VEHICLE CONTROL SYSTEM - IGNITION OR STARTER SWITCH ASSY
8004E-02
INSPECTION
1. INSPECT IGNITION OR STARTER SWITCH ASSY
ACC (a) Inspect the switch resistance. LOCK ON Standard: Terminal No Switch Position Specified Condition
START 1-3 ACC
1-2 1-3 ON 5-6 Below 1 Ω 1-2 B67054 5-4 START 5-6 If the result is not as specified, replace the switch assy.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author: Date: 3511
80-1 VEHICLE CONTROL SYSTEM - IGNITION OR STARTER SWITCH ASSY
IGNITION OR STARTER SWITCH ASSY
8004D-02
REPLACEMENT HINT: The installation is in the reverse order of the removal. 1. REMOVE STEERING COLUMN COVER LWR (See page 50-8 ) 2. REMOVE STEERING COLUMN COVER UPR (See page 50-8 )
3. REMOVE IGNITION OR STARTER SWITCH ASSY
(a) Disconnect the ignition switch connector and un-lock warning switch connector. (b) Remove the clamp. (c) Remove the 2 screws and ignition switch.