Professional Documents
Culture Documents
Network PDF
Network PDF
com/2019/student/profile/35615
Preeti Kumari
(Enroll User) Sign out
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
Q. 1
HOME
MY TEST
BOOKMARKS
MY PROFILE If it is applied to a pure inductance of 20 mH, then the corresponding voltage waveform will be
Solution Video Have any Doubt ?
REPORTS
A Your answer is Wrong
BUY PACKAGE
ASK AN EXPERT
OFFER
B
C Preeti Kumari
(Enroll User) Sign out
Preeti Kumari
Course: GATE
D Correct Option
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS Solution :
(d)
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 2
A 0.07 V
B 2V
C 6.58 V Your answer
Preeti Kumari is Correct
(Enroll User) Sign out
Solution :
(c)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
D 13 V
QUESTION ANALYTICS
Q. 3
A 2.5 A
B 4A
Solution :
(c)
D 12 A
QUESTION ANALYTICS Preeti Kumari
(Enroll User) Sign out
Q. 4
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
If vi(t ) = (2cos 2t ) V, then the steady state output voltage vo(t ) will be
HOME FAQ Solution Video Have any Doubt ?
MY TEST A
BOOKMARKS
B Correct Option
MY PROFILE
REPORTS
Solution :
(b)
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 5
A 726.43 Hz
B 1.02 kHz
C 2.182 kHz Your answer
Preeti Kumari is Correct
(Enroll User) Sign out
Solution :
(c)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
D 4.24 kHz
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT
Q. 6
OFFER
In the following circuit, some measurements were made at the terminals a and b, and given in the table below:
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
The Thevenin’s equivalent of the unknown network across the terminals a and b is
Solution Video Have any Doubt ?
A 12 V and 3 Ω
B 16 V and 5 Ω
Solution :
(c)
D 24 V and 3 Ω
QUESTION ANALYTICS
Q. 7
If the value of voltage Vo = 11.2 V, then its value due to the current source Is alone will be
Solution Video Have any Doubt ?
A 8V Preeti Kumari
(Enroll User) Sign out
B 11.2 V
Solution :
Preeti Kumari (c)
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
D Data insufficient
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
QUESTION ANALYTICS
Q. 8
For the network shown in the figure below, the switch is at position (1) initially. After reaching the steady state, if the position of the switch
changes to (2), then the current ‘i’ for t > 0 will be
Solution :
(d)
QUESTION ANALYTICS
Q. 9 Preeti Kumari
(Enroll User) Sign out
Consider the circuit shown below:
If the switch ‘S’ in the circuit is opened for a long time and closed at t = 0, the current through the battery at t = 0+ and t = ∞ are respectively
Preeti Kumari Solution Video Have any Doubt ?
Course: GATE
Electronics Engineering(EC)
A 0 A and 0 A
HOME
B 0 A and 10 A
MY TEST
C 10 A and 0 A
BOOKMARKS
REPORTS
Solution :
(d)
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 10
B Correct Option
Solution :
(b)
QUESTION ANALYTICS
Q. 11
The power supplied to a particular network by a certain battery is a constant 4 W over the first 5 sec, zero for the following 2 sec and then
Preeti Kumari
increases linearly from 0 to 8 W during the next 10 sec and again decreases linearly from 8 W to 0 W in the following 7 sec.
(Enroll The total energy
User) Sign out
supplied to the network during this 24 sec interval will be _______ J.
Solution Video Have any Doubt ?
88 Correct Option
Solution :
88
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
Your Answer is -4
ASK AN EXPERT
Consider the figure shown below, in which the power absorbed by each unknown element is marked on it.
2 Correct Option
Solution :
2
Your Answer is 1
QUESTION ANALYTICS
Q. 13
In a parallel RLC circuit the component values are given as L = 2 H and C = 0.25 F. In order to make the system critically damped, the value
of resistance R should be ______ Ω.
Solution Video Have any Doubt ?
Solution :
1.414 (1.35 - 1.45)
QUESTION ANALYTICS
Q. 14
In the circuit shown below, the power loss in 1 Ω resistor is _____ W. Preeti Kumari
(Enroll User) Sign out
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 15
A 20 μF capacitor is initially charged to 50 V DC. It is then allowed to discharge through a resistance R. If after 10 seconds the potential
difference across the capacitor is 25 V, then the value of R will be _____ kΩ.
Solution Video Have any Doubt ?
Solution :
721.34 (720 - 723)
QUESTION ANALYTICS
Q. 16
Preeti Kumari
The h-parameter matrix of a particular network ‘N’ shown below is If the power dissipated in the load resistor of 4 Ω is 25 W,
(Enroll User) Sign out
HOME Solution :
58
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 17
If the value of R = 5 Ω, then the equivalent resistance seen across the terminals a and b will be
Solution Video Have any Doubt ?
A 0.533 Ω Preeti Kumari
(Enroll User) Sign out
Solution :
(b)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
C 4.0 Ω
D 20 Ω
QUESTION ANALYTICS
Q. 18
The value of voltage Vo when terminals a and b are opened and the current through the terminals ‘a’ and ‘b’ when they are shorted will be
respectively
FAQ Solution Video Have any Doubt ?
A Vo = 2 V, = 0.2 A Preeti Kumari
(Enroll User) Sign out
B Vo = 2 V, = –0.12 A
Solution :
Preeti Kumari (c)
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
D Vo = –1.33 V, = 0.2 A
QUESTION ANALYTICS
Q. 19
In a series RLC circuit with R = 20 Ω, the circuit current lags behind the applied voltage by 30° and the instantaneous drop across the
inductance is given by vL = (100sin 377t ) V. If the maximum inductance voltage is twice of the maximum capacitance voltage, then the
values of the inductance and the capacitance will be respectively
Solution Video Have any Doubt ?
Solution :
(d)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 20
The total steady state energy stored by the inductor and the capacitor together in a parallel RLC circuit at any instant at resonant frequency
is given by
(Assume circuit is excited by a sinusoidal voltage with a peak value of Vm).
Solution Video Have any Doubt ?
C Correct Option
Solution :
(c)
QUESTION ANALYTICS
Q. 21
A resistance array is connected to a load resistor R and a 9 V battery as shown in the figure below: Preeti Kumari
(Enroll User) Sign out
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
B 37.14 Ω
C 40 Ω
D 61.51 Ω
QUESTION ANALYTICS
Q. 22
Consider the figure shown below: Preeti Kumari
(Enroll User) Sign out
Given that, Zs = (100 + j 200) Ω and Vs = 250sin 500t V. Assuming ZL to be the parallel combination of R and C. The values of R and C such
that the maximum power will transfer from source to load are
Solution Video Have any Doubt ?
Preeti Kumari
Course: GATE
A C = 8 μF, R = 500 Ω Correct Option
Electronics Engineering(EC)
Solution :
HOME (a)
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
B C = 5 μF, R = 500 Ω
C C = 5 μF, R = 100 Ω
D C = 8 μF, R = 100 Ω
QUESTION ANALYTICS
Q. 23
The terminal voltage of the voltage source is 6 V when connected to a 3 W load and 6.5 V when the load is disconnected. The source
voltage Vs and its internal resistance RS will be respectively
Solution :
(b)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 24
The energy dissipated by the resistor for 0 < t < 0.6 ms will be approximately
Solution Video Have any Doubt ?
Solution :
(a)
B 400 μJ
C 800 μJ
D 1600 μJ
QUESTION ANALYTICS
Q. 25
In the circuit shown below, the initial current through the inductor is i (0–) = 6 A.
If the switch is closed at t = 0, then the time domain expression of the current i(t ) for t > 0 will be
Solution Video Have any Doubt ?
A Preeti Kumari
(Enroll User) Sign out
B Correct Option
Solution :
(b)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 26
In the figure shown below, N is a two port network. If = 1 A, then the values of V1 and V2 will be
Solution :
(a)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 27
Solution :
-3.818 (-4.25 - -3.25)
Preeti Kumari
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 28
If v = 2cos 500t V, then the value of maximum steady state energy stored in the network is _______ μJ.
Solution Video Have any Doubt ?
Solution :
470.58 (465 - 475)
QUESTION ANALYTICS
Q. 29
For the circuit shown below, the current through 10 Ω resistance is ____________ A. Preeti Kumari
(Enroll User) Sign out
Preeti Kumari
Course: GATE Solution Video Have any Doubt ?
Electronics Engineering(EC)
0.43 (0.35 - 0.50) Correct Option
HOME
Solution :
MY TEST 0.43 (0.35 - 0.50)
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 30
A black box with a circuit in it is connected to a variable resistor. An ideal ammeter and an ideal voltmeter are used to measure current and
voltage as shown in the figure below. If the results are shown in the table below, then the current for R = 6 Ω will be _______ A.
Solution :
1.125 (1.00 - 1.24)
QUESTION ANALYTICS
Q. 31
If the initial voltage across the capacitor shown in the figure below is 80 V and the switch is closed at t = 0, then the time Kumari
Preeti at which the
energy stored in the capacitor drops to half of it’s initial value will be ______ μsec. (Enroll User) Sign out
Solution :
HOME 34.65 (34.00 - 35.50)
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 32
If 5 μF capacitor is initially charged with 500 μC, all other capacitors are initially relaxed and the switch is closed at t = 0, then the voltage
drop vR(t) across the 10 Ω resistor at t = 5 μsec will be ______ V.
Solution Video Have any Doubt ?
Solution :
81.87 (81.75 - 82.00)
QUESTION ANALYTICS
Q. 33
Consider the circuit shown below: Preeti Kumari
(Enroll User) Sign out
Preeti Kumari The magnitude of the impedance parameter Z11 of the above circuit at ω = 1 rad/sec is _____ Ω.
Course: GATE Solution Video Have any Doubt ?
Electronics Engineering(EC)
7.40 (7.00 - 7.80) Correct Option
HOME
Solution :
MY TEST 7.40 (7.00 - 7.80)
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS