M.E.FORGE TECH
Plot No 234,11th Main 3rd Cross ,3rd Phase
Peenya Industrial Area
Bangalore-560 058
Report No : 6221
ULTRASONIC INSPECTION REPORT
Date : 13.3.2020
laty 10 +10 Nos WO NO : 79519,79520
Customer : Mis KSB MIL Controls
Po No 112383/27.2.2020
Name of part
1] BODY EXTN.FORGING 221000 BS W/O HELICOF rg no 606089/1 - 10 Nos.
2] BONNET FORGING2"21000BS<=300# W/O HELICO Drg no 606090/2 - 10 Nos
‘Material Specification
|Surface Condtion
Equipment
[Transducer size &Freqency
Range of CRT
Technique
[Scanning
Reference Std: : SA 388
Reference Block
Settings
Observed and Remarks _:
: ASTMA 105
: OPEN - forge
Einstein il TFT
: Dia 10mm,20mm - 2 MHz Normal
:0- 200mm
Pulse Echo
Manual Couplant Used :O1L,
Acceptance standard ASME B16.34 Appendix IV
IW BLOCK Heat No : £84601
Batch no : 4402
2+60B
No recordable indications Observed
identification Details : MEFT /ASTM A105/E84601/4402 part.No. Punched on all the forgings
Approved By
ACCEPTED
ASNT Level I, UT,PT&MTME. FORGEHE TEeCEr
Plot No 234,1 1th Main 3rd Cross ,3rd PhasePeenya Industrial Area Bangalore-560 058
MAGNETIC PARTICLE INSPECTION REPORT
IREPORT No: 6221 /13.3.2020
QTY 1:10 +10 Nos. WO NO : 79519,79520
Customer : M/s KSB MIL Controls Limited
PO NO :112383/27.2.2020
Name of part:
1] BODY EXTN.FORGING 2"21000 BS W/O HELICOF _Drg no 606089/I - 10 Nos
2] BONNET FORGING2"21000BS<=300# W/O HELICO Drg no 606090/2 - 10 Nos
Stage of test: Topen- Forge
Material Specification: ‘ASTM A105
Equipment Used ‘Magna Flux Yoke Type
Type of Current DC/AC
‘Type of Magnetization _—_:Longitudinal
Pole Spacing :4".6"
Methode of Exam Wet Visible
Procedure Std ‘ASTM A 275
Acceptance MSS-SP-53 ASME B16.34 Appendix 2
Heat No/Batch No: +: £84601/4402
TEST RESULT
Under the above conditions of testing, No Relevant indication observed. Accepted