Professional Documents
Culture Documents
History
History
---------------------------------------------------------
2019-08-12
[Fixed Bugs]
- [PSD File] Cannot open a PSD file including folder structures deeper than 5
levels.
(There is a possibility that this fix does not work because this problem was
fixed under an unknown PSD specification.)
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-08-07
[Fixed Bugs]
- [Symmetric Ruler] Access violations occur when uses Smudge tool with a brush
texture.
- [Perspective Ruler] The detection button of the red vanishing point is disabled
for 1VP and 2VP perspective ruler.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-07-29
[Fixed Bugs]
- [Scratch Pad] The program does not start with an error if the saved file of
scratch-pad is not existing.
- [Linework Layer] Often create incorrect srokes. (An stroke error will occur when
opened *.sai2 file that included these strokes).
- [Symmetric Ruler] Cannot draw correctly if the ellipse ruler is turning on.
- [Marquee Tool / Lasso Tool] The intersection operation(Alt + Shift) does not work
correctly.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-07-28
* Caution! : Recovery data created by this version is not compatible with older
versions.
[New Features]
- Symmetric Ruler
+ This ruler can be created from the menu of perspective ruler on the layer
panel.
+ Supported line symmmetry and point symmetry drawing. The maximum number of
division is 20.
[Fixed Bugs]
- [Scattering Tool] An eraser mark is not added to the mouse cursor even if the
current color is transparent.
- [Binary Pen] The size of brush circle react to the pen pressure even if
[Algorithm] is [Simple].
- [Eraser Tool(for Linework)] The program sometimes freezes when erase some
particular stroke.
- [Linework Layer] The rendering result of a layer paper is different from older
version.
- [Shape Layers] The hitting range of a control point is large than Ver.1.
- [Options Dialog] The program fails to start if specified an invalid path for the
path of recovery data.
[Changes]
- [Layer] Show Alone mode is changed to chase a current layer among only sibling
layers.
- [Brush Tools] Tuned the quality of small blotmap brush(0~6px).
- [Brush Tools] Added again [Angle] and [Angle Jitter] to the scattering form of
the regular brushes.
- [Scattering Tools] Changed to apply the gaussian method to the shape size.
(Render near shapes large and render far shapes small)
- [Eraser Tool(for Linework)] Added the option of multiple linework layer erasing.
- [Marquee Tool / Lasso Tool] Added the mode to intersect a selection (Alt + Shift)
- [Perspective Grid] Changed to preserve the settings of grid snap and vanishing
point detection into the each ruler.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-05-21
[Fixed Bugs]
- [Scattering Tool] Shapes that the ordinal is greater than the number of brush
forms of other tools do not work.
[Changes]
- [Pen Tablet Control] Changed to get not the button mapping of pen other if the
mode is Ver.1 compatible.
(To avoid a bug of Wacom driver that WinTab errors occur when activated the
program window)
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-05-19
[Fixed Bugs]
- [Brush Tools] The names of scaling quality of scattering from is not [HQ Down
Sampling].
- [Scattering Tool] The selection of [Angle Control] dropdown list is not correct.
- [GUI Control] Access violations occur when shape layers was deleted by Undo of
Redo.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-05-18
* Caution! : Recovery data created by this version is not compatible with older
versions.
[New Features]
- Effect Pen
This brush tool blends a stroke like layer blending. Supports layer blending
modes as paint modes.
- Scattering Tool
This brush tool is dedicated to scattering. Supports layer blending modes as
paint modes.
The scattering function of brush form was simplified because the scattering tool
added.
[Fixed Bugs]
- [Recover Work] An empty selection is created if redo data does not include
selection operations.
- [Layer Select & Move] Disabling of layer mask is not applied to Layer Select &
Move.
- [Rulers, Transform] The guide is not moved in integer coordinates when moved the
whole of guide.
- [Window Control] Unable to operate scroll bars and dropdown lists, by touch
operation.
[Changes]
- [Brush Tools] Improved the precision of drawing lines that the logical line width
is less than 1px.
- [Options Dialog] Changed to apply [Minimum Pressure] to all pen tablet control
modes.
- [Pen Tablet Control] Changed to not handle WM_POINTER messages of pen in WinTab
API mode.
(WinTab events conflict with WM_POINTER messages by a bug of Wacom driver)
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2019-01-29
[Fixed Bugs]
- [PSD File] The Unicode alpha channel name is not terminated by a null character.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-12-23
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-12-17
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-12-16
[Fixed Bugs]
- [Canvas] Access violations occur when closed canvas if many layers existed and
floaters or layer masks existed.
- [Recover Work] Access violations occur if opened a SAI2 file that included a
floater of layer mask.
- [Brush Preview] The preview is not updated through the change of brush size with
Ctrl + Alt + drag.
- [Brush Tools] The blending of the current color is wrong when the pen pressure is
weakened.
- [Brush Tools] The usage of the pen pressure is wrong when the current color is
transparent.
[Changes]
- [File Viewer] Changed the rule for the initial path when opened File Viewer.
Old rules:
+ Shared a path between [Open], [Save] and [Export].
+ For [Open] and [Save], If the current canvas has a saving path, open the
saving path.
For [Open] and [Save], If the current canvas has not a saving path, open the
last path.
For [Export], always open the last path.
New rules:
+ Shared a path between [Open][Save], but [Export] has a path independently.
+ For [Open], [Save] and [Export], If the current canvas has a saving path, open
the saving path.
For [Open], [Save] and [Export], If the current canvas has not a saving path,
open the last path.
+ Added settings about the initial path. ([Help] -> [Options] -> [Preference])
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-10-28
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-10-27
[Fixed Bugs]
- [Water Color] Strange color appears when [Dilution] is 0 and painted with lower
pressure.
- [Pressure Tool] Cannot change the pressure correctly when added a pressure
control point and drag it immediately.
- [Brush Tool Panel] The layout in separated tool panel is not changed immediately
when changed the brush form.
- [Window Control] The vertical size of a window is not maximized when double-
clicked the top or bottom edge of the window.
[Changes]
- [Brush Tool Panel] Added a setting into [Window] Menu to display size list items
in only numerals.
- [Brush Tool Panel] Added a setting into [Window] Menu to display size list on
upper side.
- [Scratch Pad] Changed to be able to pick a color when selected a tool other than
brush tools.
- [Straight Ruler] Changed to be able to rotate the ruler with 'Ctrl + Drag'
outside ruler body.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-09-20
[Fixed Bugs]
- [System File Dialog] An access violation occurs when open System File Dialog.
- [Layer List] Program freezes when dragged layer items to outside of the layer
list.
- [Scattering] [Size Jitter] is applied to the upscaling side too. (It should be
applied to only the downscaling side)
- [Brush UI Panel] The layout of the tool panel is not changed immediately when
opened or closed a pane.
- [Brush Tools ] The center of size circle slipped out when resizing brush size
relatively by Ctrl+Alt+drag.
[Changes]
- [Brush Preview] A new background color added. (The background color is changed
with a click)
- [Scattering] Added some parameters for the scattering in the brush forms.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-09-17
[New Features]
- Brush preview
(The preview is able to show/hide with [Show User Interface Panel] in [Window]
menu)
[Fixed Bugs]
- [Gradation Tool] An access violation occurs when some rulers are enabled.
- [Linework Layer] Bezier handles are selected by [Select Strokes with Selection].
- [View] The brush size circle disappears when changed a view by shortcut key.
[Changes]
- [Brush Tools] Adjusted the feeling of brush density when [Ver1 Prs Spec] is
enabled.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-06-14b
[Fixed Bugs]
- [Brush Tools] The program sometimes freezes when using brush tools.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-05-26
[Fixed Bugs]
- [Resize Canvas] Internal data are corrupted when other canvas was closed after
expansion of canvas size.
- [Selection] Old selections are not deselected when do [Select All].
- [View] The layouts of embedded views are corrupted after activated a floating
view and next closed an embedded view.
[Changes]
- [Options Dialog] Added a checkbox [Do not hide separated panels when turned off
[Show All User Interface Panels]].
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-05-07
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-05-06
[Fixed Bugs]
- [Memory Management] Sometimes the usage of one CPU increases to around 100% after
painting, layer moving and etc..
- [Layer Mask] A few errors occur when cut away a floater with selection and move
it.
[Changes]
- [Dropdown List] Changed the detection method of cancel to not use mouse capture.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-05-02
[Fixed Bugs]
- [View] On Windows 10, the first click by mouse(includes WinTab) is ignored after
a window is activated.
- [Magic Wand and Bucket Tool] A selection or a painting leaks onto border lines
when [Selection Mode] is [Similar Colored Area].
[Changes]
- [PSD File] Changed to accept layer folders that have image data.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-04-30
[Fixed Bugs]
- [Configure Canvas Size Presets] The scrollbar for size presets is not displayed.
- [View] The context menu function on the view bar is always applied to the active
view.
- [Syringe] Cannot pick a correct color in a merged image when the canvas
background color is transparent.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-04-29
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2018-04-28
[Fixed Bugs]
- [Canvas Save] If the filename included ":", the canvas is saved as "Alternate
Data Stream" of NTFS.
- [Change Canvas Resolution] The printing metrics is not calculated when [Fix
Horizontal and Vertical Pixels] is checked.
- [Text Layer] The keyboard focus is lost when changed a current layer from a text
layer by undo, redo, Ctrl+Shift+LayerClick or etc..
- [Ruler Layers] All rulers are displayed when undo or redo [Change Canvas Size].
- [Layer Mask] The thumbnail of layer mask is not updated when changed the parent
of a layer mask.
- [Bucket Tool] [Ignore Existing Selection] always work even if unchecked it.
- [Layer Select & Move] Parts that hid by layer masks are selectable.
[Changes]
- [Pen Tool] Added a setting to adjust the removal range of hooks at the both ends
of a stroke.
- [Magic Wand and Bucket Tool] Modified the algorithm for [Transparent Area].
- [Pen Tablet Control] Improved the operation feelings of the pen input, for
Windows 8 or later.
(Changed to ignore the Microsoft WinTab driver. For a while, changed to ignore
the gesture on view windows.)
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-12-27
[Fixed Bugs]
- [Shape Layers] Pressure CPs and bezier handles are displayed in the view scale.
- [Copy Layer] Both of the origin layer and the copied layer are selected after the
copy.
- [Fringe/Layer Paper] Sometimes access violations occur when [Layer Effect Color]
is [Ver.1 Like].
- [Recovery Work] An access violation occurs when the selection is invisible at the
recovery point.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-12-21
[Fixed Bugs]
- [Selection] Becomes unable to use SelPen and SelErs by the caution for an
invisible layer when deselected hidden selection.
- [Tool Shift] Sometimes a key is ignored when pressed the key and a tool shift key
at the same timing.
- [Copy Layer] When copied a layer folder that has an independent moving group, the
copied group is merged to the original group.
- [PSD File] An access violation occurs when saved a canvas that included small
transparent shapes.
[Changes]
- [Select All] For a shape type layer, changed to select all CPs. For a text layer,
changed to select all text.
- [Magic Wand and Bucket Tool] Added a checkbox to ignore the existing selection(or
painted parts) from the searching of a region.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-12-01
[Fixed Bugs]
- [Recovery Work] Layer information are not appeared correctly to the layer list in
some cases.
- [Layer] Access violations occur when opened a *.sai file that included layers
that the length of layer name is zero.
- [Tools] The stroke stabilizer of level 10 is always applied to tools other than
brush tools.
- [Brush Tools] Water fringes are not updated when the brush size is smaller than
64.
[Changes]
- [Brush Tools] Changed to display an additional brush circle of maximum size when
not stroking.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-11-28
[Fixed Bugs]
- [Layer Folder] Cannot cut, move and transform child invisible layers with
selection region.
- [Layer Folder] [Lock] for pixel opacity does not apply to child layers.
[Changes]
- [Layer Processing] Modified the rule for invisible layers processing and modified
associated settings in [Options] dialog.
(Those modification are applied to Cut, Move, Transformation, Rasterization and
Color Adjustment)
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-11-27
[Fixed Bugs]
- [Layer Merge] An access violation occurs when merges a layer folder and child
layers.
- [Layer Merge] The result becomes rasterized when a shape type layer of a parent
of a clipping group merged to a shape type layer.
- [Concentric Ellipse Ruler] The guide disappears when rotate or flip the ruler.
- [Concentric Ellipse Ruler] Straight lines appear when made a stroke as crossed
the ruler.
- [Perspective Grid] The guide does not rotate when rotated the ruler if the snap
mode is [None].
[Changes]
- [Layer Folder] Enabled again painting operations for child layers when a layer
folder is selected.
- [Settings File] Improved the recovery logic when the settings file was corrupted.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-11-24
[New Features]
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-11-23c
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-11-23
[Fixed Bugs]
[New Features]
- Smudge Tool
(Please create Smudge Tool manually by the context menu on an empty slot of the
custom tool tray)
[Fixed Bugs]
- [Ruler Layer] The UI of ruler on the quick bar is not controlling correctly if
the layer panel is separated.
- [Transform] Rotation for 90deg. does not work correctly in the transformation
mode.
- [Gaussian Blur] Access violations occur when changed [Preview] checkbox quickly.
- [PSD File] A corrupted PSD file is created if a layer has a name longer than 255
in multibyte encoding.
[Changes]
- [GUI Control] Changed the logic of blocking operations for file I/O or
transformation etc.
- [Brush Tools] Discontinued pressure checkboxes and added pressure buttons on the
left side of each slider that associated.
- [Brush Tools] Added [Anti-Ripple] checkbox that suppress ripple like artifacts on
the brush stroke of a flattest large brush.
(This feature was always enabled on the previous preview version or before)
- [Brush Tools] Improved the speed of flattest large brushes more than 15%.
- [Marker Tool] Changed the density of single click painting to same as Ver.1 if
[Amplify Dens.] is 100.
- [Lasso Tool] Changed to apply the stabilizer when [Selection Mode] is [Freeform].
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-08-20
[Fixed Bugs]
- [Ver.1 Style WinTab Control] The mouse cursor is put at a different point from
the drawing point, on multi-monitor environment.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-08-16
[Fixed Bugs]
- [View/Scratch pad] View and the scratch pad malfunction with particular
operations
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-08-15b
[Fixed Bugs]
- [Initialize] Cannot start program if a file of scratch pad data is not existing.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-08-15
[New Features]
- Scratch pad
[Fixed Bugs]
- [View] Unable to change the order of floating views by the view bar.
- [Shape Layers] Access violations occur in a rare condition about the internal
memory layout.
- [Layer Mask] A thumbnail in layer list breaks when the width or the height of
canvas is larger than 11585px.
- [Multicore Operation] Big delays occur when the number of logical cores is larger
than 32.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-07-29
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-07-28
[Fixed Bugs]
- [Magic Wand and Bucket Tool] Does not work correctly when applied to a layer mask
with [Merged Image] mode of [Selection Source].
[Changes]
- [Brush Tools] Improved sharpness of the start and the end of pressured brush
stroke again.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-07-27
[New Features]
[Fixed Bugs]
- [History] Closed layer folders are opened when undo or redo operation.
- [History] Does not close some history files when open, edit and close a canvas
quickly.
- [Change Canvas Resolution] Change only of "Printing Resolution" does not work.
- [Separated Panels] Tool parameters are not updated with tool-shift operation.
- [Panels] When separated navigator panel and layers panel, those layouts break if
user interface was scaled up.
- [Tools] Tool selection of tail switch of stylus does not work except for normal
layer.
- [Tools] Tool selection of tail switch is not independent for SelPen and SelErs.
(Different from Ver.1)
- [Eraser Tool(for Linework)] Program sometimes freezes when erase straight line
with [Extend To: Intersections] option.
[Changes]
- [Brush Tools] Changed the default value of [Amplify Dens.] to 50 from 0. (Exclude
Water Color and Marker)
- [Brush Tools] Improved sharpness of the start and the end of pressured brush
stroke.
- [Brush Tools] Changed the feeling of pressure sensitivity 101 to 200 of density.
- [Brush Tools] Added the option to enable similar feeling to Ver.1 stabilizer.
(Options -> Tool)
- [Canvas Save] Changed the file save logic again to avoid confriction about some
file synchronization program.
- [PSD File] Changed to detect blend modes of Luminosity and Shade in PSD file that
created by Ver.1.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-06-07b
[Fixed Bugs]
- [Layer Move] An access violation occurs when moved a layer folder that specified
a layer paper.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-06-07
[Fixed Bugs]
- [Floating View] Strokes begin with 100% pressure after operation of other windows
on SAI.
- [History] The error handling is incorrect for creation of history data file.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-06-01
[Fixed Bugs]
- [Magic Wand and Bucket Tool] Program freezes occasionally when [Anti-Aliasing] is
enabled.
- [Resizing of Canvas] View is not updated when the resized canvas is placed
outside view.
[Changes]
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-05-31
[New Features]
- Recovery function for works from crash etc.. ([File] menu -> [Recover Work])
[Fixed Bugs]
- [Recent Files] SAI ends immediately with corpulence of the recent files data.
- [View] Sometimes SAI runs out of control with an access violation after resizing
of canvas.
- [View] Sometimes painting results are not applied to views other than the current
view.
- [Pen Tablet Control] Sometimes mouse operation is not enabled after leaving of a
pen from a tablet surface.
- [Layer Mask] The result of applying of a layer mask get corruptions partly.
- [Shape Layers] Invisible control points remained even if all control points are
deleted.
- [Shape Layers] "Select Strokes with Selection" includes paths selected and
deselected before.
- [Layer List] Sometimes cannot select a current layer in a folder with shortcut
key.
- [Clipboard] The blend order is reversed when multiple layer images are pasted to
an other program.
- [Tool Shift] Does not detect keyup until end of drag even if upped a key
immediately after the start of drag.
- [Shape Tool] The guide rectangle is reversed horizontally when reached to the
maximum size.
- [User Interface] The content of listboxes are corrupted when changed the screen
resolution.
[Changes]
- [History] The undo/redo count changed to variable count between 100 to 200(or
more) from fixed count of 100.
(Only when the recovery function is enabled. Otherwise the undo/redo count is
100.)
- [Canvas Save] Changed the file save logic to avoid confriction about some file
synchronization program.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2017-01-19
[Fixed Bugs]
- [SAI2 file] Some internal data corrupts when saved a canvas that includes wide
regions of dither pattern.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-12-24
[Fixed Bugs]
- [Shape Layers] When deform stroke with grabbing a curve segment, the previous CP
of the curve segment is grabbing too.
- [Transform] When the resampling mode is [Lanczos 3], an error occurs when scaling
down to very small.
- [Text Layer] Text color is not changed when select a color from Swatch.
- [Text Layer] When text has selection, the text color is changed even if the
current tool is not Text tool.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-12-12b
[Fixed Bugs]
- [Shortcut Keys] The version that you run first is "Preview.2016.12.12", An access
violations occurs when open "Shortcut Keys" Dialog.
(The shortcut key of tools will be broken if this error occured. If you obtained
this error, please delete "settings2.ssd" in
"<My Documents>\SYSTEMAX Software Development\SAI2 Demo" folder)
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-12-12
[Fixed Bugs]
- [Paint Engine] Access violations occur when paint something speedy on a big
canvas.
- [Floater] Image data is sometimes destroyed when used brush immediately after
transformation of cut image.
- [Floater] Selection is created from only the last layer when floater is created
from multiple layers.
- [Layer] The preview of "Outline" does not work when floater is existing.
- [Wand Tool and Bucket Tool] Does not work for layer mask.
- [Wand Tool and Bucket Tool] Does not work on translucent region when the
selection mode is "Transparent Area".
- [Adjustment Filter] Does not work correctly when pixels opacity of the target
layer is protected.
- [JPEG Format] An access violation occurs when "JPEG Quality" dialog is opened.
- [JPEG Format] The colors of a gray scale JPEG file are converted to magenta in
error.
[Changes]
- [Wand Tool and Bucket Tool] Changed to be able to use when the target layer is
invisible.
- [Selection] Changed to not change the visibility of the selection when the
selection is invisible when Undo/Redo selecting.
- [Brush Tools] Adjusted the pressure sensitivity for brush density when "Amplify
Dens." is 100.
- [Eraser Tool, SelPen Tool, SelErs Tool] Changed the default settings to ignore
the pressure sensitivity. (Same as Ver.1)
- [Marker Tool] Changed the default settings; "Amplify Dens."=100, "Ver1 Prs
Spec."=On.
And some other small changes and some small bug fixes...
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-11-19
[Fixed Bugs]
- [Viewbar] Program freezes when dragged a viewbar item and dropped to itself.
- [Layer] Clipping group in a layer folder become disabled temporarily when show a
layer folder alone.
- [Layer] Access violation occurs when try to create a perspective ruler or a
perspective grid.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-11-17
[New Features]
[Fixed Bugs]
- [View] The angle and the horizontal direction are not applied correctly for the
center mark of the ellipse ruler and for pressure CPs.
- [Layer List] Cannot move a layer list item to the bottom of layer list.
- [Layer] Change of layer visibility is not appeared on navigator and other sibling
views immediately.
- [Layer] Clipping group become not disabled temporarily when show a layer alone.
- [Layer] Bucket tool and Gradation tool are not blocked for a layer in a locked
folder.
- [Bucket Tool] Striped garbage appears when transparent color is selected and
green and blue of the current color are 0.
- [Pressure Tool] The pressure rate popup is not hidden when added pressure CP.
- [Gaussian Blur] Access violation occurs when layer image is spread outside
canvas.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-11-12
[Fixed Bugs]
- [Linework Layer] The freezing bug fixed on 2016-11-11 version is not fixed
completely.
- [System File Dialog] Cannot open multiple files.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-11-11
[New Features]
[Fixed Bugs]
- [View] Access violation occurs when rotated a view between 180 to 360 degrees in
the following conditions;
The vertical resolution of the screen is aligned to 32px, In the full screen
mode, The user interface panels are hidden,
The scroll bars of view are hidden
- [Linework Layer] Internal order of pressure CPs breaks when moved multiple
pressure CPs.
- [Linework Layer] Program freezes for a while when erased a stroke that the above
bug occurred.
- [Straight Ruler] "Lock Pivot" in the context menu does not work.
- [Brush Tools] Guide line from the end of the last stroke appears in the straight
line draw mode when pressed Shift key.
- [Magic Wand and Bucket Tool] Access violation occurs when the selection source
folder is invisible.
[Changes]
- [Layer] "Transfer Painting into Next Layer" changed to obtain same result as
Ver.1.
- [Brush Tool] Changed to display the guide circle and the brush size on a view.
- [Syringe] Changed the internal background color to white when the background
color of canvas is transparent.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-11-02
[Fixed Bugs]
- [Layer] Program runs out of control when copied a layer folder that includes the
current layer.
- [File Viewer] Image metrics information for *.sai files are not created.
[Changes]
- [File Viewer] Changed to display the image metrics of a pointed file item.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-11-01
[Fixed Bugs]
- [Canvas] A light grayed border appears on the edge of a canvas when created
selection.
- [Layer] An ordinal of layer name is interpreted as an octal number when added '0'
before ordinal. Leading '0' is removed.
- [File Viewer] Cannot open a folder by double click in the files list on the save
mode.
[Changes]
- [Layer] Changed to insert the copied layers before the current layer.
- [Layer] Changed to keep the appearance(that related to opacity and effect) of the
result when merged two normal layers simply.
- [Selection] Changed to keep the invisibility of selection after
moved/reversed/rotated the selection.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-10-30
[New Features]
- File Viewer
[Fixed Bugs]
- [Change Canvas Size] 'Extension for Each Side' does not work if the width and
hight was not changed.
- [Floater] Program runs out of control when decided the transformation on outer of
canvas.
- [Layer] Program is frozen when apply "Select CPs in Selection" or "Select Strokes
with Selection" to a layer folder.
- [Layer] Some near layers are embroiled to the deletion in merging of a clipping
group.
- [Layer] The visibility and the opened status is not inherited to the copied
layers and folders.
- [Layer] A merged layer is inserted as wrong level if the layer is the bottom item
of a folder.
- [Layer] A rasterized layer is inserted as wrong level if the layer is the bottom
item of a folder.
- [Layer] The order of layers become reverse when paste the layers into a layer
folder.
- [Layer] Reverse Horizontal for view does not apply to the nudge operations.
- [Layer] Perspective ruler/grid become un-deletable when create the rulers on the
parent layer of clipping group.
- [Layer] Show Alone mode does not work for the layers deeper than two levels from
the target layer.
- [Layer] The closed folders do not opened when selected a layer in those folders
by Select & Move operation.
- [SAI/PSD Format] The ordinal of the layer is reset when open a file.
- [Tool Shift] Tool shift takes malfunction when pressed Caps key.
- [Text Tool] Nudge does not work if the text frame has key input focus.
[Changes]
- [Layer List] Changed the eye icon color for the ancestors and the offspring of a
layer that showed alone.
- [Layer List] Changed to treat transparent color as black. (Canceled the change
that applied in 2016-07-30 Version)
- [View] The setting about the scroll range of view added. (Option dialog)
- [Straight Line Mode/Gradation Tool] The snap angles for 45 degrees added.
- [Brush Tools] The operation to draw straight line added. (Shift + Click);
- [Water Color Tool] Changed the default settings to similar feeling to Ver.1
(Amplify Dens. = 0 -> 50, Ver1 Prs. Spec. = OFF -> ON)
- [Pen Tool] Changed to restrict the hook of start of stroke and end of a stroke.
- [Curve/Line Tool] Changed to back to the plot mode when undo the finish of the
plot.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-07-30
[New Features]
[Fixed Bugs]
- [Layer Mask] Apply button and Link button on layer list item do not work.
- [Canvas] The position of un-linked Layer mask is not moved when the canvas size
was changed.
- [Selection] Some square halls appears when dilate or erode the selection.
- [Transform] When transformed layers with selection, the floaters do not come to
be able to operate if the bottom floater is empty.
- [Text Tool] Access violation occurs when changed the scaling of user interface.
- [Bucket Tool] Tile form artifacts appear when filling a region with a transparent
color.
- [Color Adjustment] Preview checkbox does not affect layers other than the top
layer in the multi selected layers.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-07-27
[New Features]
- Cut, Copy and Paste operation for linework layer and shape layer.
[Fixed Bugs]
- [Navigator] The scale track bar and the angle track bar does not work correctly.
- [Layer] Access violation occurs when operate an empty layer folder on the bottom
of the layer list.
- [Layer Mask] Paint color has inconsistency if the layer mask is the invert mode.
- [Layer Merge] Access violation occurs when a clipping group includes an invisible
layer.
- [Layer Merge] When merge a clipping group, invisible layers stay after merging.
- [Linework Layer] Sometimes internal selection status of paths are kept after
deselection.
- [Gaussian Blur] Does not apply blur correctly when pixel opacity is preserved.
- [Lasso Tool] Polygonal subtraction does not work if Alt key is not pressed when
finishing plot.
- [Bucket Tool] The regions that have same color as paint color are not excluded
from fill.
[Changes]
- [Brush Tool] Changed the blending operation for size circle to same operation on
Ver.1.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-06-24
[New Features]
[Fixed Bugs]
- [Color Mixer] Cannot register color after picked up color from Color Mixer.
- [Navigator] The scale track bar and the angle track bar does not work correctly.
- [Canvas] Layer thumbnail breaks if the canvas size is larger than 256M pixels.
- [Canvas] Reverse Canvas and Rotate Canvas does not process layer mask.
- [Layer] Cannot transfer layer between canvases by drag and drop operation.
- [Layer] Apply Layer Mask button is enabled for a layer other than normal layer.
- [Brush Tools] The sliders do not accept operation on the brush tool popup
window(Ctrl+Alt).
- [Brush Tools] The dot mouse cursor is not appears for Eraser, Binary Pen and Pen
tools.
[Changes]
- [Layer] Changed to be able to cut, copy and move images in a folder with
selection when a layer folder is selected.
- [Layer] Select and Move Layer feature is enabled even if a selection is existing.
- [Layer] Changed to be able to select a layer by click on the thumbnail space.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-06-20
[Fixed Bugs]
- [Recent Files] SAI stops by error when the recent files list is empty.
- [JPEG Format] Error popups appears on the bottom-right of window when try to load
CMYK colored JPEG file.
[Changes]
- [SAI Format] Changed to display a notification when try to load *.sai file that
created by SAI of the beta test age.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-06-19
[New Features]
[Fixed Bugs]
- [Brush Tools] Rotation and Reverse of view are not applied to the direction of
stylus.
- [Water Color] Blur effect does not work correctly when the brush size is smaller
than 15.
- [Marker] Marker does not work correctly when the density is not 100.
- [Layer Move] Rotation and Reverse of view are not applied to Layer Nudge.
- [Perspective Ruler] Creation shortcut key does not work for Perspective Ruler and
Perspective Grid.
- [Selection] Garbage appears around the bounding box of selection with dilation
and erosion.
- [Trim Canvas by Selection] Pixels outside canvas are not cut down.
[Changes]
- [Custom Tool Tray] Changed the behavior of item drag operations to same as Ver.1.
- [WinTab Control] Changed to ignore error about inquiry for the version
information.
- [Layer Merge] Changed to insert a merged layer to the location that the current
layer was gone.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-03-19
[Fixed Bugs]
[Changes]
- [Tablet Input] Changed to never load WinTab API DLL when using TabletPC API.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-03-17
[New Features]
- Binary Pen
[Fixed Bugs]
- [Layer] Grayed status of layer attribute controls for an invisible layer are
removed when selected an invisible layer.
- [Layer Mask] Creation of Selection with layer mask image does not work correctly.
[Changes]
- [Panels] Changed to always show a scroll bar for the color and tool pane.
- [Change Canvas Resolution] Changed to include the width of fringe and the scale
of layer paper.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-01-24
[Fixed Bugs]
- [Change Canvas Resolution] The canvas size turns out as 0px x 0px when changed
the printing resolution if the size unit is %.
- [Layer] SAI freezes when the scrollbar of color and tool panels switched
visibility by layer change on edit.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-01-23
[Fixed Bugs]
- [SAI2 File] Loading of .sai2 file fails if the .sai file includes perspective
ruler or perspective grid.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-01-22
[New Features]
- Recent files
- Close canvas
[Fixed Bugs]
- [Tool] The names is switched between Lasso tool and Magic Wand tool.
- [Layer] A layer item does not scrooll-in on the layer list by Select & Move
operation.
- [Layer] Access violation occurs when transfer a linework layer or a shape layer.
- [PSD File] Access violation occurs on "Change Canvas Size" dialog and "Change
Canvas Size" dialog with misusing for size unit in PSD file.
- [Shorcut Key] The change for shortcut key not apply to the main menu while SAI is
running.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2016-01-19
[New Features]
- [Canvas] Reverse Horizontal, Reverse Vertical, Rotate 90deg. CCW and Rotate
90deg. CW
- [Layer] Transform
- [Layer] Reverse horizontal, Reverse vertical, Rotate 90deg. CCW and Rotate 90deg.
CW
[Fixed Bugs]
- [Mouse] Mouse wheel does not work correctly with some devices.
- [Window] High DPI monitor breaks the layout of the current colors.
- [View] Child view sometimes stops the window painting when switch to floating
view.
- [Layer] "Select & Move Layer" includes invisible layer and hidden part.
- [Brush tools] Access violation occurs when read a bristle data includes elements
more than 64.
- ["Brush" and "Water Color"] The color blending involves irrelevant colors outside
brush pattern.
- [Erosion, Dilation for Selection] Erosion and dilation freezes when a layer mask
is selecting.
[Changes]
- [Canvas] The canvas background color settings moved to menu from layer tray.
- [View] Restrict the break out of canvas from view when repeat zoom in and zoom
out.
- [Brush Tools] "Ignore ruler mode" and "Straight line mode" buttons added into the
quick bar.
The effect keyed operation for these functions are abolished.
- [Brush Tools] The settings for direction and randomize for bristle added.
- [Brush Tools] The settings for scratch for brush texture added.
- [Brush Tools] The settings for amplification for brush density added
- [Canvas] The file extension for temporary file on saving process is changed.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-10-19
[New Features]
- Lasso
[Fixed Bugs]
- "Merge Layer" obtains malfunction with layer that moved to outside canvas.
- "SelPen" and "SelErs" obtains malfunction on the right edges and the bottom edges
of canvas.
- Selection region sometimes does not appear correctly when the selection display
mode was changed.
- Enter key and Esc key do not work for Curve and Line tool after the using of
Shortcut Keys dialog.
- The following layer operations do not work correctly on a canvas that loaded from
*.sai2 file.
- Open and Close for layer folder
- Multi layers selection
- Change for layer protections
- The context menu for shape layer tools does not include functions to create shape
layer tools.
- Undo and Redo for text layer do not work if the history data was purged into
storage device.
[Changes]
- It came to handle the opacity of the following blend modes as "Fill" on PSD file.
- Shade
- Shine
- Shade/Shine
- Burn
- Dodge
- Burn/Dodge
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-07-18
[Fixed Bugs]
- "Save" for any format obtain an internal error if the pixel width of the canvas
is an odd number and the background color is transparent.
- "Save" for .sai2 format obtain an internal error if the canvas has layer folder.
- "Save" for .bmp format output incorrect information for the existing of the
transparency.
- Undo and Redo obtain malfunction after painted layer was moved to outside canvas.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-07-10
[New Features]
- Nudge for layer (Ctrl + Arrow Keys(Cut and move), Alt + Arrow Keys(Only
selection), Shift key increases the stride)
[Fixed Bugs]
- The brush settings popup of Ctrl + Alt is always displaying on the view created
first.
- Combination of layer moves do not update the modifying state from the second
moving.
[Changes]
- Sped up "Open" and "Save" for *.sai2 format with the malti-core programming.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-25
[Fixed Bugs]
- Create PSD file that is not able to read by Photoshop if an empty layer is placed
under a painted layer.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-24
[Fixed Bugs]
- Can not save and load layer masks correctly in PSD format.
- Quick combination of "MoveLayer -> Paint -> MoveLayer" bring some malfunctions.
- Undo and Redo for layer name does not work correctly.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-22
[Fixed Bugs]
- "Transfer Painting into Next Layer" function does not erase control points of
paths.
- Space + EffectKey + Drag does not work when control points is displayed.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-21b
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-21a
[Fixed Bugs]
- The save canvas function for PSD/PSB format obtains access violations.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-21
[Fixed Bugs]
- Curve tool and Line tool obtain an access violation from first click.
[Changes]
- Changed custom tool set of layer folder, text layer and perspective ruler to the
set of normal layer.
- Added specific mouse cursors for Eraser, Mask Pen and Mask Eraser.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-04-20
[New Features]
- Layer mask
[Fixed Bugs]
- Zoom and angle track bar of the navigator drop the display result when operated
quickly.
- Can not create canvas when the horizontal width is less than 32px.
- Some unrelated closed folders are opened when using Undo and Redo.
- The visibility settings of a 'Pass' mode layer folder does not work correctly.
- Brush form and texture settings is not saved if the name included other than
ascii characters.
- Combination of 'Overlay' mode and paper texture brings a broken blending result.
- Can not start program if the path of 'My Documents' was changed into a root
directory.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-01-20
[Fixed Bugs]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-01-19
[New Features]
- Marker tool
(Please create Marker tool from the context menu of the custom tools tray if you
have executed a older version of SAI2.)
- Navigator
[Fixed Bugs]
- Eraser tool does not detect an intersection of horizontal stroke and vertical
stroke.
- Brush tool and Water Color tool does not blend the current color if "Dilution" is
larger or equal 1.
- The program does not draw anything of the maximized normal view if Floating View
is existing.
- The program does not switch control mode correctly to the mouse operation from
the pen tablet operation.
- Brush tool and Water Color tool include outer pixels of the canvas for blending.
- The maximum width and height of texture 'less than 1024x1024' not 'less or equal
1024x1024'.
- The program does not detect correctly the release of multiple keys.
[Changes]
- Changed order of buttons in the confirmation dialog of the canvas closing to same
as Ver.1.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-01-02
[Fixed Bugs]
- The program does not detect the correct vanishing point of the stroke for
perspective rulers.
- Access violation occurs when layers that is larger than the canvas are merged.
[Changes]
-----------------------------------------------------------------------------------
---------------------------------------------------------
2015-01-01
[Fixed Bugs]
- The program used uninitialized pressure data to blend for Brush tool and Water
Color tool.
[New Features]
- Linework layer
+ Imploved the curve algorythm.
+ Implemented the bezier curve mode.
+ Implemented erasing to intersection (Eraser tool).
etc...
- Save and Load functions for the private format(.sai2) and Bitmap(.bmp)
[Etc.]
- Many features is added into the base of the program from 2013-12-10 version.
-----------------------------------------------------------------------------------
---------------------------------------------------------
2013-12-10
-----------------------------------------------------------------------------------
---------------------------------------------------------
2011-10