Professional Documents
Culture Documents
PDS STRATA EPOXY MT 45520 en-US PDF
PDS STRATA EPOXY MT 45520 en-US PDF
Strata Epoxy MT
Mix: 45520. Base: 45529. Curing Agent: 95521.
Description: Strata Epoxy MT is a two-component solvent-borne epoxy paint for use in areas of medium
traffic.
Recommended use: Designed to protect concrete floors in areas exposed to medium traffic such as car parks,
warehouses, factories and sports stadiums. Ideal to medium duty floors were protection to
spillages and medium abrasion is specified.
Availability: Available in 5L, 10L. (Packing may vary from country to country depending on local requirements).
Physical constants*:
*The physical constants stated are nominal data according to the Hempel Group's approved formulas.
They are subject to normal manufacturing tolerances and where stated, being standard deviation
according to ISO 3534-1.
**The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A
practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and
relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.
Further references can be found in the "Explanatory Notes".
Application details:
Safety: Handle with care before and during usage. Read all labels on packaging and paint containers
before usage, consult Hempel for any inquiries. Material Safety Data Sheets follows all local
and national safety regulation. Avoid inhalation; avoid contact with eyes and skin. Do not
swallow. Take precautions against possible risks of fire or explosion. Apply only in well-
ventilated areas. Remember to protect the environment.
Substrates: Concrete.
Application conditions: Application can only proceed at temperatures above 10ºC, relative humidity below 75%. Other
sealer/filler types may be specified. Drying data are given on the assumption that proper
ventilation is provided. Strata Epoxy MT should not be applied to concrete with more than 4%
moisture.
Surface preparation: The surface should be stable, firm, dry and free from dust, sand, loose old paint, laitance, dirt,
grease and oil. Proper surface preparation is a must, mechanical surface preparation is highly
recommended (see Strata Surface preparation brochure or consult our technical
representatives).
Filling: Strata Epoxy Floor Filler. Recommendation: apply primer/sealer prior to the application of a
specified filler.
Mixing: Strata Epoxy MT is a two-component material (base and curing agent), which must be mixed
together prior to use. Stir the base continuously while adding the contents of the curing agent.
Mix until the mixture is homogeneous.
Application: Apply the mixed product to the surface with a good quality of short haired roller or brush. Let it
dry for 24 hours before applying the second coat with the same tools used for the first coat.
The second coat should be applied at a right angle to the first coat.
Storage & handling: Product must be stored as per local regulation. Keep in dry and ventilated location, far from
heat and direct sunlight.
Remarks: Under direct sunlight there may be some discolouration, yellowing and loss of gloss over a
period of time. Degree of yellowing can vary from product to product. This has no influence on
the function and performance of the coating. For UV protection, apply a coat of Strata PU Top.
For explanations, definitions and scope, see “Explanatory Notes” available on hempel.com. Data, specifications, directions and
recommendations given in this data sheet represent only test results or experience obtained under controlled or specially
defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the
Products herein must be determined exclusively by the Buyer and/or User.
The Products are supplied and all technical assistance is given subject to Hempel's general conditions of sales, delivery and
service, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all
claims involving, any liability, including but not limited to negligence, except as expressed in said general conditions for all
results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the
overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.