Professional Documents
Culture Documents
Wireless
Sound Bar
MODEL
SJ5 (SJ5, SPJ5-W)
*MFL69759811* www.lg.com
2 Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC WARNING: Do not install this equipment in a
SHOCK DO NOT REMOVE COVER (OR BACK) confined space such as a book case or similar unit.
NO USER-SERVICEABLE PARTS INSIDE REFER CAUTION: Do not use high voltage products around
SERVICING TO QUALIFIED SERVICE PERSONNEL. this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
This lightning flash with arrowhead CAUTION: No naked flame sources, such as lighted
symbol within an equilateral candles, should be placed on the device.
triangle is intended to alert the
user to the presence of uninsulated CAUTION: Do not block any ventilation openings.
dangerous voltage within the Install in accordance with the manufacturer’s
product’s enclosure that may be of instructions.
sufficient magnitude to constitute Slots and openings in the cabinet are provided
a risk of electric shock to persons. for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The exclamation point within an The openings shall be never be blocked by placing
equilateral triangle is intended the product on a bed, sofa, rug or other similar
to alert the user to the presence surface. This product shall not be placed in a built-
of important operating and in installation such as a bookcase or rack unless
maintenance (servicing) proper ventilation is provided or the manufacturer’s
instructions in the literature instruction has been adhered to.
accompanying the product.
Getting Started 3
CAUTION concerning the Power Cord This device is equipped with a portable battery or
Check the specification page of this owner’s manual accumulator.
to be certain of the power requirements for this Safety way to remove the battery from the
device. Check the specification page of this owner’s equipment: Remove the old battery or battery pack,
manual to be certain. Do not overload wall outlets. follow the steps in reverse order than the assembly. 1
Overloaded wall outlets, loose or damaged wall To prevent contamination of the environment and
Getting Started
outlets, extension cords, frayed power cords, or bring on possible threat to human and animal health,
damaged or cracked wire insulation are dangerous. the old battery or the battery put it in the appropriate
Any of these conditions could result in electric container at designated collection points. Do not
shock or fire. Periodically examine the cord of your dispose of batteries or battery together with other
device, and if its appearance indicates damage waste. It is recommended that you use local, free
or deterioration, unplug it, discontinue use of the reimbursement systems batteries and accumulators.
device, and have the cord replaced with an exact The battery should not be exposed to excessive heat
replacement part by an authorized service center. such as sunshine, fire or the like.
Protect the power cord from physical or mechanical For models using an adapter
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention Only use the AC adapter supplied with this device.
to plugs, wall outlets, and the point where the cord Do not use a power supply from another device or
exits the device. The Power Plug is the disconnecting another manufacturer. Using any other power cable
device. In case of an emergency, the Power Plug must or power supply may cause damage to the device and
remain readily accessible void your warranty.
Table of Contents
1
1 Getting Started 3 Operating
2 Safety Information 23 Basic operations
6 Unique features 23 – USB operation
6 Introduction 24 Other operations
2
6 – Symbols used in this manual 24 – AV Sync
7 Remote control 24 – Turn off the sound temporarily
8 Front panel 24 – Auto display dimmer
8 Rear panel 24 – Using your TV remote control
9 Installing the sound bar 25 – Auto power down
3
10 Mounting the main unit on a wall 25 – AUTO POWER On/Off
26 – Auto function change
27 Using BLUETOOTH® technology
2 Connecting 27 – Listening to music stored on the Bluetooth
12 Connecting the AC Adapter devices 4
12 Wireless subwoofer connection 28 – BLUETOOTH connection lock (BT Lock)
14 Connecting to your TV 29 Using BLUETOOTH App
14 – Using an OPTICAL cable 29 – Install “Music Flow Bluetooth” App onto
15 – LG Sound Sync Your BLUETOOTH Device
16 – Using an HDMI cable 29 – Activate BLUETOOTH with “Music Flow 5
18 – Additional information for HDMI Bluetooth” App
19 Optional equipment connection 31 Sound adjustment
19 – HDMI connection 31 – Setting sound effect
20 – Optical In connection 31 – Adjust volume level automatically
20 – Portable In connection 31 – Adjust the Subwoofer/Treble/Bass
21 – USB connection 31 – Night mode
21 – Compatible USB devices
21 – USB device requirement
4 Troubleshooting
22 – Playable file
32 Troubleshooting
32 – General
33 – NOTES to use wireless
5 Appendix
34 Trademarks and licenses
35 Specifications
37 Maintenance
37 – Handling the unit
6 Getting Started
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Getting Started 7
Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
F : Selects the function and the input source.
Getting Started
Optical OPT/HDMI ARC.
LG Sound Sync (Optical)
USB USB
Bluetooth BT
HDMI IN HDMI
Portable PORT.
LG Sound Sync (Wireless) LG TV
SOUND EFFECT : Selects a sound effect mode.
VOL o/p : Adjusts speaker volume.
(Night mode) : Turns on or off Night mode.
(Mute) : Mutes the sound.
: Adjusts sound level of subwoofer, treble and
bass (Refer to the page 31.)
Replacement of Battery • • • • • • • • • • • • • • b• • • • • • • • • • • • • •
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a file.
dM (Play/Pause) : Starts playback. / Pauses playback.
FOLDER o/p : Searches a folder on USB device.
REPEAT : Listens to your files repeatedly or randomly.
AUTO VOL : Turns on or off the AUTO VOLUME
mode.
Remove the battery cover on the rear of the remote
control, and insert the battery with and AV SYNC :
matched correctly. - Synchronizes the audio and video.
- Controls this unit using TV remote. (Refer to the
page 24.)
AUTO POWER :
- Turns on or off AUTO POWER function. (Refer to
the page 25.)
- Turns on or off the Bluetooth connection lock.
(Refer to the page 28.)
8 Getting Started
Front panel
1
Getting Started
Rear panel
Getting Started
device you want. (Refer to pages 14 - 22.)
>>Caution
yy For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yy Be careful not to make scratches on the
surface of the Unit / Subwoofer when
installing or moving them.
10 Getting Started
Mounting the main unit 1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach to
on a wall the position.
1
You can mount the main unit on a wall.
Getting Started
Preparation materials
Unit
Wall brackets
Screws 3. Remove the Wall bracket install guide.
(Not supplied)
Screws (A)
Wall plug
Getting Started 11
4. Fix the brackets with screws (A) as shown in the 6. Fix the unit with the screws firmly.
illustration below.
Getting Started
,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
,,Note
To detach the unit, perform it in reverse order.
(HUD-1 6 x 30) for the mounting.
3. Plug the AC power cord into an AC outlet. Green The connection is completed.
Connecting
-- There is an device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
-- Keep the sound bar and the subwoofer
-- The green LED on the rear of the wireless away from the device (ex. wireless router,
microwave oven, etc.) over 1m to prevent
subwoofer blinks quickly. wireless interference.
2. Turn on the main unit.
3. Pairing is completed.
-- The green LED on the rear of the wireless
subwoofer turns on. !P
14 Connecting
Connecting
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending on
the capabilities of your equipment.
,,Note
If you turned off the unit directly by pressing
1 on the remote control or unit., LG Sound
Sync (Wireless) will be disconnected. To use this HDMI
function again, you should reconnect the TV and cable
the unit.
Connecting
need to turn on the SIMPLINK function on -- You must use the HDMI cable (Type A, High Speed
your LG TV. HDMI™ cable with Ethernet).
yy Details of the TV settings menu may vary -- You must connect the HDMI OUT on the unit with
depending on the manufacturer or model of HDMI IN of the TV that supports ARC function
your TV. using an HDMI cable.
yy When you return to ARC function from -- You can connect only one Sound bar to TV
another function, you need to select the input compatible with ARC.
source to OPT/HDMI ARC. Then this unit
changes to ARC function automatically. What is SIMPLINK?
,,Note
yy Depending on the state of the unit, some
SIMPLINK operation may differ from your
purpose or not work.
yy Depending on a TV or a player which is
connected with this unit, SIMPLINK operation
may differ from your purpose.
18 Connecting
720 x 576p (or 480p), 1280 x 720p, 1920 x HIGH SPEED HDMI CABLE
(X)
1080i or 1920 x 1080p video input.
HIGH SPEED HDMI CABLE WITH ETHERNET
(O)
yy Not all HDCP-compatible HDMI or DVI devices will
work with this unit Connection through HDMI Cable
-The picture will not be displayed properly with Your television must support the newest HDMI
non-HDCP device. features (HDMI CEC1) / ARC (Audio Return Channel))
to fully enjoy the Live broadcasting channel with
,,Note audio system through an HDMI cable. Unless your
yy If a connected HDMI device does not accept TV supports these HDMI features, the audio system
the audio output of the player, the HDMI should be connected through an OPTICAL cable.
device’s audio sound may be distorted or may
1) HDMI CEC (High-Definition Multimedia Interface
not output.
Consumer Electronics Control)
yy Changing the resolution when the connection
Consumer Electronics Control (CEC) is an HDMI
has already been established may result in
feature designed to allow the user to command and
malfunctions. To solve the problem, turn off
control the CEC-enabled devices, that are connected
the player and then turn it on again.
through HDMI by using only one of their remote
yy When the HDMI connection with HDCP is not controls.
verified, the TV screen is changed to black.
※ Trade names for CEC are SimpLink (LG) , Anynet+
In this case, check the HDMI connection, or
(Samsung), BRAVIA Sync/ Link (Sony), EasyLink
disconnect the HDMI cable.
(Philips), EZ-Sync/ VIERA Link (Panasonic), etc..
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m (15 ft).
yy You cannot change the video resolution in the
HDMI IN mode. Change the video resolution
of the connected component.
yy If the video output signal is abnormal when
your personal computer is connected to HDMI
IN jack, change the resolution of your personal
computer to 576p (or 480p), 720p, 1080i or
1080p.
Connecting 19
HDMI connection
You can enjoy the sound and picture from HDMI
connection on external device. HDMI
cable 2
For enjoying sound only
Connecting
You can enjoy the sound from the external device you
connect.
HDMI
cable
Portable
2 MP3 player, etc... cable
Optical
cable
Connecting
Operating
If an HDMI cable is connected on the unit, -- External HDD
inserting a USB device may be hampered -- Card readers
depending on a USB device shape. -- Locked devices
-- Hard type USB devices
For more information of playing files on a USB, refer -- USB hub
to the page 23. -- Using USB extension cable
Operating
Skip to the next/ press C on the remote Plays all the songs once
previous file control to go to the previous SHUFFLE randomly, and stops the
file. playback.
Playing after 3 seconds, press
C on the remote control to
go to the beginning of the file.
Press and hold C/V
Search for a
during playback and release it
section within a
at the point you want to listen
file
to.
yy You can adjust the delay time by 10 ms. LG Panasonic Philips Samsung
Sharp Sony Toshiba Vizio
Turn off the sound temporarily yy Make sure that the sound output of your TV
is set to [External speaker].
Press (Mute) to mute your unit.
yy Depending on the remote control, this
You can mute your unit, for example, to answer the function may not work well.
telephone, “MUTE” is displayed in the display window.
yy This function does not operate on LG TV's
To cancel it, press (Mute) again on the remote magic remote control.
control or change the volume level.
yy This function may not work well when some
TV control functions such as CEC, SIMPLINK
Auto display dimmer and LG Sound Sync set to ON.
The Display window will be dimmed automatically if
there is no key input for 15 seconds.
When you press any button, the display window will
be brighten.
Operating 25
Operating
the sound from your device.
function may not operate.
If you try to connect your Bluetooth device, this
unit turns on and the unit will be connected to your yy If you disconnect Bluetooth connection by
Bluetooth device. this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
This function turns on or off each time you press
recommended to disconnect the connection
AUTO POWER.
before turning off the unit.
yy If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
yy When you turn this unit on for the first time,
the status of the Auto Power function is
turned on.
yy To use this function, the main unit must be
registered in paired devices list of Bluetooth
devices.
yy You can set the AUTO POWER function only
when this unit is turned on.
26 Operating
Operating
2. Operate the Bluetooth device and perform the
yy Available Devices : Smart phone, MP3, Notebook, pairing operation. When searching for this unit
etc. with the Bluetooth device, a list of the devices
yy Version : 4.0 found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
yy Codec : SBC
unit appears as “LG SJ5 (XX)”.
yy Additional data charges may occur if installed 2. In the search bar, type in “Music Flow Bluetooth”
over 3G/4G, according to your device plan. and then tap search.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
About “Music Flow Bluetooth” App 4. Tap an icon for installation.
“Music Flow Bluetooth” app brings a suite of new 5. Tap an icon for downloading.
features to this unit.
To enjoy more features, it is recommended that you
,,Note
yy Make sure that your Bluetooth device is
download and install the free “Music Flow Bluetooth” connected to the Internet.
3
app.
Operating
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
Install “Music Flow Bluetooth” (Google Play Store)”.
App onto Your BLUETOOTH
Device Activate BLUETOOTH with
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
“Music Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Install “Music Flow Bluetooth” App Bluetooth device to this unit.
through QR code 1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
1. Install “Music Flow Bluetooth” app through QR go to the main menu.
code. Use the scanning software to scan the QR
code. 2. If you want to get more information to operate,
tap [Setting] and tap [Help] menu.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
30 Operating
,,Note
yy “Music Flow Bluetooth” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
yy If you use “Music Flow Bluetooth ” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
3 yy If you operate other applications or change
the settings on your Bluetooth device while
Operating
Operating
Reinforces the treble, bass and TRE (Treble) / BAS (Bass) : -5 dB to 5 dB
BASS BLAST
surround sound effect.
1. Press button repeatedly to select TRE
STANDARD You can enjoy optimized sound.
(Treble), BAS (Bass) or WF (Subwoofer).
You can enjoy more immersive 2. Press VOL o/p to adjust the sound level.
CINEMA
and cinematic surround sound.
Troubleshooting
General
PROBLEM CAUSE & CORRECTION
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
The unit does not yy Disconnect the power cord of this unit and the connected external device (TV,
work properly. Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
Check the details below and adjust the unit according to them.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on
TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
When you feel the yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
output sound of the setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
unit is low. [BITSTREAM].
yy Change Audio DRC setting on connected device setup menu to [OFF] state.
yy Make sure Night Mode is not On. Turn [OFF] Night Mode.
Troubleshooting
PROBLEM CAUSE & CORRECTION
yy Wireless may not operate normally in weak signal area.
This device may have yy Please install the device close enough to wireless subwoofer.
wireless interference.
yy Do not install the device on metal furniture for optimum performance.
yy When any part of your body makes contact with the transceiver of the Bluetooth
device or sound bar.
yy When there is an obstacle or wall or the device is installed in a secluded spot.
Bluetooth device may yy When there is a device (a wireless LAN, medical equipment or a microwave) using
malfunction or make the same frequency, make the distance between the products as far as possible
noise in the following away from each other.
cases. yy When connecting the device to a Bluetooth device, make the distance between
the products as close as possible.
yy When the device gets too far from the Bluetooth device, the connection is
yy disconnected and the unit may malfunction.
34 Appendix
Specifications
General
Power consumption Refer to the main label.
yy Model : DA-38A25
AC adapter yy Manufacturer : Asian Power Devices Inc.
yy Input : 100 - 240 V ~ 50 - 60 Hz 1.2 A
yy Output : 25 V 0 1.52 A
Dimensions (W x H x D) Approx. 950 mm x 55 mm x 85 mm With foot
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 90 %
Bus Power Supply 5 V 0 500 mA
Available Digital Audio In Sampling
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Frequency
Available Digital Audio In format Dolby Audio, DTS Digital Surround, PCM
Input/Output
OPTICAL IN (Digital audio in) 3 V (p-p), Optical jack x 1
PORTABLE IN (Portable in) 0.5 Vrms (3.5 mm stereo jack) x 1
HDMI IN 19 Pin (Type A, HDMI™ connector) x 1
HDMI OUT 19 Pin (Type A, HDMI™ connector) x 1
5
Amplifier (RMS Output)
Appendix
Total 320 W RMS
Front 60 W RMS x 2 (4 Ω at 1 kHz, THD 10%)
Subwoofer 200 W RMS (3 Ω at 80 Hz, THD 10%)
36 Appendix
Wireless subwoofer
Power requirements Refer to the main label on the wireless subwoofer.
Power consumption Refer to the main label on the wireless subwoofer.
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 200 W RMS
Max. Input Power 400 W RMS
Dimensions (W x H x D) Approx. 171 mm x 320 mm x 252 mm
5
Appendix
Appendix 37
Maintenance
Appendix