustion in SI Engine, stages of combustion, factors influencing flame speed, rate 9 lectures
of pressure rise, abnormal combustion pre ignition, detonation, factors causing abnormal
combustion, combustion chamber for SI Engines Combustion in CI Engine, stages of
combustion, factors influencing delay period, knocking in CI engine, factors causing
abnormal combustion, combustion chamber for CI Engines, comparison of knock in SI and
CI engine.
Unit V Engine heat transfer, variation of gas temperature, piston and cylinder temperature
distribution, heat transfer, parameters affecting engine heat transfer, need for cooling 6 lectures
systems, types of cooling system, fundamentals of engine friction and lubrication.
Unit VI Engine operating characteristics, heat balance, supercharged and turbo charged engine,
Engine emission and their control. 6 lectures
Recommended Books:
1. Internal combustion Engines, P.W. Gill and J. H. Smith and E.J. Ziurys, Oxford & IBH, 1959.
2. Internal Combustion Engines, V. Ganesan, Tata McGraw Hill, 2007.
3. Internal Combustion Engines, C. R. Fergusan and A. T. Kirkpatrick, John Wiley & Sons, 2001.
4. I.C. Engine Fundamentals, J.B. Heywood, Tata McGraw Hill, 1988.
5. Engineering Fundamentals of the Internal Combustion Engine, W. W. Pulkrabek, PHI, 2002.
ME 6010: Turbo Machines : 3 Credits (3-0-0)
Unit I Introduction, dimensional analysis & similitude as applied to turbo machines, performance 6 lectures
laws, incompressible flow analysis, performance characteristics, variable geometry turbo
machines (axial, radial & mixed flow machines), specific speed & cavitation, compressible
gas flow relations and compressible fluid analysis, inherent unsteadiness of flow within
turbo machines.
Unit II Two dimensional cascades, cascade nomenclature & geometry, analysis of cascade forces, 6 lectures
energy losses, lift & drag, circulation and lift, efficiency of compressor cascades,
performance of two-dimensional cascades, cascade wind tunnel & instrumentation, cascade
test results, compress or cascade correlations, turbine cascade correlation, comparison of
profile loss in a cascade and in a turbine stage, optimum space-chord ratio.
Unit III Axial flow turbines, two dimensional theories, velocity diagrams, stage losses and efficiency, 8 lectures
stage reaction, diffusion within blade rows, design point efficiency, maximum total to
static efficiency of a reversible turbine stage.
Unit IV Axial flow compressors and fans, 2-D analysis, velocity diagram & thermodynamics of 8 lectures
compressor stage, stage losses &efficiency, reaction ratio & stage loading, off-design
performance, stage pressure rise, pressure ratio in a multistage compressor, estimation of
compressor stage efficiency, Axial flow ducted fans, Blade element theory.
Unit V Radial Turbines, Steam turbines, Losses & efficiencies, work & power calculations, velocity
triangles & thermal design, Radial flow Gas turbines, Types of inward flow 7 lectures
radial turbines, thermodynamics of IFR turbines, rotor design, nominal design point
efficiency, loss coefficients, incidence losses, clearance &windage losses, significance &
application of specific speed
Unit VI Centrifugal pumps, fans & compressors, theoretical analysis, inlet casing and impeller,
conservation of enthalpy, diffuser, limitation of inlet velocity, optimum design of pump & 7 lectures
compressor inlet, slip factor, performance characteristics, choking in a compressor stage.
Recommended Books :
1. Fluid Mechanics and Thermodynamics of Turbo machines, S.L. Dixon, Butterworth-Heinemann, 5th Ed., 2005.
2. Pumps, Fans and Compressors, V. Cherkassky, Mir Publishers, 1990.
3. Turbines, Fans and Compressors, S.M. Yahya, Tata McGraw Hill, 1987.
4. Theory and Practice of Steam turbines, W.J. Kearton, CBS Publishers & Distributers Pvt. Ltd., 2004.
5. Steam and Gas turbines and Power Plant Engineering, R. Yadav, Central Publishing House, 7th Ed., 2011.
6. Gas Turbines, V. Ganesan, Tata McGraw Hill, New Delhi, 3rd Ed., 2010.
7. Gas turbine theory, G. Cohen, R. Rogers and S. Saravanmutto, Pearson, 5th Ed., 2008.
124
ME 6011: Finite Element Methods : 3 Credits (3-0-0)
Unit I Introduction: historical background, basic concept of the finite element method, comparison 10 lectures
with finite difference method, direct FEM formulations. variational methods: calculus of
variation, the Rayleigh-Ritz and Galerkin methods. 10 lectures
Unit II Finite element analysis of 1-D problems: formulation by different approaches (direct, 8 lectures
potential energy and Galerkin), derivation of elemental equations and their assembly,
solution and its post-processing.
Unit III FEM application: Heat transfer and solid mechanics problems (rod, beam, truss and frame), 8 lectures
eigen value and time dependent problems, discussion about preprocessors, postprocessors
and finite element packages.
Unit IV Finite element analysis of 2-D problems: finite element modeling of single variable problems, 6 lectures
triangular and rectangular elements, applications in heat transfer, and solid mechanics
6 lectures
Unit V Numerical considerations: numerical integration, error analysis, mesh refinement. plane 10 lectures
stress, plane strain problems and bending of plates.
Recommended Books
1. Finite Element Methods for Engineers, U. S. Dixit, Cengage Learning India Pvt Ltd, 1st Ed., 2009.
2. An introduction to the Finite Element Method, J. N. Reddy, McGraw-Hill, New York, 3rd Ed., 2005.
3. Concepts and Applications of Finite Element Analysis, R. D. Cook, D. S. Malkus and M. E. Plesha, John Wiley,
New York, 3rd Ed., 1989.
4. Finite Element Procedures in Engineering Analysis, K. J. Bathe, Prentice-Hall, Englewood Cliffs, NJ, 1st Ed., 1996.
5. The Finite Element Method, O. C. Zienkiewicz and R L Taylor, McGraw-Hill, 3rd Ed., 1989.
ME 6012: Non-Conventional Energy : 3 Credits(3-0-0)
Unit I Energy sources, classification, importance of non-conventional energy sources,
advantages and disadvantages of non-conventional energy sources, environmental aspect 7 lectures
of energy, energy storage, necessity of energy storage, energy storage methods.
Unit II Solar radiation: extraterrestrial radiations and terrestrial radiations, solar radiation geometry,
solar time, solar day length, solar radiation measurement on horizontal and inclined surfaces, 7 lectures
solar thermal systems, solar collectors, classification, performance indices. Liquid flat
plate collector &their components, efficiency, solar thermal system applications,
photovoltaic devices.
Unit III Wind energy: Origin of wind, factor affecting the distribution of wind on the surface of
earth, nature of wind, wind turbines, components of wind turbine, wind energy conversion 7 lectures
systems, types of wind machines: horizontal and vertical axis wind rotors performance.
Unit IV Design and evaluation of wind mills, Wind regime analysis.es 7 lectures
Unit V Bio-mass: Introduction, photosynthesis process, bio fuels, biomass resources, recycling 7 lectures
of agricultural wastes, Biomass conversion technologies, types, digester, urban waste to
energy conversion, biomass gasification.
Unit VI MHD, thermoelectric, thermionic, thermo nuclear fusion technology, hydroelectric (mini 7 lectures
and macro hydropower).
Reommended Books :
1. Power Plant Engineering, Black and Veatch, CBS Publishers & Distributers Pvt. Ltd., 1st Ed., 2005.
2. Non- conventional energy source, G.D. Rai, Khanna Publishers, 2011.
3. Energy models: 2000 and Beyond, J. Parikh, Tata McGraw Hill, 1997.
4. Towards clean energy, B. Ghosh, S.K. Saha and S. Basu, Tata McGraw Hill, 1998.
5. Principles of solar engineering, Kreith and Kreider, Hemisphere, 1978.
ME 6013: Principles of Tribology : 3 Credits (3-0-0)
Unit I Modes of friction, dry friction. 7 lectures
Unit II Boundary lubrication, hydrodynamics and hydrostatic lubrication, elastic hydrodynamics, 7 lectures
lubrication, design characteristics of slider bearings.
Unit III Operating characteristics of slider bearings. 7 lectures
Unit IV Wears types and characteristics. 7 lectures
Unit V Selection of rolling element bearing and their operating parameters. 7 lectures
Unit VI Industrial lubricants: oils, grease, solids and special lubricants, bearing failures, bearing 7 lectures
maintenance, diagnostic,maintenance of tribology,components.
125
Recomended Books :
1. Intoduction to Tribology, B.C. Majumdar, Wheeler Publishing, 2000.
2. Introduction of Tribology for Bearing, B. C.Majumder, S. Chand & Company, 2nd Ed., 2008.
3. Introduction to Tribology, Cameron., Longman, London, 1970
Recommended Books:
1. Theory of Elasticity, S.P. Timoshenko and J.N.Goodier, McGraw-Hill, 3rd Ed., 1970.
2. Mathematical Theory of Elasticity, S. Sokolnikoff, McGraw-Hill, 2nd Ed., 1957.
3. Foundation of Solid Mechanics, Y. C. Fung, Prentice Hall, 1965.
4. Applied Elasticity, X. Zhilun, Willey Eastern Ltd., 1992.
Unit IV Laminar boundary layer, boundary layer equation for 2 –D incompressible flow, separation
& control of boundary layer, momentum integral equation for boundary layer, some exact 9 lectures
solutions, steady state boundary layer equation, flow past a wedge, flow in a convergent
channel, flow past a cylinder.
Unit V Approximate methods, approximate solution for flow over flat plate at zero incidence, 10 lectures
flow past a circular cylinder, fundamentals of turbulent boundary layer, Reynolds equation,
Prandtl’s mixing length.
Unit VI Introduction to thermal boundary layer, heat conduction equation from boundary layer 5 lectures
equation, general properties of thermal boundary layers, forced and natural flows,
adiabatic walls.
Recommended Books:
1. Viscous Fluid Flow, F.M. White, McGraw-Hill, 1991.
2. Mechanics of Fluid, W. J. Duncan, A. Thom and A. Young, Arnold Publications, 1970.
3. Mechanics of Fluids, B. Massey and J.W. Smith, Nelson Thornes Publications, 2001.
4. Boundary Layer Theory, H. Schlichting and K. Gersten , Springer-Verlag, 2000.
126
ME 6016: Management of Production System : 3 Credits (3-0-0)
Unit I Job, Batch, Mass, cellular production systems, automation in production systems, MLT and its
7 lectures
mathematical models, material handling.
Unit II AGVS,TTW, productivity engineering, and methods of improvement, cost analysis,
7 lectures
marketing and sales, inventory, production planning and control.
Unit III Automated layout and flow analysis, systems concepts in production systems CAD,
7 lectures
CAM &CIM.
Unit IV Shopfloor management techniques, Job card design, work centers, work study, time study
7 lectures
applications.
Unit V Quality circles, productivity quality teams, work force planning. 7 lectures
Unit VI TQM, ISO 9000, Future factories and MAP, group technology and FMS. 7 lectures
Recommended Books :
1. Production and Operations Management, S.N. Chary,Tata Mc-Graw Hills Publishing company limited New Delhi, 2012.
2. Modern Production and Management, E.S.Buffa, Wiley EasternLtd, 1989.
3. Production Planning and Control, S.K Mukhopadhyay, 2ndEd., PHI, 2010.
4. Industrial Engineering and Production Management, Martin and Telseng, S Chand &Co, 2006.
Recommended Books :
1. Advanced Machining Processes, V. K. Jain, Allied Publishers, 2009.
2. Modern Machining processes, P. C. Pandey, TataMcGraw,Hill Education, 2013.
3. A New Technology, A. Bhattacharya, The Institution of Engineers, India 1984.
4. Nonconventional Machining, P K Mishra, Narosa Publishing House, 1997
127
ME6019: Heat Exchanger Design : 3 Credits (3-0-0)
Unit I Introduction to heat exchanger, types and constructional details, baffles design criteria, 7 lectures
selection of material and type for typical application, use of hand book, and tables, charts.
Unit II Design of various types of exchangers such as double pipe counter flow exchanger, 7 lectures
double pipe series, parallel exchangers.
Unit III Tubular exchangers, tubular gas after cooler, tubular gas inter cooler, atmospheric cooler, 7 lectures
electric resistance heater.
Unit IV Condenser; Horizontal and vertical, surface condenser. 7 lectures
Unit V Evaporators: Raw water evaporators, power plant, make up evaporator, saltwater distiller, 7 lectures
thermo compression cane sugar evaporator.
Unit VI Vaporizing exchanger, kettle reboiler, thermo syphon reboiler, extended surfaces, fix heat 7 lectures
exchanger, direct contact transfer equipment.
Recommended Books:
1. Process Heat Transfer, D.Q. Kern, McGraw Hill, 1950.
2. Extended Surface Heat Transfer, D.Q. Kern, McGraw Hill, 1972.
3. Fundamentals of Heat Exchanger Design, R. K. Shah and D P Sekulic, John Wiley & Sons, 2003.
4. Heat Transfer: A Practical Approach, Y.A. Cengel, McGraw Hill, 2002.
5. Process Heat Transfer, G. F. Hewitt, G L Shires and T R Bott, CRC Press, 1994.
6. Process Heat Transfer, Sarit K. Das, Narosa Publishing House, 2005.
ME 6020: Energy Management : 3 Credits (3-0-0)
Unit I Energy conversion principles. 7 lectures
Unit II Solar energy: Sources, reserves and technologies, photovoltaic devices, design of solar 7 lectures
energy operated systems.
Unit III Energy management and planning. 7 lectures
Unit IV Energy audit. 7 lectures
Unit V Production and consumption. 7 lectures
Unit VI Conventional and non-conventional energy applications: case studies. 7 lectures
Recommended Books:
1. Energy Management, P. O’Callaghan, McGraw Hill Professional, 1993.
2. Industrial Energy Management, V. Kaiser, Technip Publications, 1993.
3. Principles of Energy Conversion, 2nd Edition, A. W. Culp, McGraw Hill, 2nd Ed., 1991.
4. Hand book of Industrial Energy Conservation, S. Davidttu, McGraw Hill, 1982.
Recommended Books:
1. Theory of Vibration with Applications, W. T. Thomson, Prentice Hall, 4th Ed., 1993.
2. Principles & Techniques of Vibrations, L. Meirovitch, Prentice Hall International (PHI), 1997.
3. Mechanical Vibrations, F. S. Tse, I. E. Morse and R. T. Hinkle, CBS Publ., 1983.
4. Mechanical Vibration, R.V. Dukkipati, and J. Srinivas, PHI, 2nd Ed., 2012.
5. Theory and Practice of Mechanical Vibrations, J. S. Rao and K. Gupta, New Age Publication, 2nd Ed., 1995.
129
Recomended Books:
1. Material Handling Systems and Terminology, Edward Frazelle, LionheartPub, 1991.
2. Manufacturing Facilities Design and Material Handling, Meyers, Stephens, Prentice Hall, 1999.
3. Plant Layout and Material Handling, Fred E. Meyers, Prentice Hall, 2000.
ME 6026: Metal Casting Technology : 3 Credits (3-0-0)
Unit I Foundry Industry in India, Asia and world, role of WFC, AFC and IFC. 7 lectures
Unit II CAD/CAM in pattern design and manufacture. 7 lectures
Unit III Near net shape casting processes, squeeze casting, centrifugal casting, die casting, fused 7 lectures
diffusion methods, high pressure moulding processes, resin binders.
Unit IV Foundry mechanization and automation, computer charging systems for cupola, arc and 7 lectures
induction furnaces, automatic pouring systems.
Unit V Solidification simulation, computer aided gating and riser design and methods, ISO 9000 / 7 lectures
IS 14000 systems in foundry.
Unit VI Energy conservation in foundry, manufacturability of castings, GT and FMS application 7 lectures
in foundry, PLCs and loaded chains in foundry, productivity foundry, production
economics, industrial robotics.
Recomended Books :
1. Metal Casting Principles and Practice,T.V.RamaRao,New Age International, 2007.
2. Foundry Engineering, ,H.F.Taylor, M.C.Fleemings, J.Walff, Wiley EasternLtd, 1993.
3. Principles of Metal Casting ,Heina, Loper, Rosenthal,TataMc,Graw Hills Publishing company limited, 1989.
4. Principles of Metal Casting, B.Ravi, Prentice Hall of India, 2005.
ME 6027: Tool Design : 3 Credits (3-0-0)
Unit I Tools, their functions in the manufacturing process. General considerations in their design. 7 lectures
Unit II Jigs and fixtures. Design of locating, clamping,guiding element and their integration. 7 lectures
Unit III Sheet metal working tools, tools for blanking, bending and drawing operation. 7 lectures
Unit IV Forging,casting die, design, dies for other processes. 7 lectures
Unit V Gauges and inspection of fixtures. 7 lectures
Unit VI Tool layout and cam design for automats; Introduction to Auto CAD, ProEngineer 7 lectures
Texts/ References:
1. Fundamentals of Tool Design, F.W.Wilson, and A. R. Konecny Literary Licensing, LLC, 2012.
2. Tool Design, C.B.Cole, Ameerican Technical Society, 1954.
3. Tool Design, C. Donaldson, G.H.Lecain and V.C.Goold, TataMcGawHill, , 4th Ed., 2012.
ME 6028: Industrial Robotics : 3 Credits (3-0-0)
Unit I Introduction to robotics, classification of robots and manipulators, industrial application 7 lectures
of robots.
Unit II Design criteria for end effectors. 7 lectures
Unit III Kinematics and dynamics of linkage with special emphasis to the open loop controls. 7 lectures
Unit IV Actuators and drive elements, robot sensors and vision. 7 lectures
Unit V Control of robots and manipulators, robot programming. 7 lectures
Unit VI Problems related to design of grippers and robot models. 7 lectures
Recomended Books :
1. Robotics and Control, R. K. Mittal and I. J. Nagrath, McGrawHill, 2003.
2. Robotics: Control, Sensing, Vision and Intelligence, K. S. Fu, R. C. Gonzalez and C.S.G. Lee, McGrawHill, 2008.
3. Introduction to Robotics, J. J. Craig, Addision,Wesley, 2005.
4. Introduction to Robotics: Analysis, Control, Applications, S. B. Niku ,Wiley Publication,2nd Ed., 2010.
5. Robotics for Engineers, Y. Koren, McGraw Hill,1985.
6. Robot Vision, B. K. P. Horn, MIT Press, Cambridge,1986.
131
ME 6121: Theory of Refrigeration and Air Conditioning : 2 Credits (2-0-0) For AE Students]
Unit I Introduction: concept of heat engine, heat pump and refrigeration, efficiency and COP,
Ideal refrigeration cycle, Reversed Carnot cycle, Unit of refrigeration, refrigeration effect,
different types of refrigeration systems. 2 lectures
Unit II Vapor compression refrigeration system, limitation of reversed Carnot cycle with vapor as a
refrigerant, p-V, T-S and p-h diagrams, actual vapor compression cycle and their performance,
use of tables and charts for solving problems. vapour absorption refrigeration systems, 10 lectures
principles and application. domestic and commercial refrigeration system.
Unit III Refrigerant types, designation of refrigerants and their properties, desirable properties of
ideal refrigerants, selection of refrigerants, impact of refrigerants on global warming and
ozone depletion, environment friendly refrigerants, secondary refrigerants and their
applications. 6 lectures
Unit IV Air Conditioning: Working substance in air conditioning, psychometric properties, wet
bulb temperature, dry bulb temperature, thermodynamic wet temperature, relative humidity,
humid specific heat, psychometric chart, air conditioning processes, sensible and latent
heating, humidification and dehumidification, industrial airconditioning, problems related 10 lectures
to cold storage. Calculation of heat load and humidity in cold storage, refrigerator and
freezing systems.
Recommended Books:
1. Refrigeration and Air Conditioning, C.P.Arora, TataMcGrawHill, 3rd Ed., 2008.
2. Principles of Refrigeration, Roy, J. Dossat, Pearson, 4th Ed., 2010.
3. Refrigeration and Air Conditioning, R.C.Arora, PHI, 2010.
4. Refrigeration and Air conditioning, M. Prasad, New Age International, 2011.
132
Department of Chemistry
Programme: Degree
CY 4301 : Comprehensive Chemistry : 4 Credits (4-0-2)
Unit I Structure of the Atom: Rutherford’s model, hydrogen spectra, failure of
Rutherford’s model, Bohr’s model of hydrogen and hydrogen like atoms, modifi-
cation of Bohr’s theory, dual nature of particle and radiation, de-Broglie equation,
12 lectures
uncertainity principle, wave mechanical model of atom, concept of atomic orbit-
als, quantum numbers, Pauli’s exclusion principle, Hund’s rule and Aufbau prin-
ciple
Unit II Chemical Bond: Types of chemical bonds (ionic, covalent bond & coordinate
covalent), Van der Waals force, metallic and hydrogen bond. Periodic table and
periodic properties of elements: Mendeleev’s Periodic law, long form of Periodic 13 lectures
Table, merits and demerits of long form of Periodic Table, types of elements and
their general properties, factors affecting periodic properties.
Unit III Comparative study of s and p block elements: General properties and elec-
tronic configuration of s-block elements; their oxides, halides, hydroxides, car-
bonates, bicarbonates and nitrates. Properties of p-block elements with special 15 lectures
reference to the oxidation state, oxides, halides and hydrides.
Unit IV Redox Reactions: Oxidation and reduction process (classical and modern con-
cepts), oxidation state, calculation of equivalent weights of oxidizing and reduc-
6 lectures
ing agents, balancing of redox reactions using oxidation number change and ion
electron methods.
Unit V Electrochemistry: Electrolysis, laws of electrolysis, applications, electrical con-
ductance in solution, specific, equivalent and molar conductance. Kohlrausch’s
law, concept of weak and strong electrolytes. Galvanic cell: Electrode potential, 10 lectures
electrochemical series, calculation of e.m.f. from electrode potential
Recommended Books:
1. Modern’s a b c of Chemistry, (Vol- I & II), S. P. Jauhar and S.K. Malhotra, Modern Publishers, New Delhi
2. Principle of Physical Chemistry, B.R. Puri, L.R. Sharma, M.S. Pathania, 2013, Vishal Publishing Co.,
Jalandhar-2001
3. Modern Inorganic Chemistry, R.C. Agarwal, Kitab Mahal, Allahabad, 2005.
4. Comprehensive Chemistry (for Class XI and for Class XII), N.K. Verma & S.K. Khanna, Laxmi Publi-
cations (P) Ltd. New Delhi.
5. Chemistry Part-I & II, R.R. Mishra, B. Bhushan & H.R. Sharma, Arya Book Depot, New Delhi
6. Physical Chemistry, P.C. Rakshit, 7th Edn., 2004, Sarat Book Distributors, Calcutta
133
Unit III Lipids :Introduction, Fatty acids. Classification of lipids. Neutral fats and nomen-
7 lectures
clature. Physical and chemical properties of lipids. Acid value, saponification value
and iodine value of lipids. Study of simple, compound and derived lipids. Their bio-
logical roles.
Unit IV Proteins :Introduction, Classification, structure and properties of amino acids. Pep-
7 lectures
tides. Protein configuration ( primary, secondary, tertiary and quaternary structure).
Function of Proteins. Enzymes: Nomenclature, reaction kinematics, uses in food and
agriculture
Recommended Books:
1. Advanced Inorganic Chemistry, Vol I , S.Prakash, G.D. Tuli, S.K.Basu & R.D. Madan, New Edn.,
2006, S.Chand & Company Ltd, New Delhi.
2. Fundamentals of Biochemistry, J.L.Jain, S. Jain & N. Jain, 6th Edn., 2005, S.Chand & Co, New Delhi.
3. Biochemistry, C. K. Mathews, K.E. Van Holde & K. G. Ahern, 3rd Edn., 2007, Pearson Education, New Delhi.
4. Textbook of Biochemistry, A.L. Lehninger and D.M. Vasudevan, 6th Edn., 1982, The Macmillan Company.
5. Organic Chemistry, Paula Y Bruice, 7th Edn., 2012, Pearson New International Edition.
CY 5102 : Applied Chemistry- IB : 3 Credits (3-0-0)
Unit I Heavy metals, Organic wastes and Redox reactions in water: Introduc-
tion, Heavy metals, Metalloids, toxic metals and Nephrotoxic metals, some im-
portant diseases related to metals/heavy metals; Mixed ligand complexes of mer-
cury in natural waters with respect to OH and Cl and the behaviour of these
mercury complexes with respect to pCl vs pH, Formation of methyl mercury
compounds in water; Bio-transformation reactions of mercury in alkaline/neutral
and acidic medium; Sources of Arsenic in natural waters and its complex forma-
tions under anaerobic conditions, Biochemical effects of arsenic; Fate of organ- 11 lectures
ics in water - sorption of organic compounds, anionic and cationic behaviour of
organics in water, total dissolved organics in water, humic and fulvic acids in
water; Bio-degradation of organics in water - bio-transformation and mineraliza-
tion reactions, General rules of bio-transformation of organics in water; Oxida-
tion-reduction reactions in natural waters, pH, pE scales, derivation of relation
between pE and concentration of oxidized and reduced species – NERNST Equa-
tion, pE limits of water (Water stability boundaries).
Unit II Detergents and Pesticides: Detergents - surfactants, builders, classification
of synthetic detergents, Bio-degradation of detergents; Pesticides, Synthetic or-
ganic pesticides - Synthetic chlorinated hydrocarbon pesticides – their molecular
structures and properties, Synthetic organo-phosphorus pesticides – their mo-
9 lectures
lecular structures and properties, Synthetic carbamate pesticides – their molecu-
lar structures and properties, Types of s-Triazine pesticides – Chloro-s-Triazine
pesticides - their molecular structures and properties, Chemical stability of DDT
and Parathion.
Unit III Instrumental Techniques: Principle of ion-selective electrodes, Glass Mem-
brane Electrode, Solid-state Electrode – Fluoride ion selective Electrode, Liquid
Membrane Electrode, Gas sensing Membrane Electrode; Principle of Chemilu-
minescence, Analysis of ambient air NOx by Chemiluminescence method, Nu-
meral problems on Ion-selective electrodes, pH determinations, Chemilumines-
11 lectures
cence measurement, etc. Definition of Chromatography, Principle of Gas chro-
matography (GC) - instrumentation and method of analysis, Gas Detectors -
FID, TCD, PID, ECD, FPD, etc., Principle of High Performance Liquid
Chromatography(HPLC) - instrumentation and method of analysis.
134
Unit IV Atmospheric chemistry and Air pollutants: Regions of the Atmosphere, Smog
(Sulphurous) and photochemical smog - their formation in the atmosphere. Oxides
of Nitrogen in the atmosphere, Photochemical reactions of oxides of nitrogen in
absence of hydrocarbons and in presence of hydrocarbons in the atmosphere; Air 11 lectures
pollutants, Primary (1o) and Secondary (2o) air pollutants, Examples of 1o & 2o air
pollutants in solid, liquid and gaseous states; Criteria pollutants, Pollutants Standard
Index (PSI), Numerical problems on a day’s air pollution condition; Chlorofluorocar-
bons (CFCs) in the atmosphere, Du Pont numbers of CFCs, Stratospheric Ozone
depletion by CFCs; High volume sampler – sampling method, Inorganic particulate
matters in the atmosphere, Hydrocarbon particulate matters in the atmosphere –
their effects, natural and anthropogenic sources; Methods of analysis of ambient air
pollutants such as NO2 and SO2 by wet chemical method .
Recommended Books:
1. Colin Baird and Michael Cann, Environmental Chemistry, 5th Edn. (2012), W. H. Freeman and Com-
pany, New York.
2. Gary W. vanLoon and Stephen J. Duffy, Environmental Chemistry-A Global Perspective, 1st Indian
Edn. (2008), Oxford University Press.
3. Stanley E. Manahan, Environmental Chemistry, 6th Edn. (1994), Lewis Publishers.
4. Clair N. Sawyer, Perry L. McCarty and Gene F. Parkin, Chemistry for Environmental Engineering
and Science, 5th Edn. (2003), Tata McGraw-Hill Publishing Company Ltd, New Delhi.
5. Des W. Connell, Basic Concepts of Environmental Chemistry, Revised Edn. (2005), CRC Taylor and
Fancis Group.
6. Julian E. Andrews, Peter Brimblecombe, Tim. D. Jickells, Peter S. Liss and Brian J. Reid, An Intro-
duction to Environmental Chemistry, 2nd Edn. (2004), Blackwell Publishing.
7. Gilbert M. Masters, Introduction to Environmental Engineering and Science, 3rd Edn., (2015), Prentice-
Hall of India Pvt Ltd., New Delhi.
8. A.K. De, Environmental Chemistry, 7th Edn. (2007), New Age International (P) Ltd. Publishers.
9. C.R. Krishna Murti and Pushpa Vishwanathan, Toxic Metals in the Indian Environment, (1991), (re-
print 2009), Tata McGraw-Hill Publishing Company Ltd., New Delhi.
10. Galen W. Ewing, Instrumental Methods of Chemical Analysis, 5th Edn. (1985), McGraw-Hill Book
Company.
11. Gary D. Christian, Analytical Chemistry, 7th Edn. (2013), John Wiley and Sons, Inc.
135
CY 3102 : Environmental Chemistry (FO) : 4 Credits (3-0-2)
Unit 1 Heavy metals, Organic wastes and Redox reactions in water. Introduction,
Heavy metals, Metalloids, toxic metals and Nephrotoxic metals, some important
diseases related to metals/heavy metals; Mixed ligand complexes of mercury in 11 lectures
natural waters with respect to OH and Cl and the behaviour of these mercury
complexes with respect to pCl vs pH, Formation of methyl mercury compounds
in water; Bio-transformation reactions of mercury in alkaline/neutral and acidic
medium; Sources of Arsenic in natural waters and its complex formations under
anaerobic conditions, Biochemical effects of arsenic; Fate of organics in water -
sorption of organic compounds, anionic and cationic behaviour of organics in
water, total dissolved organics in water, humic and fulvic acids in water; Bio-
degradation of organics in water - bio-transformation and mineralization reac-
tions, General rules of bio-transformation of organics in water; Oxidation-reduc-
tion reactions in natural waters, pH, pE scales, derivation of relation between pE
and concentration of oxidized and reduced species – NERNST Equation, pE
limits of water (Water stability boundaries).
Unit II Detergents and Pesticides: Detergents - surfactants, builders, classification
of synthetic detergents, Bio-degradation of detergents; Pesticides, Synthetic or- 9 lectures
ganic pesticides - Synthetic chlorinated hydrocarbon pesticides – their mo-
lecular structures and properties, Synthetic organo-phosphorus pesticides – their
molecular structures and properties, Synthetic carbamate pesticides – their mo-
lecular structures and properties, Types of s-Triazine pesticides – Chloro-s-Tri-
azine pesticides - their molecular structures and properties, Chemical stability of
DDT and Parathion.
Unit III Instrumental Techniques: Principle of ion-selective electrodes, Glass Mem-
brane Electrode, Solid-state Electrode – Fluoride ion selective Electrode, Liquid 11 lectures
Membrane Electrode, Gas sensing Membrane Electrode; Principle of Chemilu
minescence, Analysis of ambient air NOx by Chemiluminescence method, Nu-
meral problems on Ion-selective electrodes, pH determinations, Chemilumines-
cence measurement, etc. Definition of Chromatography, Principle of Gas chro-
matography (GC) - instrumentation and method of analysis, Gas Detectors -
FID, TCD, PID, ECD, FPD, etc., Principle of High Performance Liquid
Chromatography(HPLC) - instrumentation and method of analysis.
Unit IV Atmospheric chemistry and Air pollutants: Regions of the Atmosphere, Smog 11 lectures
(Sulphurous) and photochemical smog - their formation in the atmosphere. Ox-
ides of Nitrogen in the atmosphere, Photochemical reactions of oxides of nitro
gen in absence of hydrocarbons and in presence of hydrocarbons in the atmo-
sphere; Air pollutants, Primary (1o) and Secondary (2o) air pollutants, Examples
of 1o & 2o air pollutants in solid, liquid and gaseous states; Criteria pollutants,
Pollutants Standard Index (PSI), Numerical problems on a day’s air pollution
condition; Chlorofluorocarbons (CFCs) in the atmosphere, Du Pont numbers of
CFCs, Stratospheric Ozone depletion by CFCs; High volume sampler – sampling
method, Inorganic particulate matters in the atmosphere, Hydrocarbon particu
late matters in the atmosphere – their effects, natural and anthropogenic sources;
Methods of analysis of ambient air pollutants such as NO2 and SO2 by wet
chemical method.
Rcommended Books:
1. Colin Baird and Michael Cann, Environmental Chemistry, 5th Edn. (2012), W. H. Freeman and Company,
New York.
2. Gary W. vanLoon and Stephen J. Duffy, Environmental Chemistry-A Global Perspective, 1st Indian Edn.
(2008), Oxford University Press.
136
3. Stanley E. Manahan, Environmental Chemistry, 6th Edn. (1994), Lewis Publishers.
4. Clair N. Sawyer, Perry L. McCarty and Gene F. Parkin, Chemistry for Environmental Engineering and
Science, 5th Edn. (2003), Tata McGraw-Hill Publishing Company Ltd, New Delhi.
5. Des W. Connell, Basic Concepts of Environmental Chemistry, Revised Edn. (2005), CRC Taylor and
Fancis Group.
6. Julian E. Andrews, Peter Brimblecombe, Tim. D. Jickells, Peter S. Liss and Brian J. Reid, An Introduction
to Environmental Chemistry, 2nd Edn. (2004), Blackwell Publishing.
7. Gilbert M. Masters, Introduction to Environmental Engineering and Science, 3rd Edn., (2015), Prentice-
Hall of India Pvt Ltd., New Delhi.
8. A.K. De, Environmental Chemistry, 7th Edn., (2007), New Age International (P) Ltd. Publishers.
9. C.R. Krishna Murti and Pushpa Vishwanathan, Toxic Metals in the Indian Environment, (1991), (reprint
2009)Tata McGraw-Hill Publishing Company Ltd., New Delhi.
10. Galen W. Ewing, Instrumental Methods of Chemical Analysis, 5th Edn., (1985), McGraw-Hill Book
Company.
11. Gary D. Christian, Analytical Chemistry, 7th Edn., (2013), John Wiley and Sons, Inc.
Recommended Books:
1. Fundamentals of Biochemistry, J. L.Jain, Sanjay Jain & Nitin Jain, New Edn., (reprint 2004), S. Chand &
Co., New Delhi.
2. Biochemistry, K. Trehan, 2nd Edn., New Age International (P) Ltd. Publishers, New Delhi, 1990 (reprint 2003).
3. Outlines of Biochemistry, 5th Edn., E.E. Conn & P.K. Stumpf. New Age International (P) Ltd. Publishers,
New Delhi, 1987.
4. Outlines of Biochemistry: A quick review, Rastogi, 1st Edn., 2007, CBS, New Delhi.
5. Concepts of Biochemistry, Boyer, 3rd Edn., 2005, Wiley Eastern (P) Limited, New Delhi.
137
Department of Mathematics
Programme: Degree
MA-4101 STATISTICAL METHODS 4 Credits (3-1-0)
Unit-I Types of data: Discrete and continuous data, frequency and non- 8 Lectures
frequency data, construction of tables (with one or more factors),
diagrammatic and graphical representation of grouped data.
Unit-II Maxima and minima of a function of two variables, necessary and 9 Lectures
sufficient conditions for the existence of maxima and minima of
f(x, y) at x = a, y = b, stationary and extreme points, Lagrange’s
method of undetermined multipliers, improper integratio n,
convergence of improper integrals, Beta and Gamma fucntio ns.
Unit-III Ordinary differential equation of first order and first degree, 8 Lectures
variable separable, homogenous equations, reducible to linear
form, exact differential equations, reducible to exact, different ia l
equation of first degree but of higher degree ( equation solvable
for p, for y and for x), Clairaut's equation, equations reducible to
Clairaut's form.
Unit-IV Ordinary differential equation of second order with constant 7 Lectures
coefficients, homogenous, non-homogenous different ia l
equations, variation of parameters method.
138
Unit-V Elementary transformations, rank of a matrix, solution of a system 9 Lectures
of linear simultaneous equations, eigen values and eigen vectors of
a matrix, Cayley-Hamilton theorem and its application to find the
inverse of a matrix.
Recommended Book:
1.Engineering Mathematics, N.P Bali, Laxmi Publication, New Delhi
References:
1. Differential Calculus, Shanti Narayan, S. Chand & Co. Ltd.
2. Integral Calculus, Shanti Narayan, S. Chand & Co. Ltd.
3. Advanced Engineering Mathematics, E. Kreyszig, Wiley Eastern Limited.
4. Matrices, Shanti Narayan , S. Chand & Co. Ltd.
Unit-IV Scalar and vector field, differentiation and integration of a vector 10Lectures
function, partial derivative of vectors, directional derivative of a
scalar point function, tangent plane and normal to a level surface,
arc length, binomial, gradient of a scalar field, divergence of a
vector point function, curl of a vector point function.
Unit-V Line integral, surface integral and volume integral, Green's 9 Lectures
theorem in the plane, Gauss's divergence theorem and Stoke's
theorem Statements only) and simple problems.
Recommended Books:
1. Advanced Engineering Mathematics, E. Kreyszig, Wiley Eastern Limited.
2. Engineering Mathematics, N.P Bali, Laxmi Publication, New Delhi
References.
1. Higher Engineering Mathematics, B.S. Grewal, Khanna Publishers, Delhi
2. Vector Analysis, M.R. Spiegel, McGraw Hill Book Company.
3. Advanced Mathematics for Engineers and Scientist, M.R. Spiegel, McGraw Hill Book Company.
139
MA-5101 ENGINEERING MATHEMATICS-III (AE) : 4 Credits (3-0-1)
Unit-I Solution of ordinary differential equations, solution of Legendre’s
and Bessel’s differential equations, introduction to partial 8 Lectures
differential equation, solution of two dimensional Laplace’s
equation.
Unit-II Fourier series, half range expansion, Fourier series of arbitrary 8 Lectures
function having arbitrary periods, Fourier integral, Introduction to
Fourier transform.
Unit-III Function of complex variables, analytic function, formation of
analytic function, complex integration, Cauchy integral theorem,
Cauchy integral formula and related problems. 9 Lectures
Recommended Books:
1. Advance Engineering Mathematics, E Kreyszig, John Wiley & sons, NY, 1999.
2. Engineering Mathematics, N. P. Bali, Laxmi Publication, New Delhi, 2007.
3. Numerical Methods, P. Khandasami, S. Chand & Company, New Delhi.
4. Ordinary and partial differential equations, M D Raisinghania, S Chand
Publications, 2005
References:
1. Higher Engineering Mathematics, B. S. Grewal, Khanna publishers, Delhi, 2000.
2. Numerical Methods with Programming in C, T. Veerarajan & T. Ramachandran, Tata McGraw-Hill
Publishing Company Limited, New Delhi.
MA-5102 ENGINEERING MATHEMATICS-IIIA (CE) : 4 Credits (3-1-0)
Unit-I Introduction to series solution of ordinary differential equations, Series 10 Lectures
solution of Legendre’s and Bessel’s differential equations, properties
of Legendre’s and Bessel’s function of first kind.
Unit-II Partial differential equations, solution of one dimensional heat, wave 7 Lectures
and Laplace’s equations by separation of variable methods.
Unit-III Fourier series, half range expansion, Fourier series of arbitrary 6 Lectures
function having arbitrary periods,
Unit-IV Fourier integral, Fourier transform and its properties, convolutio n 7 Lectures
theorem, inverse Fourier transform.
Unit-V Function of complex variables, analytic function, formation of 12 Lectures
analytic function, complex integration, Cauchy’s integral theorem,
Cauchy’s integral formula, singularities, Taylor’s and Laurent’s series.
140
Recommended Books.
1. Advanced Engineering Mathematics, E Kreyszig, John Wiley & sins, NY 1999
2. Higher Engineering Mathematics, B. S. Grewal, Khanna publisher, Delhi,2000
3. Churchil and Brown: Complex variables and its applications: McGraw-Hill, 8 th edition.
4. Ordinary and partial differential equations, M D Raisinghania, S Chand
Publications, 2005
Reference:
1. Engineering Mathematics, N. P. Bali, Laxmi Publication, New Delhi, 2007.
MA-5103 ENGINEERING MATHEMATICS-III B ( CSE) :4 Credits (3-1-0)
Unit-I Series solution of Legendre’s and Bessel’s differential equations, 9 Lectures
properties of Legendre’s and Bessel’s function of first kind.
Unit-II Fourier series, half range expansion, Fourier series of arbitrary 6 Lectures
function having arbitrary periods,
Unit-III Fourier transform, Fourier sine transform, Fourier cosine transform, 7 Lectures
Fourier integral ,inverse Fourier transform, application of Fourier
transform to solve boundary-value problems.
Unit-IV Function of complex variables, analytic function, formation of 10 Lectures
analytic function, complex integration, Cauchy’s integral theorem,
Cauchy’s integral formula, singularities, Taylor’s and Laurent’s series.
Recommended Books.
1. Advanced Engineering Mathematics, E Kreyszig, John Wiley & sins, NY 1999
2. Higher Engineering Mathematics, B. S. Grewal, Khanna publisher, Delhi,2000
3. Churchil and Brown: Complex variables and its applications: McGraw-Hill, 8 th edition.
4. Elementary number theory: David M. Burton, Universal Book Stall, New Delhi.
Reference:
1. Engineering Mathematics, N. P. Bali, Laxmi Publication, New Delhi, 2007.
Unit-III Fourier transform, Fourier sine transform, Fourier cosine transform, 7 Lectures
Fourier integral ,inverse Fourier transform, application of Fourier
transform to solve boundary-value problems.
Unit-IV Z-transform and its properties, inverse Z-transform, application of 7 Lectures
Laplace transform to solve linear ordinary differential equations with
constant and variable coefficients.
Unit-V Function of complex variables, analytic function, formation of 12 Lectures
analytic function, complex integration, Cauchy’s integral theorem,
Cauchy’s integral formula, singularities, Taylor’s and Laurent’s series,
calculus of residue.
Recommended Books.
1. Advanced Engineering Mathematics, E Kreyszig, John Wiley & sins, NY 1999
2. Higher Engineering Mathematics, B. S. Grewal, Khanna publisher, Delhi,2000
3. Churchil and Brown: Complex variables and its applications: McGraw-Hill, 8 th edition.
4. Ordinary and partial differential equations, M D Raisinghania, S Chand
Publications, 2005
Reference:
1. Engineering Mathematics, N. P. Bali, Laxmi Publication, New Delhi, 2007.
142
MA-5106 ENGINEERING MATHEMATICS-III E (ME) : 5 Credits (4-0-2)
Unit-I Power series, series solution of Legendre’s, Bessel’s differentia l 8 Lectures
equation of first kind, Fourier series, even and odd functio ns,
Fourier integrals.
Unit-II Solution of algebraic and transcendental equations by iteration, 8 Lectures
Newton-Raphson method, solution of linear simultaneous algebraic
equations by factorization, Jacobi, Gauss-Seidal methods, inverse
of matrices by Gauss-Jordan method, dominant eigen value by
power method.
Recommended Books:
1.Numerical methods, P. Khandashami, S.Chand & Company, New Delhi
2. Higher Engineering Mathematics, B.S Grewal, Khanna Publishers, Delhi,2000
3. Ordinary and partial differential equations, M D Raisinghania, S Chand
Publications, 2005
References:
1. Advanced Engineering Mathematics, E. Kreyszig, Wiley Eastern Limited.
2. Engineering Mathematics, N.P Bali, Laxmi Publication, New Delhi
143
Unit-III Combinatories: Basic counting principle arrangeme nts,
derangements, multinomial theorem, partitions and allocatio ns, 10Lectures
pigeon-hole principle, cardinality and countability, inclusio n-
exclution principle, recurrence relation, generating functions.
Unit-IV Posets, chain, well order sets, lattices, cardinal and ordinal 8Lectures
number.
Unit-V Formal logic, propositional logic, predicate logic, syntax and 8 Lectures.
semantics, rules of inference, derivation.
Recommended Books:
1. Discrete Mathematics with applications to computer science, J. P. Tremblay and R. P. Manohar, McGraw
Hill, 1989.
2. Introductory Discrete Mathematics, V. K. Balakrishnan, Dover, 1996.
References:
1. Discrete Mathematics and Graph Theory, B. Satyanarayana and K. S. Prasad, PHI, 2009
MA-5201 NUMERICAL METHODS : 4 Crdits (3-0-2)
Unit-I Solution of algebraic and transcendental equations by false
position, iteration and Newton-Raphson methods, Solution of 10 Lectures
linear simultaneous algebraic equations by factorization,Cro ut’s
Gauss-Jordan, Jacobi, Gauss-Seidal methods, inverse of matrices
by Crout’s and Gauss-Jordan methods, dominant eigen value by
power method.
Unit-II Introduction to finite differences, difference formula, 6 Lectures
Fundamental theorem of difference calculus, difference table,
expressing a function in terms of leading terms and leading
differences, the operator E, properties of operator E and D, one or
more missing terms, factorial notations, generalized factorial
notation, representation of a given polynomial into factorial
notation.
Unit-III Introduction to interpolation, Newton-Gregory forward and 9 Lectures
backward difference interpolation for equal intervals, divided
difference, relation between divided difference and ordinary
difference, Lagrange’s interpolation, Newton divided differe nce
interpolation, Hermite and Cubic Spline interpolation, central
difference operator, central difference interpolation, curve fitting
by group and least square methods.
Unit-IV Numerical differentiation, numerical integration, a general 8 Lectures
quadrature formula for equidistant ordinates, the trapezoida l’s
rule, Simpson’s 1/3 and 3/8 rules, Weddle’s rule and Romberg’s
integration method, numerical solution of ordinary different ia l
equation of first order and first degree by Euler’s modified
method, Picard’s method, Taylor’s series method, Runge-Kutta
method of order four, Milne’s Predictor-Corrector method.
145
Department of Physics
Programme: Degree
Recommended Books:
1. Concepts of Modern Physics, Arthur Beiser, Tata McGraw Hill, New Delhi.
2. Modern Physics, Keneth Krane, John Wiley & Sons.
3. Materials Science & Engineering, V. Raghavan, Prentice Hall of India.
4. Introduction to Solid State Physics, A. J. Dekker, McMillan India Ltd.
147
Department of Humanities & Social Sciences
Programme: Degree
Recommended Books:
1. Forest Economics and Valuation, M.M. Pant, Medhavi Publishers, Dehradun, 1984.
2. Forest Administration in India, S.K.Biswas, Chugh Publication, Allahabad, 1988.
3. Forest Economy, A. K. Jain, Vohra Publishers & Distributors, Allahabad, 1989.
4. Forestry Economic Development, M.M. Pant, Medhavi Publishers, Dehradun, 1986.
5. Forest Economics Planning and Management, L. C. Sharma, Bishen Singh Mahendra Pal Singh,
Dehradun, 1988.
6. The Theory and Application of Forest Economics, Colin Price, Basil Black Well Ltd., Oxford, 1989.
148
HS 4301 Elements of Economics : 3 Credits (3-0-0)
Unit-I Definition of Economics, Scope of Economics, Micro & Macroeconomics, 9 Lectures
Laws of Supply and demand, General market equilibrium. Elasticity of
demand and supply. Change in demand and supply and its effect on market
equilibrium.
Unit-II Consumers’ behaviour; Utility analysis, Indifference curve analysis, 8 Lectures
Consumers’ equilibrium, Price and income effects.
Unit-III Production Theory, Cost of production, supply curve and its theory, Market 9 Lectures
structure, Price and output determination under different market conditions
and Discriminating monopoly.
Unit-IV Business cycle, Demand forecasting. National Income Accounting, Inflation, 8 Lectures
Deflation.
Unit-V Cash flow analysis, Discounted Cash flow, Net Present Value, Time value of 8 Lectures
money, capital budgeting. Break even analysis and Ratio analysis.
Recommended Books:
1. Micro Economic Analysis- R.R. Barthwal, Wiley Eastern Ltd., New Deihl. 1999.
2. Principles of Micro Economics- D.D. Tewari & K. Singh, New Age International, New Delhi, 1996.
3. Modern Micro Economics, Kourtsoyanis, ELBS, McMillan, London, 1985:
4. Projects Planning, Formulation & Analysis, Prasanna Chandra, Tata McGraw Hill, New Delhi, 1996.
5. Financial Management, P. Chandra, Tata McGraw Hill, New Delhi, -19966. Financial Management,
Khan & Jain, Tata McGraw Hill, New Delhi, 1999.
HS 4401 Comprehensive Communication Skill: 3 Credits (2-0-2)
Unit-I Comprehension of unseen passages 5 Lectures
Unit-II Introduction to Prose and Narratives. 8 Lectures
149
Recommended Books:
1. Marketing Management Analysis, Planning & Control - Phillip Kotlee, Prentice Hall of India,
New Delhi, 1998. F.A.O. Forestry Papers. 1990.
2. Forest Economics and Valuation, M.M. Pant, International Book Distributors, Dehradun, 1984.
Recommended Books:
1. Agri-business and Entrepreneurship- Rajgopal, Indian Book & Periodicals, New Delhi, 1990.
2. Agribusiness and Rural Development- R.S. Jalal, Indian Book & Periodicals, New Dellli, 1991.
3. Fundamentals of Farm Business Management - S. S. Johl & R. R. Kapur, Kalyani Publishers,
Ludhiana, 1997.
4. Agriculture Business Management - W. David Downey & S.P. Erickson, Tata McGraw Hill,
New Delhi, 1996.
5. Farm Management, Planning, Control and Implementation - Ronald D. Kay, Tata McGraw Hill,
New Delhi, 1996.
150
OPEN ELECTIVES FOR FINAL YEAR DEGREE STUDENTS
HS 6001 Industrial Relations and Labour Laws: 3 Credits (3-0-0)
Unit-I Concept of Industrial Relations, Trade Unionism, Collective Bargaining 9 Lectures
and its Role.
Unit-II Workers participation in Management, Human Relations, Industrial Labour 9 Lectures
Organization in India
Unit-III Industrial Laws, Evolution of Industrial Laws, Factories Act, Trade Union Act. 8 Lectures
Unit-IV Workmen Compensation Act, Minimum Wages Act, Employees State Insurance 8 Lectures
Act, Provident Fund Act.
Unit-V Bonus Act, Gratuity Act, Industrial Disputes Act, Case Laws. 8 Lectures
Recommended Books:
1. Industrial Relations - Monappa, Tata McGraw Hill, New Delhi, 1985.
2. The Industrial Law - P.L. Mallik, Eastern Book Co. New Delhi, 1996.
3. Labour Participatory Economy - S Mahalingam & S.C. Smith, Mittal Publications, New Delhi,1993.
HS 6002 Engineering Ethics: 3 Credits (3-0-0)
Unit-I Scope and Aims of Engineering Ethics: What is Engineering Ethics? Why study 8 Lectures
Engineering Ethics? Morality, Mental Health and Executive Success.
Unit-II Moral Reasoning and Ethical Theories: Professional ideas and virtues. 9 Lectures
Unit-III Values-the vital core of Psychological growth: Values, Self-esteem, and Managerial 8 Lectures
Effectiveness.
Unit-IV The Ontological Foundation of Ethical management; The Nature of the Personas the 9 Lectures
basis of human Management.
Unit-V Engineers as Managers, Consultants, and Leaders. 8 Lectures
Recommended Books:
1. Ethics in Engineering – M.W. Martin and R. Schinzingler, Tata McGraw Hill, New Delhi,1997.
2. Managerial Dilemma and Executive Growth – F. V. Manning, Reston Publishing Co., Prentice Hall.
151
Recommended Books:
1. Management Accounting - Sharma & Gupta, Kalyani Publishrs
2. Cost Management - Jain & Narang
3. Financial Management - Khan & Jain, Tata McGraw Hill
4. Fundamental of Financial Management - P. Chandra, Tata McGrow Hill
5. Industrial Economics - R.R. Barthwal, New Age International
6. Accounting for Managers - N. P. Srivivasan, M. Saklrtivel Murugem, S. Chand & Sons, New Delhi.
7. Financial Management: I. M. Pandey, Vikadi Publishers
Recommended Books:
1. Marketing Management - A South Asian Perspective - Philip Kotler, Keller, Koshi, Jha, (13th Edition)
Pearson Education, New Delhi, 2007.
2. Marketing Management – B. K. Chatterjee, Jaico Publishing House, Delhi.
3. Marketing Management – Ranjan Saxena, Tata McGraw Hill, Publishing Com. Ltd., New Delhi.2002.
4. Marketing Management - A South Asian Perspective - Philip Kotler, Pearson Education, New Delhi,
2007.
152
153