SoftCAST. Sprue Details with Flow Velocity and Reynold No. Details 21-10-2020
Sprue Details
No.of Sprues | 1
Sprue Cross Sec | Circular
Sprue Type | Straight
Sprue Well Cross Sec | Square
Height (mm) | 15.45
Ovality Factor (mm) | 0
. Sprue Well Depth/Sprue
B/W Aspect Ratio (mm) Rate | 2
Sprue Well | , Sprue Well Side Sprue Exit
Depth/Runner Ht (mm) Dia(mm) | 1.25
Sprue Well Dia/Sprue Sprue Well Width/Sprue
Exit Dia (mm) Exit Dia (mm)
Main Dim | Minor Axis Well Breadth (mm)
Entrance Dia (mm) | 11.56 Well Dia (mm)
Exit Dia(mm) | 1156 ‘Well Depth (mm) | 30.4
Entrance Area(sqmm) | 105 Well Side (mm) 14.45
Exit Area (sqmm) | 105 Well Width (mm)
Sprue's Flow Velocity and Reynold No. Details
Sprue Entrance | 155.11 Sprue Exit | 155,11
Velocity(cms/sec) Velocity(cms/sec)
Sprue Entrance | 49751,63 Sprue Exit | 40751,63
Reynold No. Reynold No.
Sprue Entrance ] 16 64 Sprue Exit | 16 69
Weber No. Weber No.
Sprue Entrance | Severe surface turbulence is indicated during filling in the sprue entrance section,
Velocity Message
Sprue Exit Velocity | Severe surface turbulence is indicated during filling, in the sprue exit section.
Message
Sprue Entrance | Very high bulk turbulent flow is indicated, Surface turbulence is also indicated.
Reynold Message
Sprue Exit Reynold | Very high bulk turbulent flow is indicated, Surface turbulence is also indicated.
No. Message
Page 1Sprue, Pour Basin and Ingate Details 21-10-2020
Sprue's Weber No Message Details
Surface turbulence is likely to be severe, leading to mixing of the surface liquid layers
Sprue Entrance
Weber No Message | with the bulk of the molten metal.
Sprue Exit Weber No, | Surface turbulence is likely to be severe, leading to mixing of the surface liquid layers
Message | with the bulk of the molten metal,
Pour Basin
No.of Pour Basin | 1 Type | conical
Conical Pour Basin
Bottom Dia (mm) [tse Top Dia (mm) | 250
‘Depth of Pour Basin (mm) | 2322
General, Flow Velocity,Reynold No,Weber No Ingate Details
No. of Ingates | 2 Cross Section | Rectangular
Ratio: H/W | 0.25
Gross Section Area (sqmm) | 63 Height (mm) | 3.97
Width (mm) | 15.87 Radius (mm)
Diameter (mm)
Flow Velocity (ems/sec) | 129.25 Reynold No. | 18653.18
Weber No. | 11.56
FlowVelocity Message | Bulk turbulent flow is indicated. Whereas surface turbulence is not indicated,
casting defects could occur.
Reynold No. Message | Severe surface turbulence is indicated during filling inthe ingate section.
Weber No. Message | Surface turbulence is likely to be severe, leading to mixing of the surface liquid
layers with the bulk of the molten metal.
Page 2SoftCAST Uniform Runner Details 21-10-2020
No. of Runner | 1 Type | Uniform
Ratio : H/W | 2 Cross Section | Rectangular
Number ofright-angled | 9
bends in the Runner
Height (mm) | 15.2 Width (mm) | 7.6
Cross Section Area (sq.mm) | 116 Diameter (mm)
Radius (mm)
Flow Velocity and Reynold No Details
Flow Velocity (cms/sec) | 140.4 Reynold No, | 32468
Weber No. | 14
Flow Velocity Message | Seve sce turbulence indicated during ling nthe uniform anne section.
Very high bulk turbulent flow is indicated, Surface turbulence is also indicated,
Reynold No. Message | ¢. ting defects would occur
Surface turbulence is likely to be severe, leading to mixing of the surface liquid layers
Weber No. Message | sith the bulk ofthe molten metal
Uniform Runner Length Details
Length for Runner 1 (mm) | 250
Page3