Professional Documents
Culture Documents
https://www.dropbox.com/s/muovxkypc6tgejr/%E8%B
D%AF%E4%BB%B6%E6%96%87%E5%AD
%97%E7%89%88.zip?dl=0
Carving picture(雕刻圖片)
Engraving black and white pattern image section
1. Open the software and click the 'u' icon to connect to the machine
2. Drag the image that needs to be directly engraved in the software (black image in
jpg format on a white background)
3Select black and white mode
4Select the yellow icon and click on it
5. Click in the middle of the number, then select Zoom in or out, resize as needed,
then click OK. (Unit: mm. If you need to quickly enter the desired size, delete the
original size number, enter the new number directly, then click 'Enter' on your
computer, then click 'OK'.
6. Click
7. Adjust laser power and engraving depth
Engraving preview: Double-click the picture, the machine will position the frame,
please engrave the part on the laser head, for example, you need to engrave it in the
middle of a piece of paper, please put the middle part on the paper, laser head walking
The place is where it is carved.
9. Double click on the image to pause the position
10. Click the triangle icon to start printing
11. You can stop the engraving task by clicking the yellow icon to stop printing the
red icon.