Professional Documents
Culture Documents
Project Ramp With Picture
Project Ramp With Picture
Construct 20' ramp with approximately 7 degree slope to match existing wooden deck.
Ramp will be 48" wide and deck will be 2" x 6" planks
All lumber will be pressure-treated
Top handrail will be 2" x 6" horizontal planks
Under handrail (balustrade) will be stainless steel marine grade 1/8" cable tensioned with
stainless steel turnbuckles
Stainless steel grommets will be used in upright posts
Ramp decking will use stainless steel #10 x 3"deck screws
All other fasteners will be galvanized steel for longevity
Note: Ramp will be painted by owner
Lumber
6 each: 2" x 8''x 16'
20 each: 2" x 6'' x 12'
2 each: 4" x 4" x 8'
3 each: 2" x 4" x 8'
Fasteners
Galvanized: lag screws, carriage bolts, washers and nuts, hanger brackets and flanges
Stainless steel: Deck screws (#10 x 3"), 1/8" marine grade cable, turnbuckles and terminals