Professional Documents
Culture Documents
This symbol indicates "dangerous CAUTION : TO REDUCE THE RISK OF This symbol indicates important
voltage" inside the product that ELECTRIC SHOCK, DO NOT REMOVE instructions accompanying the product.
presents a risk of electric shock or COVER (OR BACK). NO USER SERVICEABLE
personal injury. PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
| 2 English
01 Safety Information
adjustments or performance of procedures 8. Do not install near any heat sources
other than those specified herein may result such as radiators, heat registers,
in hazardous radiation exposure. stoves, or other apparatus (including AV
CAUTION : receivers) that produce heat.
• CLASS 3B VISIBLE AND INVISIBLE 9. Do not defeat the safety purpose of
LASER RADIATION WHEN OPEN. AVOID the polarized or grounding-type plug.
EXPOSURE TO THE BEAM. (IEC 60825-1) A polarized plug has two blades with
• THIS product UTILIZES A LASER. one wider than the other. A grounding
USE OF CONTROLS OR ADJUSTMENTS type plug has two blades and a third
OR PERFORMANCE OF PROCEDURES grounding prong. The wide blade or
OTHER THAN THOSE SPECIFIED HEREIN the third prong are provided for your
MAY RESULT IN HAZARDOUS RADIATION safety. If the provided plug does not fit
EXPOSURE. DO NOT OPEN COVER AND into your outlet, consult an electrician for
DO NOT REPAIR YOURSELF. REFER replacement of the obsolete outlet.
SERVICING TO QUALIFIED PERSONNEL. 10. Protect the power cord from being
walked on or pinched particularly at
CLASS 1 LASER PRODUCT plugs, convenience receptacles, and the
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
point where it exits the apparatus.
KLASS 1 LASER APPARAT 11. Only use attachments/accessories
PRODUCTO LÁSER CLASE 1 specified by the manufacturer.
12. Use only with the cart,
Precautions stand, tripod, bracket,
or table specified by
the manufacturer, or
Important Safety Instructions
sold with the apparatus.
Read these operating instructions carefully When a cart is used, use caution when
before using the unit. Follow all the safety moving the cart/apparatus combination
instructions listed below. to avoid injury from tip-over.
Keep these operating instructions handy for 13. Unplug this apparatus during lightning
future reference. storms or when unused for long periods
1. Read these instructions. of time.
2. Keep these instructions. 14. Refer all servicing to qualified service
personnel. Servicing is required when
3. Heed all warnings.
the apparatus has been damaged in any
4. Follow all instructions. way, such as when the power-supply
5. Do not use this apparatus near water. cord or plug is damaged, liquid has
6. Clean only with a dry cloth. been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
English 3|
01 Safety Information
Glasses while moving around may cause
you to bump into objects, trip, and/or fall,
and cause serious injury.
• If you want to enjoy 3D content, connect
a 3D device (3D compliant AV receiver or
TV) to the player's HDMI OUT port using
a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT
port.
• As the video resolution in 3D play mode
is fixed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.
• Some functions such as BD Wise, screen
size adjustment, and resolution adjustment
may not operate properly in 3D play mode.
• You must use a high-speed HDMI cable
for proper output of the 3D signal.
• Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46-inch
screen, stay 138 inches (11.5 feet) from
the screen.
• Place the 3D video screen at eye level for
the best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function
properly.
• This player does not convert 2D content
into 3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
Copyright
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
English 5|
| 6 English
Contents
43 Using the View & Options Menus 57 Using the Setting Menu
44 Repeating Tracks on an Audio CD 58 Linking Your Internet Service
44 Shuffling Tracks on an Audio CD Accounts to the Player
44 Creating a Playlist from an Audio CD 59 BD-LIVE™
45 Ripping
45 Playing Photo Contents Appendix
45 Using the Tools Menu
60 Compliance and Compatibility
46 Using the View & Options Menus Notice
47 Using the Send Function 61 Copy Protection
61 Network Service Disclaimer
Network Services
62 Licence
48 Logging In to Your Samsung 64 Additional Information
Account 64 Notes
48 Before Using Movies & TV Shows or 66 Resolution according to the contents
Apps type
49 Using Movies & TV Shows 67 Digital Output Selection
50 Using Apps 68 Troubleshooting
50 The Apps Screen at a Glance 70 Repairs
50 Downloading Applications 71 Specifications
51 Starting an Application
51 Using the More Apps Screen
51 Sorting the Apps
51 Using the Options Menu Functions
54 Update Apps
55 Screen Mirroring
English 7|
| 8 English
02 Getting Started
to play. If the codes do not match, the disc
will not play.
Blu-ray Disc 3D Blu-ray Disc
The Region Number for this player is
displayed on the rear panel of the player.
Region
Disc Type Area
Code
North America, Central BD-LIVE DivX
a America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
b
Disc territories, Middle East, U.K., France, Germany,
Africa, Australia and New etc.
Zealand.
c
India, China, Russia, Central
and South Asia.
6 China
English 9|
| 10 English
02 Getting Started
2) Above 1280 x 720 : 30 frames max. Advanced
Internal MKV
-- Does not support GMC 2 or higher. SubStation Alpha
-- Supports SVAF (Top/Bottom, Side by Side). SubRip MKV
-- Supports BD MVC Spec. MPEG-4 Timed text MP4
`` Audio decoder
-- Supports WMA 10 PRO (Up to 5.1). Music File Support
-- Does not support WMA lossless audio.
File
-- Supports ADPCM IMA,MS. Type Codec Support Range
Extension
-- Does not support ADPCM(A-Law, μ-Law).
-- Does not support QCELP/AMR NB/WB. MPEG1
-- Supports vorbis (Up to 2ch). *.mp3 MPEG Audio -
-- Supports DD+ (Up to 7.1ch). Layer 3
English 11 |
02 Getting Started
Batteries for Remote Control (AAA Size) User Manual
节目源
音量 音量
– + VOL
VOL +–
三星 电视
1 2 3
4 5 6
7 8 9
碟片菜单 标题菜单
0 弹出
智能枢纽 HOME
HOME
重复
工具 信息
返回 退出
A B C D
画中画 HDMI输入
PANDORA
搜索 DIGITAL
声道 SUBTITLE
字幕 INPUT
全屏
English 13 |
STOP BUTTON
OPEN/CLOSE BUTTON
DISC TRAY
USB HOST
REMOTE CONTROL SENSOR
||NOTEs |
\\ To upgrade the player's software through the USB Host jack, you must use a USB memory stick.
\\ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the
player or the remote control. To play the movie, you must select Play Movie or Start in the disc menu, and then
press the v button on the remote control.
\\ To use Anynet+ (HDMI-CEC) function, connect an HDMI cable to HDMI 1 terminal.
When you connect the HDMI 2 terminal, Anynet+ (HDMI-CEC) function is not available.
Rear Panel
| 14 English
02 Getting Started
After setup, allows you to set the input
source on your TV. 节目源
(This button is only available in Samsung TV.)
Turn the TV on and off.
Turn the player on and off. (This button is only available for Samsung TVs.)
音量 音量
– + VOL
VOL +– TV volume adjustment.
(This button is only available for Samsung TVs.)
Press to open and close the disc tray. 三星 电视
1 2 3
Press the number buttons to operate 4 5 6
options.
7 8 9
碟片菜单 标题菜单
Use to enter the disc menu. 0 弹出 Use to enter the Popup menu/Title menu.
Use to access various audio functions on a Press to switch the Blu-ray Disc/DVD's
disc. subtitle language.
||NOTEs |
Installing batteries
\\ If the remote control does not operate properly:
-- Check the polarity +/– of the batteries.
-- Check if the batteries are drained.
-- Check if the remote sensor is blocked by obstacles.
-- Check if there is any fluorescent lighting nearby.
||CAUTION |
\\ Dispose of batteries according to local
environmental regulations. Do not put them in the
household trash.
English 15 |
Audio
Video
||NOTEs |
\\ To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to HDMI 1 terminal.
If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available.
\\ HDMI 2 terminal does not output the video signal.
\\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out
on the player to an audio system to hear audio.
\\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\\ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first
time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
\\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\\ To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2)
HDMI cable.
\\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
| 16 English
03 Connections
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your receiver.
• Best quality (Recommended)
Audio/Video
HDMI UHD
supported AV
receiver
Video
English 17 |
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your receiver.
• Best quality (Recommended)
Or
Audio Video
HDMI Receiver
||CAUTION |
\\ Do not connect the HDMI OUT 1 and HDMI OUT 2 terminals of the product with an HDMI cable.
| 18 English
• Using 7.1CH audio cables (not supplied), connect the 7.1CH ANALOG AUDIO OUT
terminals on the rear of the Player to the 7.1CH ANALOG AUDIO IN terminals of your
03 Connections
Amplifier.
• Better Quality
• Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on
the product to the Digital Optical In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
7.1 Channel
Amplifier
||NOTEs |
\\ The front left and right outputs on your SURROUND BACKplayer and 7.1 channel amplifier must be connected to hear disc menu
SURR. : SURROUND
English 19 |
Broadband
service
||NOTEs |
Broadband modem \\ If your wireless router supports DHCP, this player
(with integrated router) can use a DHCP or static IP address to connect to
Broadband the wireless network.
service \\ Set your wireless router to Infrastructure mode. Ad-
Or
hoc mode is not supported.
\\ The player supports only the following wireless
security key protocols:
Router -- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\\ Select a channel on the wireless router that is not
Broadband currently being used. If the channel set for the
service wireless router is currently being used by another
Broadband device nearby, it will result in interference and
modem communication failure.
\\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the
||NOTEs |
player will not support a connection in compliance
\\ Your router or your Internet Service Provider's with new Wi-Fi certification specifications.
policies may prevent the player from accessing
\\ Wireless LAN, by its nature, may cause
Samsung's software update server. If this occurs,
interference, depending on the operating conditions
contact your Internet Service Provider (ISP) for
(router performance, distance, obstacles,
more information.
interference by other radio devices, etc).
\\ DSL users, please use a router to make a network
connection.
| 20 English
04 Settings
configure the initial settings. Movies & TV Apps Photos,
Shows Videos &
• The OSD (On Screen Display) may change in this Music
English 21 |
Smart Features
TV Aspect Ratio
BD Wise
16:9 Original
Off
function starts on the next page. Additional
System Resolution Auto information on some of the functions is also
in the Appendix of this manual.
Movie Frame (24Fs) Auto
Support
DVD 24Fs Conversion Off
节目源
音量 音量
– + VOL
VOL +–
2. To access the menus,
三星 电视
sub-menus, and
1 Settings
options on the 2 3screen, please
refer to the 4
remote
5 control
6 illustration
below.
7 8 9
Buttons on the Remote Control Used
碟片菜单 标题菜单
0 弹出
for the Settings Menu
1
智能枢纽 HOME
HOME
重复
工具 信息
3
2 返回 退出
4
A B C D
HOME Button
画中画
PANDORA
:DIGITAL
PressSUBTITLE
to move
HDMI输入
INPUT
to the Home
1 搜索 声道 字幕 全屏
screen.
2 返回 Button : Return to the previous menu.
v (Enter) / DIRECTION Buttons :
• Press ▲▼◄► to move the cursor or
3 select an item.
• Press the v button to activate the
currently selected item or confirm a setting.
4 退出 Button : Press to exit the current menu.
| 22 English
04 Settings
Display This option outputs HDMI video at UHD
resolution. This is only available when Movie
Frame is set to Auto.
UHD Output ||NOTEs |
\\ To use this feature, you must connect the player to
a device that supports UHD resolution and you must
have content that plays at 24Fs (film speed).
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
3D Settings • If you move to the Home or Apps screen
while in 3D mode, the player will switch to 2D
automatically.
Lets you adjust the output of the player to the
TV Aspect Ratio
screen size and screen format of your TV.
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung player and a
BD Wise Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/DVD.
Set the output resolution of the HDMI video
signal to BD Wise, Auto, 1080p, 1080i, 720p or
576p/480p.
The number indicates the number of lines of video
Resolution
per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the more lines, the
higher quality.
If the player is connected to a 24Fs compatible
TV, setting the Movie Frame (24Fs) feature to
Auto lets the player adjust its HDMI output to 24
frames per second automatically for improved
picture quality.
Movie Frame (24Fs)
• You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
• Movie Frame is only available when the player
is in the HDMI 1080i or 1080p output resolution
modes.
English 23 |
Audio Lets you select the digital audio output format that is
Digital Output suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 67.
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted
PCM Downsampling
to an amplifier. Choose On if your amplifier or
receiver is not compatible with a 96Khz signal.
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
Dynamic Range dynamic range control on for Dolby Digital and
Control Dolby Digital Plus.
: Leaves the dynamic range uncompressed,
Off
letting you hear the original sound.
: Turns dynamic range control on for all
On
three Dolby formats. Quieter sounds are made
louder and the volume of loud sounds is
reduced.
Lets you select the multi-channel downmix
method that is compatible with your stereo
Downmixing Mode system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
| 24 English
04 Settings
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
• You can set the audio delay time between 0
Audio Sync msec and 200 msec.
Adjust it to the optimal setting.
||NOTEs |
\\ The audio delay time you specify may not be exact
depending on the played content.
Set HDMI audio to output through HDMI1 or
HDMI2.
Auto : Audio output will be set automatically based
on the devices connected to HDMI1 and HDMI2.
HDMI Audio Output
HDMI1 : Audio will output to the device
connected to HDMI1.
HDMI2 : Audio will output to the device
connected to HDMI2.
Lets you select the kind, size, and number of
speakers you have attached to your player, adjust
the following speaker settings for the speakers
attached, and turn the test tone on and off so you
can test the speakers.
Size : Lets you select the size of each kind of
attached speaker - Large or Small - or indicate
that you don't have a particular kind of speaker
attached by selecting None. If you select None
for a kind of speaker, that kind of speaker
will be grayed out on the Level and Distance
Speaker Settings screens.
Level : Lets you adjust the relative loudness of
each speaker from 0 dB to -6 dB.
Distance : Lets you adjust the relative distance
of each speaker from the listening position up
to 30 feet. The farther the distance, the louder
the speaker will be.
Test Tone : Lets you run the Test Tone function
so you can test your adjustments. Setting Test
Tone to On turns the Test Tone on. Setting it to
Off turns it off.
English 25 |
| 26 English
04 Settings
decreasing the boot time.
Quick Start ||NOTEs |
\\ If this function is set to On, Standby power
consumption will be increased.
You can select the language you prefer for the
On-screen menu, disc menu, audio, subtitles, etc.
Language • The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
You can connect a wireless USB keyboard or
mouse to the USB port on the front of the player.
Keyboard Settings : Lets you configure a
wireless USB keyboard connected to the player.
||NOTEs |
\\ You can use the keyboard only when a QWERTY
keyboard screen or window appears in the Web
Browser.
Mouse Settings : Lets you configure a wireless
USB mouse connected to the player. You
can use the mouse in the player's menu and
the Web Browser in the same way you use a
mouse on your PC.
`` To use a mouse with the player's menu:
Device Manager
1. Connect the USB mouse to the player.
2. Click the primary button you selected in
Mouse Settings. The Simple Menu appears.
3. Click the menu options you want.
||NOTEs |
\\ Some USB HID keyboards and mice may not be
compatible with your product.
\\ Some HID keyboard keys may not work.
\\ Wired USB keyboards are not supported.
\\ Some applications may not be supported.
\\ If a wireless HID Keyboard does not operate because
of interference, move the keyboard closer to the
player.
English 27 |
| 28 English
04 Settings
||NOTEs |
English 29 |
| 30 English
04 Settings
-- Wireless Automatic network's Security Code or Pass
Phrase.
-- Wireless Manual
Enter numbers directly using the number
-- WPS(PBC) buttons on your remote control. Enter
-- WPS(PIN) letters by selecting a letter with an arrow
When you configure the wireless network button, and then pressing v button.
connection, any wireless network devices
||NOTEs |
currently connected through the player
or, if applicable, the player's current wired \\ To view the password as you enter it, use the arrow
connection, will be disconnected. buttons to select Show Password on the right
side, and then press v button.
Wireless - Automatic
7. When done, select Done and then press
ĞĞ
1. In the Home screen, select Settings, the v button. The player verifies the
and then press the v button. network connection and then connects
2. Select Network, and then press the v to the network.
button. 8. When verification is complete, select
3. Select Network Settings, and then OK, and then press the v button.
press the v button. ||NOTEs |
4. Select Wireless in the Network Settings \\ You should be able to find the Security Code or
screen, and then press the v button. Pass Phrase on one of the set up screens you used
The player searches for and then to set up your router or modem.
displays a list of the available networks.
ĞĞ Wireless - Manual
If you have a static IP address or the
Network Settings Automatic procedure does not work, you'll
Select your network type. need to set the Network Settings values
Network type
Wireless network
Wireless
manually.
linksys3
solugen_edu#2
1. Follow the directions in Wireless -
Automatic through Step 5.
You can connect your Blu-ray
iptime23 player to the internet. Please
solugen_edu#1 select which wireless network to
use.
Refresh WPS(PBC)
2. The player searches for a network,
and then displays the connection failed
message.
3. On the bottom of the screen, select
IP Settings, and then press the v
button.
The IP Settings screen appears.
4. Select the IP Setting field, and then
press the v button.
5. Select Enter manually in the IP Setting
field, and then press the v button.
English 31 |
04 Settings
supports Wi-Fi Direct has requested to
and each other using a peer-to-peer connect. Select OK, and then press the
network, without a wireless router. v button to accept.
3. The Connecting pop-up appears,
||NOTEs |
followed by the Connected pop-up.
\\ Some Wi-Fi Direct devices may not support the When it closes, you should see the
AllShare function if connected via Wi-Fi Direct. device listed on the Wi-Fi Direct screen
If this is the case, it is advisable to change the as connected.
network connection method between devices.
Through the Player Using PBC
\\ Bluetooth transmissions can interfere with the Wi-
1. Select the Wi-Fi Direct device you want to
Fi Direct signal. Before you use the Wi-Fi Direct
connect to this player, and then press the
function, we strongly recommend that you turn off
v button. The PBC/PIN pop up appears.
the Bluetooth function of any active mobile device.
2. Select PBC, and then press the v
1. Turn on the Wi-Fi direct device and button. The PBC pop-up appears.
activate its Wi-Fi Direct function. 3. Press the PBC button on the Wi-Fi
2. In the Home screen, select Settings, Direct device within 2 minutes.
and then press the v button. 4. The Connecting pop-up appears,
followed by the Connected pop-up.
3. Select Network, and then press the v
When it closes, you should see the
button. device listed on the Wi-Fi Direct screen
4. Select Wi-Fi Direct, and then press the as connected.
v button. Through the Player Using a PIN
The Wi-Fi Direct devices that you can
connect appear. 1. Select the Wi-Fi Direct device you want
to connect to this player, and then press
5. You have three ways to complete the
the v button. The PBC/PIN pop up
Wi-Fi connection: appears.
• Through the Wi-Fi device. 2. Select PIN, and then press the v
• Through the player using PBC. button. The PIN pop-up appears.
• Through the player using a PIN. 3. Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-
Each is covered below.
Fi Direct device you want to connect.
Through the Wi-Fi Device 4. The Connecting pop-up appears,
followed by the Connected pop-up.
1. On the Wi-Fi device, follow the When it closes, you should see the
procedure on the device for connecting device listed on the Wi-Fi Direct screen
to another Wi-Fi Direct device. See the as connected.
device's user manual for instructions. ||NOTEs |
\\ The current wired or wireless network connection will
be disconnected when you use the Wi-Fi Direct function.
\\ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.
English 33 |
The Software Update menu allows you You can use Update Now to update the
to upgrade the player's software for software through your network connection
performance improvements or additional or by using a USB flash drive. The network
services. instructions are below. The USB flash drive
instructions are on the next page.
• Never turn the player off or back on manually
1. Select Update Now, and then press the
during the update process.
v button.
1. In the Home screen, select the Settings,
The Update now pop-up appears.
and then press the v button. 2. The product searches on line for the
2. Select Support, and then press the v
latest software version.
button. 3. If it finds a new version, the Update
3. Select Software Update, and then
Request pop-up appears.
press the v button. 4. Select OK. The product upgrades the
4. To download update software and
software, turns off, and then turns on
automatically.
update now, select Update Now, and
then press the v button. See Update 5. If you do not select OK or Cancel in
Now on this page for details. one minute, the product stores the new
5. To let the product download update
upgrade software. You can upgrade the
software later using Auto Update.
software automatically when available,
select Auto Update, and then press the 6. If you select Cancel, the product
v button. See Auto Update on page cancels the upgrade.
35 for details. ||NOTEs |
||NOTEs | \\ When the system upgrade is done, check the
\\ The upgrade is complete when the player turns off, software details in the Product Information section
and then turns on again by itself. of the Contact Samsung screen.
\\ Samsung Electronics shall takes no legal \\ Do not turn off the player during the Software
responsibility for player malfunction caused by Update. It may cause the player to malfunction.
an unstable Internet connection or consumer
negligence during a software Update.
\\ If you want to cancel the upgrade while the
upgrade software is downloading, press the v
button.
\\ When a system upgrade is in progress, "UPDATE"
is displayed on the front panel.
| 34 English
04 Settings
when it is in Auto Update mode. 10. Copy the folder to a USB flash drive.
In Auto Update mode, the player is off, but 11. Make sure no disc is inserted in the
its Internet connection is active. This allows product, and then insert the USB flash
the player to download upgrade software drive into the USB port of the product.
automatically, when you are not using it. 12. In the product’s menu, go to Settings >
1. Press the ▲▼ buttons to select Auto Support > Software Update.
Update, and then press the v button. 13. Select Update Now.
2. Select On or Off. 14. The product searches for the software
If you select On, the player will on the USB drive. When it finds the
automatically download new upgrade software, the Update Request pop-up
software when it is in Auto Update mode appears.
with the power off. If it downloads new 15. Select OK. The product upgrades the
upgrade software, the player will ask you software, turns off, and then turns on
if you want to install it when you turn the automatically.
player on.
||NOTEs |
||NOTEs |
\\ There should be no disc in the player when you
\\ To use the Auto Update Mode Upgrade function,
upgrade the software using the USB jack.
your player must be connected to the Internet.
\\ When the system upgrade is done, check the
< By USB > software details in the Product Information section
of the Contact Samsung screen.
1. Visit www.samsung.com.
\\ Do not turn off the player during the Software
2. Click SUPPORT on the top right of the
Update.
page.
It may cause the player to malfunction.
3. Enter the product's model number
\\ Software Updates using the USB jack must be
into the search field. As you enter the
performed with a USB flash memory stick only.
model number, a drop down will display
products that match the model number.
4. Left click your product's model number
in the drop down list.
5. On the page that appears, scroll down
to and then click Firmware Manuals &
Downloads.
6. Click Firmware in the centre of the page.
7. Click the ZIP button in the File column
on the right side of the page.
8. Click Send in the first pop-up that
appears. Click OK in the second pop-up
to download and save the firmware file
to your PC.
English 35 |
m80
Photos
Videos
tray.
to get recommended apps.
Web Browser Settings
| 36 English
05 Media Play
5. Select a file to view or play, and then 8. Press the 返回 button to exit a folder
press the v button. or the 退出 button to return to Home
6. Press the 返回 button to exit a folder or screen.
the 退出 button to return to the Home 9. Go to pages 40~47 for instructions
screen. that explain how to control playback of
7. Go to pages 40~47 for instructions videos, music, and pictures on a USB
that explain how to control playback of device.
videos, music, and pictures on a USB ||NOTEs |
device. \\ If you insert a disc when playing a USB device, the
Method 2 device mode changes to "Disc" automatically.
English 37 |
| 38 English
05 Media Play
PC Blu-ray Disc Player PC Blu-ray Disc Player
English 39 |
You can control the playback of video content located on a Blu-ray/DVD disc, USB, mobile
音量 音量
1 2 3
Buttons on the Remote Control used for Video Playback
4 5 6
7 8 9 Using the disc menu, title menu, popup
menu, and title list
碟片菜单 标题菜单
0 弹出
05 Media Play
not support indexing, you will playback.
not be able to use the Search -- Title : Choose to repeat a
Search Scene
Scene function. selected title.
\\ If you are using the Allshare function -- Chapter : Choose to repeat a
after connecting to a computer specific chapter.
through your network, Search -- Repeat A-B : Choose to repeat
Scene may not be supported. a specific section.
If there is more than one movie on 1. Press the ▲▼ buttons to
the disc or device, select to start a select repeat A-B, and then
Repeat Mode press the v button.
different title.
1. Select Search Titles, and then 2. Press the v button at the
Search Titles point where you want repeat
press the v button.
play to start (A). Let the movie
2. Use the ▲▼ buttons to select
play.
a title, and then press the v
button. 3. Press the v button at the
point where you want repeat
Select to play the chapter of your play to stop (B).
choice.
||NOTEs |
1. Select Search Chapters, and
Search \\ You must set point (B) at least
then press the v button.
Chapters 5 seconds of playing time after
2. Use the ▲▼ buttons to select point (A).
a chapter, and then press the
v button. Select to set the picture mode.
-- Dynamic : Increases sharpness
Select to play the movie from a
and brightness.
selected time point.
-- Standard : Choose this setting
1. Select Search Time Bar, and for most viewing applications.
then press the v button. -- Movie : The best setting for
2. Using the number buttons, watching movies.
enter the time point you want Picture Mode -- User : Lets you adjust the
to go to, and then press the sharpness and noise reduction
Search Time
v button. function respectively.
Bar
||NOTEs | ||NOTEs |
\\ You can also use the ◄► \\ When you use the BD wise
buttons to advance or rewind function, this menu will not
the movie. appear.
The movie advances or rewinds
one minute each tme you press Select to set the desired audio
Audio
the ◄ ► buttons. language.
English 41 |
| 42 English
You can control the playback of music Using the View Menu
05 Media Play
content located on a DVD, CD, USB, mobile
device or PC. On the music file playback screen, use the
Depending on the disc or contents, some of ▲▼◄► buttons to select View, and then
the functions described in this manual may press the v button.
not be available.
Displays all the music tracks on
节目源
Track
Buttons on the Remote Control used the media or storage device.
for Music Playback – 音量 音量
Displays all music on the media or
VOL+ VOL
+–
Album
三星 电视 storage device by album.
1 2 3 Displays all the the music files on
1 4 5 6 Artist the media or storage device by
7 8 9 artist.
Displays all the music on the
碟片菜单 标题菜单
0 弹出
Genre
2 4 media or storage device by genre.
Displays all the folders on the
5 Folder
智能枢纽 HOME
media or storage device.
3 HOME 6
||NOTEs |
重复
English 43 |
off off
TRACK 009
TRACK 010
03:04
04:02
||NOTEs |
\\ You can create a playlist with up to 99 tracks on
Audio CDs (CD-DA).
\\ If you have created a playlist, Play Selected is
replaced by Edit Playlist on the Options menu.
\\ On the Selection Play screen, you can also choose
Select All, Clear All, and Cancel.
| 44 English
05 Media Play
the Play button, and then press the v button,
9. If you want to cancel ripping, press the
all tracks will appear on the Music Playback
screen, and the product will begin to play all v button and then select Yes. Select
tracks from Track 001. No to continue ripping.
-- Use Clear All to deselect all selected tracks 10. When ripping is complete, the
at once. Then, select individual tracks or use "Successfully Ripped." message
Select All to select all the tracks, and then press appears. Press the v button.
the 返回 button on your remote control. If you 11. Press the 返回 button or select Cancel,
do not use Select All or select individual tracks, and then press the v button to go
the Playlist will not change. back to the Playback screen.
-- Cancel cancels any changes you made on ||NOTEs |
the Play Select screen. When you return to the \\ This function is not available with DTS Audio CD.
Playback screen, the Playlist will be unchanged.
\\ This function may not be supported by some discs.
Ripping \\ Ripping encodes music to the .mp3 format at
192kbps.
1. Insert a USB device into the USB jack
on the front of the product. \\ On the Ripping screen, you can also choose Select
All and Clear All.
2. With the Playback screen displayed,
-- Use Select All to select all tracks and press the
select the Options and then press the
v button. The Options menu appears. v button. This cancels your individual track
selections.
3. Use the ▲▼ buttons to select Ripping,
-- Use Clear All to deselect all selected tracks at
and then press the v button. The
Ripping screen appears. once.
4. Use the ▲▼ buttons to select a track,
and then press the v button. A check Playing Photo Contents
appears to the left of the track.
You can play photo contents located on a
5. Repeat Step 4 to select and check
DVD, USB, mobile device or PC.
additional tracks.
6. To remove a track from the list, move to
Using the Tools Menu
the track, and then press the v button During playback, press the 工具 button. A
again. series of icons appears at the bottom of the
The check on the track is removed. screen. The icons, which are shown from left
7. When done, select the Rip button using to right on the screen, are shown in the same
the ▲▼ buttons, and then press the v order, from top to bottom, in the table below.
button. The Rip pop-up appears.
Previous Select to move to the previous picture.
8. Use the ▲▼ buttons to select the device
to store the ripped files to, and then Next Select to move to the next picture.
press the v button. Start / Stop
Select to play/pause the slide show.
Slide Show
English 45 |
||NOTEs |
\\ Depending on the disc or storage device, the View
menu may differ or not be shown.
| 46 English
05 Media Play
1. With the Photo Playback screen
displayed, select the Options button,
and then press the v button. The
Options menu appears.
2. Use the ▲▼ buttons to select Send,
and then press the v button. The
Selection screen appears.
3. Use the ▲▼ buttons to select a picture,
and then press the v button. A check
appears to the left of the picture.
4. Repeat Step 3 to select and check
additional pictures.
5. To remove a picture from the list, move
to the picture, and then press the v
button again.
The check on the picture is removed.
6. When done, press the ▲▼ button to
select Send, and then press the v
button.
The Send pop-up appears listing the on-
line sites or devices that you can send
the photos to.
7. Select a destination, and then press the
v button.
8. If you are sending the photos to an on-
line site, the site starts. Log in and follow
the directions on the screen.
||NOTEs |
\\ To send photos to an on-line site you must have an
account with that site.
English 47 |
| 48 English
06 Network Services
to Step 4. free-of-charge Films and TV shows and view
2. If you selected Movies & TV Shows, them on your TV.
the Smart Hub pop-up appears asking Movies & TV Shows
if you want to set up Smart Hub. Select Featured Recommended
English 49 |
1
1
2 3 4 5
Samsung TV
4 to the account. Press the RED (A) button on your
remote to log in.
My Apps
2
press the RED (A) button again, and then select
Change Account Information in the pop-up that
More Apps
3 appears. On the Change Account information page,
select Register Card, press the v button, and
then follow the directions on the screen.
Recommended : Displays recommended \\ You can also access and download apps from
1
contents managed by Samsung.
the categories listed on the left of the screen. For
My Apps : Displays your personal gallery of instructions, see Step 4.
2
applications modifiable on the More Apps screen.
| 50 English
06 Network Services
press the 返回 button. In either case, by Date downloaded, Recently opened,
the icon for the app will appear on the and Title.
Apps screen. • Apply a number of Options Menu functions
4. To see additional apps, use the ▲▼◄► to the apps listed in the My Apps section of
buttons to move to the category list on the Apps screen including updating apps,
the left side of the screen. moving apps into a folder, deleting the
5. Use the ▲▼ buttons to select a apps from My Apps, and locking the apps.
category. Each time you move the • Start apps.
highlight to another category, a different
set of applications appears on the right. Sorting the Apps
6. Use the ► button to move to the To sort the apps on the More Apps screen,
applications and the ▲▼◄► buttons to follow these steps:
move from app to app.
1. On the Home screen, select Apps, and
7. To see more information about an app, then press the v button.
select it, and then press the v button.
2. On the Apps screen, use the ▼ button
8. To download the app, follow the to move to the More Apps hotspot at
directions in Steps 2 and 3. the bottom of the page, and then press
the v button.
Starting an Application
3. On the More Apps screen, use the ▲►
1. Select Apps on the Home screen, and buttons to move to View at the top of the
then press the v button. screen, and then press the v button.
2. On the Apps screen, use the ▲▼◄► 4. In the drop down that appears, select
buttons to select an app, and then press Date Downloaded, Recently Opened,
the v button. The app starts. or Title, and then press the v button.
The apps on the More Apps screen are
Using the More Apps Screen sorted by the criteria you have chosen.
1/9
English 51 |
| 52 English
Create Folder lets you create a folder on the \\ To select all the downloaded apps, select Select
More Apps screen into which you can put All at the top right of the screen, and then press
06 Network Services
apps. the v button. To deselect all the apps, select
Deselect All at the top right of the screen, and
1. On the More Apps screen, use the ▲► then press the v button.
buttons to go to Options at the top
of the screen, and then press the v 6. When done, select Select folder at the
button. top of the screen, and then press the v
button. The Select folder pop-up appears.
2. Select Create Folder, and then press
the v button. The Set Folder Name 7. In the Select folder pop-up, use the ▲▼
pop-up appears. buttons to select the folder you want
3.
to move the apps you selected to and
Press the v button. The keyboard
then press the v button.
appears.
8. The Apps Moved pop up appears. Press
4. Select the Clear button on the right
the v button.
side, and then press the v button to
remove Folder 1 from the entry field. 9. To open a folder, use the ▲▼◄►
Then, using the keyboard, enter the buttons to highlight the folder, and then
name you want to apply to the folder. press the v button.
5. When finished, select the Done button Rename Folder
on the right side, and then press the v
button. Rename Folder lets you rename an existing
The pop-up reappears. folder.
6. Select OK, and then press the v 1. On the More Apps screen, use the ▲►
button. buttons to go to Options at the top
The new folder appears in the list of of the screen, and then press the v
apps on the left side of the screen. button.
Move to Folder 2. Select Rename Folder, and then
press the v button. The Rename
Move to Folder lets you move apps to the Folder screen appears, and a folder is
folder of your choice. highlighted.
1. On the More Apps screen, use the ▲► 3. User the ▲▼◄► buttons to highlight
buttons to go to Options at the top a folder of your choice, and then press
of the screen, and then press the v the v button. The Rename pop-up
button. appears.
2. Select Move to Folder, and then press 4. Press the v button. The keyboard
the v button. The Move to Folder appears.
screen appears. 5. Enter the new name for the folder. When
3. Use the ▲▼◄► buttons to move to an finished, select Done on the right side,
app, and then press the v button to and then press the v button. The
select the app. A check appears in the Rename pop-up reappears displaying
upper left corner of the app. the new name.
4. To deselect an app, press the v 6. Select OK, and then press the v
button. The check disappears. button. The folder is renamed.
5. Repeat Step 3 to select additional apps. 7. Select Close on the right side of the
screen, and then press the v button.
English 53 |
||NOTEs |
\\ To select all the downloaded apps, select Select
All at the top right of the screen, and then press
the v button. To deselect all the apps, select
Deselect All at the top right of the screen, and
then press the v button.
6. After you have made all your selections,
select Delete at the top of the screen,
and then press the v button. The
Delete pop-up appears.
7. Select Yes, and then press the v
button. All the apps you selected are
deleted.
||NOTEs |
\\ You cannot immediately delete a locked app or
folder. If you select a locked app or folder to delete,
when you perform Step 7, the Lock Service pop-
up appears. Enter the Security PIN into the pop-
up, and then press the v button. The lock will be
released and the app or folder will be deleted.
| 54 English
06 Network Services
the screen of your smart phone or android Browser application.
tablet on the TV you have connected to the Select Web Browser on the Home screen,
Blu-ray player. and then press the v button.
Caps 1 2 3 4 5 6 7 8 9 0 : Clear
q w e r t y u i o p ^ *
a s d f g h j k l ~ @ !
123#& Done
z x c v b n m , . ? - Cancel
ENG www. .com /
| 56 English
06 Network Services
letters, numbers, symbols, and punctuation. Note Disable and down without dragging the
that the wireless keyboard will work only when the Grabbing scroll bar.
keyboard popup appears and can only be used to The Grabber function is only
enter letters, numbers, symbols, and punctuation.
available in Pointer Browsing.
Options on the Keyboard Pop-Up Lets you restrict your children’s
To access the keyboard pop-up options, access to inappropriate web pages
highlight the button on the bottom left of by allowing access only to the web
the keyboard, and then press the v button. sites you have registered.
Every time you access this
Select the language for the function, the PIN screen appears.
Language keyboard. You can select English, The first time you access this
French, Russian, etc. function, enter the default PIN,
The keyboard will suggest 0000 using the number buttons on
Recommended your remote.
recommended words as you enter text.
Text
You can turn this function On or Off. You can change the PIN using the
The keyboard will predict the next Reset password for the Approved
letter as you enter letters. The Sites function. See below.
predictions appear in a ring around Approved Sites Feature : Turns
Predict Next
the letter you have just entered. Approved the Approved Sites function on or
Letter
You can select a predicted letter Sites off.
or move to another letter. You can Reset password for Approved
turn this function On or Off. Sites : Change the Approved Sites
password.
Using the Setting Menu Add current site : Lets you add
The Setting menu contains functions that the currently displayed web site to
control how the Browser operates and the Approved Sites list.
Browser security functions. To open the Manage Approved Sites : Lets
Setting menu, highlight the icon in the you key in URLs to add to the
Control Panel, and then press the v Approved Sites List and delete
button. To select an option in the setting sites from the Approved Sites list.
menu, highlight the option, and then press If you turn this function on and
the v button.
have not added any sites to the
Approved Sites list, you will not be
http://www.samsung.com 100%
Close
English 57 |
||NOTEs |
\\ Depending on the web site, some of the Web
Browser Setting functions may not be activated.
Functions that are not activated are greyed out and
cannot be used.
| 58 English
06 Network Services
network, you can enjoy various movie-
related service contents available on BD-
LIVE compliant discs.
1. Attach a USB flash memory drive to the
USB jack on the front of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BD-
LIVE services.
2. Select Settings on the Home screen,
and then press the v button.
3. Select Network, and then press the v
button.
4. Select BD-Live Settings, and then
press the v button.
5. Select BD Data Management, and then
press the v button.
6. Select Select Device, and then press
the v button.
7. Select USB device, and then press the
v button.
8. Insert a Blu-ray Disc that supports BD-
LIVE.
9. Select an item from the list of BD-LIVE
service contents provided by the disc
manufacturer.
||NOTEs |
\\ The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
English 59 |
| 60 English
07 Appendix
system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback, analog signal output, etc., of AACS protected
contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used
as content protection system for Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care centre.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibited use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Centre at http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer
Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is
prohibited.
English 61 |
Licence
• Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are registered trademarks of Dolby Laboratories.
• DivX
-- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video.
Visit divx.com for more information and software tools to convert your files into DivX videos.
-- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence. Covered by one or more of the following U.S.
patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.
| 62 English
07 Appendix
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners.
English 63 |
Notes
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 (STOP) button
once. The movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5
(STOP) button once. The Home screen menu appears. Press the 5 (STOP) button
again, then select 3D Settings in the Blu-ray menu.
• Depending on the content and the position of the picture on your TV screen, you may
see vertical black bars on the left side, right side, or both sides.
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of your
TV screen, the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides
of picture).
BD Wise (Samsung Players only)
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.
• If the player is connected to a device that does not support BD Wise, you can not use
the BD Wise function.
• For proper operation of BD Wise, set the BD Wise option of both the player and the TV to On.
Settings
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your player is connected to an AV
receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of
your Digital Output selections (PCM or Bitstream).
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output downsampled
audio through the optical digital output.
• HDMI
-- If your TV is not compatible with compressed multi-channel formats (Dolby Digital,
DTS), the player may output PCM 2ch downmixed audio even though you selected
Bitstream (either Reencoded or Unprocessed) in the setup menu.
-- If your TV is not compatible with PCM sampling rates over 48kHz, the player may
output 48kHz.
| 64 English
07 Appendix
certify the disc, the server uses the transmitted data to check if the disc is valid and
sends the certificate back to the player.
• The Internet connection may be restricted while you are using BD-LIVE contents.
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect the
USB device in the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are
Settings supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on
conditions.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to
the user manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not
contain any BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the
languages that are encoded on the disc. This function or certain languages may not
be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio
soundtrack in English.
Selecting the Subtitle Language
Media Play • Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle
language in the Disc Menu. Press the 碟片菜单 button.
• This function depends on the selection of subtitles that are encoded on the disc and
may not be available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray
Disc has a BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles are displayed respectively.
• If you press the 字幕 button on the remote control, the subtitle bar appears.
Press the 返回 button to remove the subtitle bar.
English 65 |
Contents Type
DVD
Setup
BD Wise 576i/480i
UHD Output : Auto 2160p@24F
DVD 24Fs Conversion : Auto
Movie Frame : Auto UHD Output : Off 1080p@24F
Auto
DVD 24Fs Conversion : Off Max. Resolution of TV input
Movie Frame : Off Max. Resolution of TV input
Movie Frame : Auto (DVD 24Fs Conversion : Auto )
1080p@24F
※ 1080p & 1080i only
1080p 1080p@60F
1080i 1080i
720p 720p
576p/480p 576p/480p
||NOTEs |
\\ If the TV you connected to the player does not support Movie Frame or the resolution you selected, the
message "If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous
resolution. Do you want to change the resolution?" appears. If you select Yes, the TV's screen will go blank for
15 seconds, and then the resolution will revert to the previous resolution automatically.
\\ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the
@ button on the top of the player for more than 5 seconds. The initialization message appears on the screen,
and the power will turn off automatically. When you turn your product on again, all the settings will be reset.
Run the Initial Settings procedure again. Then, go to Settings > Display > Resolution in the Menu, and select
the correct resolution for your TV.
\\ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format)
only. Resetting does not affect your network settings, so you should be able to skip Network Setup and
Software Update.
\\ When the factory default settings are restored, all stored user BD data will be deleted.
\\ The Blu-ray Disc must have the 24 frame feature for the player to use the Movie Frame (24Fs) mode.
| 66 English
Bitstream Bitstream
Bitstream
07 Appendix
Setup PCM (Re-encoded (Re-encoded
(Unprocessed)
DTS) Dolby D)
HDMI HDMI
HDMI HDMI
supported AV supported AV
Connection supported Optical supported Optical
receiver or receiver or
AV receiver AV receiver
Optical Optical
PCM Up to PCM PCM 2ch PCM PCM 2ch DTS re- Re-encoded
7.1ch encoded Dolby Digital *
Up to PCM
Dolby Digital 7.1ch PCM 2ch Dolby Dolby DTS re- Re-encoded
Digital Digital encoded Dolby Digital *
Dolby Digital Up to PCM PCM 2ch Dolby Digital Dolby DTS re- Re-encoded
Plus 7.1ch Plus Digital encoded Dolby Digital *
Dolby Up to PCM PCM 2ch Dolby Dolby DTS re- Re-encoded
Audio TrueHD 7.1ch TrueHD Digital encoded Dolby Digital *
Stream on Up to PCM DTS re- Re-encoded
Blu-ray Disc DTS 6.1ch PCM 2ch DTS DTS encoded Dolby Digital *
DTS-HD High Up to PCM DTS-
Resolution PCM 2ch HD High DTS DTS re- Re-encoded
Audio 7.1ch Resolution encoded Dolby Digital *
Audio
DTS-HD Up to PCM PCM 2ch DTS-HD DTS re- Re-encoded
Master Audio 7.1ch Master DTS encoded Dolby Digital *
Audio
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Audio Up to PCM PCM 2ch Dolby Dolby
Stream on Dolby Digital 5.1ch Digital Digital Dolby Digital Dolby Digital
DVD Up to PCM PCM 2ch
DTS 6.1ch DTS DTS DTS DTS
PROBLEM SOLUTION
No operation can be performed with the • Check the batteries in the remote control. They may need
remote control. replacing.
• Operate the remote control at a distance of no more than 6.1m
from the player.
• Remove the batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the remote
control to reset it. Reinstall the batteries and try to operate the
remote control again.
The disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
The disc Menu does not appear. • Ensure that the disc has disc menus.
The prohibition message appears on the • This message appears when an invalid button is pressed.
screen. • The Blu-ray Disc/DVD's software doesn't support the feature (e.g.,
angles).
• You've requested a title or chapter number or search time that is
out of range.
Play mode differs from the Setup Menu • Some of the functions selected in the Setup Menu may not work
selection. properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be changed. • The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio. • Make sure you have selected the correct Digital Output in the
Audio Options Menu.
The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the @ button (on top panel) for more than 5 seconds with no
disc inside. The initialization message appears on the screen, and
the power will turn off automatically. When you turn your product
on again, all the settings will be reset.
• When the factory default settings are restored, all stored user BD
data will be deleted.
Forgot password. • Press the @ button (on top panel) for more than 5 seconds with no
disc inside. The initialization message appears on the screen, and
the power will turn off automatically. When you turn your product
on again, all the settings will be reset.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD
data will be deleted.
| 68 English
The picture is noisy or distorted. • Make sure that the disc is not dirty or scratched.
07 Appendix
• Clean the disc.
No HDMI output. • Check the connection between the TV and the HDMI jack of the
player.
• Check if your TV supports the 576p/480p, 720p, 1080i, 1080p or
2160p HDMI input resolution.
Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
If you experience other problems. • Go to the table of contents and find the section of the user manual
that contains information about the feature you are having the
problem with, and then follow the procedure again.
• If you still cannot resolve the problem, please contact your nearest
Samsung authorised service centre.
AllShare function
I can see folders shared through • AllShare only shows Video, Photo, and Music files. Other types of
AllShare, but I cannot see the files. files are not displayed.
The AllShare connection between the • IP addresses within the same subnetwork should be unique.
player and the PC is unstable. If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
English 69 |
When using the BD-LIVE service, an • The memory device must have at least 1GB of free space to
error occurs. accommodate the BD-LIVE service.
You can check the available size in BD Data Management. (See
page 26)
||NOTEs |
\\ When the factory default settings are restored, all stored user BD data will be deleted.
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the
product.
2. You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
| 70 English
Weight 1.7 Kg
07 Appendix
Dimensions 430 (W) X 201 (D) X 43 (H) mm
General
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10 % to 75 %
Type A USB 2.0
USB
DC output 5V 500mA Max.
2D : 2160p, 1080p, 1080i, 720p, 576p/480p
Video
HDMI 3D : 1080p, 720p
Audio PCM, Bitstream
Front Left/Front Right, Centre, Subwoofer, Surround
7.1 Channel Left/Surround Right, Surround Back Left/Surround
Audio Output
Back Right
Digital Audio Output Optical
Ethernet 100BASE - TX Terminal
Wireless LAN Built-in
WEP (OPEN/SHARED)
Network
Security WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC) Supported
English 71 |
用影像记录一切可能
感谢您购买此款 Samsung 产品。
为了获得更完善的服务,请在以下网站中注册您的产品
www.samsung.com/register
保留备用
警告
有电击的危险,请勿
打开。
不要将本产品安装在狭窄的空间 当使用屏蔽电缆和接头将装置连
中,例如书橱或类似的装置中。 接至其他设备时,本产品符合 CE
规定。要防止来自收音机和电视
警告 等电子设备的电磁干扰,请使用
为避免可能导致火患或电击危险 屏蔽电缆和接头进行连接。
的损害,请勿将此产品放在在雨
重要说明
中或潮湿环境下。
本设备的电源插头配备含保险丝
警告 的压模插头。保 险丝的值在插头
Blu-ray 光盘播放机使用不可见的 的插脚面指示。如果需要更换,
激光光线,如果被其直射,可能 必须使用经过 BS1362 核准的额
会处于危险的辐射之中。请务必 定值相同的保险 丝。
根据指示正确操作 Blu-ray 光盘 如果保险丝盖子可拆,那么在没有
播放机。 保险丝盖子的情况下,切勿使用插
头。如果需要替换保险丝盖子,
警告 则其颜色必须与插头的插脚面颜色
本产品使用激光。 如果不按此处 相同。替换盖子可向经销商购买。
规定的控制、调校或操作过程进行 如果插头不适合家中的电源点,
操作,则可能会处于危险的辐射之 或者电线不够长,不能连接到电
中。不要打开盖子,也不要自行修 源点,那么必须购买合适的获得
理。请让合格的人员进行维修。 安全批准的延长线,或者咨询经
| 2 中文
01 安全信息
取出保险丝,然后安全地弃置 重要安全说明
插头。不要将插头连接至电源插 使用装置前请仔细阅读这些操作
孔,因为裸露的活动电线存在电 说明。请按照下面列出的安全说
击的风险。 明操作。
要使装置与电源断开连接,必须 请将这些操作说明妥善保管,以
从电源插座拔出插头,因此,电 供将来参考。
源插头必须易于操作。 1. 请阅读这些说明。
附带提供本用户手册的产品装置
2. 请妥善保管这些说明。
获得特定第三方的特定知识产权
许可。 3. 注意所有警告。
4. 请遵循所有说明。
1 类激光产品
5. 切勿在近水处使用本设备。
本压缩光盘播放器定为 1 类激光 6. 清洁时只使用干布。
产品。如果您未按本手册的规定 7. 请勿堵塞任何通风口。根据
使用控制、调节或执行操作,则 厂商说明进行安装。
可能会遭受危险的激光辐射。
8. 不要将本设备安装在任何靠近
警告:
热源例如电暖炉、暖气片、
• 打开产品后,会发出 3B 类可 电炉,或其它(包括 AV 接收
见或不可见激光辐射。应避免 器)会产生热气的设备。
受到光束照射 (IEC 60825-1)
9. 请勿忽略极化或接地型插头的
• 本产品使用激光。如果您未按
安全保护用途。极化型插头具
本手册的规定使用控制、调节
有两边,有一边较另一边宽。
或执行操作,则可能会遭受
接地型插头具有两边和第三端
危险的激光辐射。不要打开护
接地插脚。该宽边或第三端插
盖,也不要自行修理。请让合
脚专为您的安全而提供。如果
格的人员进行维修。
所提供的插头不适用于您的插
CLASS 1 LASER PRODUCT 座,请联系电工更换旧插座。
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE 10. 保护电线以防践踏或被挤压,
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1 特别是插头处、便利插座处以
及设备接出处的电线。
中文 3|
01 安全信息
关,并从墙上插座拔下电源插 镜、护目镜等等)。
头。然后,与您最近的客户服务 • 走动时,不要使用 3D 功能或
中心联系,以获得技术协助。不 3D 主动式眼镜。如果走动时使
要使用产品。照常使用产品可能 用 3D 功能或 3D 主动式眼镜,
会导致火灾或电击。 可能会导致撞伤、绊倒和或跌
| 警告 | 落,并且可能导致严重伤害。
\ 切勿将电池置于火中。 • 如果要欣赏 3D 内容,请使用
高速 HDMI 电缆将 3D 设备
\ 切勿使电池短路、过热,或拆解电池。
(符合 3D 的 AV 接收器或电
\ 如未正确放置电池,可能会有爆炸的 视)连接到播放器的 HDMI 输
危险。只能放置相同或同等类型的电 出端口。戴上 3D 眼镜,然后
池。 播放 3D 内容。
• 3D 信号只能使用 HDMI 电缆通
使用 3D 功能 过 HDMI 输出端口输出。
3D 图像的重要健康和安全信息。 • 因为在 3D 播放模式下,视频
在使用 3D 功能之前,请阅读并了 分辨率是根据原始 3D 视频的
解下列安全信息。 分辨率固定的,不能根据偏好
• 在观看 3D 电视时,一些观看 更改分辨率。
者可能会觉得不适,例如头 • 一些功能(例如 BD Wise、屏幕
晕、恶心和头痛。 大小调整和分辨率调整)在 3D
如果您有任何此类症状,请停 播放模式下可能无法正常工作。
止观看 3D 电视,取下 3D 主动 • 必须使用高速 HDMI 电缆才能
式眼镜并休息。 正确输出 3D 信号。
• 长时间观看 3D 图像可能会导 • 观看 3D 图像时,至少与电视保
致视觉疲劳。如果您感觉视疲 持屏幕 3 倍远的距离。例如,
劳,请停止观看 3D 电视,取 如果屏幕为 46 英寸,应当与屏
下 3D 主动式眼镜并休息。 幕保持 138 英寸(3.5 米)。
• 尽责的家长应该监督使用 3D • 将 3D 视频屏幕与眼睛同高,
功能的儿童。 可获得最佳 3D 画面。
如果小孩报告视觉疲劳、头 • 如果将播放器连接到一些 3D
痛、头晕或恶心,请让小孩停 设备,3D 效果可能无法正常起
止观看 3D 电视并休息。 作用。
中文 5|
版权
© 2013 Samsung Electronics
Co.,Ltd.
版权所有;如果没有得到
Samsung Electronics Co.,Ltd. 的
书面允许,严禁转化或复制本用户
手册的任何部分或整本用户手册。
| 6 中文
目录
警告 接收器
3 注意事项 25 方法 3 连接至音频系统
3 重要安全说明 (7.1 声道放大器)
4 光盘储藏和管理 25 方法 4 连接至支持杜比数码
4 处理注意事项 或 DTS 解码器的 AV 接收器
5 使用 3D 功能 26 连接至网络路由器
6 版权 26 有线网络
26 无线网络
开始使用
设置
9 光盘和格式兼容性
9 播放器可播放的光盘类型和 27 初始设置过程
内容 27 主屏幕
10 播放器无法播放的光盘类型 28 访问设置屏幕
10 地区代码 28 遥控器上用于“设置”菜单
11 播放器可播放光盘的徽标 的按钮
12 支持的格式 29 “设置”菜单功能
16 附件 39 网络和 Internet
17 前面板 39 配置网络连接
18 后面板 42 Wi-Fi 直连
19 遥控器 43 升级软件
19 遥控器一览 44 立即更新
44 自动更新
连接
媒体播放
21 连接至电视
23 连接至音频系统 46 播放商业光盘
23 方法 1 连接至支持 HDMI 46 播放 USb 设备上的文件
UHD 的 AV 接收器 48 播放含有用户烧录内容的光盘
中文 7|
| 8 中文
02 开始使用
播放器可播放的光盘类型和内容
媒体 光盘类型 详细信息
Blu-ray 光盘
3D Blu-ray 以 BD-RE 格式录制的 BD-ROM 或 BD-RE/-R。
光盘
DVD-VIDEO
视频
DVD-RW DVD-VIDEO、已录制且已最终化的已录制 DVD+RW/DVD-
DVD-R RW(V)/DVD-R/+R,或者包含 DivX、MKV、MP4 内容的
DVD+RW USB 存储介质。
DVD+R
CD-
RW/-R、
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 存储介质
音乐 DVD-
上录制的包含 MP3 或 WMA 内容的音乐。
RW/-R、
BD-RE/-R
CD-
RW/-R、
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 存储介质
照片 DVD-
上录制的包含 JPEG 内容的照片。
RW/-R、
BD-RE/-R
| 备注 |
\ 由于光盘类型或录制条件,播放器可能无法播放某些 CD-RW/-R 和 DVD-R。
\ 如果未以 DVD 格式正确录制 DVD-RW/-R,则它将不可播放。
\ 如果内容在录制到 DVD-R 上时的采样率超过 10 Mbps,那么播放器将无法播放
此内容。
\ 如果内容在录制到 BD-R 或 USB 设备上时的采样率超过 25 Mbps,那么播放器
将无法播放此内容。
\ 对于某些类型的光盘,或者使用特定功能(例如更改视角和调整宽高比)时,
播放功能可能不起作用。光盘的相关信息在光盘盒上详细说明。如果需要,请
参阅此信息。
\ 播放 BD-J 标题时,加载时间可能比普通标题长一些,一些功能可能运行速度较慢。
中文 9|
地区代 地区代
光盘类型 地区 光盘类型 地区
码 码
北美洲、中美洲、南 美国、美国未成为省
1
a 美洲、韩国、日本、 的领土和加拿大。
台湾、香港和东南 欧洲、日本、中东、
亚。 2 非洲、南非和格陵兰
Blu-ray 欧洲、格陵兰、法国 台湾、韩国、菲律
b
光盘 未成为省的领土、中
东、非洲、澳大利亚
3 宾、印度尼西亚和香
和新西兰。 DVD- 港
VIDEO 墨西哥、南美洲、中
c
印度、中国、俄国、 美洲、澳大利亚、新
中亚和南亚。 4 西兰、太平洋群岛和
加勒比
俄国、东欧、印度、
5 北朝鲜和蒙古
6 中国
| 10 中文
02 开始使用
Blu-ray 光盘 3D Blu-ray 光盘
BD-LIVE DivX
英国、法国、德国等国家/地区中的 PAL
广播制式
中文 11 |
视频文件支持
文件扩展 视频编解 帧速率 位速率 音频编解
(fps) (Mbps)
容器 分辨率
名 码器 码器
*.avi DivX
*.mkv 3.11/4/5/6
*.asf MPEG4 SP/
*.wmv ASP
AVI
*.mp4 H.264 BP/ Dolby Digital
MKV
*.3gp MP/HP 1920x1080 LPCM
ASF
*.vro Motion (WMV v7,v8, ADPCM(IMA,
MP4
*.mpg JPEG MSMPEG4 6~30 30 MS)
3GP
*.mpeg Microsoft v3 : AAC
MOV
*.ts MPEG-4 v3 1280x720) HE-AAC
FLV
*.tp Window WMA
VRO
*.trp Media Video Dolby Digital
VOB Plus
*.mov v7, v8, v9
PS MPEG(MP3)
*.flv MPEG2
TS DTS (Core)
*.vob
SVAF MPEG1
*.svi
VP6 640x480 4
*.m2ts
*.mts MVC 24/25/30 60
*.divx
*.webm WebM VP8 Vorbis
RV8/9/10 1920x1080 6~30 20
*.rmvb RMVB RealAudio 6
(RV30/40)
| 12 中文
02 开始使用
持编解码器来编码,如果其内容 排)。
有问题的话,也无法播放。 - 支持 BD MVC 规格。
- 如果文件的容器信息错误,或
` 音频解码器
者文件本身损坏,则不能保证
可以正常播放。 - 支持 WMA 10 PRO(最高
- 位速率/帧速率高于标准的文件 5.1)。
在进播放时可能会断断续续。 - 不支持 WMA 无损音频。
- 如果文件的索引表损坏,则寻 - 支持 ADPCM IMA、MS。
找(跳过)功能不可用。 - 不支持 ADPCM (A-Law,
- 通过网络连接远程播放文件 µ-Low)。
时,视频播放可能会断断续 - 不支持 QCELP/AMR NB/WB。
续,视网络速度而定。 - 支持 vorbis(最多 2 声道)。
- 一些 USB 或数码相机设备可能 - 支持 DD+(最多 7.1 声道)。
与此播放器不兼容。
受支持的 DivX 字幕文件格式
- 如果文件的原始内容是以 UHD
ĞĞ
录制的,则无法播放。 *.ttxt、*.smi、*.srt、*.sub、*.txt
- 根据您所在的国家/地区的不 | 备注 |
同,RMVB 格式可能不受支持。 \ 一些 DivX、MKV 和 MP4 格式的光盘
` 视频解码器 可能无法播放,具体视光盘分辨率
和帧速而定。
- 最高支持 H.264 Level 4.1。
(不支持 FMO/ASO/RS)
- 不支持 VC1/AP/L4。
- WMVv7、v8、MSMPEG4 v3、
MVC、VP6 以外的编码解码器
1) 低于 1280 x 720:
最高 60 帧。
2) 高于 1280 x 720:
最高 30 帧。
中文 13 |
| 14 中文
02 开始使用
*.jpg 储类 (MSC) 设备,例如 Thumb
JPEG 15360x8640
*.jpeg drive(闪盘)和 USB HDD。
*.png PNG 4096x4096 (不支持 HUB。)
*.bmp BMP 4096x4096 • 某些 USB HDD 设备、多卡读
卡器和闪盘可能与本播放器不
*.mpo MPO 15360x8640
兼容。
USb 连接注意事项 • 如果一些 USB 设备需要额外的
电源,它们可能会受到电路安
• 播放器支持 USB 存储介质、 全设备限制。
MP3 播放器、数码相机和 USB • 如果从 USB HDD 播放不稳
读卡器。 定,请通过将 HDD 插入到墙
• 一些 USB 或数码相机设备可能 上插座中来提供额外的电源。
与此播放器不兼容。 如果问题仍然存在,请与 USB
• 播放器支持 FAT16、FAT32 和 HDD 制造商联系。
NTFS 文件系统。 • 对于任何数据文件损坏或数据
• 将 USB 设备直接连接到播放器 丢失,SAMSUNG 概不负责。
USB 端口。通过 USB 电缆连 • 播放器不支持 NTFS 压缩的文
接可能会导致兼容性问题。 件、备用文件或加密的文件。
• 将多个内存设备连接到多卡读 - 您可以在台式计算机上修复
卡器中,可能导致读卡器无法 或格式化 USB 设备。(仅限
正常操作。 MS-Windows 操作系统)
• 播放器不支持 PTP 协议。
• 在“加载”过程中不要断开
USB 设备连接。
• 图像分辨率越大,显示延迟的
时间越长。
• 此播放器无法播放从商业网站
下载的带有 DRM(数字版权管
理)功能的 MP3 文件。
中文 15 |
附件
检查下面显示的随附附件。
遥控器电池(AAA 型) 用户手册
节目源
音量 音量
– + VOL
VOL +–
三星 电视
1 2 3
4 5 6
7 8 9
碟片菜单 标题菜单
0 弹出
智能枢纽 HOME
HOME
重复
工具 信息
返回 退出
A B C D
画中画 HDMI输入
PANDORA
搜索 DIGITAL
声道 SUBTITLE
字幕 INPUT
全屏
HDMI 电缆 遥控器
| 16 中文
02 开始使用
播放/暂停按钮
停止按钮
打开/关闭按钮
USB HOST
光盘托架
遥控器感应器
| 备注 |
\ 要通过 USB Host 插孔升级播放器的软件,必须使用 USB 内存棒。
\ 播放器显示“Blu-ray 光盘”菜单时,此刻按下播放器或遥控器上的“播放”按
钮不能开始播放电影。 要播放电影,必须在光盘菜单中选择“播放电影”或
“开始”,然后按遥控器上的 v 按钮。
\ 要使用 Anynet+ (HDMI-CEC) 功能,请将 HDMI 电缆连接至 HDMI 1 端子。
连接 HDMI 2 端子时,Anynet+ (HDMI-CEC) 功能不可用。
后面板
中文 17 |
打开和关闭电视。
打开或关闭播放器。 (此按钮仅在 Samsung 电视上可用。)
音量 音量
– + VOL
VOL +– 调节电视音量。
(此按钮仅在 Samsung 电视上可用。)
按此按钮可打开和关闭光盘托架。 三星 电视
1 2 3
按数字按钮可以操作选项。 4 5 6
7 8 9
碟片菜单 标题菜单
用来进入光盘菜单。 0 弹出 用来进入弹出菜单/标题菜单。
按下可向后或向前跳过。 按下可向后或向前搜索。
按下可停止光盘。 按下可暂停光盘。
返回到上一个菜单。 返回 退出 按下以退出菜单。
这些按钮不但可用于播放器上的菜单, A B C D
安装电池
| 备注 |
\ 如果遥控器无法正常操作:
- 检查电池的正负极。
- 检查电池电量是否已耗尽。
- 检查遥控器感应器是否被障碍物挡住。
- 检查附近是否有荧光灯照明。
| 警告 |
\ 根据当地环境法规处置电池。切勿将其放入家庭
垃圾。
| 18 中文
03 连接
IN 插孔。
- 在连接好所有其他接线之前,不要将电源线连接至墙上插座。
- 更改连接时,请先关闭所有设备再开始。
音频
视频
| 备注 |
\ 要使用 Anynet+ (HDMI-CEC) 功能,请将 HDMI 电缆连接至 HDMI 1 端子。
如果您将电缆连接至 HDMI 2 端子,Anynet+ (HDMI-CEC) 功能将不可用。
\ HDMI 2 端子不能输出视频信号。
\ 如果您使用 HDMI 至 DVI 电缆来连接至显示设备,则还必须将播放器上的 Digital
Audio Out 连接至音频系统才能听到声音。
\ HDMI 电缆会输出数字视频和音频,因此不需要连接音频电缆。
\ 根据电视,某些 HDMI 输出分辨率可能不起作用。请参阅电视的用户手册。
\ 使用 HDMI 将播放器连接至电视或新电视,然后第一次打开它时,播放器会自
动将 HDMI 输出分辨率设置为电视支持的最高分辨率。
\ HDMI 电缆过长时,可能会导致屏幕噪讯。如果发生这种情况,请在菜单中将
HDMI 深色设置为“关闭”。
\ 要以 HDMI 720p、1080i、1080p 或 2160p 输出模式查看视频,必须使用高
速(类别 2)HDMI 电缆。
\ HDMI 只将纯数字信号输出至电视。
如果电视不支持 HDCP (High-bandwidth Digital Content Protection),那么屏幕上将
出现雪花信噪。
中文 19 |
音频/视频
支持 HDMI UHD
的 AV 接收器
视频
| 20 中文
03 连接
HDMI IN 插孔。
• 最佳质量(建议)
音频 视频
HDMI 接收器
| 警告 |
\ 不要使用 HDMI 电缆连接产品的 HDMI OUT 1 和 HDMI OUT 2 端子。
中文 21 |
音频
7.1 声道放大
器
| 备注 |
\ 必须连接播放器上的前左和前右输出与 7.1 声道放大器才能听到某些 Blu-ray 光
SURR. : SURROUND
SURROUND BACK
盘的光盘菜单音频。
\ 连接至 5.1 声道家庭影院或接收器时,请连接播放器上除左后环绕声/右后环绕
声输出以外的所有模拟音频输出插孔。
| 22 中文
03 连接
法,将播放器连接至网络路由器。
要使用 AllShare 网络功能,必须将
计算机连接至网络,如图中所示。
连接可以是有线连接或无线连接。 无线路由器
有线网络
宽带服务
宽带调制解调器 | 备注 |
(含有集成路由器)
宽带服务
\ 如果无线路由器支持 DHCP,则本播
放器可以使用 DHCP 或静态 IP 地址
或
连接至无线网络。
\ 将无线路由器设置为“基础结构”
路由器 模式。不支持对等模式。
\ 本播放器仅支持下列无线安全密钥
协议:
宽带服务
- WEP (OPEN/SHARED), WPA-PSK
宽带调制解调器 (TKIP/AES), WPA2-PSK (TKIP/AES)
\ 请选择无线路由器上当前未在使用
中的通道。如果附近另一个设备当
前正在使用为无线路由器设置的通
| 备注 | 道,则会导致干扰和通信失败。
\ 路由器或 Internet 服务提供商的策略 \ 如果选择“纯高通”(Greenfield)
可能会阻止播放器访问 Samsung 的 802.11n 模式并且在路由器上将“加
软件更新服务器。 如果出现这种情 密类型”设置为 WEP、TKIP 或 TKIP-
况,请与 Internet 服务提供商 (ISP) AES (WPS2Mixed),则本播放器将不支
联系以了解更多信息。 持符合新的 Wi-Fi 认证规范的连接。
\ 对于 DSL 用户,请使用路由器来建 \ 无线 LAN 本身会产生干扰,具体视
立网络连接。 操作条件(路由器性能、距离、障碍
物、其它无线设备干扰等等)而定。
中文 23 |
• 如果您未配置初始设置,主屏幕不 1
会出现。 电影和电视节
目
应用程序 照片、视频和
音乐
• 升级软件版本后,播放器中的 OSD 6 2
(屏幕显示)可能会更改。
• 访问步骤可能会因选择的菜单而 3
转至 Apps 并连接至网络以获取推荐的应
用程序。
Web 浏览器r 设置
4
异。 5 a Samsung 帐户 d Screen Mirroring
将播放器连接至电视之后,打开
电视和播放器。第一次打开播放 应用程序 : 可让您访问您可以下
1
器时,播放器的初始设置屏幕将 载的各种付费或免费应用程序。
会出现在电视上。“初始设置” 照片、视频和 音乐 : 可让您播放
过程可让您设置屏幕显示 (OSD) 2 光盘、USB、计算机或移动设备
和菜单语言、高宽比(屏幕大 上的照片、视频或音乐内容。
小)、网络类型并将播放器连接 设置 : 打开播放器的菜单,以让
至网络。
3 您在其中设置各种功能以符合您
| 备注 | 的个人喜好。
\ 如果您在“初始设置”过程中跳过 4 Web 浏览器 : 可让您访问互联网。
“网络设置”,则可以在以后配置
建议的应用程序 : 可让您访问建
网络设置。如需说明,请参阅第 5
议的应用程序。
36~39 页上的“配置网络连接”。
\ 如果您要再次显示“初始设置”屏幕 电影和电视节目 : 可让您从互联
并进行更改,请在主屏幕中选择设置 网下载电影和电视节目。
> 系统 > 设置,或者选择“重设” 6 | 备注 |
选项。(请参阅第 32 或 35 页) \ 根据您所在国家/地区的不同,
\ 如果要使用 Anynet+(HDMI-CEC) 功 可能不支持此菜单功能。
能,请遵循下面的说明操作。
1) 使用 HDMI 电缆将播放机连接 | 备注 |
至 Anynet+(HDMI-CEC) 兼容的 \ 如果播放器保留在停止模式超过 5
Samsung 电视。 分钟未使用,则电视上会出现屏幕
2) 在电视和播放器上将 Anynet+(HDMI- 保护程序。如果播放器保留在屏幕
CEC) 功能设置为“开”。 保护程序模 式超过 20 分钟,则电源
3) 将电视设置为初始设置过程。 会自动关闭。
| 24 中文
04 设置
按 v 按钮。“设置”屏幕 3 择项目。
将会出现。 • 按 v 按钮可激活当前选中的
项目或确认设置。
设置
退出 按钮:按此按钮可以退出当
显示 4
显示
超高清输出 自动 前菜单。
3D 设置
音频
系统 分辨率
电影帧(24Fs)
自动
自动
详细的功能信息
支持
DVD 24Fs 转换 关
节目源 每个设置功能、菜单项和个别选
项在屏幕上详细说明。在查看说
明,请使用 ▲▼◄► 按钮选择功
音量 音量
– + VOL
+–
2. 要访问“设置”屏幕上的菜
VOL
三星 电视
能、菜单项或选项。说明一般出
1 2 3
单、子菜单和选项,请参阅 现在屏幕右侧。每项设置功能的
4 5 6
下面的遥控器图示。 简短说明在下一页开始。在本手
7 8 9 册的“附录”中还提供了有关部
遥控器上用于“设置”菜单的 碟片菜单 标题菜单
0 弹出 分功能的其他信息。
按钮
1
智能枢纽 HOME
HOME
重复
工具 信息
3
2 返回 退出
4
A B C D
HOME 按钮:按此按钮可移至主
画中画 HDMI输入
PANDORA
搜索 DIGITAL
声道 SUBTITLE
字幕 INPUT
全屏
1
屏幕。
2 返回 按钮:返回到上一个菜单。
中文 25 |
超高清输出 | 备注 |
\ 要使用此功能,您必须将播放机连接
至支持 UHD 分辨率的设备,并且您必
须具有以 24fps(帧每秒)播放的连
接。
选择是否以 3D 模式播放具有 3D 内
容的 Blu-ray 光盘。
3D 设置 • 如果在 3D 模式下移至主屏幕或应
用程序屏幕,播放器将自动切换至
2D。
可让您将播放器的输出调整为电视的
电视屏幕比例
屏幕尺寸和屏幕格式。
BD Wise 是 Samsung 最新的互连功
能。如果使用 BD Wise 将 Samsung
播放器和 Samsung 电视用 HDMI 互
bD Wise
相连接,且 BD Wise 在播放器和电视
上都打开,播放器将以 Blu-ray 光盘/
DVD 的视频分辩率和帧率输出视频。
可以将 HDMI 视频信号的输出分辨
率设置为 BD Wise、自动、1080p、
1080i、720p 或 576p/480p。
分辨率
数字表示每帧视频的行数。
i 和 p 分别表示隔行和逐行扫描。一
般而言,行数越多,质量越高。
| 26 中文
04 设置
“自动”可让播放器自动将其 HDMI
输出调整为每秒 24 帧,以改善画面
质量。
电影帧(24Fs)
• 只能在支持此帧速率的电视上使用
“电影帧 (24Fs)”功能。
• 只有播放器处于 HDMI 1080i 或
1080p 输出分辨率模式时才可选择
“电影帧”。
将 DVD 播放转换为每秒 24 帧并通过
DVD 24Fs 转换 HDMI 输出。 仅当将电影帧 (24Fs) 设
置为自动时,此选项才可用。
Smart Hub 屏幕 可让您选择最适合 Smart Hub 屏幕
尺寸 的尺寸。
可让您设置 HDMI 输出的色空间格
HDMI 颜色格式
式,以与相连设备(电视、显示器
等)的功能匹配。选择格式之后,屏
幕会暂时变黑。
可让您将产品设置为以“深色”输出
HDMI 深色 HDMI 视频。“深色”提供颜色深度
更深的精确颜色重现。
观看 DVD 时,设置为此项可以提高
渐进模式
画面质量。
中文 27 |
| 28 中文
04 设置
不同步。 如果发生这种情况,请调
整音频延迟时间以与视频信号相配。
• 可以在 0 毫秒 和 200 毫秒 之间设
音频同步 置音频延迟时间。
请将其调整为最佳设置。
| 备注 |
\ 您指定的音频延迟时间可能不尽相
同,视播放的内容而定。
设置通过 HDMI1 和 HDMI2 的音频输
出。
自动 : 将根据连接至 HDMI1 和
HDMI2 的设备,自动设置音频输
HDMI 音频输出 出。
HDMI1 : 将通过连接至 HDMI1 的
设备输出音频。
HDMI2 : 将通过连接至 HDMI2 的
设备输出音频。
中文 29 |
| 30 中文
04 设置
配置网络连接,以便您可以享受各种
网络设置 功能(例如互联网服务或 AllShare 功
能)以及执行软件升级。
可让您使用对等网络将 Wi-Fi 直连设备
连接至播放器,而不需要无线路由器。
请注意,如果播放器连接至无线网
络,则在您使用 Wi-Fi 直连时,它可
Wi-Fi 直连 能会断开连接。
| 备注 |
\ 正在使用 Wi-Fi 直连功能时,文本文
件(例如扩展名为 .TXT 或 .DOC 的文
件)不会显示出来。
可让您控制网络上的哪些设备(例如
AllShare 设置 智能手机和 Tablet)可以与您的 Blu-
ray Disc 播放器共享内容。
可让您输入播放器的名称,该名称将
设备名称
用于在网络上识别播放器。
设置各种 BD-Live 功能。如果您已连
接至 Internet,则 BD-Live 可让您访
问一些 Blu-ray 光盘上的提供的额外
功能。
bD-Live Internet 连接:可让您
bD-Live 设置
完全允许、部分允许或禁止 BD-
Live Internet 连接。
blu-ray光盘数据管理 :管理从
BD-Live 服务或 Blu-ray 光盘下载
的 BD 数据。
中文 31 |
系统 设置 可让您重新运行“初始设置”过程
可让您将播放器设置为通过缩短开机
时间来快速打开。
快速启动 | 备注 |
\ 如果将此功能设置为开,则待机电源
消耗将会提高。
您可以选择首选用于屏幕菜单、光盘
菜单、音频、字幕等等的语言。
语言 • 仅当光盘支持为光盘菜单、光盘音
频或字幕选择的语言时,它才会出
现。
| 32 中文
04 设置
键盘设置:可让您配置连接至播
放器的无线 USB 键盘。
| 备注 |
\ 仅当 QWERTY 键盘屏幕或窗口出现在
Web 浏览器中时,才能使用键盘。
鼠标设置:可让您配置连接至播
放器的无线 USB 鼠标。 您可以在
播放器的菜单和 Web 浏览器中使
用鼠标,就如在计算机上使用鼠
标那样。
` 要将鼠标与播放器的菜单配合使
设备管理器 用:
1. 将 USB 鼠标连接至播放器。
2. 单击在“鼠标设置”中选择的主
按钮。“简单菜单”将会出现。
3. 单击所需的菜单选项。
| 备注 |
\ 一些 USB HID 键盘和鼠标可能与本产
品不兼容。
\ 一些 HID 键盘按键可能不起作用。
\ 不支持有线 USB 键盘。
\ 可能不支持一些应用程序。
\ 如果无线 HID 键盘由于受到干扰而不
出现,请将键盘移近一些播放器。
中文 33 |
| 34 中文
04 设置
Samsung 播放器相连的操作,并可
Anynet+ (HDMI-
让您通过一个 Samsung 电视遥控器
CEC)
控制那些产品。要使用此功能,必须
使用 HDMI 电缆将本播放器连接至
Anynet+ Samsung 电视。
查看 DivX® VOD 注册代码,购买并
DivX® 视频点播
播放 DivX® VOD 内容。
支持 如果激活此功能,则可让 Samsung
呼叫中心工程师远程诊断并解决产品
的问题。需要活动的互联网连接。
| 备注 |
远程管理 \ 在某些国家/地区中,“远程管理”服
务可能不可用。
\ 请与最近的服务中心联系,以获取 PIN
码及负责人的电话号码。该负责人会
远程诊断产品并执行必要的测量。
有关“软件升级”功能的更多信息,
软件更新 请参阅第 40~42 页上的“升级软
件”。
联系 Samsung 提供联系信息以协助您使用播放器。
将网络和 Smart Hub 设置以外的所
有设置重设为其出厂默认设置,然后
重设
启动设置功能。
默认安全 PIN 是 0000。
中文 35 |
04 设置
明操作输入该值的数字。 放器会搜索然后显示可用的
7. 重复步骤 5 和 6,直到填写 网络列表。
完所有值为止。
| 备注 | 网络设置
选择网络类型。
\ 您可以从互联网提供商获得网络值。 网络类型
无线网络
无线
8. 完成输入所有值之后,选择
linksys3
solugen_edu#2
您可以将 blu-ray 播放器 连接到
iptime23 Internet。请选择要使用的无线网
放器会验证网络连接,然后 刷新 WPS(PbC)
连接至网络。
无线网络 5. 选择所需的网络,然后按 v
按钮。
6. 在“安全”屏幕上,输入网
可采用四种方法设置无线网络连
接:
络的“安全代码”或“密码
- 无线自动 短语”。
- 无线手动 使用遥控器上的数字按钮直
- WPS(PBC) 接输入数字。输入字母的方
- WPS(PIN) 法是使用箭头按钮选择字
配置无线网络连接时,当前通过 母,然后按 v 按钮。
播放器连接的所有无线网络设备 | 备注 |
或(如果适用)播放器的当前有
\ 要在输入密码时看到密码,请使用
线连接将会断开。
箭头按钮选择右侧的显示密码,然
ĞĞ 无线 - 自动 后按 v 按钮。
1. 在主屏幕中,选择设置,然 7. 完成后,选择完成,然后按
后按 v 按钮。 v 按钮。播放器会验证网
络连接,然后连接至网络。
2. 选择网络,然后按 v 按钮。
8. 验证完成后,选择确定,然
3. 选择网络设置,然后按 v
后按 v 按钮。
按钮。
| 备注 |
\ 应可以在用于设置路由器或调制解
调器的设置屏幕上找到“安全代
码”或“密码短语”。
中文 37 |
| 38 中文
04 设置
自动获得它需要的所有网络
设置值,然后连接至网络。
“网络状态”屏幕将会出 Wi-Fi 直连
现。验证网络连接后,播放 Wi-Fi 直连功能可让您使用对等
器会连接到网络。 网络将 Wi-Fi Direct 设备连接至
WPS(PIN)
ĞĞ
播放器以及互相连接,而不需要
无线路由器。
在开始之前,请在计算机上打开
路由器的设置菜单,并访问该屏 | 备注 |
幕的 WPS PIN 输入字段。 \ 如果通过 Wi-Fi 直连连接,一些 Wi-Fi
1. 在主屏幕中,选择设置,然 直连设备可能不支持 AllShre 功能。
后按 v 按钮。 如果出现这种情况,则建议您更改
设备之间的网络连接方法。
2. 选择网络,然后按 v 按钮。
\ 蓝牙传送可能会干扰 Wi-Fi 直连信
3. 选择网络设置,然后按 v
号。在使用 Wi-Fi 直连功能之前,强
按钮。 烈建议您关闭任何活动的移动设备
4. 在“网络设置”屏幕中选择 上的蓝牙功能。
无线,然后按 v 按钮。
1. 打开 Wi-Fi 直连设备并激活其
播放器会搜索然后显示可用
Wi-Fi 直连功能。
的网络列表。
2. 在主屏幕中,选择设置,然
5. 选择所需的网络,然后按 ►
后按 v 按钮。
按钮。
3.
6. 选择 WPS(PIN),然后按 v
选择网络,然后按 v 按钮。
按钮。PIN 弹出窗口将会出 4. 选择 Wi-Fi 直连,然后按 v
现。 按钮。您可以连接的 Wi-Fi 直
连设备将会出现。
7. 将该 PIN 输入到路由器设置
屏幕的 WPS PIN 输入字段 5. 有三种方式可用于完成 Wi-Fi
中,然后保存该屏幕。 连接:
• 通过 Wi-Fi 设备。
| 备注 |
• 使用 PBC 通过播放器。
\ 有关如何访问路由器设置屏幕的说
明,请与路由器制造商联系,或请 • 使用 PIN 通过播放器。
参阅路由器的用户手册。 下面说明每一种方式。
中文 39 |
| 40 中文
04 设置
按钮。
4. 要下载更新软件并立即更新, 新请求”弹出窗口将会出
请选择立即更新,然后按 v 现。
按钮。有关详细信息,请参阅 4. 选择确定。产品会升级软
本页上的“立即更新”。 件,关闭,然后自动打开。
5. 要让产品在有更新软件可用 5. 如果您未在一分钟内选择确
时自动下载,请选择自动更 定或取消,产品将会存储将
新,然后按 v 按钮。有关 的升级软件。您可以使用自
详细信息,请参阅第 41 页上 动更新在以后升级软件。
的“自动更新”。 6. 如果您选择取消,播放器将
| 备注 | 会取消升级。
\ 播放器关闭,然后自动打开后,即 | 备注 |
表示升级已完成。 \ 系统升级完成后,可在“联系
\ 对于不稳定的互联网连接或在软件 Samsung”屏幕的“产品信息”部分
更新期间消费者粗心大意造成的播 中检查软件详细信息。
放器功能异常,Samsung Electronics \ 在软件更新期间,不要关闭播放
不承担任何法律责任。 器。可能会导致播放器出现故障。
\ 如果您想在升级软件的下载过程中
自动更新
取消升级,按 v 按钮。
\ 当系统升级正在进行中时,会在前 您可以设置“自动更新”功能,
面板上显示 "UPDATE"。 以便播放器在处于“自动更新”
模式时下载新的升级软件。
立即更新 在“自动更新”模式下,播放器
您可以使用“立即更新”来通过 会关闭,但它的互联网连接处于
网络连接或使用 USB 闪存盘更 活动状态。这样,在不使用播放
新软件。网络说明如下所示。 器时,播放器可以自动下载升级
USB 闪存盘说明在下一页。 软件。
1. 选择立即更新,然后按 v 1. 按 ▲▼ 按钮选择自动更新,
按钮。 然后按 v 按钮。
“立即更新”弹出窗口将会
出现。
中文 41 |
| 42 中文
05 媒体播放
Tablet 等等上的内容。 播放或观看位于 USB 设备上的
要播放位于计算机或移动设备上 多媒体文件。
的内容,必须将它们及本产品 方法 1
连接至网络。要播放计算机上
的内容,还必须在计算机上安装 1. 打开播放器。
Allshare 网络软件。 2. 将 USB 设备连接至播放器前
| 备注 | 面板上的 USB 端口。“已连
接新设备”弹出窗口将会出
\ 您可以使用与 Allshare 网络软
现。
件兼容的其他程序播放 PC 上
的内容,但是,建议您使用
Allshare 网络软件。 电影和电视节
目
应用程序 照片、视频和
音乐
连接到新设备。
m80
播放商业光盘 照片
视频
音乐
所有内容
1. 按 8 按钮以打开光盘托架。
转至 Apps 并连接至网络以获取推荐
的应用程序。
Web 浏览器 设置
2. 轻轻地将光盘放入光盘托架
a Samsung 帐户 d Screen Mirroring
中,光盘的标签向上。
| 备注 |
\ 如果弹出窗口不出现,请转至
方法 2。
3. 使用 ▲▼ 按钮选择照片、视
频、音乐或所有内容,然后
按 v 按钮。照片、视频和
音乐屏幕将会出现,并列出
3. 按 8 按钮以关闭光盘托架。 设备的内容。根据内容的排
播放将会自动开始。 列方式,您将看到文件夹和/
4. 如果播放未自动开始,请按 或个别文件。
遥控器上的 6 按钮。
中文 43 |
| 44 中文
05 媒体播放
返回到主屏幕。
CD 光盘上烧录的多媒体文件。 按退出按钮以直接返回到主
1. 将用户烧录的光盘放入光盘 屏幕。
托架中,光盘的标签面朝 7. 有关如何控制光盘上的视
上,然后关闭托架。“已连 频、音乐和图片播放的说
接设备”弹出窗口将会出 明,请转至第 47~56 页。
现。
2. 使用 ▲▼ 按钮选择要观看或 使用 AllShare 网络功能
播放的内容类型 - 照片、视
频、音乐或所有内容 - 然后 AllShare 可让您使用无线连接
按 v 按钮。 通过播放器播放位于计算机或
AllShare 兼容设备上的照片、视
| 备注 |
频或音乐。
下载 AllShare 软件
\ 虽然播放器将显示所有内容类型的
文件夹,但是它仅显示在步骤 2 中
选择的内容类型的文件。例如,如 使用 AllShare 可以轻松检索和欣
果您选择了“音乐”,将只能看到 赏来自计算机和支持 DLNA 的设
音乐文件。您可以通过返回到照 备中的媒体文件。 但需要在计算
片、视频和音乐屏幕并重复步骤 2 机上安装 AllShare PC,且移动设
来更改此选择。 备需要支持 AllShare。 更多信息
3. 将显示一个屏幕,其中列出 请访问三星内容和服务门户网站
光盘的内容。根据内容的排 (http://content.samsung.com)。
列方式,您将看到文件夹和/ - 尝试通过第三方 DLNA 服务器
或个别文件。 播放媒体文件时可能会遇到兼
4. 必要时,使用 ▲▼◄► 按钮 容性问题。
选择文件夹,然后按 v 按
钮。
5. 使用 ▲▼◄► 按钮选择要观
看或播放的文件,然后按 v
按钮。
中文 45 |
播放计算机的
文件
AllShare
播放计算机的
控制在 Blu-ray 光盘播放
Connection
文件
AllShare 连接 器上播放的计算机文件
Allshare 智能手机
1. 将 Blu-ray 光盘播放器、计算
机和/或 AllShare 兼容设备连 (仅适用于支持 AllShare 功能的
接至相同的无线网络。 Samsung 手机。)
2. 按照 AllShare 软件安装/说明 1. 将 Blu-ray 光盘播放器、计算
手册中的说明设置设备和文 机和 AllShare 兼容手机连接
件以进行播放或观看。 至相同的无线网络。
3. 在播放器的主屏幕上选择照 2. 按照 AllShare 软件安装/说明
片、视频和音乐,然后按 v 手册中的说明设置设备和文
按钮。照片、视频和音乐屏 件以进行播放或观看。
幕将会出现。 3. 在计算机上,使用 AllShare
4. 选择要播放的内容类型 - 照 软件,确认已连接手机。
片、视频、音乐或所有内容 - 4. 在手机上,选择要观看或播
然后按 v 按钮。 放的文件,然后选择 Blu-ray
5. 在下一个屏幕中,选择 播放器作为播放设备。
Allshare,然后按 v 按 5. 在手机上,开始播放。
钮。
6. 在出现的已连接至 Allshare 的
设备列表中,选择计算机或其
他 Allshare 兼容设备,然后按
v 按钮。列出可用文件的屏
幕将会出现。
7. 选择要播放或观看的文件,然
后按 v 按钮。
| 46 中文
05 媒体播放
音量 音量
VOL + VOL
+–
内容的播放。根据光盘或内容,本手册中说明的一些功能可能不可用。 三星 电视
1 2 3
遥控器上用于视频播放的按钮
4 5 6
7 8 9
碟片菜单 标题菜单 在播放期间,按 1 或
0 弹出
跳过动作 2
按钮。每次按 1 或
播放 2 按钮,光盘都会移至
智能枢纽 HOME
前一章/前一个文件或下一
HOME
重复
章/下一个文件。
工具 信息
与播放相关的按钮 使用光盘菜单、标题菜单、弹出
在“搜索”、“慢动作播放”或 菜单和标题列表
“逐个动作播放”模式中,播放
返回 退出
碟片菜单 在播放期间,按此按钮可
器不会播放声音。
A B C D 按钮 以显示光盘菜单。
• 要恢复正常速度播放,请按画中画
INPUT
搜索 声道 字幕 全屏
在播放期间,按此按钮可
6 按钮。
标题菜单 以显示标题菜单。
6 按钮 开始播放。 按钮 • 如果光盘具有播放列表,
5 按钮 停止播放。 请按视图转至播放列表。
7 按钮 暂停播放。 弹出菜单 在播放期间,按此按钮可
按钮 以显示弹出菜单。
在播放期间,按 3 或
快动作播 4 按钮。每次按 3 或 使用工具菜单
放 4 按钮,播放速度都会 在播放期间或暂停模式下,按 工
发生变化。 具 按钮。
在暂停模式中,按 4 按
慢动作播 钮。 选择此项可回到电影的
放 每次按 4 按钮,播放速 从头播放 开头,然后按 v 按
度都会发生变化。 钮。
在暂停模式中,按 7 按
逐个动作 钮。
播放 每次按 7 按钮,新的一
帧将会出现。
中文 47 |
| 48 中文
05 媒体播放
- 关:选择此项可恢复正 - 动态:提高清晰度和亮
常播放。 度。
- 标题:选择此项可重复 - 标准:可对大部分观看
选择的标题。 应用程序选择此设置。
- 章节:选择此项可重复 - 电影:最适合观看电影
特定章节。 画面模式 的设置。
- 重复 A-B:选择此项可 - 用户:可以分别调整锐
重复特定区段。 度和降噪功能。
1. 按 ▲▼ 按钮选择 | 备注 |
重复模式 重复 A-B,然后按 \ 使用 BD Wise 功能
v 按钮。 时,此菜单不会出
2. 在要开始重复播放 现。
的点 (A) 按 v 按
选择此项可设置所需的
钮。让电影播放。 音频
音频语言。
3. 在要停止重复播放
的点 (B) 按 v 按 选择此项可设置所需的
钮。 字幕语言。
字幕 - 还可以按遥控器上的
| 备注 | 字幕 按钮操作此功
\ (B) 点的播放时间必须 能。
设置在 (A) 点的 5 秒钟
选择此项可设置所需的字
之后。 字幕设置
幕选项。
选择此项以从另一个视
角观看场景。“视角”
选项显示可用于观看的
视角 视角数目。当 Blu-ray 光
盘/DVD 包含特定场景的
多个视角时,您可以更
改视角。
中文 49 |
05 媒体播放
使用视图菜单
USB、移动设备或计算机上的音
乐内容的播放。 在音乐文件播放屏幕上,使用
根据光盘或内容,本手册中说明 ▲▼◄► 按钮选择视图,然后按
的一些功能可能不可用。 节目源
v 按钮。
遥控器上用于音乐播放的按钮 显示介质或存储设备上
音量
– + VOL
+–
音量
曲目
VOL
三星 电视
的所有音乐曲目。
1 2 3 按专辑显示介质或存储
4 5 6 专辑
1 设备上的所有音乐。
7 8 9
碟片菜单 标题菜单 按艺术家显示介质或存储
0 弹出 艺术家
2 4 设备上的所有音乐文件。
按流派显示介质或存储
5 流派
3
智能枢纽
HOME
HOME
6
设备上的所有音乐。
重复
显示介质或存储设备上
数字 按钮:如果显示带编号
工具 信息 文件夹
的所有文件夹。
1 的曲目,请按曲目的编号。
将会播放所选曲目。
返回 退出
| 备注 |
\ 根据光盘或存储设备的不同,“视图”
12 按钮:移至下一个曲目/
A B C D
2 菜单可能会不相同或不显示出来。
上一个曲目。
画中画 HDMI输入
PANDORA
搜索 DIGITAL
声道 SUBTITLE
字幕 INPUT
全屏
3 5 按钮:停止曲目。 使用选项菜单
快速播放 (仅限音频 CD (CD-DA)) 在音乐文件播放屏幕上,使用
在播放期间,按 3 或 4 按 ▲▼◄► 按钮选择选项,然后按
4 钮。 v 按钮。
每次按 3 或 4 按钮,播放速
可让您通过选择要播放
度都会发生变化。
的特定文件来创建播放
5 7 按钮:暂停曲目。 列表。它的工作方式对
6 6 按钮:播放当前选择的曲目。 播放所选项 于所有媒体基本相同。
请参阅第 52~54 页上的
“在音频 CD 上创建播
放列表”。
中文 51 |
接至播放器的 USB 设备
TRACK 002 03:56
翻录 TRACK 003
TRACK 004
04:41
04:02
选择此项可查看(内
信息
容)信息。
随机播放音频 CD 上的曲目
选择此项可管理文本编
编码 您可以将产品设置为随机播放音
码选项。
频 CD (CD-DA/MP3) 上的曲目。
选择此项可从设备中删
删除
除文件。 1. 在播放屏幕上,使用
▲▼◄► 按钮选择屏幕左下
| 备注 | 角中的 ,然后按 v 按
\ 根据光盘或存储设备的不同,“选项” 钮。
菜单可能会不相同或不显示出来。 2. 使用 ▲▼ 将“随机播放”模
式设置为开或关,然后按 v
重复音频 CD 上的曲目 按钮。
您可以将产品设置为重复音频 从音频 CD 创建播放列表
CD (CD-DA/MP3) 上的曲目。
1. 在播放屏幕上,使用 ▲▼◄► 1. 显示播放屏幕时,选择选
按钮选择屏幕左下角中的 , 项,然后按 v 按钮。“选
然后按 v 按钮。 项”菜单将会出现。
2. 使用 ▲▼ 按钮选择播放所选
项,然后按 v 按钮。“选
择播放”屏幕将会出现。
3. 使用 ▲▼ 按钮选择曲目,然
后按 v 按钮。一个选中标
记会出现在曲目左侧。
| 52 中文
05 媒体播放
至该曲目,然后再按一次 v 放”屏幕时,“播放列表”将保
按钮。便会移除该曲目的选 持不变。
中标记。 翻录
6. 完成后,按 ▲▼ 按钮选择播
放,然后按 v 按钮。“音 1. 将 USB 设备插入产品前面的
乐播放”屏幕会重新出现, USB 插孔中。
并仅列出您勾选的曲目。将 2. 显示播放屏幕时,选择选
会自动播放选定的曲目。 项,然后按 v 按钮。“选
| 备注 | 项”菜单将会出现。
\ 可以在音频 CD (CD-DA) 上创建最多 3. 使用 ▲▼ 按钮选择翻录,然
含有 99 个曲目的播放列表。 后按 v 按钮。“翻录”屏
幕将会出现。
\ 如果您已创建播放列表,则“选
4. 使用 ▲▼ 按钮选择曲目,然
项”菜单上的播放所选项将被编辑
播放列表取代。 后按 v 按钮。一个选中标
记会出现在曲目左侧。
\ 在“选择播放”屏幕上,您还可以
5. 重复步骤 4 勾选其他曲目。
选择选择全部、全部清除和取消。
- 使用选择全部可选择所有曲目。 6. 要从列表中移除曲目,请移至
这会取消个别曲目选择。按遥控 曲目,然后再次按 v 按钮。
器上的返回按钮或选择播放按 曲目上的选中标记将被除去。
钮,然后按 v 按钮时,所有曲 7. 完成后,使用 ▲▼ 按钮选
目都会出现在“音乐播放”屏幕 择翻录按钮,然后按 v 按
上,并且产品会从曲目 001 开始 钮。“翻录”弹出窗口将会
播放所有曲目。 出现。
- 使用全部清除可以一次性取消选 8. 使用 ▲▼ 按钮选择用来存储
择所有选定的曲目。然后,选择 翻录文件的设备,然后按 v
个别曲目或使用选择全部来选择 按钮。
所有曲目,然后按遥控器上的返 | 备注 |
回按钮。如果您不使用选择全部 \ 翻录正在进行时,不要断开设备的
或选择个别曲目,“播放列表” 连接。
将保持不变。
中文 53 |
| 54 中文
05 媒体播放
使用视图菜单
选择选项,然后按 v 按钮。
在包含照片文件的文件屏幕上,
开始幻灯片播放。逐一
选择视图,然后按 v 按钮。
显示当前文件夹中的所
按标题显示介质或存储设 有文件。如果您要使用
标题 幻灯片放映
备上的所有照片文件。 所选照片组创建幻灯
按日期将介质或存储设备 片,请参阅下面的“播
上的所有照片文件分组。 放所选项”。
日期
单击某个组可查看该组中 可让您通过选择要查看
的照片。 的特定照片来创建播放
显示介质或存储设备上的 列表。它的工作方式对
文件夹 播放所选项 于所有媒体基本相同。
所有文件夹。
如需说明,请参阅第
| 备注 | 52~54 页上的“在音频
\ 根据光盘或存储设备的不同,“视图” CD 上创建播放列表”。
菜单可能会不相同或不显示出来。 选择此项以将所选文件
上传到在线网站或设
备。要使用此功能,您
需要于在线网站建立帐
发送
户,然后使用“登录”
功能登录。请参阅第
56 页上的“使用发送功
能”。
选择此项可从设备中删
删除
除文件。
| 备注 |
\ 根据光盘或存储设备的不同,“选项”
菜单可能会不相同或不显示出来。
中文 55 |
| 56 中文
06 网络服务
视频或在线应用程序。 v 按钮。“登录”屏幕将
会再次出现。
要使用网络服务,首先必须:
6. 要使得下次登录过程更容
1. 将播放器连接至网络。
易,请选择自动登录,然后
(请参阅第 23 页)
按 v 按钮。
2. 配置网络设置。
7. 选择登录,然后按 v 按
(请参阅第 36~39 页)
钮。播放器将让您的帐户登
录。您帐户的电子邮件将显
登录 Samsung 帐户 示在屏幕左下方。
在访问“电影和电视节目”或 | 备注 |
“应用程序” \ 如果您选择自动登录,则下次登录
之前,建议您登录 Samsung 帐 时,播放器将自动输入您的电子邮
户。 件和密码。您只需要选择登录。
要登录 Samsung 帐户,请按照 \ 如果在“登录”屏幕出现时,您的
下面的步骤操作: 电子邮件地址和密码未显示出来,
1. 在显示主屏幕的情况下,按 请选择“电子邮件”字段旁边有向
红色 (A) 按钮。“登录”屏 下箭头的按钮,然后按 v 按钮。
幕将会出现。 含有您已注册的所有帐户的下拉列
2. 选择“电子邮件”字段,然 表将会出现。选择帐户,然后按
后按 v 按钮。键盘弹出窗 v 按钮。播放器将会填写电子邮
口将会出现。 件和密码字段。
3. 使用键盘,输入电子邮件地 \ 如果您在登录之后按 红色 (A) 按钮,
址。完成后,选择完成按 “我的帐户”弹出窗口将会出现。在
钮,然后按 v 按钮。“登 该弹出窗口上,您可以选择注销、更
录”屏幕将会再次出现。 改帐户信息、链接服务帐户、从设备
4. 选择“密码”字段,然后按
中移除帐户和停用帐户。
v 按钮。键盘弹出窗口将 \ 要租借电影和购买付费应用程序,
会出现。 您必须在帐户中注册信用卡。如果
您尚未注册信用卡,请选择更改帐
户信息。在“更改帐户信息”页面
上,选择注册信用卡,按 v 按
钮,然后按照屏幕上的指示操作。
中文 57 |
私政策”屏幕将会出现。 特色 推荐
5. 向下滚动,然后单击查看详细
信息按钮查看完整的文档。 1. 在主屏幕上,选择电影和电
视节目,然后按 v 按钮。
6. 读完之后,向上滚动到第一
2. 选择特色或推荐电影之一,
个输入字段,然后按 v 按
钮同意“条款和条件”以及 然后按 v 按钮。该电影的
“隐私政策”。 页面将会出现。
7. 按 ► 按钮两次转至“补充隐
私声明”屏幕。
| 58 中文
06 网络服务
选择收藏夹、特色、电影、电 用卡”屏幕将会出现。按照屏幕上
视节目或已购买,然后按 v 的说明操作。您必须向帐户注册信
按钮。 用卡才能租借电影和购买付费应用
在出现的页面上,使用 程序。
▲▼◄► 按钮选择节目或电
影,然后按 v 按钮。 使用应用程序
在“电影和电视节目”屏幕 您可以从互联网下载应用程序,
上,您还可以选择新增内容、 还可以访问各种付费或免费应
最热门或流派以查看更多可用
用程序并在电视上观看。要访
的节目或电影。在“流派”屏 问某些应用程序,您需要具有
幕上,使用 ▲▼◄► 按钮选 Samsung 帐户。
择流派,然后按 v 按钮。
要在显示“电影和电视节目” 应用程序屏幕总览
的页面上进行选择,请使用
▲▼◄► 按钮选择内容,然后
应用程序
推荐
1 4
按 v 按钮。 1
我的 App
2 3 4 5
Samsung TV
3. 要观看选择内容,请选择立 WebBrowser
2
即观看,然后按 v 按钮。
“选择”屏幕将会出现,并
列出可从中租借电影的位置 3 更多应用程序
及价格。
4. 选择位置,然后按 v 按
推荐:显示 Samsung 管理的
1
钮。按照屏幕上的说明操作 建议内容。
开始播放电影。 我的 App:在“更多应用程
2 序”屏幕中显示可修改的个
| 备注 | 人应用程序库。
\ 如果您尚未登录 Samsung 帐户,则
更多应用程序:选择此项可访
在执行步骤 3 之后,“登录”屏幕
问“更多应用程序”屏幕,
将会出现,您需要登录。
3 您可在其中添加、修改和删
除应用程序以及查看所有已
下载的应用程序。
中文 59 |
| 60 中文
06 网络服务
然后按 v 按钮。 应用程序进行排序,请按照下面
2. 在“应用程序”屏幕上,使 的步骤操作:
用 ▲▼◄► 按钮选择应用程 1. 在主屏幕中,选择应用程
序,然后按 v 按钮。应用 序,然后按 v 按钮。
程序便会启动。 2. 在“更多应用程序”屏幕
上,使用 ▼ 按钮移至页面
使用“更多应用程序”屏幕
底部的“更多应用程序”热
点,然后按 v 按钮。
更多应用程序 视图 : 下载日期 选项 3. 在“更多应用程序”屏幕
1/9
上,使用 ▲► 按钮移至屏幕
WebBrowser App2 App3
顶部的查看,然后按 v 按
App4 App5 App6
钮。
4. 在出现的下拉列表中,选择
App7 App8 App9
WebBrowser 存储
类别 : 基本 | 版本 : X.XXX | 大小 : XX.XKB
联系信息 : admin@samsung.com (如果您需要与我们联系,请使用此地址。) XX MB / XXX MB
下载日期、最近打开的程序
或标题,然后按 v 按钮。
“更多应用程序”屏幕会列出您 将会按所选条件对“更多应
已下载的所有应用程序,并可让 用程序”屏幕上的应用程序
您执行以下操作: 进行排序。
• 在“更多应用程序”屏幕上,
按下载日期、最近打开的程序 使用选项菜单功能
和标题对应用程序进行排序。
• 将许多“选项菜单”功能应用 锁定/解锁
于“应用程序”屏幕的“我的 使用“锁定/解锁”功能和“安全
应用程序”部分中列出的应用 PIN”,您可以锁定应用程序,
程序,包括更新应用程序、将 使得无法从“应用程序”屏幕或
应用程序移至文件夹中、从 “更多应用程序”屏幕启动这些
“我的应用程序”中删除应用 应用程序。 默认 PIN 是 0000。
程序以及锁定应用程序。
1. 在“更多应用程序”屏幕
• 启动应用程序 上,使用 ▲► 按钮移至屏幕
顶部的选项,然后按 v 按
钮。
中文 61 |
“编辑我的应用程序”可让您将 1. 在“更多应用程序”屏幕上,
应用程序添加至“我的应用程 使用 ▲► 按钮移至屏幕顶部
序”以及从“我的应用程序”中 的选项,然后按 v 按钮。
删除应用程序。它还可让您更改 2. 选择编辑“我的应用程
应用程序在“我的应用程序”中 序”,然后按 v 按钮。
的位置。 “编辑我的应用程序”屏幕
将会出现。
| 62 中文
06 网络服务
应用程序”屏幕上创建文件夹,
钮。“从我的应用程序中删 以将应用程序放入该文件夹中。
除”弹出窗口将会出现。
1. 在“更多应用程序”屏幕上,
4. 选择是,然后按 v 按钮。
使用 ▲► 按钮移至屏幕顶部
5. 返回到“应用程序”屏幕 的选项,然后按 v 按钮。
时,该应用程序将已从“我
2. 选择创建文件夹,然后按 v
的应用程序”区域中删除。
按钮。“设置文件夹名称”
在我的应用程序中移动应用程 弹出窗口将会出现。
序 3. 按 v 按钮。键盘将会出现。
1. 在“更多应用程序”屏幕上, 4. 选择右侧的清除按钮,然后按
使用 ▲► 按钮移至屏幕顶部 v 按钮从输入字段中删除文
的选项,然后按 v 按钮。 件夹 1。然后使用键盘输入要
2. 选择编辑“我的应用程 应用于文件夹的名称。
序”,然后按 v 按钮。 5. 完成后,选择右侧的完成按
“编辑我的应用程序”屏幕 钮,然后按 v 按钮。
将会出现。 该弹出窗口将会再次出现。
3. 选择要在“我的应用程序” 6. 选择确定,然后按 v 按钮。
中移动的应用程序,按 v 新文件夹将会出现在屏幕左
按钮,然后按 ▲▼◄► 按钮 侧的应用程序列表中。
向出现在应用程序图标周围
移至文件夹
的其中一个箭头方向(<、
>、^ 等)移动应用程序图 “移至文件夹”可让您将应用程
标。应用程序图标会向所选 序移至所选文件夹。
方向移动。 1. 在“更多应用程序”屏幕上,
4. 将应用程序图标放置在所需 使用 ▲► 按钮移至屏幕顶部
位置之后,按 v 按钮。 的选项,然后按 v 按钮。
5. 返回到“应用程序”屏幕 2. 选择移至文件夹,然后按 v
时,应用程序将定位在您选 按钮。“移至文件夹”屏幕
择的位置。 将会出现。
中文 63 |
| 64 中文
06 网络服务
序”屏幕中删除应用程序和文件 按 v 按钮。“删除”弹出
夹。如果文件夹中有应用程序, 窗口将会出现。
将会一起删除文件夹和应用程 7. 选择是,然后按 v 按钮。将
序。“删除”会永久删除应用程 会删除所有选定的应用程序。
序。如果您决定要使用已删除的 | 备注 |
应用程序,则您需要再次下载
\ 您不能直接删除已锁定的应用程序
它。
或文件夹。如果您选择要删除已锁
1. 在“更多应用程序”屏幕 定的应用程序或文件夹,当您执行
上,使用 ▲► 按钮移至屏幕 步骤 7 时,“锁定服务”弹出窗口
顶部的选项,然后按 v 按 将会出现。在弹出窗口中输入安全
钮。 PIN,然后按 v 按钮。将会释放锁
2. 选择删除,然后按 v 按 定,并且将会删除应用程序或文件
钮。“删除”屏幕将会出 夹。
现。 更新应用程序
3. 使用 ▲▼◄► 按钮移至应用
程序或文件夹,然后按 v 当应用程序需要更新为最新版本
按钮进行选择。一个选中标 时,请选择应用程序,然后选择
更多应用程序。在“更多应用程
记会出现在所选应用程序或
文件夹的左上角。 序”屏幕上,选择更新应用程
序,然后从列表中选择应用程
4. 要取消选择应用程序,请按 序。该应用程序便会开始更新为
v 按钮。选中标记将会消 最新版本。但是,仅当需要更新
失。 时,更新应用程序才会出现在屏
5. 重复步骤 3 以选择其他应用 幕上。
程序或文件夹。
| 备注 |
\ 要选择所有已下载的应用程序,请
选择屏幕右上方的选择全部,然后
按 v 按钮。要取消选择所有应用
程序,请选择屏幕右上方的取消全
部选择,然后按 v 按钮。
中文 65 |
| 66 中文
06 网络服务
览:指针浏览和链接浏览。第一 有一系列图标,用于启动一系列
次启动浏览器时,指针浏览是活 有用的功能。下面对这些图标进
动的。如果您要使用鼠标在 Web 行说明,从屏幕最左边的那个图
浏览器中导航,则建议您让指针 标开始。
浏览保持活动。如果您要使用遥
控器在 Web 浏览器中导航,则建
1
http://www.samsung.com
议您用指针浏览替换链接浏览。
100%
中文 67 |
z x c v b n m , . ? - 取消
1. 使用遥控器上的 ▲▼◄► 按
钮突出显示所需的字母或数
字。
2. 按 v 按钮将该字母或数字
输入到输入字段中。
| 68 中文
启用抓握
要访问键盘弹出窗口上的选项, 经过批准的站点
06 网络服务
私密浏览已打开
钮,然后按 v 按钮。
关闭
选择键盘的语言。您可
语言 以选择英语、法语、俄
语等等。
在您输入文本时,键盘 打开或关闭抓取器。打
会建议推荐的词语。您 开抓取器功能时,您可
推荐文本
可以将此功能设置为开 启用/禁用 以上下移动网页,而不
或关。 抓握 需要拖动滚动条。
在您输入文本时,键盘 抓取器功能只在指针浏览
会预测下一个字母。预 中可用。
测出现在围绕已输入字 可让您限制儿童访问不
预测下一个 母的环中。您可以选择 适宜网页,方法是仅允
字母 某个预测的字母,也可 许他们访问您已注册的
以移至另一个字母。您 页面。
可以将此功能设置为开 每次访问此功能,PIN 屏
或关。 幕都会出现。第一次访
问此功能时,请使用遥
使用设置菜单 经过批准的 控器上的数字按钮输入
设置菜单包含一些功能,可控制 站点 默认 PIN(即 0000)。
浏览器的工作方式和浏览器安全 您可以针对“经过批准
的工作方式。要打开“设置”菜 的站点”功能使用重设
单,请突出显示 控制面板中的 密码来更改 PIN。请参阅
图标,然后按 下面的内容。
v 按钮。要选择“设置”菜单 经过批准的站点功能:
中的选项,请突出显示该选项, 打开或关闭“经过批准
然后按 v 按钮。 的站点”功能。
中文 69 |
| 70 中文
06 网络服务
“链接服务帐户”功能可让您通 以使用符合 BD-LIVE 的光盘享受
过 Internet 服务将播放器链接至 各种与电影相关的服务内容。
帐户,以便播放器可以在您启动 1. 将 USB 闪存驱动器连接到播
该服务的应用程序时自动将您登 放器前面的 USB 插孔,然后
录该服务。 检查其剩余内存空间。存储
要创建服务帐户链接,请按照下 设备至少必须有 1GB 可用空
面的步骤操作: 间才能容纳 BD-LIVE 服务。
1. 在主屏幕上,按遥控器上的 2. 在主屏幕上选择设置,然后
红色 (A) 按钮登录 Samsung 按 v 按钮。
帐户。 3. 选择网络,然后按 v 按钮。
2. 登录之后,再次按遥控器上 4. 选择 bD-Live 设置,然后按
的 红色 (A) 按钮。 v 按钮。
3. 在“我的帐户”弹出窗口中 5. 选择 bD 数据管理,然后按
选择链接服务帐户,然后按 v 按钮。
v 按钮。
6. 选择选择设备,然后按 v
4. 在“链接服务帐户”屏幕 按钮。
上,选择要链接至播放器的
7. 选择 USB 设备,然后按 v
服务,然后按 v 按钮。
按钮。
5. 选择登入,然后按 v 按钮。
8. 插入支持 BD-LIVE 的 Blu-ray
6. 在“ID 和密码”屏幕中,使 光盘。
用弹出键盘输入用来登录所
9. 从光盘制造商提供的 BD-LIVE
选服务的 ID。完成后,选择
服务内容列表中选择项目。
完成,然后按 v 按钮。
7. | 备注 |
对密码重复相同的过程。完
成后,选择完成,然后按 v \ 使用 BD-LIVE 的方式和提供的内容可
按钮。 能会因光盘制造商而异。
8. 选择确定,然后按 v 按钮。
中文 71 |
07 附录
器的更新。
• 有关播放限制和光盘兼容性的其它信息,请参阅本用户手册的“预
防措施”、“在阅读本用户手册之前”、“光盘类型和特征”和
“在播放之前”等节。
• 对于 blu-ray 光盘播放器逐行扫描输出:消费者应注意,并非所有
高清电视都完全与本产品兼容,并且可能会导致在图像中显示杂
讯。如果发生逐行扫描图像问题,建议用户将连接切换至“标准清
晰”输出。如果对我们电视机与本产品的兼容性存在疑问,请与我
们的客户服务中心联系。
复制保护
• 因为 AACS(高级访问内容系统)已获准成为 Blu-ray 光盘格式
的内容保护系统,这类似于对 DVD 格式使用 CSS(内容加扰系
统),受 AACS 保护的内容会存在播放、模拟信号输出等特定限
制。
本产品的操作和对本产品的限制可能会因购买时间而异,因为在生
产本产品之后,AACS 可能会承继和/或更改那些限制。另外,BD-
ROM 标记和 BD+ 另用作 Blu-ray 光盘格式的内容保护系统,它们
施加特定限制,包括对含有 BD-ROM 标记和/或受 BD+ 保护内容
的播放限制。要获取有关 AACS、BD-ROM 标记、BD+ 或本产品
的其它信息,请与 SAMSUNG 客户中心联系。
• 许多 Blu-ray 光盘/DVD 在编码时带复制保护。因此,只应将播放器
直接连接到电视,不能连接至 VCR。连接至 VCR 可能会导致受复
制保护的 Blu-ray 光盘/DVD 产生图像失真。
• 在美国版权法和其它国家/地区的版权法保护下,未经授权录制、
使用、显示、分发或修订电视节目、录像带、Blu-ray 光盘、DVD
和其它材料,您可能必须承担民事和/或刑事责任。
中文 73 |
网络服务免责声明
通过此设备访问的所有内容和服务均属于第三方,并且受到版权、专
利、商标和/或其它知识产权相关法律的保护。提供给您的这些内容
和服务只能用于个人非商业用途。除内容所有者或服务提供商的授权
方式之外,不得以其它方式使用任何内容或服务。未经内容所有者或
服务提供商事先明确授权,不得修改、复制、重新发布、上载、公
布、传送、翻译、销售、创造衍生作品、开发或以任何方式或媒体分
发通过此设备显示的任何内容或服务。
第三方内容和服务均“按现状”提供。SAMSUNG 不对此处提供的
内容或服务提供基于任何目的的明示或暗示的保证。SAMSUNG 明
确拒绝提供任何暗示的保证,其中包括但不仅于有关适销性或针对
特定用途的适用性的保证。SAMSUNG 不保证可通过此设备获取的
内容或服务的准确性、有效性、及时性、合法性或完整性;无论 任
何情况下(包括疏忽所致),无论是合同行为还是侵权行为,对于
您或任何第三方使用任何内容或服务所导致的任何直接、间接、偶
然、特殊或附带性损害,及律师费、开支或任何其它与此有关的损失
和包含其中的信息损失,SAMSUNG 将不承担任何赔偿责任,即便
SAMSUNG 事先已被告知此种损害发生的可能性。
| 74 中文
07 附录
容和服务,Samsung 无法控制。在不影响本免责声明一般性的前提
下,对于从此设备获取内容或服务的中断或中止,Samsung 明确拒
绝承担任何责任。
Samsung 也不对与此类内容和服务有关的客户服务承担责任。任何
与此内容或服务相关的服务请求都应直接转至相应的内容和服务提供
商。
许可证
• 根据 Dolby Laboratories 许可制造。 Dolby 和双 D 符号
是 Dolby Laboratories 的注册商标。
• 在以下美国专利号: 5,956,674、5,974,380、
6,226,616、6,487,535、7,212,872、7,333,929、
7,392,195、7,272,567 和其他美国和全球已颁发及正
在申请的专利许可下制造。 DTS、符号及 DTS-HD 和符号一起是
DTS, Inc. 的注册商标,并且 DTS-HD Master Audio 是 DTS, Inc. 的
商标。产品包括软件。
© DTS, Inc. 版权所有。
• DivX
- 关于 DIVX 视频: DivX® 是 DivX, LLC(Rovi
Corporation 的一个子公司)创建的数字视频格式。 此设备是通
过 DivX Certified 官方认证的 DivX 视频播放设备。
请访问 divx.com,以取得有关将文件转换为 DivX 视频的更多信息
和软件工具。
- 关于 DIVX 视频点播: 此 DivX Certified 认证设备必须经过注册才
能播放 DivX 视频点播 (VOD) 电影。 要获取注册码,请定位到设
备设置菜单中的 DivX VOD 部分。 请访问 vod.divx.com,以获取
有关完成注册的更多信息。
中文 75 |
• 开源许可证声明
- 在使用开源软件的情况下,可在产品菜单中找到开源许可证。
• Blu-ray Disc™、Blu-ray™ 和相关徽标是 Blu-ray Disc Association
的商标。
| 76 中文
07 附录
备注
3D 设置
• 对于某些 3D 光盘,要在 3D 播放期间停止电影,请按一次
5(停止)按钮。电影将会停止且 3D 模式选项将会取消激
活。
要在 3D 电影播放过程中更改 3D 选项,请按一下 5(停
止)按钮。Blu-ray 菜单将会出现。主屏幕菜单将会出现。再
次按 5(停止)按钮,然后在 Blu-ray 菜单中选择“3D 设
置”。
• 根据电视屏幕上画面的内容及其播放位置,可能会在左边和/
或右边看到垂直黑条。
电视屏幕比例
设置 • 根据光盘类型,一些屏幕比例可能不可用。
• 如果选择不同于电视屏幕的高宽比的高宽比和选项,则图片可
能会变形。
• 如果选择“16:9 原始屏幕”,电视可能会显示 4:3 Pillarbox
(图片各边有黑条)。
BD Wise(仅限 Samsung 播放器)
• BD Wise 打开时,“分辨率”设置自动默认为 BD Wise,“分
辨率”菜单中将显示 BD Wise。
• 如果将播放器连接至不支持 BD Wise 的设备,则不能使用 BD
Wise 功能。
• 为了使 BD Wise 正确操作,请在播放器和电视上将 BD Wise
选项设置为“开”。
中文 77 |
| 78 中文
07 附录
接,光盘播放将会停止。
• 只有在 FAT 文件系统(DOS 8.3 卷标)中格式化的 USB 设备受
支持。
建议您使用支持 USB 2.0 协议且具有 4 MB/秒或更高读/写速度
的 USB 设备。
设置 • 格式化存储设备后,“继续播放”功能可能无法正常工作。
• “BD 数据管理”的总可用大小可能会因条件而异。
Anynet+ (HDMI-CEC)
• 根据电视,某些 HDMI 输出分辨率可能不起作用。请参阅电视
的用户手册。
• 如果 HDMI 电缆不支持 CEC,则此功能不可用。
• 如果 Samsung 电视有 Anynet+ 徽标,则它支持 Anynet+ 功
能。
设备管理器
• 如果 BONUSVIEW 部分不包含任何 BONUSVIEW 音频设置,则
◄► 指示符不会显示在屏幕上。
媒体播放 • 音频语言功能的可用语言取决于光盘中的编码语言。此功能或
特定语言可能不可用。
• 一些 Blu-ray 光盘可能允许您选择英语的 PCM 或 Dolby 数字音
频音轨。
中文 79 |
| 80 中文
Blu-ray 光盘
内容类型
07 附录
电子内容/
设置 数字内容
BD Wise Blu-ray 光盘分辨率 1080p
超高清输出 :
2160p@24F 2160p@24F
自动
电影帧 : 自动
自动 超高清输出 :
1080p@24F 1080p@24F
关
电影帧 : 关 电视输入最大分辨率 电视输入最大分辨率
电影帧 : 自动 (24Fs)
1080p@24F 1080p@24F
※ 仅限 1080p 和 1080i
1080p 1080p 1080p
1080i 1080i 1080i
720p 720p 720p
576p/480p 576p/480p 576p/480p
DVD
内容类型
设置
BD Wise 576i/480i
超高清输出 :
2160p@24F
自动
DVD 24Fs 转换 : 自动
电影帧 : 自动 超高清输出 :
自动 1080p@24F
关
DVD 24Fs 转换 : 关 电视输入最大分辨率
电影帧 : 关 电视输入最大分辨率
电影帧 : 自动 (DVD 24Fs 转换 : 自动 )
1080p@24F
※ 仅限 1080p 和 1080i
1080p 1080p@60F
1080i 1080i
720p 720p
576p/480p 576p/480p
中文 81 |
| 82 中文
07 附录
源码
PCM
(Dolby
D 重新编
设置 源码(未处理) (DTS 重
新编码)
码)
支持 支持 支持 HDMI 支持 HDMI
连接 HDMI 的 光纤 HDMI 的 光纤 的 AV 接收 的 AV 接收
AV 接收器 AV 接收器 器或光纤 机或光纤
最多
PCM 2 PCM 2 重新编码 重新编码
PCM PCM 7.1 PCM
声道 声道 DTS 杜比数码*
声道
最多
PCM 2 杜比数 杜比数 重新编码 重新编码
杜比数码 PCM 7.1
声道 码 码 DTS 杜比数码*
声道
最多 杜比数
杜比数码 PCM 2 杜比数 重新编码 重新编码
PCM 7.1 码加强
加强版 声道 码 DTS 杜比数码*
声道 版
Blu-ray 最多
Dolby PCM 2 Dolby 杜比数 重新编码 重新编码
光盘上的 PCM 7.1
TrueHD 声道 TrueHD 码 DTS 杜比数码*
音频流 声道
最多
PCM 2 重新编码 重新编码
DTS PCM 6.1 DTS DTS
声道 DTS 杜比数码*
声道
DTS-HD 最多 DTS-HD
PCM 2 重新编码 重新编码
高分辨率 PCM 7.1 高分辨 DTS
声道 DTS 杜比数码*
音频 声道 率音频
DTS-HD 最多 DTS-HD
PCM 2 重新编码 重新编码
Master PCM 7.1 Master DTS
声道 DTS 杜比数码*
Audio 声道 Audio
中文 83 |
07 附录
问题 解决方案
不能使用遥控器执行任何操 • 检查遥控器中的电池。它们可能需要更换。
作。 • 在离播放器不超过 6.1 米的距离内操作遥控器。
• 取出电池并按下一个或多个按钮几分钟以使遥控
器中的微处理器完全放电,这样来重设遥控器。
重新安装电池并重试操作遥控器。
光盘不播放。 • 请确保安装光盘时标签向上。
• 检查 Blu-ray 光盘/DVD 的地区代码。
光盘菜单不出现。 • 请确保光盘有光盘菜单。
禁止消息出现在屏幕上。 • 当按无效的按钮时,此消息就会出现。
• Blu-ray 光盘/DVD 的软件不支持该功能(例如,
视角)。
• 您请求了超出范围的标题号、章节号或搜索时间。
播放模式不同于“设置菜 • 在“设置菜单”中选择的一些功能可能无法正常
单”选择。 工作(当光盘未用相应的功能编码时)。
屏幕比例无法更改。 • 屏幕比例在 Blu-ray 光盘/DVD 上是固定的。
• 这并非是播放器存在问题。
无音频。 • 请确保在“音频选项”菜单中选择了正确的“数
字输出”。
中文 85 |
| 86 中文
07 附录
可以看到 AllShare 共享文件 • AllShare 仅显示视频、照片和音乐文件。不显示
夹,但看不到文件。 其他类型的文件。
视频播放断断续续。 • 检查网络是否稳定。
• 检查网络电缆连接是否正确,以及网络是否超
载。
• AllShare 兼容设备与播放器之间的无线连接不稳
定。
请检查连接。
播放器与计算机之间的 • 相同子网中的 IP 地址应该是唯一的。
AllShare 连接不稳定。 如果不是,IP 冲突会引发此种现象。
• 检查是否已启用防火墙。
如果已启用,请禁用防火墙功能。
BD-LIVE
我无法连接至 BD-LIVE 服务 • 使用网络状态摂功能测试网络连接是否正常工
器。 作。(请参阅第 31 页)
• 检查 USB 内存设备是否已连接到播放器。
• 存储设备至少必须有 1GB 可用空间才能容纳 BD-
LIVE 服务。
可以在“BD 数据管理”中检查可用空间大小。
(请参阅第 31 页)
• 请检查“BD-LIVE Internet 连接”选项是否设置
为“允许(全部)”。
• 如果上述检查结束后问题仍然存在,请与内容提
供商联系或为播放器更新最新固件。
中文 87 |
| 备注 |
\ 恢复出厂默认设置时,将会删除所有存储的用户 BD 数据。
维修
如果联系我们对播放器进行维修,在下列情况下可能需要支付管理
费:
1. 请求工程师到您家中维修,并且发生的问题并非产品缺陷。
2. 您将机组带至维修中心,但不存在产品缺陷。
进行家庭现场维修或开始维修播放器前,我们会声明管理费用数额。
我们建议您先全面阅读此手册,在线访问 www.samsung.com 搜索解
决方案,或者联系 Samsung 客户中心,然后再寻求对播放器进行维
修。
| 88 中文
1.7 公斤
07 附录
重量
430(宽)X 201(厚)X 43(高)(毫
尺寸
常规 米)
操作温度范围 +5°C 至 +35°C
操作湿度范围 10 % 至 75 %
类型 A USB 2.0
USB
DC 输出 最大 5V 500mA。
2D:2160p、1080p、1080i、720p、
视频 576p/480p
HDMI
3D:1080p、720p
音频 PCM 或源码
前左/前右、中间、超重低音、左环绕
7.1 声道 声/右环绕声、
音频输出
左后环绕声/右后环绕声
数字音频输出 光纤
互联网 100BASE - TX 端子
无线 LAN 内置
WEP (OPEN/SHARED)
网络
安全 WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC) 支持
执行标准 Q/12JD 5958 蓝光播放机
• 不支持等于或低于 10Mbps 的网络速度。
• 设计和规格可能会随时更改,恕不提前通知。
• 对于电源和功耗,请参阅贴在播放器上的标签。
• 重量和尺寸均为近似值。
• 碱性及非碱性锌-二氧化锰电池中 汞、镉、铅含量的限制要求
- 标准 : GB/T 8897.2-2008
- 注意:使用前请确认电池正负极。请勿将电池拆卸、焚烧或充
电。不同种类电池不可混用。长期不用时,请取出电池。
- 含量汞 : "低汞" 或 "无汞"
中文 89 |
产品内有害物质信息
有毒有害物质元素
多溴联 多溴二
部件名称 六价铬
铅(Pb) 汞 (Hg) 镉 (Cd) 苯 苯醚
Cr(VI)
(PBB) (PBDE)
印制电路板
X O O O O O
组件
金属部品 X O O O O O
电缆 X O O O O O
塑料部品 O O O O O O
O : 部品中有毒有害物质含量在 < 含量标准 > 的标准值内
X : 部品中有毒有害物质含量超出 < 含量标准 > 的标准值
本表格表明机器内部含有有害物质,数据是根据部件类型,由部件
制作商提供并在三星电子内部验证后做成的。
某些部品包含的有害物质,按照现在的技术基准不能替代,三星电
子一直在为改善此项而努力。
| 90 中文
07 附录
藏文
维文
壮文
Hai dou gaxgonq, wngdang sien duenh denvasen bae.
汉文 仅适用于非热带气候条件下安全使用。
蒙古文
藏文
维文
壮文 Dan hab yungh youq gij dienheiq diuzgen mbouj dwg diegndat
haenx ancienz sawjyungh.
- 如果您对三星产品有任何咨询或建议请与三星客户服务中心联系
电话:400-810-5858
网址:www.samsung.com/cn/support
地址: 北京市朝阳区利泽中二路二号B座三层(望京科技园内)
三星电子(北京)技术服务有限公司
邮编:100102
产地:中国
生产者:惠州三星电子有限公司
厂址:广东省惠州市仲恺高新技术产业开发区陈江街道仲恺六路
256号
企业标准编号:Q/HZSX 05-2013
中文 91 |
AK68-02355Q-08 AK68-02355Q-08
AK68-02355Q