You are on page 1of 1

3. A work shop of size 18.0 Mt.×9.0 Mt.

is to be illuminated by Printed Pages—2 AR506


40W fluorescent lamps of lumen output of 2700 Lumens. The
average illumination required at work place is 400 Lux. Calculate (Following Paper ID and Roll No. to be filled in your Answer Book)
the number of lamps required to be fitted in the work shop. PAPER ID : 8517 Roll No.
Assuming the Coefficient of Utilization to be 0.60 and
Maintenance Factor to be 0.75. (10) B.Arch.
(SEM. V) ODD SEMESTER THEORY
SECTION–B (25 marks) EXAMINATION 2012-13
4. Two lamps and two fans are to be controlled independently by BUILDING SERVICES (EL)
separate switches. The switches and fan regulators are placed
Time : 3 Hours Total Marks : 50
on one switch board. Draw a wiring diagram in joint box as well
as looping-in-system of wiring. (5) Note :– (i) All questions are compulsory.
(ii) Both sections are compulsory.
5. Write illustrated notes in detail on any two of the following : (iii) Assume any missing data.
(a) Installation of Wooden Batten Wiring. SECTION–A (25 marks)
(b) What is Earthing ? How it is done ? 1. Explain any two of the following. Support your answer with
(c) Uses of Cartridge fuse over Rewire able fuse. neat free hand sketches.

(d) Need to protect Electrical installations. (5×2=10) (a) Street Lighting


(b) 3 Phase, 4 Wire distribution system

6. Firstly, draw a furniture layout plan of a hostel room of an (c) Maintenance Factor
architecture student of size 3.6 Mt. × 3.0 Mt., assuming the (d) Luminous Intensity. (2.5×2=5)
location of doors and windows. Thereafter, suggest the location
of various electrical fixtures and electronic equipments in it. 2. Differentiate between the following. Attempt any (two)
Finally, propose an electrical layout plan and also write down
(a) Illuminance and Luminance
various considerations you have made, while designing. (10)
(b) Direct lighting and General diffusing
(c) Scattering of light and Dispersion of light
(d) Fluorescent Lamp and Gaseous Discharge Lamp. (5×2=10)
AR506/DLT-44420 450 AR506/DLT-44420 [Turn Over

You might also like