To
ie: Teshnical DocNo]
ETS
(C - IRON PLATED ITEMS To292/1
SLNo | Parameters Specifiation Method of Inspection
1 |surface Condition \Zine tron Plating
hickness Gauge
ickness 12.0 15.0 microns Arpsoaral
Wear 10 250°C for I how
Lhesion 8 No peetoff Quench in water at
JRoam Tenperature
4 |Piswat lire from Peel-off Pttings, Uncoverage & Dullness — |iswal
5 [Corrosion Resistance
[240 Pours (Min) - White Rust sual Inspection for
a Par Fellow & White lust or abmormaives on]
pen L480 Pours (Ain) - Red Rust purtace
[Passivation 1S: 9844) "
560 Hours (Min) - Red Rust purface
a 480 Hours (Min) - Red Rust fruntace
Fest Cerificate
Wire of Passivation Hexavalent passivation for Green fear
est Cerificate
f |Naure ofchemical — |Akaline base ine forall passivation orttenten
[eat treatment after Electro-plating is required for items
lof Tensile Srength above 1030Mpa or Hardness above
4HIRC
rest Certificate
Kerifcation
idrogen
Jembritiement Relief
Wore: Parameter marking indicate sampling plan and acceptance eriteria ax mentioned below
1 2 nas per lot & No defective
2 ‘ I per lot & No defective
3 ” 10 nos per tor & No defeetve
For all other parameters (without marking) compreliensive inspection to be done
‘once in 3 months for 3 nos and no defectives
Wore : Approved chemical supplier based on the validation as mentioned below
1 Chemetall rai = coved yA
4
swt
o3forhen
See OS te
IName:_S_ Mubarak Hameed
wy a Foraplt No TDaIPDITG
@%X,. May'01
es