Professional Documents
Culture Documents
Done by Students:
Bourega zakaria
Ikadi Hamdi
To professor: Toubal
02-Nov-2020
Purpose:
This experiment aims to obtain the transfer (ID -VGS) characteristic
of the JFET after that we will investigate the parameters of the
common-source amplifier.
I Procedure:
1. we Connect the circuit as shown in figure 2. (JFET:BF246B)
Use Cc1 = 1μF, Cc2 = 47μF, Cs=100 μF, RL =3.9kΩ,
RS=RD=2 kΩ, RG = 200 kΩ, VDD = 12V.
Apply a sinusoidal signal with frequency 1kHz,
amplitude 100 mVpeak.