Professional Documents
Culture Documents
Be301 02 PDF
Be301 02 PDF
INDEX
Introduction •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4
■ Accesories •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 30
Special Valves
■ 3-Way Type Y Ball Valve ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 46
E100JNC EMSJ4300NB
– 4 –
■ Tough Seal Type V Port Valve
Lever Operated Pneumatic Electric
T100S TPO1100S
EKTON1100N YWN1300
– 5 –
Manual Ball Valves
Before Seat Burnout After Seat Burnout Before Gasket Burnout After Gasket Burnout
Figure 1 Figure 2
● Standard Specification
● Nominal Size: Full Port Floating Ball (F100NB), DN15 to 200
● Face-to-Face Dimension: ISO5752 Compliant
● Connection: Flange
J10K, J20K, Class (ANSI, JPI) 150, 300
● Parts Materials: Body — Carbon Cast Steel: SCPH2 (WCB)
Spheroidal Graphite Cast Iron: FCD400
Stainless Cast Steel: SCS13A (CF8) , SCS14A (CF8M), SCS16A (CF3M)
Ball — SUS304 (SCS13A), SUS316 (SCS14A), SUS316L (SCS16A)
Seat — New-PTFE and others (A page 8 is referred to)
● Pressure-Temperature Range: Please see the seat rating table.
● Operation Style: Lever Operated, Gear Operated
Pneumatic (Double/Reverse/Direct Acting)
Electric
● Coating (Body): Only Anti-Corrosive Coating (Except for Stainless Steel)
– 6 –
■ Fire-Safe Ball Valve (F100NB)
● Standard Configuration
Materials
Parts
Ductile Cast Iron Stainless Cast Steel Cast Steel
1 Body FCD400 SCS13A SCS14A SCS16A SCPH2
2 Cap FCD400 SCS13A SCS14A SCS16A SCPH2
SUS304 SUS304 SUS316 SUS316L SUS304
3 Ball or or or or or
SCS13A SCS13A SCS14A SCS16A SCS13A
4 Seat NTF, NCF, and others
7 Stem SUS304 SUS304 SUS316 SUS316L SUS304
8 Gasket New-PTFE
12 Packing New-PTFE
12A Bearing New-PTFE
12B Thrust Washer New-PTFE
15A Gland Flange SCS13A
15B Gland SUS304
15C Bearing New-PTFE
15D Wire Spring SUS304
16 Travel Stop SUS304
17 Handle SCPH2 (15A/100A), SCPH2 + STK490 (125A/200A)
17B Retaining Ring SUS304
18 Stud Bolt SNB7 SUS304 SUS304 SUS304 SNB7
18A Nut S45C SUS303 SUS303 SUS303 S45C
19 Cap Screw SUS304
20 Set Screw SUS304 (125A/200A, for fixing handle)
● Boundary Dimension
● F100NB (Full Port)
unit: mm
Stainless Cast Steel,
Lever Operated Gear Operated approx. Mass (kg)
Cast Steel, Ductile Cast Iron
DN d L L1 E H1 G F E1
Lever Operated Gear Operated
10K 20K 10K 20K H 10K 20K 10K 20K 10K 20K 10K 20K 10K 20K 10K 20K 10K 20K
CL150 CL300 CL150 CL300 CL150 CL300 CL150 CL300 CL150 CL300 CL150 CL300 CL150 CL300 CL150 CL300 CL150 CL300
1 5 13 108 140 45 63 80 − − − − − − − − 1.9 2.3 − −
130 130
2 0 19 117 152 50 70 85 − − − − − − − − 2.5 3.0 − −
2 5 25 127 165 51 71 100 160 160 − − − − − − − − 4.0 4.7 − −
4 0 38 165 190 70.5 76.5 115 − − − − − − − − 6.5 7.3 − −
230 230
5 0 51 178 216 80.5 86 120 − − − − − − − − 8.5 10.1 − −
6 5 64 190 241 87 103 135 − − − − − − − − 13.5 17.0 − −
350 350
8 0 76 203 283 97 124 145 − − − − − − − − 16.5 23.0 − −
1 0 0 102 229 305 116 135 180 450 450 280 285 165 190 62.5 77 240 300 27 38.5 41 57.5
1 2 5 127 356 381 148 158 260 342 342 46 59 73 92
650 800 190 230 77 90.5 300
1 5 0 152 394 403 173 178 280 362 362 460 61 75 88 108
2 0 0 203 457 502 207 235 350 800 1100 425 446 230 260 90.5 121 460 98 123 135 174
– 7 –
Manual Ball Valves
● Pressure-Temperature Range
● Valves: F100NB, E100JNC, E300NB-L2, EK100N (Trunnion)
DN15 to 25 DN40 to 65
6.0 6.0
5.0 5.0
Pressure (MPa)
Pressure (MPa)
4.0 4.0
3.0 3.0
2.0 2.0
1.0 1.0
0 0
0 40 80 120 160 200 240 0 40 80 120 160 200 240
5.0 5.0
Pressure (MPa)
Pressure (MPa)
4.0 4.0
3.0 3.0
2.0 2.0
1.0 1.0
0 0
0 40 80 120 160 200 240 0 40 80 120 160 200 240
5.0 5.0
Pressure (MPa)
Pressure (MPa)
4.0 4.0
3.0 3.0
2.0 2.0
1.0 1.0
0 0
0 40 80 120 160 200 240 0 40 80 120 160 200 240
– 8 –
■ Jacketed Ball Valve (E100JNC)
● Standard Specification
● Nominal Size: Full Port, DN15 to 200
● Connection: Flange
JIS10KRF, 20KRF
ANSI CL150RF, CL300RF
The flange size is slightly larger than the valve Nominal Size.
(Please see the boundary dimension table.)
● Body Material: Stainless Steel (SCS14A, SCS16A)
● Parts Materials: Please see the standard configuration table.
● Jacket: Allowable Pressure 1 MPa Inlet 2-Rp (pipe thread)
Allowable Temperature 250ºC Outlet (Bottom Plug) 1-Rp (pipe thread)
● Please contact us for customer specific valves.
1F 4 3 S1
● Boundary Dimension
unit: mm
Lever Operated Gear Operated approx. Mass (kg)
Connection
Flange Lever Gear
DN d L L1 R J Rp Operated Operated
H1 H2 E H3 E1 F Nominal
Size 10K 10K
CL150 CL150
1 5 13 108 54 − 130 − 130 − − − 5.2 −
78 40
2 0 19 117 58.5 − 134 − 130 − − − 5.5 −
2 5 25 127 63.5 − 86 142 − 160 − − − 50 6.8 −
4 0 38 165 82.5 60 99 160 − 230 − − − 65 11.2 −
1/2
5 0 51 178 93 105 169 − 230 − − − 80 13.3 −
65
6 5 64 190 100 118 − 188 350 − − − 100 20 −
8 0 76 203 108 70 131 − 199 350 − − − 125 27 −
1 0 0 102 229 119 75 148 − 210 450 314 240 62.5 150 43 57
1 2 5 127 267 80 176 − 302 650 387 200 67 94
152 300 77
1 5 0 152 292 85 202 3/4 − 322 650 407 250 98 125
2 0 0 203 330 165 90 243 − 390 800 471 460 90.5 350 162 199
– 9 –
Manual Ball Valves
L port
L2 L3 L4
T port
T3 T4
● Changeover Form
● Right diagram shows standard changeover of L shaped port. Changeover Form
Because L2 model has no seat on the middle port, Top View (View from Actuator)
the pocket can be clogged up by a fluid with solids.
In such case, please use L4 or L3 model.
Please choose position ① or position ② as shut down position for
a double acting port with solenoid valve.
Even if non-solenoid valve is installed, please choose position ① or
position ② as air leakage position for a single acting port.
● Regarding to T port, you can specify its form from the following positions (rotated 90 degrees each.)
Please choose shut down position for a double acting port with a solenoid valve, and air leakage positions for a
single acting port.
– 10 –
■ 3-Way Ball Valve (E300NB)
● 3-Way 2-Seats Ball valve (E300NB-L2)
A valve with L shaped port. This valve is used for switching fluid only.
● Standard Configuration
18A 18
Materials
15A 16 19 No. Parts
Ductile Cast Iron Stainless Cast Steel
1 Body FCD400 SCS13A SCS14A
2 Cap FCD400 SCS13A SCS14A
3 Ball SUS304 or SCS13A SUS316 or SCS14A
4 Seat New-PTFE
7 Stem SUS304 SUS316
8 Gasket New-PTFE
12 Packing New-PTFE
12A Bearing New-PTFE
7 15C 12
12B Thrust Washer New-PTFE
17 15A Gland Flange SCS13A
17B
12A 15B Gland SUS304
15B
12B
15C Bearing New-PTFE
16 Travel Stop SUS304
SCPH2 (DN15 to 100)
17 Handle
SCPH2 + STK490 (DN125 to 200)
17B Retaining Ring SUS304
18 Stud Bolt SNB7 SUS304
18A Nut S45C SUS303
1 3 8 4 2
19 Cap Screw SUS304
20 Set Screw SUS304 (DN125 to 200, for fixing handle)
This configuration may change
according to the Nominal Size.
● Production Range (Nominal Size: 15A/200A)
Materials Class
FCD400, SCS13A J10K
SCS14A J10K, CL150
● Boundary Dimension
– 11 –
Manual Ball Valves
● Boundary Dimension
unit: mm
approx.
Mass (kg)
DN d L1 L2 H E
Stainless Cast Steel
J10K
1 5 3.7
19 140 70 95 160
2 0 4.2
2 5 25 160 80 105 6.6
230
4 0 38 180 90 119 9.0
5 0 51 200 100 129 13.7
350
6 5 64 240 120 140 19.5
8 0 76 260 130 167 28.0
450
1 0 0 102 330 165 182 35.0
– 12 –
■ 3-Way Ball Valve (E300N)
● 3-Way 3-Seats Ball Valve (E300N-L3/T3)
A fixed ball valve with T shaped port. Also, L shaped port type can be provided.
This valve is used for switching, spliting, or mixing fluids.
○ Standard Configuration
Materials
No. Parts
Ductile Cast Iron Stainless Cast Steel
1 Body FCD-S SCS13 SCS14 SCS16
1B Cover FCD-S SCS13 SCS14 SCS16
2 Flange FCD-S SCS13 SCS14 SCS16
3 Ball SCS13 SCS14 SCS16
4 Seat New-PTFE
4A Spacer SUS304 SUS316 SUS316L
4B Spring SUS304 SUS316 SUS316L
4C O-Ring NBR a FKM s
7 Stem SUS420J2 SUS304 SUS316 SUS316L
7A Key SUS304 SUS316 SUS316L
8 Gasket PTFE
8A Gasket PTFE
9A Bearing PTFE
9B Thrust Washer PTFE
12 Packing PTFE
12A Bearing PTFE
12B Thrust Washer PTFE
12C Washer SUS304 SUS316 SUS316L
15A Gland Flange FCD400 SCS13
15B Gland SUS304
16 Travel Stop SUS304
17 Handle FCD400 + STK50
17B Retaining Ring SUS304
18 Stud Bolt/Nut SS400 SUS304
18C Bolt SS400 SUS304
19 Cap Screw S45C SUS304
20 Set Screw S45C
21 Port Indicator SUS304
● Boundary Dimension
unit: mm
approx. Mass (kg)
DN d L1 L2 H E H1 G E1
Lever Operated Gear Operated
1 2 5 127 430 215 260 340 650 81 110
230
1 5 0 152 500 250 275 352 800 460 104 132
2 0 0 203 650 325 335 434 1100 260 177 226
– 13 –
Manual Ball Valves
19
15A 15B
12
FLOW
3
2
1
4 9 11
– 14 –
■ Tough Seal Type V Port Valve (V100ND)
● Application Features
● Pocketless Structure
The seat is provided only on one surface of the primary side, so fluid does not collect in the flow passage of the
valve or get stuck between the ball and the valve body. Accordingly, this type of valve is suitable for lines with
highly viscous fluids or fluids that include sludge and fibrous content and the like. In addition, there is no abnormal
rise in pressure as in the case of ordinary ball valves, so there is no damage to the ball, seat or other parts due to
abnormal pressure increases.
● Tough Seal
The use of a metal seat enables the valve to be used in high temperature environments, and the seat has sufficient
rigidity and flexibility to provide sealing in pressures ranging from vacuum to high pressure, without being affected
by differences in temperature and pressure.
The valve is also wear-resistant with respect to fluids containing slurry, powder and other wear-inducing
substances.
● Full Flow
When the valve is fully open, the flow passage is almost straight, reducing pressure loss and ensuring a large
capacity flow.
● Shearing Action
The V-shaped cut on the ball shuts out fibrous material, solids and so on, making the valve suitable for use on
paper and pulp factory lines.
● Precision Control
The V-shaped cut on the ball increases rangeability and enhances flowrate control performance as compared to
ball, diaphragm or butterfly valves.
In addition, the inherent flow characteristics are approximately equal percent characteristics.
● Configuration Features
● Integrated Body
The valve body is an all-in-one body, so there are no fluctuations in valve torque due to pipe stress and no drop in
sealing performance or external leakage.
The face-to-face specifications are in accordance with ISO 5752.
● Flexible Seat
1) Centripetal Type Seat
All three types of seat—solid, thin and soft—are provided with a clearance C for the inner diameter of the body
and the outer diameter of the seat.
Accordingly, providing a seat on the spherical surface creates a centripetal seal surface for the seat and ensures
uniform contacting.
– 15 –
Manual Ball Valves
19
15A 15B
3
2
1
4 9 11
– 16 –
■ Tough Seal Type V Port Valve (V100ND)
3) Seat Compatibility
The solid seat, thin seat and soft seat are compatible with one another.
● Precision Ball
The ball is a precision ball manufactured using the lost wax method. The sealing surface is coated with Nickel
based self-fluxing alloy or polished with a #400 Buffing.
The Nickel based self-fluxing alloy coated sealing surface is precision-lapped.
● Full Flow
When the valve is fully open, the ball is almost entirely hidden on the outside of the flow path, preventing fluid
blockage and cavitation and allowing slurry and the like to pass smoothly.
This reduces operational torque and enables the bearings to cope Packing
with very frequent valve action.
Washer
Thrust washer
● Standard Specification
Items Specification
Applicable Nominal Size DN25 to 200 (Please contact us about DN20)
Prssure Class JIS10K, JIS20K, Class150
Connection Flange JIS10KRF, JIS20KRF, Class150RF
Face-to-Face Dimension ISO 5752
Allowable Pressure Range 1.33 Pa to 3.4 MPa
Allowable Temperatre Range -20 to 250°C
Body
Insert
Part
– 17 –
Manual Ball Valves
M ………………… ②
ST ………………… ③
Pressure (MPa)
Pressure (MPa)
Temperature (°C) Temperature (°C)
DN80 to 100 DN125 to 200
Pressure (MPa)
Pressure (MPa)
● Boundary Dimension
V100ND VG100ND
unit: mm
Lever Operated Gear Operated approx. Mass (kg)
L L1
E H G F E1 Lever Operated Gear Operated
DN d H1
10K 10K H 10K 10K 10K 10K 10K 10K 10K,
20K 20K 20K 20K 20K 20K 20K 20K 20K
CL150 CL150 CL150 CL150 CL150 CL150 CL150 CL150 CL150
2 5 25 127 165 72 110 48 108 160 3.8 5
4 0 38 165 190 95 120 71 135 6.8 8.5
230
5 0 51 178 216 103 141 77 140 − − − − − − − − 8.1 10.5 − −
6 5 64 190 241 110 161 96 163 13 15.5
350
8 0 76 203 283 113 193 101 168 14 17
1 0 0 102 229 305 123 199 131 209 450 311 316 165 190 62.5 77 240 300 21 26.5 38 49
1 2 5 127 356 381 211 236 163 305 384 44 50 77 81
650 800 190 230 77.0 90.5 300
1 5 0 152 394 403 244 253 173 315 394 460 54 64 89 95
2 0 0 203 457 502 257 302 211 381 800 1100 457 475 230 260 90.5 121 460 86 98 135 150
– 18 –
■ Tough Seal Type V Port Valve (V100ND)
● Allowable Seat Leakage Amount
Category Reference value Description
ANSI B16, 104 — Rank II
Solid Seat (St) Rated Cv: less than 0.5 %
and IEC534-4 — Rank II Compliant
ANSI B16, E104 — 1/20of Rank IV
Thin Seat (M) Rated Cv: less than 0.0005 %
and IEC534-4 — Rank IV-S1 Compliant
Note: We can provide another type of solid seat which leaks less than 0.002 %.
DN Cv D x DN Cv D x DN Cv D x DN Cv
25 28 40 × 25 23 50 × 25 21 65 × 25 20
40 75 50 × 40 68 65 × 40 60 80 × 40 55
50 153 65 × 50 127 80 × 50 110 100 × 50 95
65 250 80 × 65 218 100 × 65 185 125 × 65 165
80 350 100 × 80 312 125 × 80 270 150 × 80 245
100 540 125 × 100 480 150 × 100 430 200 × 100 360
125 930 150 × 125 835 200 × 125 675 250 × 125 575
150 1,320 200 × 150 1,110 250 × 150 950 300 × 150 830
200 2,000 250 × 200 1,800 300 × 200 1,620 350 × 200 1,500
3 1.2
G 4 1.4
Viscous Fluid Cv = 11.56V・R・
(P1 – P2)
5 1.9
P1 Q G (273 + t)
△P< Cv = V: Max Flow (m3/hr)
2 2.93 △ P (P1 + P2)
Gas
P1 WK △ P: P1 – P2 (kPa)
△P< Cv =
2 0.1391 △ P (P1 + P2) R: Viscosity Correction Factor
Steam
t: Temperature (°C)
P1 WK
△P≧ Cv = Q: Max Flow (15.6°C, 101.3 kPa · A)
2 0.1205P1
W: Max Flow (kg/hr)
Note: 1. Viscosity correction factor R is applied when the fluid is less than 20cSt. K: 1+ (0.0013 x Superheat °C)
2. Pulp concentration correction can be calulated by mutiplying Cv value with K1.
(Please use viscous fluid formula.)
Superheat = t – t1
Where “t” is saturation temperature
relative to primary absolute pressure
“P1,” and “t1” is primary temperature.
For saturated steam, assumes that
superheat becomes 0.
– 19 –
Pneumatic Auto Valves
■ Air Consumption
Air consumption shows amount of multiplication air which are necessary for one round trip of cylinder’s operation.
The more operation times increases, the more air consumption increases.
– 20 –
■ Torque Actuator
● Standard Specificaation
● Operating Style: Double Acting, Single Acting (Reverse Acting, Direct Acting)
● Usage Pressure: 0.4 MPa (MAX 0.7 MPa)
● Rotation Limit: 0° to 90° (Part-Turn)
● Manual operation: Manual open-close device can be installed.
To operate double acting type using a lever, you can
choose to set up a bypass between OPEN and CLOSE
air chambers, or to release air.
Standard Configuration: Please see the materials teble.
● Actuator Ambient Temperature: -10°C to 50°C
● Installation: Free direction, but in case of mounting air filter, drain outlet
of it should always turn to ground.
● Accesories (Optional): Valve Positioner, Solenoid Valve, Air Devices, Limit Switch.
● Open-Close Time Controller (Optional): We will set up the speed controller
according to your needs.
● Coating (Body): Platinum Silver (if stainless body, no coating)
(Actuator): Platinum Silver
● Configuration
– 21 –
Pneumatic Auto Valves
● Valve Type
Double Acting: EKPN1100N-250/350 (Trunnion ball)
Single Acting: EKPO1100N-250/350 (Trunnion ball)
Pressure: 0.4 MPa
Double Acting Single Acting
DN Rank Shutoff Differentioal Pressure: MPa Shutoff Differentioal Pressure: MPa Rank DN
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
A PO-22D A
250 B PN-18D B 250
C C
A A
300 B B 300
C PN-22D 25D PO-25D ― ― ― C
A ― ― A
350 B ― ― ― ― B 350
C PN-25D ― ― ― ― ― ― ― ― ― ― C
– 22 –
● Boundary Dimension
○ FPN1100NB (Double Acting, Full Port)
unit: mm
L approx.
Stainless Cast Steel Mass (kg)
Cast Steel Actuator
DN d B B1 B2 H Stainless Cast Steel
Ductile Cast Iron Code
10K, 20K, 10K, 20K,
CL150 CL300 CL150 CL300
1 5 13 108 140 PN-04D 169 3.0 3.4
144
2 0 19 117 152 PN-04D 173 3.6 4.1
PN-05D 172 185 4.0 4.5
2 5 25 127 165 PN-04D 144 187 5.0 5.7
PN-05D 172 199 5.5 6.2
4 0 38 165 190 PN-05D 217 8.9 9.7
PN-06D 214 233 9.9 10.7
5 0 51 178 216 PN-06D 241 11.8 13.4
PN-08D 266 262 15.8 17.4
6 5 64 190 241 PN-06D 214 269 17.3 20.8
FPN1100NB PN-08D 266 290 19.8 23.3
8 0 76 PN-10D 336 B/2 B/2 300 22.9 29.4
203 283
PN-12D 420 346 28.6 35.1
1 0 0 102 229 305 PN-10D 336 381 39 50.5
PN-12D 420 411 49 60.5
1 2 5 127 356 381 PN-12D 450 69.5 82.5
PN-13D 644 505 86 99
PN-12D 420 470 84.5 98.5
1 5 0 152 394 403 PN-13D 644 525 101 115
PN-18D 758 596 138 152
PN-13D 644 579 143 168
2 0 0 203 457 502 PN-18D 758 641 180 205
PN-22D 988 752 260 285
FPN1100NB
– 23 –
Pneumatic Auto Valves
H
H
H
φd
φd
φd
φd
Rp Rp Rp Rp
k k k k
L k k L k k
L L
Flange approx.
Actuator Mass (kg)
DN d L k Rp Nominal B B1 B2 H
Code
Size 10K, CL150
1 5 13 108 − PN-04D 144 217 6.4
40 221 6.6
2 0 19 117 −
PN-05D 172 233 7.0
PN-04D 144 232 7.8
2 5 25 127 − 50
PN-05D 172 244 8.3
4 0 38 263 13.6
165 60 65
PN-06D 214 279 14.6
1/2 288 16.5
5 0 51 178 80
PN-08D 266 309 20.5
65
PN-06D 214 324 23.8
6 5 64 190 100
PN-08D 266 345 26.3
B/2 B/2
8 0 355 33.4
76 203 70 125
PN-10D 336 399 39.1
412 55.0
1 0 0 102 229 75 150
PN-12D 420 445 65.0
200 495 90.5
1 2 5 127 267 80
PN-13D 644 550 107
PN-12D 420 515 121.5
1 5 0 152 292 85 3/4 250 PN-13D 644 570 138
PN-18D 758 641 175
PN-13D 644 625 207
2 0 0 203 330 90 350
PN-18D 758 687 244
Flange approx.
Actuator Mass (kg)
DN d L k Rp Nominal B B1 B2 H
Code
Size 10K, CL150
1 5 108 − PO-04D 238 217 6.9
13 229 7.8
40 PO-05D 300
2 0 19 117 − 233 8.2
PO-06D 350 249 9.7
2 5 25 127 − 50 260 11.1
4 0 38 165 60 65 301 20.1
PO-08D 434
1/2 B/2 B/2 309 22.0
5 0 51 178 80
65 PO-10D 552 355 30.7
6 5 64 190 100 391 39.5
PO-12D 700 422 51.5
PO-10D 552 401 46.6
8 0 76 203 70 125
PO-12D 700 432 58.6
1 0 0 102 229 75 445 75.5
150
PO-13D 869 500 113
547 322
550 139
1 2 5 127 267 80 200
3/4 PO-18D 1013 634 379 621 199
PO-13D 869 547 322 570 170
1 5 0 152 292 85 250
PO-18D 1013 634 379 641 230
2 0 0 203 330 90 350 687 299
– 24 –
■ 3-Way Ball Valve
● Actuator Selection Table
● Valve Type
Double Acting: EPN1300NB-L2-15/200
Single Acting: EPO1300NB-L2-15/200
Pressure: 0.4 MPa
Double Acting Single Acting
DN Rank Shutoff Differentioal Pressure: MPa Shutoff Differentioal Pressure: MPa Rank DN
0.2 0.4 0.6 0.8 1.0 0.2 0.4 0.6 0.8 1.0
A A
PO-04D
15 B B 15
C C
A PN-04D PO-05D A
20 B B 20
C C
A A
PO-06D
25 B B 25
C PN-05D C
A A
40 B B 40
C PO-08D C
PN-06D
A A
50 B B 50
C PN-08D C
A PN-06D A
65 B B 65
C PO-10D C
PN-08D
A A
80 B B 80
C C
A PN-10D PO-12D A
100 B B 100
C C
A A
125 B PO-13D B 125
PN-12D
C C
A A
150 B B 150
C C
PN-13D PO-18D
A A
200 B B 200
PN-18D
C PO-22D C
● Valve Type
Double Acting: EPN1300NB-T4(L4)-15/100, EPN1300N-T3(L3)-125/200
Single Acting: EPO1300NB-T4(L4)-15/100, EPO1300N-T3(L3)-125/200
Pressure: 0.4 MPa
Double Acting Single Acting
DN Rank Shutoff Differentioal Pressure: MPa Shutoff Differentioal Pressure: MPa Rank DN
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
A PN-04D A
15 B B 15
PN-05D
C C
A PN-04D A
PO-06D
20 B B 20
C C
PN-05D
A A
25 B B 25
C C
A PN-06D PO-08D A
40 B B 40
C C
A PO-10D A
50 B PN-08D B 50
C PN-10D C
A A
65 B B 65
PO-12D
C C
A A
PN-10D
80 B B 80
C C
A A
100 B PO-13D B 100
PN-12D
C PN-13D PO-18D C
A ― ― ― ― ― ― ― ― ― ― A
125 B ― ― ― ― ― ― ― ― ― ― B 125
C PN-13D ― ― ― ― ― ― ― ― ― ― C
A ― ― ― ― ― PO-18D ― ― ― ― ― A
150 B ― ― ― ― ― ― ― ― ― ― B 150
C ― ― ― ― ― ― ― ― ― ― C
A PN-18D ― ― ― ― ― ― ― ― ― ― A
PO-22D
200 B ― ― ― ― ― ― ― ― ― ― B 200
C PN-22D ― ― ― ― ― PO-25D ― ― ― ― ― C
– 25 –
Pneumatic Auto Valves
approx.
Actuator Mass (kg)
DN d L1 L2 B B1 B2 H
Code
Stenless Cast Steel
1 5 13 146 73 169 4
PN-04D 144
2 0 19 150 75 173 4.7
PN-05D 172 185 5.1
2 5 25 PN-04D 144 187 6.6
170 85
PN-05D 172 199 7.1
4 0 38 200 100 217 11.2
PN-06D 214 233 12.2
5 0 51 230 115 241 15
PN-08D 266 262 19
6 5 64 PN-06D 214 269 22.8
260 130
PN-08D 266 B/2 B/2 290 25.3
8 0 76 280 140 300 29.4
PN-10D 336 346 35.1
1 0 0 102 340 170 381 48
PN-12D 420 411 58
1 2 5 127 370 185 450 83.5
PN-13D 644 505 100
PN-12D 420 470 102.5
1 5 0 152 430 215 PN-13D 644 525 119
PN-18D 758 596 156
2 0 0 203 PN-13D 644 579 185
520 260
PN-18D 758 641 222
unit: mm
approx.
Actuator Mass (kg)
DN d L1 L2 B B1 B2 H
Code
Stenless Cast Steel
1 5 13 146 73 PO-04D 238 169 4.5
PO-05D 300 181 5.4
2 0 19 150 75 185 6.3
PO-06D 350 201 7.8
2 5 25 170 85 215 9.9
4 0 38 200 100 254 17.7
PO-08D 434
B/2 B/2 262 20.5
5 0 51 230 115
PO-10D 552 308 29.2
6 5 64 260 130 336 38.5
PO-12D 700 367 50.5
PO-10D 552 346 42.6
8 0 76 280 140
PO-12D 700 377 54.6
1 0 0 102 340 170 411 68.5
PO-13D 869 466 106
547 322
1 2 5 127 370 185 505 132
PO-18D 1013 634 379 576 192
1 5 0 152 430 215 PO-13D 869 547 322 525 151
596 211
PO-18D 1013 634 379
2 0 0 203 520 260 641 277
– 26 –
■ 3-Way Ball Valve
● Boundary Dimension
● Valve Type: EPN1300NB-L4/T4-15A/100A (Double Acting)
EPN1300N-L3/T3-125A/200A (Double Acting)
unit: mm
approx.
Mass (kg)
Actuator
DN d L1 L2 B B1 B2 H
Code Stenless Cast Steel
10K,
20K
CL150
EPN1300N-T3
approx.
Mass (kg)
Actuator
DN d L1 L2 B B1 B2 H
Code Stenless Cast Steel
10K,
20K
CL150
1 5 8 8.6
19 140 70 214
2 0 PO-06D 350 8.5 9
2 5 25 160 80 226 11.2 12
PO-08D 434 247 15.5 16.3
4 0 38 180 90 B/2 B/2 261 17.9 20.1
PO-10D 552 307 26.5 28.7
5 0 332 33.3 34.6
51 200 100
363 45.3 46.6
6 5 64 240 120 PO-12D 700 374 51.5 55
8 0 400 60.5 65.5
76 260 130
PO-13D 869 547 322 455 98 103
470 105 119
EPO1300NB-T4 1 0 0 102 330 165 634 379
PO-18D 1013 525 − 182
PO-13D 869 547 322 502 151 −
1 2 5 127 430 215
PO-18D 1013 634 379 574 211 −
1 5 0 152 500 250 586 238 −
PO-22D 1272 778 494 717 − −
2 0 0 203 650 325 759 − −
PO-25D 1671 1036 635 820 − −
– 27 –
Pneumatic Auto Valves
● Valve Type
Single Acting: VPO1100ND-25/200
Pressure: 0.4 MPa
Single Acting
DN Rank Shutoff Differentioal Pressure: MPa Rank DN
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
A PO-05D A
25 B B 25
C PO-06D PO-08D C
A A
40 B B 40
C PO-10D C
PO-08D
A A
50 B B 50
C PO-10D C
A PO-08D PO-10D A
65 B B 65
C PO-12D C
PO-10D
A A
80 B B 80
C PO-13D C
A PO-10D PO-12D A
100 B B 100
C C
A A
125 B B 125
PO-13D
C PO-18D C
A A
150 B B 150
C PO-22D C
A PO-18D A
200 B B 200
C PO-22D C
– 28 –
■ Tough Seal Type V Port Valve
● Boundary Dimension
● Valve Type: VPN1100ND (Double Acting)
unit: mm
243 9.3 11
4 0 38 165 70 190 70 71 PN-06D 214 259 10.3 12
PN-08D 266 280 13.8 15.5
5 0 51 PN-06D 214 264 11.6 14
FLOW 178 75 216 75 77
φd
FLOW
φd
H1
L1
L
VPN1100ND
PN13D to 18D
FLOW
φd
H1
L1
L
VPO1100ND
PO13D to 18D
– 29 –
Pneumatic Auto Valves
■ Accesories
● Limit Switch
Guard Type Rain Proof (Box with Built-In) Explosion Proof Rain Proof Explosion Proof
Applicable Actuator 04D · 05D 06D · 08D 10D · 12D 04D to 12D 13D, 18D, 22D, 25D
In-House Code LS1A LS1B LS20 ー ー ー
Manufacturer Code V-5114E 1LX5001 1LS19-J 1LX5001
AC 16A-125, 250V 5A-125, 250V 10A-125, 250, 480V 5A-125, 250V
Rated Voltage 0.6A-115V 0.8A-125V 0.4A-125V
DC
0.3A-230V 0.4A-250V 0.2A-250V
Manufacturer Yamatake Corporation
● Solenoid Valve
Guard Type Drip Proof Rain Proof Explosion Proof Drip Proof Rain Proof Explosion Proof
Applicable Actuator 04D to 12D 13D, 18D, 22D, 25D
In-House Code ES1 ES20 ES30 — — —
Manufacturer Code VF3190 VF3190A 50-VF3190A 4F310-08,10 4F310-08,10-B 4F310E-08,10
Rated Voltage AC100/110V · 50/60Hz, 200/220V · 50/60Hz AC100/110V · 50/60Hz, 200/220V · 50/60Hz
Joint Size Rc1/4 13D: Rc1/4 · 18D to 25D: Rc3/8
Effective Section Area 13.5mm2 13D: 25mm2 · 18D to 25D: 32mm2
Manufacturer SMC CKD
● Positioner
Input-Output Pneumatic – Pneumatic Electric – Pneumatic (Explosion Proof)
Manufacturer Code NP22 NE22
Joint Size Rc1/4
Supply Pressure 0.4 to 0.7 MPa
Signal 20 to 100 kPa 4 to 20mmA DC
Linearity Within ± 1.5%F.S
Hysteresis Within 1%F.S
15NR/min 13NR/min
Air Consumption
(assumes 0.4 MPa as supply pressure) (assumes 0.4 MPa as supply pressure)
Note Actuator 04D to 06D equip speedcontroller as default
● Speed Controler
Applicable Actuator 04D to 12D 04D to 13D 18D, 22D, 25D
Manufacturer Code ASN2-01 AS2200-02 AS2000-02 AS4000-03
Allowable Pressure 0 to 0.99 MPa 0.1 to 0.7 MPa 0.05 to 0.99 MPa 0.05 to 0.99 MPa
Joint Size Rc1/4 Rc3/8
Manufacturer SMC
Directly attach to Directly attach to the Not for ES1 to ES30.
Note ES1 to ES30 valves except ES1 to For intake throttle with —
Only for Exhaust Throttle ES30, and Positioner PO/PC.
– 30 –
MEMO
– 31 –
Electric Ball Valves
● Comparatively lightweight, compact drive section using aluminum alloy and engineering plastic
● Can only accommodate single-phase AC power
● No built-in torque switch
● Motor is protected by a built-in thermal protector
● Can be operated manually using a hexagonal wrench, but has no built-in interlock switch
● Can be used as a regulating valve through the attachment of a Seitroller (Electric positioner) and potentiometer
● Model SHA and SD# (SEIBU ELECTRIC & MACHINERY CO., LTD.)
● Sturdy drive section made up of primary and secondary reduction gear of Ductile Cast Iron
● Can accommodate three-phase AC power
● Built-in torque switch protects the motor and also prevents damage caused by excessive valve torque;
a thermal relay should be used on the panel side to ensure that motor is protected completely
● Two types of manual-solenoid switching models available: a site priority model and a central control priority mode
● Built-in interlock switch provided only on site priority models
● Many other optional specifications available, including single-phase motor model, DC motor model, regulating valve
model and so on.
When selecting the type of drive section, make your selection from the features listed above, the valve aperture diameter,
the valve material, the Specification Actuator listed on page 32, and the Actuator Selection Table on pages 35–45.
– 32 –
■ Actuator Specification
● SRH Torque Actuator
Type SRH-007 SRH-020 SRH-060
Max Toqrue N · m 68.6 196 588
Open-Close time (Sec/90°) 50/60Hz 12/10 12/10 18/15
Power (V) Single-phase 100/110, 200/220
Output Power (W) 10 40 100
Motor
Insusation Type E
Thermal Protector Implemented
Torque Limit Switch Not Implemented
Space Heater (W) 8
Contact Capacity AC250V 5A/DC125V 0.4A (Dielectric Load)
Lead Connection 2-G1/2
Ambient Temperature -10°C to 50°C
Apparatus for Protection IP55/JPW55 (Rein Proof)
Terminal Screw Size M3.5 x 12P
Manual Operation Manual Operation by using Hexagonal Wrench
Options: • Electrical Control Device: Potentiometer, Seimitter, Seitroller
Insusation Type B
Brake Permanent Brake
Thermal Protector Built-in Motor
Torque Limit Switch Implemented
Space Heater (W) 5 to 8
Contact Capacity AC250V 2A/DC125V 0.4A (Dielectric Load)
Lead Connection 3-G1
Ambient Temperature -10°C to 50°C
Apparatus for Protection IP68 (Available use for Underwater)
Terminal Screw Size M4 x 32P, Motor M4 x 3P
Manual Operation Automatic Return, with Manual Handle
Options: • Protection of Electrical Apparatus: Flameproof Enclosure (Exd II BT4) • Electrical Control Device: Potentiometer, Seimitter, Seitroller
✽ ①: SRJ-1, 2 is impossible of use by single-phase three-wire.
Insusation Type E
Brake Mechanical Brake
Torque Limit Switch Not Implemented
Space Heater (W) Semi-Complient (10W)
Lead Connection 1-G1/2 2-G3/4
Ambient Temperature -10°C to 50°C
Apparatus for Protection Drip Proof (corresponding to IP54)
Terminal Standard: Screw Size M3 x 8P
Manual Operation Actuator's bottom axis can be manipulated
Options: • Electric to Electric Positioner, Potentiometer, Middle Switch, Space Heater, DC Power
– 33 –
Electric Ball Valves
■ Internal Circuit
● SRH
Rotation Direction
Clockwise rotation at ① and ③
Counterclockwise rotation at ① and ④
The direction is based on the sight from the actuator
toward valve.
Legends
RLS1: Clockwise Rotation Limt Switch (closed)
RLS2: Clockwise Rotation Limt Switch (closed)
LLS1: Counterclockwise Rotation Limt Switch (opened)
LLS2: Counterclockwise Rotation Limt Switch (opened)
M: Motor TH: Themal Protector
H: Heater C: Condenser
POT: Potentiometer (option)
● SRJ
Terminal Counter- Clockwise 13 – 14: ON=Overtoque at Clockwise End Stop
clockwise End
Switch No. End 1 – 4: OFF=Overtoque at Clockwise End Stop
RLS 1 1–4 17 – 18: ON=Overtoque at Counterclockwise End Stop
RLS 1 5–6
1 – 8: OFF=Overtoque at Counterclockwise End Stop
RLS 1 1–8
RLS 1 9 –10
31 – 32: Heater Power Terminal
: ON : OFF
27, 28, 29: Terminals of Ptentionmeter
Rotation Direction
Clockwise Rotation at:
Single-Phase: R-U, T-X 3-Phase: R-W, S-V, T-U
Counterclockwise Rotation at:
Single-Phase: R-V, T-X 3-Phase: R-U, S-V, T-E
The direction is based on the sight from the actuator toward valve.
Legends
RLS1, RLS2: Clockwise Rotation Limt Switch
Clockwise LLS1, LLS2: Counterclockwise Rotation Limit Switch
RTS1, RTS2: Clockwise Rotation Torque Switch
LTS1, LTS2: Counterclockwise Rotation Torque Switch
Counterclockwise M: Motor TH: Themal Protector H: Heater
C: Condenser POT: Potentiometer (option)
● PMK
T1 – T3: Counterclockwise rotated when turnng on, stopped when both switches are opened.
T2 – T3: Clockwise rotated when turnng on, stopped when both switches are closed.
Open signal will be submitted at pre-defined stop position of LS1.
Close signal will be submitted at pre-defined stop position of LS2.
M: Motor
C: Condenser
TP: Thermal Protector
– 34 –
■ 2-Way Ball Valve
● FSR4100NB (SRH Actuator)
● Actuator Selection Table
Shutoff Differential Pressure (MPa)
DN Rank
1.0 2.0 3.0
A
15 B
C
A
20 B
C
A SRH-007
25 B
C
A
40 B
C
A
50 B
C
A SRH-007
65 B
C SRH-020
A
80 B
C
A
100 B
C
A ―
125 B SRH-060 ―
C ― ―
A ―
150 B ― ― ―
C ― ― ― ― ― ―
● Boundary Dimension
A B E J
● Boundary Dimension
W
3-G1
H
AC connector
φd
L1
L
Please contact us about mounting position of the Actuator.
unit: mm
● Boundary Dimension
unit: mm
● Boundary Dimension
unit: mm
– 38 –
■ 2-Way Ball Valve
● FPMK4100NB (PMK Actuator)
● Actuator Selection Table
● Boundary Dimension
unit: mm
● Boundary Dimension
unit: mm
Actuator L2 T4 (L4) & T3 (L3)
DN approx. approx.
Code A B C D d L L1 H d L L1 H
Mass(kg) Mass(kg)
1 5 SRH-007 146 73 ─ ─ ─ ─ ─
19 220 10.5
2 0 SRH-007 150 75
25 160 80 235 13.0
2 5 SRH-007 100 108 75 60 25 170 85 235 13.0
4 0 SRH-007 38 200 100 250 17.0 38 180 90 259 17.5
SRH-007 260 22.0 284 23.5
5 0 51 230 115 51 200 100
SRH-020 121 135 90 63 280 26.5 304 27.5
SRH-007 100 108 75 60 290 30.0 314 30.0
6 5 64 260 130 64 240 120
SRH-020 310 34.0 335 34.0
121 135 90 63
SRH-020 320 39.0 334 40.5
8 0 76 280 140 76 260 130
SRH-060 158 164 133 85 ─ ─ 355 45.5
SRH-020 121 135 90 63 350 55.0 361 49.5
1 0 0 102 340 170 102 330 165
SRH-060 375 60.0 382 54.5
1 2 5 SRH-060 158 164 133 85 127 370 185 415 86.5 127 430 215 413 103
1 5 0 SRH-060 152 430 215 435 108 152 500 250 425 126
Note: The weight is based on stainless, JIS 10K.
– 40 –
■ 3-Way Ball Valve
● EMSJ4300NB-L2-15/150, EMSJ4300NB-T4 (L4) -15/100, EMSJ4300N-T3 (L3) -125/150
(SRJ Actuator)
● Actuator Selection Table
Valve Type L2 T4 (L4) & T3 (L3)
Shutoff Differential Pressure (MPa) Shutoff Differential Pressure (MPa)
DN Rank
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
A − − − − − − − − − −
15 B − − − − − − − − − −
C − − − − − − − − − −
A
20 B SRJ-010-7
C
A SRJ-010-7
25 B
C
A
40 B
C
A
50 B SRJ-010
C SRJ-010
A
65 B
C
A
80 B SRJ-020
C
A
100 B SRJ-020
C
A SRJ-060
125 B
C SRJ-060
A SRJ-1
150 B
C
A
200 B SRJ-1 SRJ-2
C SRJ-2
● Boundary Dimension
J E A B
W
H
φd
● Boundary Dimension
unit: mm
Actuator L2 T3 (L3)
DN approx. approx.
Code A B E F I d L L1 H d L L1 H
Mass(kg) Mass(kg)
125 SHA-02 127 370 185 657 145 127 430 215 655 165
SHA-02 677 165 185
150 152 430 215 152 500 250 667
SHA-04 100 113 453 140 260 ─ ─ 190
SHA-02 255
200 203 520 260 730 210 203 650 325 710
SHA-04 260
Note: The weight is based on stainless, JIS 10K.
– 42 –
■ 3-Way Ball Valve
● EPMK4300NB-L2-15/200, EPMK4300NB-T4 (L4) -15/100, EPMK4300N-T3 (L3) -125/200
(PMK Actuator)
● Actuator Selection Table
● Boundary Dimension
unit: mm
Actuator L2 T4 (L4) & T3 (L3)
DN approx. approx.
Code A B B1 d L L1 H Mass(kg) d L L1 H Mass(kg)
15 PMK-300YS 146 73 9.9 11.4
19 307 19 140 70
20 PMK-300YS 150 75 10.3 11.8
316
PMK-300YS 314 13.1 12.8
25 25 170 85 25 160 80
PMK-600YS ─ ─ 13
PMK-300YS 131 75.5 75.5 16.2 ─ ─
331
40 PMK-600YS 38 200 100 16.4 38 180 90 17
341
PMK-600YSP ─ ─ 17.1
PMK-600YS 19.8 ─ ─
340
50 PMK-600YSP 51 230 115 19.9 51 200 100 365 20.6
PMK-010SS 140 56 122 ─ ─ 422 23
PMK-600YS 26.9 ─ ─
131 75.5 75.5 370
PMK-600YSP 27 ─ ─
65 64 260 130 64 240 120
PMK-010SS 140 56 122 427 29.4 432 29.5
PMK-030SS 152 63 134 ─ ─ 466 32
PMK-010SS 140 56 122 437 33.9 455 35.5
80 76 280 140 76 260 130
PMK-030SS 152 63 134 ─ ─ 485 38
PMK-010SS 140 56 122 472 50 ─ ─
100 PMK-030SS 152 63 134 102 340 170 502 52.5 102 330 165 512 47
PMK-060SS 200 73 199 ─ ─ 634 65.5
PMK-030SS 152 63 134 538 77.5 ─ ─
125 PMK-060SS 127 370 185 660 95 127 430 215
200 73 199 658 111
PMK-080SS ─ ─
PMK-060SS
150 152 430 215 680 114 152 500 250 670 134
PMK-080SS
200 73 199
PMK-060SS
200 203 520 260 736 161 ─ ─ ─ ─ ─
PMK-080SS
Note: The weight is based on stainless, JIS 10K.
– 43 –
Electric Ball Valves
● Boundary Dimension
unit: mm
Actuator JIS10K, CL150 JIS20K approx. Mass (kg)
DN H1 H
Code A B C D d L L1 d L L1 CL150 CL300
2 5 SRH-007 48 248 25 127 72 25 165 110 9.5 10.5
4 0 SRH-007 100 108 75 60 71 276 38 165 95 38 190 120 13.0 14.5
SRH-007 283 14.5 16.0
5 0 77 51 178 103 51 216 141
SRH-020 121 135 90 63 303 0
20.0 21.5
SRH-007 100 108 75 60 314
6 5 96 64 190 110 64 241 161
SRH-020 121 135 90 63 334 23.5 25.0
SRH-007 100 108 75 60 319 21.0 23.0
8 0 SRH-020 121 135 90 63 101 339 76 203 113 76 283 193 25.5 27.0
SHR-060 158 164 133 85 364 32.0 33.5
SRH-020 121 135 90 63 375 43.0 36.5
1 0 0 131 102 229 123 102 305 199
SRH-060 400 40.0 43.5
1 2 5 SRH-060 158 164 133 85 163 451 127 356 211 127 381 236 64.5 70.5
1 5 0 SRH-060 173 461 152 394 244 152 403 253 75.5 84.5
Note: The weight is based on stainless, JIS 10K.
– 44 –
■ Tough Seal Type V Port Valve
● VMSJ4100ND (SRJ Actuator)
● Actuator Selection Table
● Boundary Dimension
B A
A B E J
φW
H
H
φd
φd
FLOW FLOW
H1
H1
L1
L1 L
L
● Major Applications
Type-Y ball valves are ideally suited for use with fluids containing powders, slurry or other highly wear-inducing fluids and
highly viscous fluids, or for cleaning the interior of pipes including valves, or to allow the passage of pigs or spheres in order to
avoid contamination from (mixing of) different fluid types.
● Features
5 O-Ring Seal
O-Rings are used at each seal, providing
stable sealing performance and eliminating
the need for periodic tightening.
7 Purge Holes
There are two plugs on the body.
Blowing charges of air into the pockets helps prevent powder from flowing in and also makes it possible to check for
leaks caused by seat wear as well as purge the powder remaining in the pockets and so on.
– 46 –
■ 3-Way Type-Y Ball Valve Specification
● Standard Specification
Items Specification
Nominal Size DN 25 to 300
Pressure Class JIS10K
Flange JIS10KRF, ANSI CL150
Allowable Pressure 1.4 MPa
Allowable Temperature 150°C
Body SCS13A, SCPH2*, FCD400*
Primary
Ball SCS13A, SCS13A + ENP
Parts
Seat Reinforced PTFE (CF), Semi-Metal Seat (SM), Metal Seat (ST)*
Manual Lever (below DN150), Gear (above DN200)
Operation
Automatic Pneumatic, Electric
✽: SCPH2, FCD400, and the metal seat are options.
8A
Silicon rubber DN25 to 100 12
5 Seat Spring S
SUS329J4L DN125 to 300
8 O-Ring NBR (FKM)*
8A O-Ring NBR (FKM)*
9A Pivot SUS304 DN200 to 300
9C 1 3
9B Thrust Washer Reinforced PTFE DN200 to 300
9C O-Ring NBR (FKM)* DN200 to 300 18 2 8 4 11 10 9D 9A 9B
18 Bolt SUS304
18 A Bolt SUS304
S Plug SUS304
✽: If fluid temperature will reach 80°C, FKM should be used instead of NBR TF, CF, NTF SM CFRS SM
– 47 –
Special Valves
● Specification
– 48 –
■ 3-Way Type-Y Ball Valve
● Bounding Dimension (for a Basic Model and Manual Valves)
● Dimension of a Basic Model
DN d L L1 L2 L3 L4 L5
25 025 230 050 180 027 070.4 44.6
40 038 250 051 199 031 080.1 44.9
50 051 280 224 035 090.9 49.1
056
65 064 320 0 264 043 112.6 47.4
80 076 360 069 291 046 120.1 59.9
100 102 460 076 384 064 166.7 63.3
125 127 530 084 446 075 195.9 44.1
150 151 580 073 507 090 234.9 30.1
200 200 760 110 650 111 292.2 47.8
250 249 800 086 714 130 339.7 60.3
300 298 1000 102 898 165 431.2 68.8
● Manual Valve
DN D H H1 E
25 100 122 − 250
40 130 152 − 350
50 156 163 − 350
65 186 198 − 670
80 208 212 − 670
100 276 255 − 970
E
125 310 271 − 1350
150 356 292 − 1350
200 470 − 328 −
250 524 − 393 −
300 624 − 422 −
Note: Gear operation model is applied
D
if DN value reaches 200.
H
H1
– 49 –
Special Valves
Rc
Counter Rc
Clockwise Clockwise
H
H1
DN Actuator Codes H H1 B E Rc
2 5 WN-1N 246 171
454 31
4 0 WN-1N 271 196
WN-2N 316 216
520 39
5 0 WN-2N 327 227
WN-3N 346 239 624 45
1/4
6 5 WN-2N 348 248 520 39
WN-3N 373 266
624 45
8 0 WN-3N 386 279
WN-4N 430 300
828 65
1 0 0 WN-4N 484 354
WN-5N 520 380
1 2 5 WN-5N 542 402 916 72
1 5 0 WN-5N 563 423
WN-6N 674 440
1204 90 3/8
2 0 0 WN-6N 742 508
WN-7N 773 530
2 5 0 WN-7N 844 601 1558 122
3 0 0 WN-7N 874 631
– 50 –
■ 3-Way Type-Y Ball Valve
● Flange Application Models
No. 01 02 03 04 05 06
Composition Style
No. 07 08 09 10 11 12
Composition Style
No. 13 14 15 16 17 18
Composition Style
No. 19 20 21 22 23 24
Composition Style
No. 25 26 27 28 29 30
Composition Style
No. 31 32 33 34 35 36
Composition Style
No. 37 38 39 40 41 42
Composition Style
No. 43 44 45 46 47 48
Composition Style
No. 49 50 51 52 53 54
Composition Style
– 51 –
Special Valves
● Features
Welding is easy because its ball and seat can be taken out from the top.
So it is suitable for dangerous fluid whose leakage is critical.
● Nuclear energy plant
● Reprocessing plant for nuclear fuel
● Other systems that no leakage is mandantory.
● Standard Specification
Valve Type
Items
T100 S T100 H
– 52 –
● Boundary Dimension
● Lever Operation Valve
unit: mm
approx.
DN d d1 L H1 H2 A B E Mass
(kg)
8 8 8
108 75 20 52 56 100 0.9
1 0 10 10
1 5 13 13 108 95 23 65 68 130 1.3
2 0 19 19 117 99 26 69 71 130 1.8
2 5 25 25 165 114 32 86 90 160 2.8
4 0 38 38 165 148 42 116 119 230 6.8
5 0 51 51 216 158 55 177 157 230 11
6 5 64 64 241 169 63 187 184 350 15
8 0 74 74 283 172 73 208 206 350 21
1 0 0 98 98 305 223 95 256 252 450 35
unit: mm
Actuator approx.
DN d d1 L H H1 H2 A B E h Mass
Code C m (kg)
8 8 8
176 122 20 52 56 70 93 PO-04D 212 10 to 13 2.5
1 0 10 10 108
1 5 13 13 193 133 23 65 68 80 108 PO-05D 268 13 to 16 4
2 0 19 19 117 210 142 26 69 71 80 120 6
PO-06D 314 15 to 18
2 5 25 25 233 165 32 86 90 100 103 7
165
4 0 38 38 286 209 42 116 119 151 PO-08D 392 17 to 21 20
130
5 0 51 51 216 338 239 55 177 157 156 PO-10D 500 20 to 26 28
6 5 64 64 241 393 280 63 187 184 241 46
160 PO-12D 634 26 to 33
8 0 74 74 283 403 290 73 208 206 233 52
1 0 0 98 98 305 551 391 89 256 252 285 350 POH-140D 823 − 89
– 53 –
Special Valves
● Features
● Compact and Robust.
● Wealth of operation types such as Manual Lever, Manual Rachet Lever, Hydraulic, and Pneumatic.
● Specification
● Manual Type Operation Type Lever Gear Rachet Lever
Balls Floating Ball Floating Ball Trunnion Floating Ball Trunnion
Valve Code F100NB ET100N ETGJ100N EKTGJ100N ETRH100N EKTGRH100N
Nominal Size DN 65 to 100A 125 to 150A 125 to 200A 200 to 350A 65 to 200A 200 to 350A
Bodyt: FC200 (FCD-S for ND less than 100A)
Materials Ball: SCS13 (Hard Chromeplate)
Seat: R.PTFE (Containing Carbon Fiber)
● Boundary Dimension
unit: mm
Lever Operated Gear Operated Hydraulic
DN d L1 L2 approx. approx. approx.
E H E G H W1 W2 B1 B2 H
Mass(kg) Mass(kg) Mass(kg)
6 5 64 190 87 135 15.5 − − − − 211 24
350
8 0 76 203 97 145 19.5 − − − − 108 272 74 110 221 29
1 0 0 102 229 115 450 175 30.5 − − − − 248 40
1 2 5 127 290 145 260 57 250 84 304 80
650 280 160
1 5 0 152 330 165 280 72 270 98 153 379 100 148 324 96
2 0 0 203 400 200 800 350 110 315 200 325 147 377 143
2 5 0 250 450 225 − − − 450 295 385 280 457 260
195 458 130 184
3 0 0 300 600 300 − − − 415 430 534 390
560 375
3 5 0 335 700 350 − − − 440 620 225 528 160 202 561 640
– 54 –
Legend of Product Codes
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
Valve Valve Operation Options Accessories Operation Valve Body Special Improvement Seat Nominal Connection Actuator
Type Spec. Type Category Forms Materials Body Code Materials SIze Codes
NB ( ) ( )
⑩ Seat Materials
Code Description
NTF New-PTFE
NCF PTFE Containing Carbon Fiber
NGR PTFE Containing Glass Fiber
CFM Outer-Diameter-Reinforced CF
GRM Outer-Diameter-Reinforced GR
CFMO Outer-Diameter-Reinforced CF with O-Ring
CFMR Inner/Outer-Diameter-Reinforced CF
none Initial improvement CFMRO Inner/Outer-Diameter-Reinforced CF with O-Ring
N First improvement CFRS CF/Retainer with Spring
NB Second improvement CB Carbon
NC Third improvement ST Metal Seat with Stellited
ND Fourth improvement M Thin Seat
SM Semi-Metal
⑨ Special Body SM/S Semi-Metal Seat with Spring
Code Description PE Polyethylene
J Jacketed PF PFA
⑧ Body Materials
③ Operation Type ⑤ Accessories Code Description
Cartegory Code Description Code Description A Set of Top Devices
00
none Standard Lever P Positioner for Auto Valve
G Gear M Dual Limit Switch 01 FC200
Manual
ES Extended Stem MW Limit Switch for Open and Close 04 FCD400 or FCD-S
EX Extended Gland MS Limit Switch for Close 05 SCPH2
Double Actiong MO Limit Switch for Open 07 SCS13, 13A
PN
Opened/Closed under Pressure E Solenoid Valve 12 SCS14, 14A
Reverse Acting F Filter 13 SCS16, 16A
PO
Opened under Pressure, Closed by Spring R Reducing Valve
Pneumatic Direct Acting K Oiler with Oil Supply Device ⑦ Valve Forms
PC
Closed under Pressure, Opened by Spring V Air Filter Regulator Code Description
PN-✽✽T 2 Staged Open/Close, Double Acting Z Triple (Double) Set 1 2-Way Full Bore
PO-✽✽T 2 Staged Open/Close, Single Acting CW Speed Controller for (both Open and Close) Side 2 2-Way Reduced Bore
WN 3-Way Type-Y Double Acting CO Speed Controller for Open Side 3 3-Way
Hydraulic ON Hydraulic CS Speed Controller for Close Side 4 4-Way
SR SRH Seibu Electric Q Quick Exhaust Valve
MSJ SRJ & B Bypass Valve ⑥ Operation Category
Electric Machinery
SH LTRH + BRL Code Description
MK PMK-S Kawaden none Manual Valve
1 Switching Valve (On/Off)
3 Control Valve
4 Electric Valve
④ Options
① Valve Type ② Valve Specification Code Description
Code Description Code Description L Angle-Limitter on Open Side (for Double Acting)
E Type-E Valve none Floating Ball R Angle-Limitter on Close Side (for Double Acting)
D Type-D Valve K Trunnion Ball H Manual Operation Device (for Single Acting)
F Fire-Safe Valve T For Shield Use Lever Handle (for Double Acting)
W
V Tough Seal V Port Valve H Supports High Temperature Clamp Handle (for Single Acting)
T Top Entry Valve R O-Ring Implemented (Gland) T Angle-Limitter (for Double Acting)
Y 3-Way Type-Y Valve TR Throttle Device L Manual Handle (for Single Acting)
– 55 –
• The ISO 9001 · 14001 certificate was awarded
CAUTION
Specifications and performance figures of products contained in this catalog are on the design calculations, in-house tests,
actual records of product application, and the official standards and specifications. They are presented as the user guide on
the use of product concerned under general service conditions. Users intending to use the product under a special condition
are required to receive engineering advice from this company in advance or to make their own studies and evaluation to verify
performance on their own responsibility. This company shall not be liable for any damages, material or human, that may arise
without following this procedure. In as much as full care was taken in editing this catalog, users are kindly requested to make
contact with this company for any questions or discrepancies found. This catalog is subject to change without notice for the
purpose of correcting error, supplementing or improving insufficient content, updating the content to the improved product
performance, design change, discontinuation of product and other reasons. Revised version automatically invalidates catalogs
issued prior to the current version. When you select products for possible order placement, please check the issuance code
number on the back of your catalog and verify with this company that it is the latest version.
OSAKA Sales Department: Takakura Bldg., 2-5-9, Awaji-machi, Chuo-ku, Osaka-shi Osaka 541-0047
http://www.ndv.co.jp
09. 10. HA
99. 09.