Professional Documents
Culture Documents
DK208D RC PDF
DK208D RC PDF
15 / 208Amp
1200V / 25 Amp Rectifiers
Rectifier
Description
Applications
A K
Typical applications are high voltage pulse generator using
capacitor discharge such as electric fences and stun guns,
and high voltage DC to DC converter seen in small EV /
E-bike charger systems.
Main Features
Dxx15Lrectifier
& Dxx20L & Dxx25L Series ©2017 Littelfuse, Inc
DK208D diode Specifications are subject to change without notice.
Revised: 05/26/17
Teccor® brand Thyristors
15 / 208Amp
1200V / 25 Amp Rectifiers
Rectifier
Static Characteristics
TJ = 25°C 20
IRM VRRM TJ = 125°C MAX. 500 μA
TJ = 150°C 1000
Thermal Resistances
Figure 1: On-State Current vs. On-State Figure 2: Power Dissipation vs. Average Forward On-
Voltage (Typical) State Current (Typical)
120
12
Instantaneous Forward Current (iF) – Amps
TJ = 25°C
Average Forward Power Dissipation
100
10
80
8
[PF(AV)] - (Watts)
60
6
40 4
20 2
0 0
0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 0 2 4 6 8 10
Average Forward Current [IF(AV)] - Amps
Instantaneous Forward Voltage (vF) – Volts
Dxx15Lrectifier
& Dxx20L & Dxx25L Series ©2017 Littelfuse, Inc
DK208D diode Specifications are subject to change without notice.
Revised: 05/26/17
Teccor® brand Thyristors
15 / 208Amp
1200V / 25 Amp Rectifiers
Rectifier
150
Maximum Allowable Case Temperature
140
130
(TC) - °C
120
110
100
90
0 2 4 6 8 10
Soldering Parameters
TL
- Time (min to max) (ts) 60 – 180 secs tL
TS(max)
Average ramp up rate (Liquidus Temp) Ramp-do
Ramp-down
5°C/second max
(TL) to peak Preheat
Terminal Finish 100% Matte Tin Plated Test Specifications and Conditions
High Temperature MIL-STD-750: Method 1040, Condition A
UL Recognized epoxy meeting flammability Voltage Blocking Rated VRRM, 150°C, 168 hours
Body Material
rating V-0 MIL-STD-750: Method 1051
Temperature Cycling -40°C to 125°C, 15-minute dwell,
Lead Material Copper Alloy
100 cycles
Biased Temperature & EIA/JEDEC: JESD22-A101
Humidity 320VDC, 85°C, 85%RH, 168 hours
Design Considerations MIL-STD-750: Method 1031
High Temp Storage
150°C, 1008 hours
Careful selection of the correct component for the
application’s operating parameters and environment will Low-Temp Storage 1008 hours; -40°C
go a long way toward extending the operating life of the Resistance to MIL-STD-750: Method 2031
rectifier. Good design practice should limit the maximum Solder Heat 260°C, 10 seconds
continuous current through the main terminals to 75% of
Solderability ANSI/J-STD-002, Category 3, Test A
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking Lead Bend MIL-STD-750: Method 2036, Condition E
and selection of voltage ratings for worst case conditions. Moisture Sensitivity
Level 1, JEDEC-J-STD-020
Overheating, overvoltage (including dv/dt), and surge Level
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
E 6.71
Anode
D TC MEASURING POINT 5.28
.208 .264 Inches Millimeters
Dimension
A Min Typ Max Min Typ Max
5.34 6.71
.210 .264 A 0.037 0.040 0.043 0.94 1.01 1.09
B
B 0.235 0.243 0.245 5.97 6.16 6.22
P
1.60
.063
C 0.106 0.108 0.113 2.69 2.74 2.87
C Q
1.80 D 0.205 0.208 0.213 5.21 5.29 5.41
GATE .071
AREA : 0.040 IN2
Cathode F
3
E 0.255 0.262 0.265 6.48 6.65 6.73
Anode G 4.60
.118 .181
I
F 0.027 0.031 0.033 0.69 0.80 0.84
G 0.087 0.090 0.093 2.21 2.28 2.36
O L
K
J
H H 0.085 0.092 0.095 2.16 2.33 2.41
M I 0.176 0.179 0.184 4.47 4.55 4.67
N
J 0.018 0.020 0.023 0.46 0.51 0.58
K 0.035 0.037 0.039 0.90 0.95 1.00
L 0.018 0.020 0.023 0.46 0.51 0.58
M 0.000 0.000 0.004 0.00 0.00 0.10
N 0.021 0.026 0.027 0.53 0.67 0.69
O 0° 0° 5° 0° 0° 5°
P 0.042 0.047 0.052 1.06 1.20 1.32
Q 0.034 0.039 0.044 0.86 1.00 1.11
DK208D rectifier
Dxx15L & Dxx20L diode
& Dxx25L Series ©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 05/26/17
Teccor® brand Thyristors
15 / 208Amp
1200V / 25 Amp Rectifiers
Rectifier
Packing Option
D K2 08 D
DK208D
DEVICE TYPE PACKAGE TYPE
D: Rectifier D: DPAK
VOLTAGE RATING
CURRENT RATING
K2: 1200V
08: 8A YMLDD ®
0.157
(4.0)
0.059
Dia
(1.5)
Gate Cathode
0.63
0.524 *
XXXXXX
(16.0)
XXXXXX
XXXXXX
XXXXXX
(13.3)
DC
DC
DC
12.99
0.512 (13.0) Arbor (330.0)
Dimensions
Hole Dia.
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics.
DK208D
Dxx15L rectifier
& Dxx20L diode
& Dxx25L Series ©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 05/26/17