Professional Documents
Culture Documents
Wireless
Sound Bar
MODEL
SJ2 (SJ2, SPJ2BM-W)
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
2107_Rev01
2 Getting Started
apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) WARNING: Do not install this equipment in a
NO USER-SERVICEABLE PARTS INSIDE REFER confined space such as a book case or similar unit.
SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
This lightning flash with arrowhead malfunction due to electrical shock.
symbol within an equilateral CAUTION: No naked flame sources, such as lighted
triangle is intended to alert the candles, should be placed on the apparatus.
user to the presence of uninsulated
dangerous voltage within the CAUTION: Do not block any ventilation openings.
product’s enclosure that may be of Install in accordance with the manufacturer’s
sufficient magnitude to constitute instructions.
a risk of electric shock to persons. Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
The exclamation point within an the product and to protect it from over heating.
equilateral triangle is intended The openings shall never be blocked by placing
to alert the user to the presence the product on a bed, sofa, rug or other similar
of important operating and surface. This product shall not be placed in a built-
maintenance (servicing) in installation such as a bookcase or rack unless
instructions in the literature proper ventilation is provided or the manufacturer’s
accompanying the product. instruction has been adhered to.
Getting Started 3
CAUTION concerning the Power Cord This device is equipped with a portable battery or
The Power Plug is the disconnecting device. In case accumulator.
of an emergency, the Power Plug must remain readily How to Safely remove the batteries or the
accessible. battery pack from the equipment: To Remove the
Check the specification page of this owner’s manual
old batteries or battery pack, follow the assembly 1
steps in reverse order. To prevent contamination of
to be certain of the current requirements.
Getting Started
the environment and bring on possible threat to
Do not overload wall outlets. Overloaded wall outlets, human and/or animal health, the old batteries or the
loose or damaged wall outlets, extension cords, frayed battery pack must be put in an appropriate container
power cords, or damaged or cracked wire insulation at designated collection points. Do not dispose
are dangerous. Any of these conditions could result of batteries or battery pack together with other
in electric shock or fire. Periodically examine the waste. It is recommended that you use local, free
cord of your device, and if its appearance indicates reimbursement systems batteries or battery packs,
damage or deterioration, unplug it, discontinue use of (may not be available in your area). The batteries or
the device, and have the cord replaced with an exact the battery pack should not be exposed to excessive
replacement part by an authorized service center. heat such as sunshine, fire or the like.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identification and power supply ratings,
please refer to the main label on the bottom or the
other surface of the product.
4 Getting Started
Symbols
1 Refers to stand-by.
Table of Contents
1
1 Getting Started 3 Operating
2 Safety Information 18 Basic operations
6 Unique features 18 – USB operation
6 Introduction 18 Other operations
2
6 – Symbols used in this manual 18 – DRC (Dynamic Range Control)
7 Remote control 18 – Turn off the sound temporarily
8 Front panel 18 – Using your TV remote control
8 Rear panel 19 – Auto display Dimmer
9 About LED condition 19 – Auto power down
3
11 Installing the sound bar 19 – AUTO POWER On/Off
20 – Auto function change
21 Using Bluetooth® technology
2 Connecting 21 – Listening to music stored on the Bluetooth
12 Wireless subwoofer connection devices 4
13 How to affix the ferrite core 22 – BLUETOOTH connection lock (BT lock)
13 – Affix the ferrite core for power cord 23 Sound adjustment
14 Connecting to your TV 23 – Setting the surround mode
14 – Using an OPTICAL cable 23 – Adjust the woofer level settings
14 Optional equipment connection 5
14 – OPT. IN connection
4 Troubleshooting
15 – PORT. IN connection
15 – USB connection 24 Troubleshooting
15 – Compatible USB devices 24 – General
16 – USB device requirement 25 – NOTES to use wireless
16 – Playable file
5 Appendix
26 Trademarks and licenses
27 Specifications
28 Maintenance
28 – Handling the unit
6 Getting Started
energy consumption.
Indicates special notes and operating features.
Portable In
Listen to music from your portable device. >>Caution
(MP3 player, Notebook, Smart phone, etc..) Indicates cautions for preventing possible damages
from abuse.
BLUETOOTH®
Listen to music stored on your Bluetooth device.
USB playback
Listen to music stored on your USB device.
Getting Started 7
Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby) : Switches the unit ON or OFF
F (Function) : Selects the function.
OPTICAL : Selects the optical function. 1
[(Mute) : Mutes the sound.
Getting Started
STANDARD : Selects standardized sound.
BASS BLAST: Reinforces the bass and powerful
sound.
VOL (Volume) o/p : Adjusts speaker volume.
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
-- Searches for a section within a file.
N (Play/Pause) :
-- Starts playback.
-- Pauses playback.
DRC ON/OFF :
-- Turns on or off DRC function. (Page 18)
-- Controls this unit using TV remote. (Page 18)
WOOFER LEVEL o/p : Adjusts sound level of
subwoofer.
AUTO POWER ON/OFF :
Replacement of battery -- Turns on or off AUTO POWER function.
(Page 19)
-- Turns on or off the Bluetooth connection lock
function. (Page 22)
Front panel
1
Getting Started
Rear panel
Getting Started
OPTICAL LED turns on. OPTICAL function is selected.
,,Note
yy When you press any button, standby LED (Red) on the main unit blinks.
yy When you press [(Mute) button, standby LED (Red) blinks slowly.
yy When this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.
yy When this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.
yy When you press volume (o/p) button continually, standby LED (Red) blinks quickly.
10 Getting Started
company’s product.
OFF Press and hold DRC OFF on the remote
Initial setting of this function control for about 2 seconds.
was set to on.
The standby LED (Red) blinks once.
BT Lock On/Off It allows you to connect a ON Press and hold AUTO POWER ON on the
(Page 22) Bluetooth device only on remote control for about 2 seconds in
Bluetooth functions. Bluetooth function.
Initial setting of this function The standby LED (Red) blinks once.
was set to off. OFF Press and hold AUTO POWER OFF on
the remote control for about 2 seconds in
Bluetooth function.
The standby LED (Red) blinks once.
Auto Power It allows the unit to turn on ON Press AUTO POWER ON on the remote
On/Off and off automatically by input control.
(Page 19) signals : The standby LED (Red) blinks once.
Optical or Bluetooth.
OFF Press AUTO POWER OFF on the remote
Initial setting of this function control.
was set to on.
The standby LED (Red) blinks once.
Getting Started 11
Getting Started
device you want. (Page 12 - 15)
You can place the wireless subwoofer anywhere in
your room. But it is better to place the subwoofer
near the main unit. Turn it slightly toward the center
of the room to reduce the wall reflections.
>>Caution
yy For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yy Be careful not to make scratches on the
surface of the Unit / Subwoofer when
installing or moving them.
,,Note
For the convenient button usage, it is
recommended to have some distance between
the soundbar and your TV when you install the
sound bar.
12 Connecting
Connecting
-- There is a device using same frequency eliminate electrical interference.
with this wireless connection such as
1. Pull the stopper [a] of the ferrite core to open.
a medical equipment, a microwave or a
wireless LAN device. 2. Wind the power cord around the ferrite core
twice.
-- Keep the sound bar and the wireless
subwoofer away from the device (ex. 3. Close the ferrite core until it clicks.
wireless router, microwave oven, etc.) over
1 m to prevent wireless interference.
! 1m
14 Connecting
Optical
cable Optical
cable
To the digital
optical output jack of
external device
1. Connect the OPT. IN jack on the back of the unit
2. Select the input source to Optical by
to OPTICAL OUT jack of your external device.
pressing OPTICAL on the remote control or F
repeatedly. 2. Select the input source to Optical by
pressing OPTICAL on the remote control or F
You can see OPTICAL LED turns on. Then optical
repeatedly.
function is selected.
You can see OPTICAL LED turns on. Then optical
,,Note function is selected.
yy Before connecting the optical cable, be sure 3. Listen to sound.
to remove the protection plug cover if your
cable has the cover. ,,Note
yy You can enjoy the TV audio through the Before connecting the optical cable, be sure to
speakers of this unit. In the case of some TV remove the protection plug cover if your cable
models, you must select the external speaker has the cover.
option from the TV menu. (For details,
reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
Connecting 15
3.5 mm
stereo
cable
2
Connecting
Listening to music from your portable
player For more information of playing files on a USB, refer
The unit can be used to play the music from many to the page 18.
types of portable players or external devices.
Removing the USB Device from the unit.
1. Connect the portable player to the
PORT. IN connector of the unit by using 3.5 mm 1. Choose a different function/mode.
stereo cable. 2. Remove the USB device from the unit.
2. Select the input source to PORTABLE by pressing
F repeatedly. Compatible USB devices
You can see PORTABLE LED turns on. Then
yy MP3 Player : Flash type MP3 player.
PORTABLE function is selected.
yy USB Flash Drive : Devices that support USB 1.1.
3. Turn on the portable player or external device and
start playing it. yy The USB function of this unit does not support
some USB devices.
16 Connecting
yy The unit’s USB Port can not be connected to PC. yy Maximum directories : Under 99
The unit can not be used as a storage device. yy A protected file by DRM (Digital rights
yy The exFAT file system is not supported on this management) cannot be played on the unit.
unit. (FAT16/FAT32 systems are available.) yy Video files in the USB storage device can not be
yy Depending on some devices, it may not available to played.
recognize the followings on this unit. yy Depending on the performance of your USB
-- External HDD device, playback may not work well.
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
-- iPhone/iPod/iPad
-- Android device
Connecting 17
,,Note
yy Folders and files on the USB are recognized
as below.
: Folder
: File
a C
D
2
E
Connecting
b F
G
c H
I
d J
A
B
During playback, press V on You can control some functions of this unit by your
the remote control to go to the TV remote control even by other company’s product.
next file. Controllable functions are volume up/down and
Playing less than 2 seconds, mute.
Skip to the next/ press C on the remote Press and hold DRC ON on the remote control for
previous file control to go to the previous about 2 seconds. The standby LED blinks once. And
file. then this functions is enabled.
Playing after 3 seconds, press To turn off this function, press and hold DRC OFF
C on the remote control to about 2 seconds. The standby LED blinks once. And
go to the beginning of the file. then this functions is disabled.
Press and hold C/V on the
Search for a
section within a
remote control during playback ,,Note
and release it at the point you yy Supported TV brands
file
want to listen to. LG Panasonic Philips Samsung
This unit memorizes a current Sharp Sony Toshiba Vizio
Resume song which is played before
playback changing the function or yy Make sure that the sound output of your TV
turning off the unit. is set to [External speaker].
yy Depending on the remote control, this
,,Note function may not work well.
yy The resume point may be cleared when you yy This function does not operate on LG TV's
pull out the power cord or removing the USB magic remote control.
device from the unit.
yy If the USB function is not working, check the
USB function is selected.
yy When you pause the USB playback, USB LED
on the main unit blinks.
Operating 19
Operating
How to disconnect the wireless
yy When you turn on this unit for the first time,
network connection or the wireless Auto Power function is turned on status.
device
yy To use this function, the main unit must be
Set up the AUTO POWER ON/OFF function to off registered in paired devices list of Bluetooth
and turn off the unit. device.
yy You can set the AUTO POWER function only
AUTO POWER On/Off when this unit is turned on.
This unit automatically turns on by an input source :
Optical or Bluetooth.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the input
signal and select the suitable function. You can hear
the sound from your device.
If you try to connect your Bluetooth device, this
unit turns on and the unit will be connected your
Bluetooth device.
This function turns on or off you press
AUTO POWER ON/OFF.
20 Operating
,,Note
yy To change to optical function, it needs
5 seconds of no signal.
yy If the Bluetooth connection lock function
is set, Bluetooth connection will be only
available on Bluetooth function.
(Page 22)
Operating 21
Operating
found may appear in the Bluetooth device display
yy Available Devices : Smart phone, MP3, Notebook,
etc.. depending on the type of Bluetooth device.
Your unit appears as “LG SJ2 (XX)”.
yy Version : 4.0
yy Codec : SBC ,,Note
yy XX means the last two digits of
Bluetooth Profiles Bluetooth address. For example, if your
unit has a Bluetooth address such as
In order to use Bluetooth wireless technology,
9C:02:98:4A:F7:08, you will see
devices must be able to interpret certain profiles.
“LG SJ2 (08)” on your Bluetooth device.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile) yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
,,Note ,,Note
yy When using Bluetooth technology, you have yy When the unit is not connected with
to make a connection between the unit and Bluetooth device, Bluetooth LED will blink.
the Bluetooth device as close as possible and yy When you connect Bluetooth device (iOS
keep the distance. device etc.) to this unit or operate the device,
However it may not work well in the cases the volume level can be synchronized with
below : each other.
-- There is an obstacle between the unit and yy You can control a Bluetooth device using
the Bluetooth device. C/V (Skip) and N (Play/Pause) buttons
-- There is a device using same frequency on the remote control.
with Bluetooth technology such as a yy If you change to another function after
medical equipment, a microwave or a connecting Bluetooth, Bluetooth connection
wireless LAN device. will be disconnected. And you return to
yy If Bluetooth connection does not work well, Bluetooth function, Bluetooth connection
will be connected automatically.
3 try pairing it again.
yy The sound may be interrupted when the
Operating
Operating
yy In some of sound effect mode, some speakers,
there’s no sound or low sound. It depends on
the mode of sound and the source of audio, it
is not defective.
yy You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound file changed.
24 Troubleshooting
Troubleshooting
General
PROBLEM CAUSE & CORRECTION
yy Turn off the power of this unit and the connected external device
(TV, Woofer, DVD-player, Amplifier, etc.) and turn them on again.
The unit does not yy Disconnect the power cord of this unit and the connected external device
work properly. (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is unplugged.
Plug in the power cord.
No Power
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
Press [(Mute) or adjust the volume level to cancel the mute function.
yy When you are using connection with an external device
(set top box, Bluetooth device etc.), adjust volume level of the device.
The AUTO POWER yy Check connection of the external device such as TV, DVD/Blu-Ray player or
function does not Bluetooth device.
work. yy Depending on the connected device, this function may not operate.
Check the details below and adjust the unit according to them.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
When you feel the yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on
output sound of the TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
unit is low. yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy When any part of your body contact the transceiver of the Bluetooth device or 4
sound bar.
Troubleshooting
yy When there is an obstacle or wall or the device is installed in a secluded spot.
Bluetooth device may yy When there is a device(a wireless LAN, a medical equipment or a microwave) using
malfunction or make same frequency, make the distance between the products as far away as possible
noise in the following each other.
cases. y When to connecting the device to the Bluetooth device, make the distance
y
between the products as close as possible each other.
yy When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.
26 Appendix
5
Appendix
Appendix 27
Specifications
General
Power requirements Refer to the main label.
Refer to the main label.
Power consumption Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D) Approx. 660.0 mm x 56.0 mm x 99.0 mm with foot
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 90 %
Bus Power Supply 5 V 0 500 mA
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sampling Frequency
Available Digital Input Audio format Dolby Audio, PCM
Inputs
OPT. IN (Digital audio in) 0 dBfs, Optical jack x 1
PORT. IN (Portable in) 0.4 Vrms (3.5 mm stereo jack) x 1
Appendix
Front 30 W RMS x 2 (8 Ω at 1 kHz, 10% THD)
Subwoofer 100 W RMS (3 Ω at 100 Hz, 10% THD)
Wireless subwoofer
Power requirements Refer to the main label on the subwoofer.
Power consumption Refer to the main label on the subwoofer.
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 100 W RMS
Max. Input Power 200 W RMS
Dimensions (W x H x D) Approx. 185.5 mm x 303.0 mm x 205.0 mm
Maintenance