sine 8163-2006
have an electrodeposited zine coating conforming to
ASTM B 633, Type J, Service Condition 4. Hot-dipped.
coatings shall be 0,0034 in. minimum thickness and
applied prior to threading. Electrodeposited zine shall
be O001 in, minimum thickness and may be applied
ether before or after threading.
11.2. Steel Fittings
‘Couplings and caps made from steel rod or bar may
have electrodeposited zine coatings conforming to
ASTM B 633, Type I, Service Condition 4. The elec-
trodeposited coatings may be applied either before or
after threading,
11.3 Other Coatings
‘Other coatings specified by the purchaser shall be
furnished meeting the agroed requirements,
Table 1 Pressure-Temperature Ratings
Wiring Pressure, bar
ass 300
Temperature,
*c Cass 150
-29 1065 207
190 v5
125 152
150 ys
175 205 [te
200 7
as
250
2s
208
Noe:
Be 1034 690
196 905615
1064 sa S61
1a
79 615452
6665388
53408 3
1 58D
2952S
207207207
(2) Permissible for service temperature up to 186%, eecting the
temperature 0” Saturted steam: at 10-3 bar
Table 2 Inspection Tolerances
WS
Telerance
%
wh
ath
42
3.3%
‘65
é
108
0
a3
a5
a8
220
28
30
26
SSO na save