Professional Documents
Culture Documents
feeler
Types of feeler:
Mechanical:
a. side sweep
b. depth (diameter gauge & penetration gauge)
Electrical
a. Two pronge
b. photo electrical
Electro- mechanical
Mechanism of:
A mechanism making contact with the pirn yarn to detect the yarn was present or not in the
pirn is called feeler.
If the yarn is present the feeler will allow the loom to continue running but if there is no yarn at
this point then the feeler will activate the start of a chain procedure and finally on the brake
and stop the loom.
Robust construction
Cheaper
Disadvantages:
1.More roughly treatment is on the pirn yarn during feeling because of the slot in the feeler
blade as saw
2.the mechanism is totally inactive because of reducing the elasticity or breaking the return
spring for more use
3. The stem o f more using pirn is to be rough and then it loses its activeness
Disadvantages:
circuit may be uncompleted because of rust in the point of metal trip where the prong contacts
It is not properly acts because of reducing elasticity or breaking of one or both of the return
spring