Professional Documents
Culture Documents
EC 97911-205 FEATURES
Features
• 1600UT SystemTM1 is a high thermal performance, outside glazed, captured curtain
wall system
• Innovative design delivers high thermal performance while leveraging 1600 Wall
System architecture
products, such as glazed entrance, window, and curtain wall products, vary widely.
- 1" (25.4), 1-1/4" (31.8), 1-5/16" (33.34) double or 1-3/4" (44.5), triple glazed insulating
hardware, or glazing materials, and assumes no responsibility therefor.
glass units
- Aluminum or fiberglass pressure plates
• Thermal barrier design ensures high thermal performance without being susceptible to
thermal fatigue
• Offers integrated entrance framing systems
• Corners and splays
• Comprehensively tested to latest high performance air, water, structural and
thermal standards
• Glass chairs support insulating glass units enabling larger expanses of glass
• Pressure equalized system tested with vapor barrier
• Two color option
• PermanodicTM anodized finishes in seven choices
• Painted finishes in standard and custom choices
Optional Features
• Steel reinforcing
Kawneer reserves the right to change configuration without prior notice when deemed
• Human Impact
© 2013, Kawneer Company, Inc.
Product Applications
• Ideal for low to mid-rise applications where high thermal performance is desired
• High span applications
kawneer.com ADMD080EN
2
BLANK PAGE
ADMD080EN
1600UT SystemTM1 Curtain Wall
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
MAY, 2019 1600UT SystemTM1 Curtain Wall 3
EC 97911-205 INDEX
Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
PICTORIAL VIEW.................................................................................4
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
necessary for product improvement.
kawneer.com ADMD080EN
4
PICTORIAL VIEW
ADMD080EN
1600UT SystemTM1 Curtain Wall
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
6
6A
6B
(63.5)
2-1/2"
EC 97911-205
7
7B
7A
1
5
4
3
2
2A
1A
6" (152.4)
7-1/2" (190.5)
7A
6A
ADAPTER
ADAPTER
1/4" INFILL
1/4" INFILL
ELEVATION IS NUMBER KEYED TO DETAILS
7B
6B
STEEL
ADMD080EN
AS REQUIRED
REINFORCING
OPTIONAL
FIBERGLASS
2-1/2"
(63.5)
6" (152.4)
5
4
3
2
1
2A
1A
7-1/2" (190.5)
1" INFILL DETAILS
1600UT SystemTM1 Curtain Wall
TUBE
OPEN BACK
HORIZONTAL
HORIZONTAL
5
6
2
1
1A
B/H OR O/P
6
4
2
4
3/4"
3/4"
TYP.
TYP.
(19.1)
(19.1)
3
C/H
OFFSET PIVOT
OFFSET PIVOT
CENTER HUNG
DOOR JAMB
BUTT HUNG OR
DOOR JAMB
DOOR JAMB
BUTT HUNG OR
6
B/H OR O/P
NON-THERMAL ENTRANCE DETAILS (1" INFILL)
ADMD080EN
2-1/2" 1-3/4" 2-1/2" 1-3/4" 2-1/2" 1-3/4" 2-1/2"
(63.5) (50.8) (63.5) (50.8) (63.5) (50.8) (63.5)
1600UT SystemTM1 Curtain Wall
5
3
1
1A
SINGLE ACTING
SURFACE CLOSER
TRANSOM BAR
SURFACE CLOSER
TRANSOM BAR
TRANSOM BAR
TRANSOM BAR
OR FLOOR CLOSER
OR FLOOR CLOSER
CENTER HUNG WITH
OFFSET ARM CLOSER
CONCEALED OVERHEAD
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
(63.5)
2-1/2"
1"
(25.4)
OFFSET PIVOT
DOOR JAMB
BUTT HUNG OR
2
1
B/H OR O/P
ADMD080EN
2
2-1/4" 2-1/2"
(57.2) (63.5)
3
3
1
SURFACE CLOSER
TRANSOM BAR
TRANSOM BAR
OR FLOOR CLOSER
CONCEALED CLOSER
THERMAL ENTRANCE DETAILS (1" INFILL)
1600UT SystemTM1 Curtain Wall
7
8
(63.5)
2-1/2"
2A
1"
(25.4)
OFFSET PIVOT
OFFSET PIVOT
DOOR JAMB
DOOR JAMB
BUTT HUNG OR
BUTT HUNG OR
2
2A
1
1A
THERMAL ENTRANCE DETAILS (1" INFILL)
B/H OR O/P
ADMD080EN
1600UT SystemTM1 Curtain Wall
1" 2-1/2"
(25.4) (63.5)
ELEVATION IS NUMBER KEYED TO DETAILS
Additional information and CAD details are available at www.kawneer.com
1A
SURFACE CLOSER
SURFACE CLOSER
TRANSOM BAR
TRANSOM BAR
OR FLOOR CLOSER
OR FLOOR CLOSER
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
0° TO 5°
90° OUTSIDE CORNER
90° OUTSIDE CORNER
ADMD080EN
OTHER SPLAY OPTIONS AVAILABLE
Additional information and CAD details are available at www.kawneer.com
0° TO 5°
90° INSIDE CORNER
0° TO 5°
0° TO 5°
SPLAYED MULLION OPTIONS
5° TO 15°
5° TO 15°
ADMD080EN
1600UT SystemTM1 Curtain Wall
15° TO 25°
15° TO 25°
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
MAY, 2019 1600UT SystemTM1 Curtain Wall 11
EC 97911-205 WINDOWS
GLASSventTM UT Windows
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals
with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.
hardware, or glazing materials, and assumes no responsibility therefor.
HEAD
SILL
JAMB
Trim Cover available in
#29 Black anodized finish only.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com ADMD080EN
12
7
6A
6B
(63.5)
2-1/2"
7
7B
7A
1
5
4
3
2
2A
1A
6-3/4" (171.4)
8-1/4" (209.5)
1-3/4" INFILL DETAILS
6A
7A
1" INFILL
ELEVATION IS NUMBER KEYED TO DETAILS
1" INFILL
ADAPTER
ADAPTER
6B
7B
OPTIONAL
STEEL
FIBERGLASS
ADMD080EN
PRESSURE PLATE
AS REQUIRED
REINFORCING
1600UT SystemTM1 Curtain Wall
6-3/4" (171.4)
8-1/4" (209.5)
5
4
3
2
1
2A
1A
TUBE
OPEN BACK
HORIZONTAL
HORIZONTAL
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
1
1A
MAY, 2019
EC 97911-205
B/H OR O/P
6
4
2
4
3/4"
3/4"
TYP.
TYP.
(19.1)
(19.1)
3
C/H
6
OFFSET PIVOT
OFFSET PIVOT
CENTER HUNG
DOOR JAMB
BUTT HUNG OR
DOOR JAMB
DOOR JAMB
BUTT HUNG OR
5
B/H OR O/P
ADMD080EN
2-1/2" 1-3/4" 2-1/2" 1-3/4" 2-1/2" 1-3/4" 2-1/2"
(63.5) (50.8) (63.5) (50.8) (63.5) (50.8) (63.5)
1/8" 1/8" 1/8"
(3.2) (3.2) (3.2)
Additional information and CAD details are available at www.kawneer.com
5
3
1
1A
NON-THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
1600UT SystemTM1 Curtain Wall
SURFACE CLOSER
TRANSOM BAR
SINGLE ACTING
TRANSOM BAR
SURFACE CLOSER
TRANSOM BAR
TRANSOM BAR
OR FLOOR CLOSER
OR FLOOR CLOSER
CONCEALED OVERHEAD
13
14
(63.5)
2-1/2"
1"
(25.4)
OFFSET PIVOT
DOOR JAMB
BUTT HUNG OR
2
1
2-1/4" 2-1/2"
THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
(57.2) (63.5)
ADMD080EN
B/H OR O/P
2
1"
1600UT SystemTM1 Curtain Wall
1/8" 2-1/2"
(3.2) (25.4) (63.5)
3
3
1
SURFACE CLOSER
TRANSOM BAR
TRANSOM BAR
OR FLOOR CLOSER
CONCEALED CLOSER
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
(63.5)
2-1/2"
1"
(25.4)
OFFSET PIVOT
DOOR JAMB
BUTT HUNG OR
2
1
B/H OR O/P
ADMD080EN
1" 2-1/2"
(25.4) (63.5)
ELEVATION IS NUMBER KEYED TO DETAILS
Additional information and CAD details are available at www.kawneer.com
SURFACE CLOSER
TRANSOM BAR
OR FLOOR CLOSER
THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
1600UT SystemTM1 Curtain Wall
15
16
0° TO 5°
CORNERS (1-3/4" INFILL)
ADMD080EN
1600UT SystemTM1 Curtain Wall
0° TO 5°
90° INSIDE CORNER
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
MAY, 2019 1600UT SystemTM1 Curtain Wall 17
EC 97911-205 WINDOWS
GLASSventTM UT Windows
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals
with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.
hardware, or glazing materials, and assumes no responsibility therefor.
HEAD
SILL
kawneer.com ADMD080EN
18
1
2
6
5
4
3
AT SPANDREL
JAMB MULLION
2
BACKPAN DETAILS (1" INFILL)
MULLION AT SPANDREL
D.L.O. 2-1/2" (63.5) D.L.O.
ADMD080EN
1600UT SystemTM1 Curtain Wall
EXPANSION JOINT
6
4
3
Additional information and CAD details are available at www.kawneer.com
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
1
MAY, 2019
1
EC 97911-205
6
5
4
3
AT SPANDREL
JAMB MULLION
MULLION AT SPANDREL
ADMD080EN
EXPANSION JOINT
6
4
3
Additional information and CAD details are available at www.kawneer.com
5
BACKPAN DETAILS (1-3/4" INFILL)
1600UT SystemTM1 Curtain Wall
19
20 1600UT SystemTM1 Curtain Wall MAY, 2019
MISCELLANEOUS FRAMING EC 97911-205
Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and
modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified
to expand design flexibility. Please contact your Kawneer representative for further assistance.
162-064
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
1-1/4"
(31.8)
(50.8)
2-1/2"
(63.5)
2"
2-3/4"
(69.7)
(76.2)
3"
(120.7)
4-3/4"
2-1/2"
(63.5)
2-1/2"
OPTIONAL (63.5)
2-1/2"
BULL NOSE COVERS (63.5) DEEP MULLION
OPTIONAL
NOTE: 1-3/4" triple glazing similar. DEEP COVERS
Kawneer reserves the right to change configuration without prior notice when deemed
2-1/2"
(63.5)
3-1/4"
(82.6)
2-1/2"
(63.5) VARIES
2-1/2"
(63.5)
DOUBLE MULLION THERMAL
VENEER SYSTEM PERIMETER necessary for product improvement.
NOTE:
STOOL TRIMS REQUIRE 069271 TRIM CLIP PACKAGE
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
(63.5)
2-1/2"
(63.5)
2-1/2"
6-1/4" (158.8) 6-1/4" (158.8)
2-1/2" 2-1/2"
ADMD080EN
(63.5) (63.5)
1-1/4" INFILL DETAILS
7-3/4" (305.6)
6-1/4" (158.8)
7-3/4" (305.6)
6-1/4" (158.8)
MISCELLANEOUS FRAMING
1600UT SystemTM1 Curtain Wall
21
22 1600UT SystemTM1 Curtain Wall MAY, 2019
STORM SHELTER EC 97911-205
products, such as glazed entrance, window, and curtain wall products, vary widely.
60" X 96" (1524 X 2438.4 MM)
1
Laws and building and safety codes governing the design and use of Kawneer
2
ELEVATION IS NUMBER KEYED TO DETAILS
Kawneer reserves the right to change configuration without prior notice when deemed
HEAD
2-1/2"
(63.5)
JAMB SILL
* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals
with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 23
EC 97911-205 BLAST MITIGATION
1
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
2
Kawneer does not control the selection of product configurations, operating
hardware, or glazing materials, and assumes no responsibility therefor.
4 5
1
2-1/2"
(63.5)
HEAD
Kawneer reserves the right to change configuration without prior notice when deemed
6"
(152.4)
2
HORIZONTAL
necessary for product improvement.
4 5
JAMB MULLION
3
SILL
* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals
with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.
kawneer.com ADMD080EN
24
(63.5)
2-1/2"
JAMB
HUMAN IMPACT
3
7-1/2"
(190.5)
2
1
ADMD080EN
1600UT SystemTM1 Curtain Wall
2
1
ELEVATION IS NUMBER KEYED TO DETAILS
Additional information and CAD details are available at www.kawneer.com
SILL
HEAD
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
ADMD080EN
1" (25.4)
1" (25.4)
ANCHORING
1600UT SystemTM1 Curtain Wall
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
25
26
ANCHORING
STRUCTURAL STEEL
ANCHORING TO HORIZONTAL
ANCHORING TO VERTICAL
ADMD080EN
1600UT SystemTM1 Curtain Wall
1" (25.4)
1" (25.4)
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
MAY, 2019 1600UT SystemTM1 Curtain Wall 27
EC 97911-205 WIND LOAD / DEAD LOAD CHARTS
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104 MPa), STEEL 30,000 psi (207 MPa). Charted
Laws and building and safety codes governing the design and use of Kawneer
curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load
hardware, or glazing materials, and assumes no responsibility therefor.
utilized in allowable stress design. A conversion from Load Resistance Factor Design (LRFD) is provided. To convert
ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase in
allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact
your Kawneer representative for additional information.
DEADLOAD CHARTS
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1-3/4"
(44.5) thick glass supported on two setting blocks placed at the loading points shown.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com ADMD080EN
28 1600UT SystemTM1 Curtain Wall MAY, 2019
WIND LOAD CHARTS (1" INFILL) EC 97911-205
products, such as glazed entrance, window, and curtain wall products, vary widely.
21 28 8.5
Laws and building and safety codes governing the design and use of Kawneer
20 27
6
EQUAL
MULLION HEIGHT IN FEET
MULLION HEIGHT
MULLION HEIGHT
5
16 23 7
15 22
METERS
METERS
4.5
B 6.5
14 21
EQUAL
13 4 20
6
12 19
6" (152.4)
3.5 C
11 18 5.5
A
10 3 17
B D 5
9 16
C 2.5 E
8 15
D 4.5
7 E 14
2
6 171213 13 4
5 I = 3.662(152.42 x 104) 12
0 1 2 3 4 5 6 7 8 S = 1.662(27.24 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
Kawneer reserves the right to change configuration without prior notice when deemed
.5 1 1.5 2 .5 1 1.5 2
23 7 30
9
22 29
6.5
21 28 8.5
20 27
6
26
A 8
19
5.5
B
18 25
7.5
MULLION HEIGHT IN FEET
17 24
MULLION HEIGHT
MULLION HEIGHT
5
16 23 7
15 22
C
METERS
METERS
4.5
6.5
13 4 20
6
D
12 19
6" (152.4)
A 3.5
E 5.5
11 18
10
B
3 17
C 5
9 16
D 2.5
8 15
4.5
7
E 14
2
6 171214 13 4
5 I = 4.5071(87.60 x 104) 12
0 1 2 3 4 5 6 7 8 S = 1.968(32.25 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 29
EC 97911-205 WIND LOAD CHARTS (1" INFILL)
21 28 8.5
Laws and building and safety codes governing the design and use of Kawneer
20 27
6
Kawneer does not control the selection of product configurations, operating
8
19 26
hardware, or glazing materials, and assumes no responsibility therefor.
18 5.5 25
B 7.5
EQUAL
MULLION HEIGHT IN FEET
MULLION HEIGHT
MULLION HEIGHT
5
16 23 7
15 22
METERS
METERS
4.5
A C 6.5
14 21
7-1/2" (190.5)
EQUAL
13 4 20
B 6
12 19
C 3.5 D
11 18 5.5
D E
10 3 17
9
E 16
5
2.5
8 15
4.5
7 14
2
4
6
171215 13
5 I = 7.915(329.45 x 104) 12
0 1 2 3 4 5 6 7 8 S = 2.635(43.18 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
.5 1 1.5 2 .5 1 1.5 2
23 7 30
9
22 29
6.5 A
21 28 8.5
20 27 B
6
8
19 26
18 5.5 25 C
7.5
EQUAL
MULLION HEIGHT IN FEET
17 24
MULLION HEIGHT
MULLION HEIGHT
5
16 23 7
D
15 22
METERS
METERS
4.5
A 6.5
necessary for product improvement.
14 21
B E
7-1/2" (190.5)
© 2013, Kawneer Company, Inc.
EQUAL
13 4 20
6
C
12 19
3.5
11 18 5.5
D
10 3 17
E 5
9 16
2.5
8 15
4.5
7 14
2
6 171216 13 4
5 I = 9.594(399.33 x 104) 12
0 1 2 3 4 5 6 7 8 S = 3.163(51.83 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
kawneer.com ADMD080EN
30 1600UT SystemTM1 Curtain Wall MAY, 2019
WIND LOAD CHARTS (1" INFILL) EC 97911-205
products, such as glazed entrance, window, and curtain wall products, vary widely.
29 29
Laws and building and safety codes governing the design and use of Kawneer
28 8.5 28 8.5
25 25
7.5 7.5
24 24
MULLION HEIGHT
23 7 23 7
22 22
METERS
METERS
21
A 6.5
21
6.5
A
20 20
6
B 6
19 19
B 5.5 5.5
18 18
C
17 17
C 5 5
16 16
D
15
4.5 171216 171216 15
4.5
D E
14 W/162300 W/162301 14
Kawneer reserves the right to change configuration without prior notice when deemed
METERS METERS
.5 1 1.5 2 .5 1 1.5 2
30 30
9 9
29 29
28 8.5 28 8.5
27 27
8 8
26 26
A
25 25
7.5 7.5
MULLION HEIGHT IN FEET
MULLION HEIGHT IN FEET
24 24
MULLION HEIGHT
23 7 23 7
A B
METERS
22 22
METERS
D 5 E 5
16 16
15
4.5 171216 171216 15
4.5
E
14 W/162301/302 W/162301/302/303 14
Ia = 9.594(399.33 x 104) Ia = 9.594(399.33 x 104)
4 4
13 Sa = 3.163(51.83 x 103) Sa = 3.163(51.83 x 103) 13
Is = 7.893(328.53 x 104) Is = 9.347(389.05 x 104)
12 Ss = 3.462(56.73 x 103) Ss = 4.100(67.19 x 103) 12
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
kawneer.com
1
.5
MAY, 2019
2
EC 97911-205
3
1
4
D
E
C
B
5
1.5
METERS
6
2
7
SINGLE SPAN
4.5
5.5
6.5
7.5
8.5
METERS
MULLION HEIGHT
E=
A=
D=
C=
B=
10-1/2" (269.9)
20 PSF (960)
Design Load
40 PSF (1920)
30 PSF (1440)
60 PSF (2880)
50 PSF (2400)
Allowable Stress
ADMD080EN
171266
S = 8.279(135.67 x 103)
I = 36.451(1517.20 x 104)
Design Load
50 PSF (2400)
33 PSF (1580)
83 PSF (4000)
67 PSF (3200)
LRFD Ultimate
products, such as glazed entrance, window, and curtain wall products, vary widely.
8.5
Laws and building and safety codes governing the design and use of Kawneer
20 27
6
EQUAL
MULLION HEIGHT IN FEET
MULLION HEIGHT
MULLION HEIGHT
5 B
16 23 7
C
15 22
METERS
METERS
4.5
6.5
14 21
6-3/4" (171.5)
EQUAL
13 4 20
A D 6
12 19
B 3.5
11 18
E 5.5
C
10 3 17
9
D 16
5
E 2.5
8 15
4.5
7 171201 14
2
6 13 4
5 I = 5.035(209.57 x 104) 12
0 1 2 3 4 5 6 7 8 S = 1.993(32.66 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
Kawneer reserves the right to change configuration without prior notice when deemed
.5 1 1.5 2 .5 1 1.5 2
23 7 30
9
22 29
21
6.5 A
28 8.5
20 27
6
8
19 26
18 5.5 25
B
7.5
EQUAL
MULLION HEIGHT IN FEET
17 24
MULLION HEIGHT
MULLION HEIGHT
16
5
23
C 7
15
METERS
22
METERS
4.5
6.5
13 4 20
6
12
B
19
3.5 E
11 18 5.5
C
10 3 17
D 5
9 16
8
E 2.5
15
4.5
7 171202 14
2
6 13 4
5 I = 6.779(282.16 x 104)
12
0 1 2 3 4 5 6 7 8 S = 2.652(43.46 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 33
EC 97911-205 WIND LOAD CHARTS (1-3/4" INFILL)
28 8.5
Laws and building and safety codes governing the design and use of Kawneer
20 27
6
Kawneer does not control the selection of product configurations, operating
19 26
B 8
hardware, or glazing materials, and assumes no responsibility therefor.
18 5.5 25
7.5
C
EQUAL
MULLION HEIGHT IN FEET
MULLION HEIGHT
MULLION HEIGHT
5
16 23 7
D
15 22
METERS
METERS
8-1/4" (209.6)
4.5
A 6.5
14 21
B E
EQUAL
13 4 20
6
C
12 19
3.5
11
D 18 5.5
10 E 3 17
5
9 16
2.5 15
8 4.5
7
171203 14
2
13 4
6
I = 10.135(421.85 x 104)
5 12
0 1 2 3 4 5 6 7 8 S = 3.027(49.60 x 103) 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
.5 1 1.5 2 .5 1 1.5 2
23 7 30
9
22 29
6.5
B
21 28 8.5
C
20 27
6
8
19 26
18 5.5 25
D
7.5
E
MULLION HEIGHT IN FEET
17 24
MULLION HEIGHT
MULLION HEIGHT
5
16 23 7
15 22
METERS
METERS
A
8-1/4" (209.6)
4.5
6.5
necessary for product improvement.
14 21
B
© 2013, Kawneer Company, Inc.
EQUAL
13 4 20
C 6
12 19
D 3.5
11 18 5.5
10 E 3 17
5
9 16
2.5
8 15
4.5
7
171204 14
2
6 13 4
I = 12.736(530.11 x 104)
5 S = 3.791(62.12 x 103) 12
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
kawneer.com ADMD080EN
34 1600UT SystemTM1 Curtain Wall MAY, 2019
WIND LOAD CHARTS (1-3/4" INFILL) EC 97911-205
products, such as glazed entrance, window, and curtain wall products, vary widely.
29 29
Laws and building and safety codes governing the design and use of Kawneer
28 8.5 28 8.5
25 25
7.5 7.5
MULLION HEIGHT IN FEET
MULLION HEIGHT
23 7 23 7
22 22
METERS
METERS
21
6.5
21
A 6.5
20
A 20
B
6 6
B
19 19
C
18 5.5 18 5.5
C
17 17
16
5
16
D 5
15
D 171204 171204 15
E
4.5 4.5
14
E W/162300 W/162301 14
Ia = 12.736(530.11 x 104) Ia = 12.736(530.11 x 104)
4 4
13 Sa = 3.791(62.12 x 103) Sa = 3.791(62.12 x 103) 13
Is = 3.805(158.37 x 104) Is = 5.684(236.59 x 104)
12 Ss = 1.669(27.35 x 103) Ss = 2.493(40.85 x 103) 12
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
Kawneer reserves the right to change configuration without prior notice when deemed
METERS METERS
.5 1 1.5 2 .5 1 1.5 2
30 30
9 9
29 29
28 8.5 28 8.5
27 27
8 8
26 26
25 25
7.5 7.5
MULLION HEIGHT IN FEET
24 24
A
MULLION HEIGHT
23 7 23 7
A
22 22
necessary for product improvement.
METERS
METERS
6.5 B 6.5
16
D 5
16
5
E E
15
4.5
171204 171204 15
4.5
14
W/162301/302 W/162301/302/303 14
Ia = 12.736(530.11 x 104) Ia = 12.736(530.11 x 104)
4 4
13 Sa = 3.791(62.12 x 103) Sa = 3.791(62.12 x 103) 13
Is = 7.893(328.53 x 104) Is = 9.347(389.05 x 104)
12 Ss = 3.462(56.73 x 103) Ss = 4.100(67.19 x 103) 12
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
MULLION CENTERS IN FEET MULLION CENTERS IN FEET
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
kawneer.com
1
.5
MAY, 2019
2
3
EC 97911-205
4
5
1.5
METERS
C
A
D
E
6
2
7
SINGLE SPAN
4.5
5.5
6.5
7.5
8.5
METERS
MULLION HEIGHT
E=
A=
D=
C=
B=
11-1/4" (285.8)
20 PSF (960)
Design Load
40 PSF (1920)
30 PSF (1440)
60 PSF (2880)
50 PSF (2400)
Allowable Stress
171264
ADMD080EN
S = 8.816(144.47 x 103)
I = 42.441(1766.52 x 104)
Design Load
50 PSF (2400)
33 PSF (1580)
83 PSF (4000)
67 PSF (3200)
LRFD Ultimate
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
6" (152.4)
7-1/2" (190.5)
6
SPAN IN FEET
SPAN IN FEET
6
171213
171215
2
7
7
B
A
B
8
8
1
2
3
1
2
3
METERS METERS
DEADLOAD CHARTS (TUBULAR)
ADMD080EN
1600UT SystemTM1 Curtain Wall
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
6" (152.4)
5
7-1/2" (190.5)
SPAN IN FEET
SPAN IN FEET
6
6
171214
171216
2
2
7
7
A
B
A
B
8
8
1
2
3
1
2
3
METERS METERS
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
GLASS HEIGHT IN FEET
MAY, 2019
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
EC 97911-205
1
1
2
2
3
3
1
1
4
4
METERS
5
6-3/4" (171.5)
METERS
8-1/4" (209.6)
SPAN IN FEET
SPAN IN FEET
6
6
A
2
171203
171201
A
B
7
7
8
8
1
2
3
1
2
3
METERS METERS
ADMD080EN
B - 1-3/4" GLASS (1/8 POINT LOADING)
A - 1-3/4" GLASS (1/4 POINT LOADING)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
8-1/4" (209.6)
6-3/4" (171.5)
SPAN IN FEET
6
6
SPAN IN FEET
2
2
171204
7
171202
7
B
A
B
DEADLOAD CHARTS (TUBULAR)
1600UT SystemTM1 Curtain Wall
8
1
2
3
1
2
3
METERS METERS
37
38
0
1
2
6
7
8
9
10
11
12
13
0
1
2
3
4
5
6
7
8
9
10
11
12
13
3
4
5
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
5
A
SPAN IN FEET
6
6
SPAN IN FEET
171292
171296
2
2
(DOTTED)
7
7
8
8
1
2
3
1
2
3
METERS METERS
REINF.
171077
171292
171296
(DOTTED)
DEADLOAD CHARTS (OPENBACK)
ADMD080EN
1600UT SystemTM1 Curtain Wall
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
5
171293
171297
(DOTTED)
SPAN IN FEET
SPAN IN FEET
6
6
2
A
A B
7
B
8
8
1
2
3
1
2
3
METERS METERS
REINF.
171078
171293
171297
(DOTTED)
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
GLASS HEIGHT IN FEET GLASS HEIGHT IN FEET
MAY, 2019
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
EC 97911-205
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
5
SPAN IN FEET
SPAN IN FEET
6
6
171290
171294
2
2
B
(DOTTED)
7
7
A
B
8
8
1
2
3
1
2
3
METERS METERS
REINF.
171077
171290
171294
(DOTTED)
ADMD080EN
B - 1" GLASS (1/8 POINT LOADING)
A - 1" GLASS (1/4 POINT LOADING)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
5
171291
171295
(DOTTED)
SPAN IN FEET
SPAN IN FEET
6
6
2
2
A
7
B
A
B
DEADLOAD CHARTS (OPENBACK)
1600UT SystemTM1 Curtain Wall
8
1
2
3
1
2
3
METERS METERS
REINF.
171078
171291
171295
(DOTTED)
39
40
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
5
SPAN IN FEET
SPAN IN FEET
A
6
6
171290
171294
2
2
A
(DOTTED)
7
7
8
8
1
2
3
1
2
3
METERS METERS
REINF.
171077
171290
171294
(DOTTED)
DEADLOAD CHARTS (OPENBACK)
ADMD080EN
1600UT SystemTM1 Curtain Wall
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
1
1
2
2
3
3
1
1
4
4
METERS
METERS
5
5
171291
171295
(DOTTED)
SPAN IN FEET
SPAN IN FEET
6
6
2
A
A B
7
B
8
8
1
2
3
1
2
3
METERS
METERS
REINF.
171078
171291
171295
(DOTTED)
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
MAY, 2019 1600UT SystemTM1 Curtain Wall 41
EC 97911-205 THERMAL CHARTS
2-1/2" Typ.
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
D.L.O. D.L.O.
3'-0"
hardware, or glazing materials, and assumes no responsibility therefor.
SPANDREL
2-1/2" Typ.
4'-0"
VISION
D.L.O.
8'-0"
VISION
31'-3"
D.L.O.
6'-0"
SPANDREL
D.L.O.
9'-0"
VISION
5'-0"
Kawneer reserves the right to change configuration without prior notice when deemed
D.L.O.
Vision Area
Example Glass U-factor = 0.48 Btu/(ft2 · h · °F)
Total Area (Vision) = 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2
Percentage of Vision Glass = (Vision Area ÷ Total Area)100
necessary for product improvement.
Spandrel Area
Total Area (Spandrel) = 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2
kawneer.com ADMD080EN
42 1600UT SystemTM1 Curtain Wall MAY, 2019
THERMAL CHARTS EC 97911-205
(N
0.70
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
EX OR
O
System U-factor
0.60
A D
F
COG
M E
h·ft 2·°F
U-factor
Btu
0.48 0.53
PL S
0.46 0.50
0.44
0.42
E IGN
0.40
0.38
0.36 0.40
0.34
0.32
0.30
0.28
0.26
0.24 0.30
)
0.22
0.20
0.20
93%
95 90 85 80 75 70
Kawneer reserves the right to change configuration without prior notice when deemed
Spandrel
0.60
R-value
(N
2.00
EX OR
O
0.50
T
System U-factor
A D
F
M E
3.00
0.40
h·ft 2·°F
PL S
Btu
4.00
E IGN
0.21
0.20
11.00
15.00
)
19.00
30.00
0.10
95 90 85 80 75 70
91%
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 43
EC 97911-205 THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
necessary for product improvement.
0.16 (0.91)
© 2013, Kawneer Company, Inc.
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
kawneer.com ADMD080EN
44 1600UT SystemTM1 Curtain Wall MAY, 2019
THERMAL CHARTS EC 97911-205
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
0.36
0.31
0.21
Spandrel
Kawneer reserves the right to change configuration without prior notice when deemed
R-Value
R-2
0.16
R-3
R-4
R-5
0.11
R11
necessary for product improvement.
R-19
R-30
0.01
95 90 85 80 75 70
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
SHGC
COG
VT
COG
EC 97911-205
ADMD080EN
Vision Area / Total Area (%)
Vision Area / Total Area (%)
products, such as glazed entrance, window, and curtain wall products, vary widely.
0.42 0.50
Laws and building and safety codes governing the design and use of Kawneer
0.22 0.33
0.20 0.32
0.18 0.30
0.16 0.28
0.14 0.26
0.12 0.25
0.10 0.23
Kawneer reserves the right to change configuration without prior notice when deemed
SHGC Matrix 2 Visible Transmittance 2
Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4
0.75 0.68 0.75 0.67
0.70 0.64 0.70 0.63
0.65 0.59 0.65 0.58
0.60 0.55 0.60 0.54
0.55 0.50 0.55 0.49
0.50 0.46 0.50 0.45
necessary for product improvement.
0.45 0.41 0.45 0.40
© 2013, Kawneer Company, Inc.
0.40 0.37 0.40 0.36
0.35 0.32 0.35 0.31
0.30 0.28 0.30 0.27
0.25 0.24 0.25 0.22
0.20 0.19 0.20 0.18
0.15 0.15 0.15 0.13
0.10 0.10 0.10 0.09
0.05 0.06 0.05 0.04
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 47
EC 97911-205 THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
necessary for product improvement.
0.16 (0.91)
© 2013, Kawneer Company, Inc.
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
kawneer.com ADMD080EN
48 1600UT SystemTM1 Curtain Wall MAY, 2019
THERMAL CHARTS EC 97911-205
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
0.31
0.21
Spandrel
R-Value
Kawneer reserves the right to change configuration without prior notice when deemed
R-2
0.16
R-3
R-4
R-5
0.11
R11
R-19
R-30
0.01
95 90 85 80 75 70
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
VT
COG
SHGC
COG
ADMD080EN
Vision Area / Total Area (%)
Vision Area / Total Area (%)
products, such as glazed entrance, window, and curtain wall products, vary widely.
0.42 0.49
Laws and building and safety codes governing the design and use of Kawneer
0.22 0.32
0.20 0.31
0.18 0.28
0.16 0.27
0.14 0.25
0.12 0.23
0.10 0.22
Kawneer reserves the right to change configuration without prior notice when deemed
SHGC Matrix 2 Visible Transmittance 2
Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4
0.75 0.68 0.75 0.67
0.70 0.64 0.70 0.63
0.65 0.59 0.65 0.58
0.60 0.55 0.60 0.54
0.55 0.50 0.55 0.49
0.50 0.46 0.50 0.45
necessary for product improvement.
0.45 0.41 0.45 0.40
© 2013, Kawneer Company, Inc.
0.40 0.37 0.40 0.36
0.35 0.32 0.35 0.31
0.30 0.28 0.30 0.27
0.25 0.24 0.25 0.22
0.20 0.19 0.20 0.18
0.15 0.15 0.15 0.13
0.10 0.10 0.10 0.09
0.05 0.06 0.05 0.04
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 51
EC 97911-205 THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.80)
0.12 (0.68)
0.10 (0.57)
0.08 (0.45)
necessary for product improvement.
kawneer.com ADMD080EN
52 1600UT SystemTM1 Curtain Wall MAY, 2019
THERMAL CHARTS EC 97911-205
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
0.31
0.26
Kawneer reserves the right to change configuration without prior notice when deemed
0.16
Spandrel
R-Value
R-2
R-3
R-4 0.11
R-5
R11
necessary for product improvement.
R-15
R-19
R-30
0.01
95 90 85 80 75 70
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
VT
COG
SHGC
COG
MAY, 2019
EC 97911-205
ADMD080EN
Vision Area / Total Area (%)
Vision Area / Total Area (%)
products, such as glazed entrance, window, and curtain wall products, vary widely.
0.26 0.37
Laws and building and safety codes governing the design and use of Kawneer
Kawneer reserves the right to change configuration without prior notice when deemed
SHGC Matrix 2 Visible Transmittance 2
Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4
0.75 0.68 0.75 0.67
0.70 0.64 0.70 0.63
0.65 0.59 0.65 0.58
0.60 0.55 0.60 0.54
0.55 0.50 0.55 0.49
0.50 0.46 0.50 0.45
necessary for product improvement.
0.45 0.41 0.45 0.40
© 2013, Kawneer Company, Inc.
0.40 0.37 0.40 0.36
0.35 0.32 0.35 0.31
0.30 0.28 0.30 0.27
0.25 0.24 0.25 0.22
0.20 0.19 0.20 0.18
0.15 0.15 0.15 0.13
0.10 0.10 0.10 0.09
0.05 0.06 0.05 0.04
ADMD080EN kawneer.com
MAY, 2019 1600UT SystemTM1 Curtain Wall 55
EC 97911-205 THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.80)
0.12 (0.68)
0.10 (0.57)
0.08 (0.45)
necessary for product improvement.
kawneer.com ADMD080EN
56 1600UT SystemTM1 Curtain Wall MAY, 2019
THERMAL CHARTS EC 97911-205
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
products, such as glazed entrance, window, and curtain wall products, vary widely.
Laws and building and safety codes governing the design and use of Kawneer
0.31
0.26
Kawneer reserves the right to change configuration without prior notice when deemed
0.16
Spandrel
R-Value
R-2
R-3
R-4 0.11
R-5
R11
necessary for product improvement.
R-15
R-19
R-30
0.01
95 90 85 80 75 70
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
VT
COG
SHGC
COG
ADMD080EN
Vision Area / Total Area (%)
Vision Area / Total Area (%)
products, such as glazed entrance, window, and curtain wall products, vary widely.
0.26 0.36
Laws and building and safety codes governing the design and use of Kawneer
Kawneer reserves the right to change configuration without prior notice when deemed
SHGC Matrix 2 Visible Transmittance 2
Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4
0.75 0.68 0.75 0.67
0.70 0.64 0.70 0.63
0.65 0.59 0.65 0.58
0.60 0.55 0.60 0.54
0.55 0.50 0.55 0.49
0.50 0.46 0.50 0.45
necessary for product improvement.
0.45 0.41 0.45 0.40
© 2013, Kawneer Company, Inc.
0.40 0.37 0.40 0.36
0.35 0.32 0.35 0.31
0.30 0.28 0.30 0.27
0.25 0.24 0.25 0.22
0.20 0.19 0.20 0.18
0.15 0.15 0.15 0.13
0.10 0.10 0.10 0.09
0.05 0.06 0.05 0.04
ADMD080EN kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
MAY, 2019
EC 97911-205
ALUMINUM
ALUMINUM
FIBERGLASS
FIBERGLASS
ADMD080EN
PRESSURE PLATE
82
CONDENSATION RESISTANCE
CRF
81
79 76
FRAME GLASS
76
74
76
THERMAL CHARTS
1600UT SystemTM1 Curtain Wall
I-VALUE
78
77
68
71 67
FRAME GLASS
59
60
BLANK PAGE
ADMD080EN
1600UT SystemTM1 Curtain Wall
EC 97911-205
MAY, 2019
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed Laws and building and safety codes governing the design and use of Kawneer
necessary for product improvement. products, such as glazed entrance, window, and curtain wall products, vary widely.
Kawneer does not control the selection of product configurations, operating
© 2013, Kawneer Company, Inc. hardware, or glazing materials, and assumes no responsibility therefor.