Professional Documents
Culture Documents
Mini Hi-Fi
System
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
CL98 (CL98, NL98F)
MFL71261060 www.lg.com
1905_Rev01 Copyright © 2019-2021 LG Electronics Inc. All Rights Reserved.
2 Getting Started
Safety Information
1 CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Getting Started
CAUTION concerning the Power Cord CAUTION: No naked flame sources, such as lighted
The Power Plug is the disconnecting device. In case candles, should be placed on the apparatus.
of an emergency, the Power Plug must remain readily
Symbols
accessible.
Check the specification page of this owner’s manual 1
to be certain of the current requirements.
~ Refers to alternating current(AC).
Getting Started
Do not overload wall outlets. Overloaded wall outlets, 0 Refers to direct current(DC).
loose or damaged wall outlets, extension cords,
Refers to class II equipment.
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions 1 Refers to stand-by.
could result in electric shock or fire. Periodically
examine the cord of your device, and if its appearance ! Refers to “ON” (power).
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord Refers to dangerous voltage.
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct.
* speaker duct: A hole for plentiful bass sound on
speaker cabinet (enclosure)
4 Table of Contents
Table of Contents
1
30 Sound adjustment 4 Troubleshooting
30 – Setting the sound mode
30 – Setting the USER EQ 41 Troubleshooting
31 – JUKE BOX Playback 41 – General
42 – NOTES to release Demo mode
32 Other Operations 2
32 – Turn off the sound temporarily
32 – CHILDSAFE Mode 5 Appendix
32 – DEMO
32 – Resume stop 43 General specifications
33 – Using Microphone 44 Speakers specifications 3
35 – LIGHTING 44 Trademarks and Licenses
36 – Sleep Timer Setting 45 Maintenance
36 – Dimmer 45 – Notes on Discs
36 – Auto power down 45 – Handling the Unit
37 – AUTO POWER On 4
37 – Auto function change
38 Setting the Clock
38 – Setting the Clock through “LG XBOOM” App
38 – Using your player as an alarm clock
39 LG Sound Sync 5
40 WIRELESS PARTY LINK Connection
6 Getting Started
Unique Features
BLUETOOTH®
1
Listens to music stored on your Bluetooth device.
Getting Started
Playback effects
Listens to music with various sound and playback
effects.
LG XBOOM
LG XBOOM is an app designed to let you take control
of some of LG’s latest audio devices.
(Page 27-28)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started 7
Getting Started
USB devices.
MP3/WMA file compatibility with this unit is limited
as follows. USB device requirement
yy Sampling frequency: within 32 to 48 kHz (MP3), yy Devices which require additional program
within 32 to 48 kHz (WMA) installation when you have connected it to a
yy Bit rate: within 32 to 320 kbps (MP3), computer, are not supported.
40 to 192 kbps (WMA) yy Do not extract the USB device while in operation.
yy Maximum files: Data CD: 999 / USB: 2,000 yy For a large capacity USB, it may take longer than a
yy Maximum folders: Data CD: 99 / USB: 200 few minute to be searched.
yy File extensions: “.mp3”/ “.wma” yy To prevent data loss, back up all data.
yy Certain MP3/WMA files may not be played yy If you use a USB extension cable or USB hub, the
depending on the type or format of the file. USB device is not recognized.
yy CD-ROM file format: ISO 9660/ JOLIET yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system. yy This unit recognizes up to 2,000 files.
yy A protected file by DRM (Digital rights yy External HDD, Card readers, Locked devices, or
management) cannot be played on the unit. hard type USB devices are not supported.
yy The DTS disc is not supported. yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG yy Some USB may not work with this unit.
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System: Disc format system for
Windows Vista)
8 Getting Started
Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby): Turns the power on or off.
B (Open/Close): Opens and closes the disc tray.
1 VOL (Volume) +/-: Adjusts speaker volume.
F (Function): Selects the function and input source.
Getting Started
(R03)
• • • • • • • • • • • • • • b• • • • • • • • • • • • • • • • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT: Listens to your tracks/files repeatedly or 0 to 9 numerical buttons: Selects numbered tracks,
randomly. files, or preset number.
TUNING-/+: Selects the radio stations. CLOCK: Sets a clock and checks a time.
1
C/V (Skip/Search): ALARM: With the ALARM function you can turn on
Getting Started
-- Skips backward or forward. CD, USB play and tuner reception at a desired time.
-- Searches for a section within a track/file. • • • • • • • • • • • • • • d• • • • • • • • • • • • • •
N (Play/Pause): VOICE CANCELLER: You can reduce the vocal tones
-- Starts or pauses playback. during music playback from various input sources.
-- Selects stereo/mono. SLEEP: Sets the system to turn off automatically at
a specified time.
Z (Stop):
(Dimmer: The display window will be darkened by
-- Stops playback. half.)
-- Cancels DELETE function. SET: Confirms the setting.
EQUALIZER: Chooses sound impressions. KEY CHANGER (L/l): Changes the key to suit your
SPECIAL EQ: Chooses special equalizer. vocal range.
J (Information): MIC (Microphone) ECHO: Selects ECHO mode.
-- Sees information about your music. An MP3 file ?: This button is not available.
often come with ID3 tag. The tag gives the Title, VOCAL EFFECTS: Selects various vocal effects
Artist, Album or Time information. mode.
-- Sees Bluetooth device name of the unit in BT ?: This button is not available.
READY.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
10 Getting Started
Front panel
a b c d e
1
Getting Started
n f
m l k ji h g
Getting Started
playback.) Press a desired sound pad.
N (Play/Pause) n DJ SCRATCHER / LEVEL CONTROL & SEARCH
-- Starts or pauses playback. -- T urns clockwise or counterclockwise to make
-- Selects stereo/mono. scratch sound.
V (Skip/Search) -- T urns clockwise or counterclockwise to control
the USER EQ level.
-- Skips forward.
-- Searches a folder or a file.
-- Searches for a section within a track/file.
-- Adjust DJ EFFECT level.
-- Selects the radio stations.
DJ EFFECT
PARTY ACCELERATOR MODE
Selects a desired DJ EFFECT.
Selects PARTY ACCELERATOR MODE.
SEARCH
j Disc tray
Moves to folder or file in selection mode.
k PARTY ACCELERATOR lever
OK
Slide the lever to create a party atmosphere.
Selects a folder when searching a file.
l DEMO
USER EQ
In power off status, if you press DEMO, show
DEMO mode. Selects the equalizer created by your own.
SPECIAL EQ / BASS BLAST (or BASS BLAST+)
-- Chooses special equalizer.
-- Press and hold to select BASS (or BASS+) effect
directly.
Z (Stop)
Stops playback or cancels DELETE function.
C (Skip/Search)
-- Skips backward.
-- Searches for a section within a track/file.
-- Selects the radio stations.
B (Open/Close)
Opens and closes the disc tray.
12 Getting Started
Rear panel
1
Getting Started
150 150
b c d e
Getting Started
Initial setting of this function was OFF Press and hold N for 5 seconds in BT
set to off. (Bluetooth) function.
Auto Power On It allows the unit to turn on ON Turn off the unit by pressing 1 on the unit
(Page 37) automatically by input signals: for 5 seconds.
BT (Bluetooth) or LG TV OFF Turn off the unit by pressing 1 on the unit
for 5 seconds.
14 Connecting
150 150
Connecting 15
Connecting
To connect the speaker light cable to the unit, vibration caused by the speakers.
insert the cable to SPEAKER LIGHTING SYSTEM
connectors on the unit.
150 150
20 cm 20 cm
150 150
White
Audio cable
Red
,,Note
Automatically switches to the AUX 1 function
when you connect the portable device to the
AUX IN 1 connector.
Connecting 17
Connecting
150 150
USB 1 USB 2
FM antenna
,,Note
Removing the USB device from the unit: ,,Note
1. Choose a different function/mode or Be sure to fully extend the FM wire antenna.
press Z twice in a row.
2. Remove the USB device from the unit.
18 Operating
Operating
desired folder appears.
2. Select the file you want by using C/V.
3. Press N to play it.
On Display Description
Select the file you want to
DEL FILE
delete.
Select the folder you want to
DEL DIR
delete.
3
FORMAT Select to format the USB device.
Operating
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
Operating 21
Operating
between 0 to 15.
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT key on the unit
is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
yy According to effect level and application time,
the DJ EFFECT may not effect when the DJ
effect cover the original sound.
22 Operating
AUTO DJ DJ PAD
AUTO DJ blends the end of one song into the It allows you to mix CLUB, DRUM or USER sound
beginning of another for seamless playback. effect. Each mode has up to 4 sounds effect.
It equalizes volume across tracks/files for 1. Press and hold DJ PAD (CLUB, DRUM or USER)
uninterrupted playback. on the unit to select a desired DJ PAD sound
Press AUTO DJ on the remote control repeatedly, the effect.
display changes as followings. 2. Press DJ PAD (1, 2, 3, 4) of desired sound on
SHUFFLE SEQUENTIAL OFF the unit.
this mode.
yy DJ PAD mode is displayed for 3 seconds
when you press DJ PAD (CLUB, DRUM or
,,Note USER) on the unit.
yy AUTO DJ mode does not support searching
for a section within a track/file or to play yy The DJ PAD sound is mixed when you press
repeatedly or randomly. DJ PAD (1, 2, 3, 4) on the unit.
yy If you move to other functions or stop the yy The currently playing DJ PAD sound is
music using Z on AUTO DJ mode, AUTO DJ stopped and the selected DJ PAD sound
will be disabled. outputs if you press a different DJ PAD
(1, 2, 3, 4) on the unit while DJ PAD sound
yy AUTO DJ is not supported in the music file is playing.
whose length is less than 60 seconds.
yy Only SEQUENTIAL is selected when played
JUKE BOX list.
Operating 23
DJ LOOP
The certain section (about 1 sec) of sound is
repeatedly played. (CD, USB Only)
During playback, press and hold DJ LOOP on the unit
at the point you want. And you can cancel DJ LOOP
function by releasing it.
,,Note
This function is released after operating 10
times or releasing DJ LOOP on the unit.
PARTY ACCELERATOR
It allows you to create a party atmosphere. 3
1. Select the mode by pressing PARTY
Operating
ACCELERATOR MODE on the unit.
The sound effect will react differently according
to the mode.
MODE 1 MODE 2 USER
2. After selecting the mode, slide up the lever of
PARTY ACCELERATOR on the unit to create a
party atmosphere.
The sound effect will react according to moving
the lever of PARTY ACCELERATOR on the unit.
OFF ACCEL 1 ACCEL 2 CLIMAX
,,Note
If you want to use USER, you have to register
a source with “LG XBOOM” app. If the source is
not register to USER, “EMPTY” or “NO SOUND”
appears on the display window.
24 Operating
yy Available Devices: Smart phone, MP3, Notebook, 2. Operate the Bluetooth device and perform the
etc. pairing operation. When searching for this unit
yy Version: 4.0 with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
yy Codec: SBC, AAC
depending on the type of Bluetooth device. Your
Bluetooth Profiles unit appears as “LG CL98 (XX)”.
Operating
connect the Bluetooth device to the unit
yy When using Bluetooth technology, you have
again.
to make a connection between the unit and
the Bluetooth device as close as possible and yy When a Bluetooth device is not connected,
keep the distance. “BT READY” appears on the display window.
However, it may not work well in certain yy When you use the BT (Bluetooth) function,
situations as described below: adjust the volume to a proper level on the
-- There is an obstacle between the unit and Bluetooth device.
the Bluetooth device. yy When you connect Bluetooth device (iOS
-- There is a device using same frequency device etc.) to this unit or operate the device,
with Bluetooth technology such as a the volume level can be synchronized with
medical equipment, a microwave or a each other.
wireless LAN device. yy Bluetooth connection will be disconnected
yy If Bluetooth connection does not work well, when you change the BT (Bluetooth)
try pairing it again. function to some other function. In “LG
XBOOM” app connection, only one device
yy Even if this unit is connected up to 3
which you are playing keeps Bluetooth
Bluetooth devices in the Bluetooth mode,
connection. You can control the Bluetooth
you can play and control music by using only
device with this unit but you cannot use
one of the connected devices.
sound output.
yy When entering the BT (Bluetooth) function,
this unit automatically connects to the last
connected Bluetooth device or the device
which played back last.
(Auto connection may not be supported
depending on the connected device
specifications.)
26 Operating
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
,,Note
Even if you set up Bluetooth connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
(Page 37)
Operating 27
Operating
To enjoy more features, you are recommended to 2. Tap an icon for installation.
download and install free “LG XBOOM” app.
Below introduces you to a feature of “LG XBOOM” ,,Note
app. yy Make sure that your Bluetooth device is
connected to the Internet.
Multi Juke box: Your entertainment increases three
fold when you connect up to 3 Bluetooth phones yy Make sure that your Bluetooth device
at the same time. Play music from three phones and has a scanning software application. If you
create a customized playlist from all phones. don’t have one, download one from “Google
Android Market (Google Play Store)”.
Sampler Creator : Record effects on your
smartphone and very simply sync them via yy Depending on the area, QR code may not
Bluetooth to the system. Be as creative as you can work.
be.
28 Operating
Operating
C/V on the unit repeatedly. 7. To listen a preset station,
3. Adjust the volume by pressing VOL +/- on the press PRESET·FOLDER W/S or 0 to 9
remote control or rotating MASTER VOLUME numerical buttons on the remote control.
knob on the unit repeatedly.
Deleting all the saved stations
Improving poor FM reception
1. Press DELETE on the remote control.
Press N. This will change the tuner from stereo to “DEL ALL” will flash up on the unit display.
mono and usually improve the reception. 2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will scroll on the display window.
30 Operating
Operating
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control to Deleting JUKE BOX list
select the JUKE BOX program number.)
Deleting function works in the edit mode.
5. Press JUKEBOX/MEMORY on the remote
control once again. 1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
To play the JUKE BOX list, press N on the remote
control after you make the list. Or
Press DELETE on the remote control while JUKE
,,Note BOX is played to enter the edit mode.
When making or modifying the JUKE BOX list, 2. Select a song by pressing PRESET·FOLDER
REPEAT mode is off. W/S on the remote control repeatedly.
3. Press DELETE on the remote control while a
Enjoying JUKE BOX song is selected.
,,Note
In case of CD, USB or BT (Bluetooth) function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.
Operating 33
Operating
yy This function is available to use only when a
yy If sound through the microphone is extremely microphone is connected.
loud, it may be distorted. yy If a microphone is not connected, “INSERT
In this case, pressing MIC VOL - on the unit. MIC” appears in the display window.
yy You can give an echo effect to the sound yy It is not available on the mono source.
from the microphones by pressing MIC
ECHO. yy To initialize it, change the function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
34 Operating
ECHO LIGHTING
When you connect your microphone to the MIC jack, This function offers a party atmosphere by operating
you can give an echo effect to the sound from the the lighting on the unit.
microphones by pressing MIC ECHO.
Press LIGHTING on the unit repeatedly or press
ECHO 1 ECHO 2 OFF LIGHTING on the unit and then turn MASTER
,,Note VOLUME on the unit.
yy If a microphone is not connected, “INSERT PARTY WATER FOREST (MY STYLE)
MIC” appears in the display window. OFF
yy If you press VOCAL EFFECTS on ECHO
mode, after backing up current ECHO,
,,Note
yy Lighting function is available in all functions.
turn off ECHO mode and operate VOCAL
EFFECTS mode. yy Lighting mode retains in its previous mode
To operate ECHO mode, press MIC ECHO when you first press LIGHTING on the unit,
again, after backing up current VOCAL press again to change modes.
3
EFFECTS. yy If you want to use MY STYLE, you have to
register a source with “LG XBOOM” app.
Operating
yy Do not look directly at the light emitting part
when the LIGHTING is turned on.
yy If the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING
of the unit.
yy You can also turn off the light by pressing
and holding LIGHTING on the unit.
36 Operating
,,Note ,,Note
All the lighting turns off when dimmer is being
yy You can check the remaining time before the operated.
unit is turned off. Press SLEEP on the remote
control to check or change the remaining
time. Auto power down
yy You can edit the remain time when the
remaining time or “DIMMER” is displayed. This unit will turn itself off to save electricity in the
3 case were the main unit is not connected to an
external device and is not used for 15 minutes.
Operating
The unit will also turns itself off after six hours if
the main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MAIN
unit in case of WIRELESS PARTY LINK connection.
In case of OTHER unit, Auto power down is available
after disconnection OTHER unit and MAIN unit.
Operating
AUTO POWER function is
ON - AUTO POWER
turned on.
When LG TV is connected
AUTO POWER function is
OFF - AUTO POWER
turned off. When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
,,Note
yy Depending on the connected device, this
function may not operate.
,,Note
yy This function is not available during recording
yy Depending on the connected device, the unit or deleting.
turns on but BT(Bluetooth) function may not yy This function only works with devices that
be connected. were previously connected.
yy If you disconnect Bluetooth connection by yy If the Bluetooth connection lock function is
this unit, some Bluetooth devices try to set, Bluetooth and LG TV connection will be
connect to the unit continually. Therefore it is only available on BT(Bluetooth) and LG TV
recommended to disconnect the connection function. (Page 26)
before turning off the unit.
yy If you try to connect to the “LG XBOOM”
app, BT(Bluetooth) function of this unit is
turned on.
yy If you turn on the unit using LG TV or
BT(Bluetooth) function, proper function of
this unit is turned on.
yy If you have already paired with this unit, this
unit can automatically turn on by an input
source when this unit is turned off.
38 Operating
remote control. the volume and press SET on the remote control
8. Press SET on the remote control. to save.
Refer to the TV’s instruction manual for the details of -- The unit is turned off.
LG Sound Sync. -- Changing to a different function.
1. Turn on the unit by pressing 1. -- Disconnecting the wireless connection 3
2. Press F until LG TV function is selected. caused by interference or a distance.
Operating
3. Set up the sound output of TV to listen to the yy The amount of time to turn off this unit is
sound through this unit: different depending on your TV.
TV setting menu [Sound] [TV Sound output] yy If you try to change the function on using
[LG Sound Sync (Wireless)] the LG TV function, volume will be changed
according to the LG TV volume level.
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV” yy Details of TV setting menu vary depending on
on the display window if the TV and this unit are models of your TV.
connected normally. yy If you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the TV version.
yy If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
40 Operating
Troubleshooting
General
Troubleshooting
Speaker cables connected correctly.
yy An unplayable disc is inserted. Check the playable disc.
yy No disc is inserted. Insert a disc.
The unit does not start yy The disc is dirty. Clean the disc. (Page 45)
playback
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
The AUTO POWER yy Check connection of the external device such as TV or Bluetooth device.
function does not work yy Depending on the connected device, this function may not operate.
4
NOTES to release Demo mode
Troubleshooting
General specifications
General
Power requirements Refer to the main label on the unit.
Power consumption Refer to the main label on the unit.
Dimensions (W x H x D) Approx. 450.0 mm x 167.0 mm x 332.0 mm
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 60 % RH
Inputs
Analog audio in (AUX IN 2) 3.5 Vrms, RCA jack (L, R)
Portable in (AUX IN 1) 1.8 Vrms (3.5 mm stereo jack)
Microphone (MIC 1/2) Sensitivity 20 mV, 6.3 mm jack x 2
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
System
Frequency Response 80 to 20,000 Hz
Signal-to-noise ratio More than 75 dB 5
Dynamic range More than 80 dB
Appendix
Bus Power Supply (USB) 5 V 0 500 mA
Speakers specifications
Front speaker
HIGH : 2 Way 2 Speaker
Type MID : 1 Way 1 Speaker
LOW : 1 Way 1 Speaker
HIGH : 6 Ω
Impedance MID : 6 Ω
LOW : 6 Ω
HIGH : 590 W RMS
Rated Input Power MID : 590 W RMS
LOW : 570 W RMS
HIGH : 1,180 W RMS
Max. Input power MID : 1,180 W RMS
LOW : 1,140 W RMS
Dimensions (W x H x D) Approx. 460.0 mm x 698.0 mm x 394.0 mm
4
yy Design and specifications are subject to change without notice.
Troubleshooting
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
Appendix 45
Appendix
For details, please contact your nearest authorized
service center.