Professional Documents
Culture Documents
DCS-930L BX FW2.17.03 ReleaseNote PDF
DCS-930L BX FW2.17.03 ReleaseNote PDF
Firmware: v2.17.03
Release Date: 2018-12-18
Applicable Hardware Version: B1 and B2
Mydlink Agent Version: v2.2.0-b33
ActiveX Version for Windows: v2.3.2.41
Improvement:
1. Don’t use GPL v3 open source (change open source used for e-mail function)
Bug Fixes:
1. Upgrade MatrixSSL to v3.9.3 that resolve the vulnerabilities in MatrixSSL.
2. Fixed a command injection issue in the change admin’s password configuration (/setSystemAdmin).
3. Fixed the issue where sending long password on password field of html page.
4. Fixed for WPA2 KRACK Vulnerabilities.
5. Update the ActiveX and Java Applet with renewed code-signing certificate.
6. Fixed an issue that when set motion sensitivity to 0%, the motion alarm still occurs.
7. Fixed the “wireless.htm buffer overflow” vulnerability.
Known Issue:
1. The device does not support Mozilla Firefox 52 or later.
2. The device does not support Google Chrome 42 or later.
3. The device does not support Apple Safari 12 or later.
4. The device does not support Microsoft Edge browser.
5. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
6. The Java Plug-In viewer can’t support Web Proxy Traversal.
7. High sensitivity for motion detection can easily trigger a false alarm.
8. There is no warning message display like as Windows OS when MAC OS did not install Java.
------------------------------END----------------------------------------------------------------------------------
Bug Fixes:
None
Known Issue:
1. This version had the WPA2 KRACK Security Vulnerability issue.
2. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
3. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
4. The Java and Plug-In viewer can’t support Web Proxy Traversal.
5. The flicker noise would trigger the motion detection when sensitivity is 100%.
6. There is no warning message display like as Windows OS when MAC OS did not install Java.
7. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
I. Type chrome://flags in the browser's address bar and hit enter.
II. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
III. Enable it with a click on the link.
IV. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
------------------------------END----------------------------------------------------------------------------------
Firmware: v2.15.06
Release Date: 2017-09-21
Applicable Hardware Version: B1 and B2
Mydlink Agent Version: v2.2.0-b03
Bug Fixes:
1. Add XSS protection mechanism for CGI command
2. Fixes Cross Site Request Forgery (CSRF) vulnerability for FTP setting
3. Fixes denial of service (DoS) vulnerabilities for upload firmware and restoreconfiguration
4. Remove crossdomain.xml to fix a securityvulnerabilityissue.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
V. Type chrome://flags in the browser's address bar and hit enter.
VI. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
VII. Enable it with a click on the link.
VIII. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
------------------------------END----------------------------------------------------------------------------------
Firmware: v2.14.04
Release Date: 2016-09-09
Applicable Hardware Version: B1 and B2
Mydlink Agent Version: 2.1.0-b41
ActiveX Version for Windows: 2.3.2.39
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
IX. Type chrome://flags in the browser's address bar and hit enter.
X. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
XI. Enable it with a click on the link.
XII. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
------------------------------END----------------------------------------------------------------------------------
Firmware: v2.14.03
Release Date: 2016-08-24
Applicable Hardware Version: B1 and B2
Mydlink Agent Version: v2.1.0-b37.
ActiveX Version for Windows: 2.3.2.39
Bug Fixes:
1. Fixed an issue that when Mydlink service will be offline when upgrade v2.13.15 firmware on your IP
Camera.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
Firmware: v2.13.15
Release Date: 2016-06-28
Applicable Hardware Version: B1 and B2
Mydlink Agent Version: v2.1.0-b27.
ActiveX Version for Windows: 2.3.2.39
Improvements:
1. Add authentication to CGI /config/stream_info.cgi.
2. Offer the password validation on console port. (Console’s Password is synchronized with the admin’s
password)
Bug Fixes:
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
XVII. Type chrome://flags in the browser's address bar and hit enter.
XVIII. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
XIX. Enable it with a click on the link.
XX. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
7. Due to modify the model name of UPnP properties for this release firmware, the current
D-ViewCAM version can’t search the device.
-------------------END--------------------------------------------------------------
Firmware: v2.12.01
APPLICABLE HARDWARE VERSION: B2
Date: 2015-10-01
Mydlink: v2.0.19-b54n
Bug Fixes:
1. The ActiveX and Java Applet signing certificate are updated.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
XXI. Type chrome://flags in the browser's address bar and hit enter.
XXII. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
XXIII. Enable it with a click on the link.
XXIV. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
7. Due to modify the model name of UPnP properties for this release firmware, the current
D-ViewCAM version can’t search the device.
-------------------END--------------------------------------------------------------
Firmware: v2.11.03
APPLICABLE HARDWARE VERSION: B1 and B2
Date: 2015-08-12
Mydlink: 2.0.19-b54
Bug Fixes:
1. Fixes the Internet Explorer 11 compatibility issue in Windows 10 (can’t get ActiveX install prompt).
2. Fixes the issue that if add an existing user account, the web-GUI doesn’t pop-up warning.
3. Add mechanism to prevent anti-brute force attack
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
XXV. Type chrome://flags in the browser's address bar and hit enter.
XXVI. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
XXVII. Enable it with a click on the link.
XXVIII. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
7. Due to modify the model name of UPnP properties for this release firmware, the current
D-ViewCAM version can’t search the device.
-------------------END--------------------------------------------------------------
Firmware: v2.10.04
Hardware: B1
Date: 2015-06-02
Mydlink: 2.0.19-b35
Bug Fixes:
1. Remove one Hidden webUIfor RD develop using.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
XXIX. Type chrome://flags in the browser's address bar and hit enter.
XXX. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
XXXI. Enable it with a click on the link.
XXXII. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
--------------------------------END-------------------------------------------------
Firmware: v2.10.03
Hardware: B1
Date: 2015-05-14
Mydlink: 2.0.19-b35
Enhancements:
None
Bug Fixes:
1. Fixed HTTPS issue that cause Pan/Tilt and Day/Night control not work from portal/app.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
6. You can’t view the IP Cam’s live image from Chrome 42 or later. This is because the camera is
configured to use a Java applet for viewing H.264 and Motion JPEG stream, but starting with
Chrome Version 42, Google has disabled the NPAPI based plugins like Java.
To re-enable Java plugin on Google Chrome 42 and alter, please follow these instructions:
XXXIII. Type chrome://flags in the browser's address bar and hit enter.
XXXIV. Search for chrome://flags/#enable-npapi on the page. Or, load it directly.
XXXV. Enable it with a click on the link.
XXXVI. Restart the browser.
All NPAPI plugins installed in Chrome become available again.
--------------------------------END-------------------------------------------------
Firmware: v2.01.03
Hardware: B1
Date: 2015-02-03
Mydlink: 2.0.18-b61
Resolved Issues:
1. Fixed a problem which some functions can’t work properly on Mydlink Portal/Live Video tab via the
relay connection.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
-----------------------END----------------------------------------------------------
Firmware: v2.00-b6
Hardware: B1
Release Date: (2014-05-27)
Mydlink Agent: 2.0.17-b70
Initial release.
Known Issue:
1. When zoom out the browser on Sound Detection webpage, the screen cannot zoom out too.
2. Then using Safari for Windows OS to view the camera image, you can’t get a smooth streaming
video.
3. The Java and Plug-In viewer can’t support Web Proxy Traversal.
4. The flicker noise would trigger the motion detection when sensitivity is 100%.
5. There is no warning message display like as Windows OS when MAC OS did not install Java.
-----------------------END----------------------------------------------------------