Professional Documents
Culture Documents
Technical Catalogue
January
2018
web edition
®
HPV 310
General
Optimised performances and integration of the greatest number of functions are the objectives planned and achieved
through the development of the HPV valves, a range of the latest generation of proportional directional valves that per-
form two simultaneous functions: directional control and flow control that is unaffected by load variations. Their op-
eration is based on the proportional hydraulic principle, e.g. keeping pressure loss constant through a variable section.
The HPV spool can assume an infinite number of positions making the crossing areas infinitely variable, thus regulating
the flow in relation to the pressure difference ('p) throughout the entire operating range. By means of logical selec-
tion, an LS signal (feedback) is taken from the highest pressure ports and sent to the
pump flow regulator through the LS port so thath when a main spool is activated the pump regulator well adjust the
displacement, so thath, the set different pressure between P and LS is mainteined.
The pressure compensation provided by the two-way pressure compensators installed on each element, allows multi-
ple operations to be performed at the same time without reciprocal effects.
With HPV proportional directional valves program Dana Brevini is committed to supplying products that meet the ever
encreasing demands to suit different market applications.
© 2018 Dana Brevini S.p.A. all rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics,
VPS Brevini, OT Oiltechnology, logos are trademarks or are registered trademarks of Dana Brevini S.p.A. or other
companies Dana in Italy and other countries.
The technical features supplied in this catalogue are non binding and no legal action can be taken against such mate-
rial. Dana Brevini will not be held responsible for information and specifications which may lead to error or incorrect
interpretations. Given the continuous technical research aimed at improved technical features of our products, Dana
Brevini reserves the right to make change that are considered appropriate without any prior notice. This catalogue
cannot be reproduced (in while or in part) without the prior written consent of Dana Brevini. This catalogue supersedes
all previous ones.
Use of the products in this catalogue must comply with the operating limits given in the technical specifications. The
type of application and operating conditions must be assessed as normal or in malfunction in order to avoid endange-
ring the safety of people and/or items..
IE/HPV310/03-2017 1
®
HPV 310
2 IE/HPV310/03-2017
®
Technical features
Hydraulic operation
Start 5 bar 72 psi
Pilot pressure
End stroke 19 bar 275 psi
Max. pilot pressure 30 bar 436 psi
IE/HPV310/03-2017 3
®
7 12.5 19 bar
Q A/B
GPM l/min
450
110
400
100
90 350
80
HEM oil flow with LS A/B pilot
300
70 relief valves
250
60 (pressure compensated)
50 200
40 150
30
100
20
10 50
0
P
0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 bar
0 50 100 150 200 250 300 350 400 450 500 PSI
DP
PSI bar
25
300
20
P A (B)
15
200
HEM pressure drop
B(A) T
10
100
5
Q
0 0
0 50 100 150 200 250 300 350 400 450 500 l/min
4 IE/HPV310/03-2017
®
HPV310 configuration
HPV310 module selection chart, basic and hybrid configuration (mit inlet plus HPV77 - HPV41)
MHFP
HSC
HSRR
HEAS INTF
HEM HETS
HEAD
CRP04HP
(n.a.)
HSE HESC
HDRM
CRP04HP
(n.c.)
HEAD
HETS
INTF
HFLS
HCF
MHFK
MHCP
HPV41
HPV77
HPV77+HPV41
HCM
HSC000410**** HSC000770**** HSC000410****
HEM000410****
HSIF HEM000410****
HEM000770****
HSIF
HSEF007705041 HSEF007705041
HEM000770****
HSIF
HSC000410**** HEM000410****
HSC000410****
HCM
HCM
HCM
HSRR00770****
HSRI00770**** HCM
+ HSRI00770****
HSRI00410**** +
HSRI00410****
IE/HPV310/03-2017 5
®
Inlet section
Code Description
HSE0003101012 Inlet module for LS or constant pressure pumps
T Ls Tp Lp T P
Example with HSE inlet modu-
le for LS variable displacement
CVR06 pumps with LS open not plugged
Lp
W1
MT 1 P
W2
KEC25MP
Ls
KEL25
MP
MP
T Ls Tp Lp T P
Example with HSE inlet mo-
dule for constant pressu-
CVR06
Lp re systems with LS plugged
(HSE0003101010)
W1
MT 1 P
W2
KEC25MP
Ls
KEL25
MP
MP
6 IE/HPV310/03-2017
®
[1.57]
[1.043]
40
26.5
T PORT
SAE 1" 1/2
3000 psi
CRP..
236,5 [9.31]
max 85
230 [9.05]
MT
1/4" BSPP 13
MP
1/4" BSPP 13
LS MP
1/4" BSPP 13 1/4" BSPP 13
40 200 [7.87]
[1.57]
245 [9.64]
284 [11.18]
P PORT
SAE 1" 1/4 82 [3.22]
6000 psi
100 [3.96]
mm [inches]
[1.57]
40
IE/HPV310/03-2017 7
®
Inlet section
Code Description
HSE0003101310 Inlet module for fixed displacement pumps
If connected with HPV41 or HPV77 proportional valves use only
HPV41 or HPV77 special elements code HEM00S*** (S identify ele-
ments without cap on LS line).
T Ls Tp Lp T P
W1
W2
1
Y=T
LS
Z1=LS
Ls
X=P KEL25
MP
AP
MP
8 IE/HPV310/03-2017
®
107 [4.21]
= =
W1
1/4" BSPP
13
[1.57]
M12x1.75-6H
40
26.8 [1.05]
LP
1/4" BSPP 15 [0.59] 30 [1.18] W2
13 1/4" BSPP
13
58 [2.28] 79.20 [3.12]
T PORT
1" 1/2
SAE 3000 psi
69 [2.71]
MP
1/4" BSPP
236 [9.29]
230 [9.05]
13
MT
1/4" BSPP
13
LS
1/4" BSPP
13
[1.57]
40
P PORT
1" 1/4
SAE 6000 psi
IE/HPV310/03-2017 9
®
Code Description
Mid inlet module for LS or constant pressure pum-
HFLS003101212 ps
T Ls Tp Lp T P
Example with HFLS inlet modu-
le for LS variable displacement
CVR06
Lp
pumps with LS open not plugged
W1
MT 1 P
W2
KEC25MP
Ls
KEL25
MP
MP
T
T Ls Tp Lp T P
T Ls Tp Lp T P
Ls
KEL25
MP
MP
T
T Ls Tp Lp T P
10 IE/HPV310/03-2017
®
46.5 46.5
n. 2 [1.83] [1.83]
M12x1.75-6H 107 [4.21]
[0.78]
20
45
T PORT
SAE 1" 1/2
3000 psi
CRP..
236,5 [9.31]
max 85
230 [9.05]
MT
1/4" BSPP
MP 13
1/4" BSPP
LS
1/4" BSPP
40 200 [7.87]
[1.57]
240 [9.45]
279,2 [10.99]
P PORT
SAE 1" 1/2
6000 psi
100 [3.96]
mm [inches]
IE/HPV310/03-2017 11
®
Code Description
HFLS003101310 Mid inlet module for fixed displacement pumps
If connected with HPV41 or HPV77 proportional valves use only
HPV41 or HPV77 special elements code HEM00S*** (S identify ele-
ments without cap on LS line).
HPV310 interface
T Ls Tp Lp T P
CVR06
Lp
MT P Example with HFLS inlet module
W1 for fixed displacement pumps
W2
1
Y=T
LS
Z1=LS
Ls
X=P KEL25
MP
AP
MP
T Ls Tp Lp T P
HPV77 interface
12 IE/HPV310/03-2017
®
107 [4.21]
= =
W1
1/4" BSPP
13
M12x1.75-6H
40
26.8 [1.05]
LP
1/4" BSPP 15 [0.59] 30 [1.18] W2
13 1/4" BSPP main pressure relief
13
58 [2.28] 79.20 [3.12] valve adjustment
T PORT
1" 1/2
SAE 3000 psi
69 [2.71]
MP
1/4" BSPP
236 [9.29]
230 [9.05]
13
MT
1/4" BSPP
13
LS
1/4" BSPP
13
82 [3.22]
100 [3.93]
mm [inches]
[1.57]
40
P PORT
1" 1/4
SAE 6000 psi
IE/HPV310/03-2017 13
®
HEM module
Working section
• Built-in adjustable pressure compensator
• Symmetrical distribution that allows the manual activation position to be
reversed with all servocontrols
• Built-in adjustable pilot operated shock-suction valves
• Interchangeable spools
• LS and LSA/B pilot connections
• LSA/B pilot relief valves
6 5 4 • LS and LSA/B electrical unloading (work in progress, not available yet)
• Electrical actuation
MHPF, PWM signal, open loop control
MHPOD, 0-10 V, 0-20 mA, 0,5 UDC signal, open loop control
MHPED, 0-10 V, 0-20 mA, 0,5 UDC signal, closed loop control
2 (work in progress, not available yet)
3
• Mechanical flow adjustment
7
Code Description
Working section with holes LsA-B for electrical
8
HEM0003103010 unloading plugged
A 7 8
T
2 3 LsB Pos. Description Type Page
Ls 1 Spool Complements 11
B LsA
2 Shock valve or plug Complements 12
3 Shock valve or plug Complements 12
4 Manual actuation or flange Complements 13
4 5 Adapter interface Complements 16
1 6 Control Complements 17
6 7 Adapter interface (bottom side) Accessory 22
5
4 LSA / LSB / LS electrical unloading
8 Accessory 23
P1 signal (bottom side)
T Ls Tp Lp T P
[0.55]
LS pilot signal
14
125 [4.92]
BSPP 1/4”
[1.14]
29
20
LSA pilot connection
BSPP 1/4” T connection
[0.59]
127 [5]
15
230 [9.05]
[2.36]
60
312 [12.28]
A PORT B PORT
SAE 1" 1/4 60[2.36] 80[3.14] 60[2.36] SAE 1" 1/4
6000 psi 6000 psi
pressure compensator
adjustment
100 [3.93]
14 IE/HPV310/03-2017
®
HEM complements
HEAS - Main spool for flow control, double acting (position 1)
Flow range
Spool type Code Size 'p [bar] Symbol
[l/min]
HEAS003104200 05 8 ÷ 14 180 ÷ 270
B A
4-way, 3-position HEAS003104225 10 8 ÷ 14 250 ÷ 320
01N
A, B closed HEAS003104240 40 8 ÷ 14 310 ÷ 410
T P T
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
IE/HPV310/03-2017 15
®
HEM complements
HEAD - Shock and suction valve for A – B ports (position 2-3)
Code Description
HEAD003101450 Shock and suction valve. Setting up to 400 bar
A 7 8
T
2 3 LsB
Ls
B LsA
4
1
6 5
4
P1
T Ls Tp Lp T P
Code Description
HETS003103000 Plug
A 7 8
T
2 3 LsB
Ls
B LsA
4
1
6 5
4
P1
T Ls Tp Lp T P
16 IE/HPV310/03-2017
®
HEM complements
HDRM - Manual activation (position 4)
Code Description
Manual actuator for electric control without spool
HDRM003107001 stroke limiter
Manual actuator for electric control with spool
HDRM003107002 stroke limiter
Manual actuator for manual control without spool
HDRM003107003 stroke limiter
Manual actuator for manual control with spool
HDRM003107004 stroke limiter
A 7 8
T
2 3 LsB
Ls
B LsA
6 5
4
P1
T Ls Tp Lp T P
A 7 8
T
2 3 LsB
Ls
B LsA
6 5
4
P1
T Ls Tp Lp T P
IE/HPV310/03-2017 17
®
HEM complements
HDRM - Manual actuation (position 4)
A 7 8
T
2 3 LsB
Ls
B LsA
6 5
4
P1
T Ls Tp Lp T P
A 7 8
T
2 3 LsB
Ls
B LsA
6 5
4
P1
T Ls Tp Lp T P
°
25,72 98 [3.85]
271 [10.66]
115.5 [4.54]
3.5
[0.13]
59 32.5
[2.32] [1.27]
Spool stroke limiter
18 IE/HPV310/03-2017
®
HEM complements
HCF - Flange with stroke limiter (position 4)
Code Description
HCF0003104010 Flange with stroke limiter
HCF0003104011 Flange without stroke limiter
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
0.39
10
93 [3.66]
76 [2.99]
98 [3.85] 76 [2.99]
[1.18]
32
[0.11]
3
mm [inches]
IE/HPV310/03-2017 19
®
HEM complements
INTF - Adapter for controls (position 5)
Code Description
INTF003105015 Adapter for controls
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
112.5 [4.42]
108 [4.25]
76 [2.99]
98 [3.85] 76 [2.99]
80
mm [inches]
20 IE/HPV310/03-2017
®
HEM complements
MHPF - Control (position 6)
Code Description
MHPF003107050 12 VDC control
MHPF003107051 24 VDC control
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
164 [6.45]
108 [4.25]
47 [1.85] 67 [2.63]
mm [inches]
IE/HPV310/03-2017 21
®
HEM complements
MHPOD - Control (position 6)
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
mm [inches]
22 IE/HPV310/03-2017
HEM complements
®
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
71.5 [2.81]
179.5 [7.06]
110 [4.33]
6 [0.23]
98 [3.85] 74 [2.91]
~ 88.7 [3.49]
20 [0.78]
mm [inches]
IE/HPV310/03-2017 23
®
HEM complements
MHPH - Control (position 6)
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
PA - BSPP 1/4”
28 [1.10] 47 [1.85]
108 [4.25]
PB - BSPP 1/4”
mm [inches]
PB with standard right HPV feed
PA for left HPV feed
24 IE/HPV310/03-2017
®
HEM complements
HCF - Flange (position 6)
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
47 [1.85] 52 [2.04]
108 [4.25]
mm [inches]
IE/HPV310/03-2017 25
®
HEM accessories
INTF - Adapter (position 7)
Code Description
INTF003104005 Adapter
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
98 [3.85]
200 [7.87]
30 [1.18]
28 [1.10]
25 [0.98]
25 [0.98]
mm [inches]
26 IE/HPV310/03-2017
®
HEM accessories
MHFO - Unloading electrical modules LSA/B signal (position 8)
LSA / LSB pilot signal unloading solenoid valve.
- Normally open: the on/off solenoids are not energized, there is no flow on A/B
work ports;
- Normally closed: the on/off solenoids are energized, there is no flow on A/B work
ports;
while the pressure in the open will be equal to the P o T unloading pressure value on
the inlet section, plus the counterpressure acting on T line.
In closed centre circuits (under the same operating conditions) the pressure will be equal
to the stand-by pump pressure.
Ls
B LsA
T Ls Tp Lp T P
293 [11.535]
98 [3.85]
39 [1.53]
76 [2.99]
98 [3.85]
24 [0.94]
55 [2.16]
36 [1.41]
45 [1.77]
mm [inches]
IE/HPV310/03-2017 27
®
HEM accessories
MHCP - Unloading electrical modules LS signal (position 8)
Code Description
MHCP007706210 Active on LSA - 24VDC
MHCP007706220 Active on LSB - 24VDC
MHCP007706230 Active on LSA + LSB - 24VDC
MHCP007706305 Active on LS - 24VDC
XP3, pressure relief valve, see catalogue “Valves and electronics” code P35030200
A 7 8
T
2 3 LsB
Ls
B LsA
T Ls Tp Lp T P
278 [10.94]
86 [3.38]
55 [2.16]
mm [inches]
28 IE/HPV310/03-2017
®
HSC module
End section
Code Description
HSC0003105005 No ports
P1 port - SAE 1” ¼ - 6000 psi
HSC0003105010 T1 port - SAE 1” ½ - 3000 psi
Ls1 port - BSPP ¼” - depth 13
T Ls Tp Lp T P T Ls Tp Lp T P
n°2
12.5x22
50 [1.96]
CSRV cartridge
23 154 [6.06]
25 [0.98]
[0.91]
249
230
200 [7.87]
206.5 [8.12]
50 [1.96]
68.8 [2.71]
mm [inches]
IE/HPV310/03-2017 29
®
Code Description
HSIF003105037 Interface HPV310 - HPV77
HPV 77 side
P T Lp Tp LS T
P T Lp Tp LS T
n°2
M14x2 22
25 [0.98]
23 154 [6.06] 23
[0.9] [0.9]
200 [7.87]
230 [9.05]
75 [2.95]
30 IE/HPV310/03-2017
®
Tightening
Code Elements Description
torques
HSRR003105551 1
HSRR003105552 2
HSRR003105553 3
Stay bolts kit M14x1.5 140 ± 5 Nm
HSRR003105554 4
HSRR003105555 5
HSRR003105556 6
IE/HPV310/03-2017 31
®
A
LsB
Ls
B LsA
P1
T Ls Tp Lp T P
CVR06
Lp
P
W1
MT
W2
KEC25MP
Ls
MP KEL25
MP
T Tp Lp T P
Ls P1 P
LsA
Ls
LsB
B
Ls P1 P
LsA
Ls
LsB
B
Ls P1 P
LsA
Ls
LsB
B
PA
PB
A
CSRV004101203
32 IE/HPV310/03-2017
®
Directly to tank
Tp1
LP (B)
LP (A)
P1
PB
PA
P1
PB
PA
P1
PB
PA
P1
CVR06
Lp
P
W1
MT
W2
KEC25MP
Ls
KEL25
MP
MP
IE/HPV310/03-2017 33
®
Note
34 IE/HPV310/03-2017
®