Mass Calibration Laboratory
‘é-1403>
Document No.: WMCL/Doc-F-17
WEIGHTRONICS
(WMCL) An ISO 9001:2008 Company
Phone: 81-11-2776 1662 Telefax: +-11 2776 2663
Esra: ogeighorcsnot Webste waver.
Calibration Certificate
Issue Dated: 16-03-2018
Recommended Date for the
Next Calibration Mentioned
As Per Request of the Customer
Dated: 15-03-2021
Page No. of Pages
Certificate No.: WMCL/E/2018-03/2077
Calibrated for
Description of Instrument
20 kg, 10 kg, 5 kg, 2 kg, 1 kg, 500 9:
Identification No
Assumed Density (d)
Environmental Conditions
Standard (s) used
‘Traceability Standard (s)
Balance used for Calibration
Methodology of Calibration Adopted
Calibrated by: *
ZatbePathak
Technical Manager
Date of Calibration: 15-03-2018
SHREE RADHEY TECHNOLOGY
5-19-20, RIICO Industrial Area,
Bindayaka, Jaipur ~ 302 012,
Rajasthan, INDIA
Make ~ “WEIGHTRONICS”
Stainless Steel Knob Type Cylindrical Weights
WT/AS-I1/2018/2077
(7 950 + 140) ka/m?; (k=2) for Stainless Steel
‘Temperature (23.0 + 2.0)°C
Relative Humidity : (50.0 + 10.0) %
[Change in temperature during the calibration were
less than + 0.7°C per hour]
WMCL working standard of mass with uncertainty
Better than one-third of the reported uncertainty of
measurement
‘The Standard used for Calibration are Traceable
from “NPL” New Delhi, INDIA vide Calibration
Certificate No.: 16090634/D1.01/C-125/amend,
Dated: 01/12/2016 valid up to Dated: 01/12/2019
(Copy of Traceability Certificates Enclosed)
Precision Balances of Appropriate Accuracy
Traceable to Mass Standards
The Method of comparison with standard (s) using
Substitution Weighing Method and (ABBA or ABA)
Weighing Cycle, The Reported Mass Values(s) is
(2re) the conventional mass value(s) (Mc) related to
the true mass value(s) (Mz) by formula: Mc=Mr [1
1.2(1/d-1/8000)], (Where,‘d’ is in kg/m?)
(Cal. Procedure No.: WMCL/ Doc-13/Cal- PR-01)
Authorized SignatoryWEIGHTRONICS
An ISO 9001:2008 Company
(0-46, ect, DSIDC,Bavana, Debi 110 09, NDIA
Phone: 11-2776 1062 Teel: +0111 - 27762663
mal: fo@weghrons.et Wise: wrmneighrrcs. nt
Document No.: WMCL/Doc-F-17 Issue Dated: 16-03-2018
Recommended Date for the Page No. of Pages
Next Calibration Mentioned
As Per Request of the Customer 2 2
Dated: 15-03-2021
WMCL/E/2018-03/2077 Date of Calibration: 15-03-2018
Denomination Mass Value (a) Uncertainty (+9)
6 20 kg 20 000.004 0.01
5 10 ka 10 000.002 0.005
E Ska 4.999.999 0.002 5
3 2ko 2.000.000 9 0.001 0
2 1kg 1.000.000 3 0.000 5
1 500 4 500.000 5 0.000 25
Remarks: Mass Values of all the weights are conventional mass values and within the maximum
errors permissible in “E:” Accuracy Class of Weights as per OIML R 111-1:2004.
‘The Reported uncertainty Is at coverage factor k=2 which corresponds to a coverage probability
of approximately 95% for a normal distribution. The contribution of uncertainty originating from
the standard used, the weighing process, drift in standard and the air buoyancy correction are
taken in to account.
Notes: This Calibration Certificate may not be reproduced except in full, unless written
Permission for Publication of an approved extract has been obtalned from the Laboratory
(WMCL).
The Calibration results reported in this Certificate are valid at the time of and under the stated
conditions of measurement.
‘The Calibration Certificate issued for Weights used for Scientific or Industrial purposes only.
ued by:
Pathak Lalit Shakiw’(Q.M.)
‘echnical Manager Authorized Signatory