Professional Documents
Culture Documents
Emission Control PDF
Emission Control PDF
INSPECTION
(2) Blow air into the intake manifold side, and check
that air passes through with difficulty.
Intake Manifold Side
If operation is not as specified, replace the ventilation valve.
(c) Remove the clean hose from the ventilation valve.
A59512
Gasket
A76682
A67137
Vacuum
(3) With the air inlet port closed, apply vacuum (3.43
Air Inlet Port kPa, 25.7 gf/cm2, 1.01 psi) to the vent port, and
Vent Port
check that air is sucked in from the purge port.
If operation is not as specified, replace the charcoal canister.
(3) With the vent, purge and air inlet ports closed, apply
Vent Port Vacuum vacuum (1.42 kPa, 11 mmHg, 0.42 in.Hg) into port
A
A, and measure how long it takes for vacuum to
drop.
Vacuum drop time: 10 sec. or more
If operation is not as specified, replace the charcoal canister.
(4) Reinstall the air hose between ports A and B.
Air Inlet Port
Purge Port A67143
Air
A A74867
Battery
Closed
Valve A74868
(4) Check that air does not flow from port A to port B.
(5) Check that air flows from port A to port C.
C If operation is not as specified, replace the charcoal canister.
Battery
Air
A A74869
Resistance
B16402 A75321
No Continuity
B16403 A75322
Air
B16404 A75323
Air
Battery
B16405 A75324
ON-VEHICLE INSPECTION
B06544 A75352
A75313
A75314
A72589
Battery
A75315
A75318
Air
A75317
REPLACEMENT
A79515
A79517
(c)
(d)
A79731
A79732