Professional Documents
Culture Documents
Cisco Summ4
Cisco Summ4
The following types of IPv4 and IPv6 static routes will be discussed:
Default static route: A default route is a route that matches all packets and is used by the router if a packet
does not match any other
A default static route is simply a static route with 0.0.0.0/0 as the destination IPv4 address
It is recommended that when the exit interface is an Ethernet network, that a fully specified static route is used,
including both the exit interface and the next-hop address. With the use of CEF, a fully specified static route is no
longer necessary. A static route using a next-hop address should be used.